Help urgently needed! BB curve 8900 dead with red blinking lights on!!!

Hi to everyone! i just bought a BB Curve 8900 last month and now i'm facing aproblem. i am new to this forum and i was hoping you guys can help me out. i connected my BB to my pc with desktop manager to download some music when it prompted me to update my software. So i did, then at the end of the installation, i got fatal error and now all i got is a dead phone with red light blinking every 2 sec. can anyone help me pls?thank in advance and more power to this forum.

First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

Problem solved... just saw the answer in another thread... https://discussions.apple.com/message/13110222#13110222

Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Thanks

Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks

Just a word of advice. Never ever use the word "urgent" on this forum

Help urgently needed with Java RMI task.

Hello All. Please I need help urgently with this task. I cant seem to be able to do this. Here is the task:
There are m squares with side lengths a1, a2, ..., am and a rectangle with the height and width equal to h and w respectively. Find a subset of the squares, which must be placed within the rectangle in such a way that they do not overlap, and cover the maximum area of a rectangle.*
Please all help me solve this task using Java RMI. I would be very grateful for your help. Thanks in advance.

Here is my client.java.
import compute.;*
import java.lang.Math.;*
import java.lang.Long;
*public class Hypothesis implements Task {*
private long start;
private long end;
private int number;
private int count;
public Hypothesis(long start, long end, int number,int
*count) {*
this.start = start;
this.end = end;
this.number = number;
this.count = count;
*public Object execute() {*
return findSolution();
*public String findSolution() {*
long i,j,k,l,m=1,i_max,j_max,k_max,l_max,l_start;
System.out.println(start);
System.out.println(end);
System.out.println(number);
System.out.println(count);
for(m=start+number;m<end;m+=count)
i_max=(long)java.lang.Math.pow((double)(min(p5(m)-3)),0.2d)+1;
for(i=i_max;i>0;i--)
j_max=(long)java.lang.Math.pow((double)(min(p5(m)-p5(i)-2)),0.2d)+1;
if (j_max>i) j_max=i;
for(j=j_max;j>0;j--)
k_max=(long)java.lang.Math.pow((double)(min(p5(m)-p5(i)-p5(j)-1)),0.2d)+1;
if (k_max>j) k_max=j;
for(k=k_max;k>0;k--)
l_max=(long)java.lang.Math.pow((double)(min(p5(m)-p5(i)-p5(j)-p5k))),0.2d)+1;
if (l_max>k) l_max=k;
if (l_max>2) l_start=l_max-2;
else l_start=1;
for(l=l_max;l>l_start-1;l--)
if(p5(i)+p5(j)+p5(k)+p5(l)==p5(m))
Long[] solution=new Long[5];
solution[0]=i;
solution[1]=j;
solution[2]=k;
solution[3]=l;
solution[4]=m;
*return "" solution[0]"^5+"*
solution[1]"^5+"*
solution[2]"^5+"*
solution[3]"^5="*
solution[4]"^5";*
return null;
*private long p5(long n){*
return nn*n*n*n;*
*private long min(long n){*
return n>0?n:0;
I just can't seem to get the whole thing work correctly on the server side. I need it to run from 1 client on atleast 3 servers. Please any explanations will be appreciated.

HELP urgently needed: My Sandberg FireWire for Laptop will not start on my T60

Let me start with information on my T60:
OS information: Microsoft Windows XP
OS version: 5.10.2600 Service Pack 2
Processor: x86 Family 6 Model 14 Stepping 8
Memory: 3.135.856 kb
BIOS version: 2.09 (79ETC9WW)
Machine type-Model: 1951A47
I have just got a new Sandberg FireWire for Laptop, a PC Card with 3 6-pins connectiont. After inserting the card in the PC Card slot, the Windows Device Manager tells me that there are problems with the card. Looking at the 1394 Card Properties the status says:
"This device cannot start. (Code 10) - Click Troubleshoot to start the troubleshooter for this device."
The troubleshooter did not solve my problem. I have tried disconnecting, re-connection, shut down Windows and start again etc.
At Sandberg Help Desk they tell me that I have two slots in my laptop, one with a 16 bits bus and another with a 32 bits slots, and I should use the latter. It seems that I can use the lower slide only in my laptop and I cannot push the card into the upper slide. There is not enough room for it.
Here is what I found on Lenovo's support site on my type & model:
PC Card
Conforms to the PC Card Standard 95
Type II slot
Both the 16-bit Release 2.1 card standard and the 32-bit CardBus card are supported.
Have a look at these screen captures.
What should I do to solve my urgent problem!?
Message Edited by pbl_ibm on 10-09-2008 05:10 AM
Message Edited by pbl_ibm on 10-09-2008 07:27 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM

garytr23 wrote:
Sounds to me like a driver configuration problem. Maybe something bad happened during driver install. I would recommend uninstalling the device from device manager by right clicking on it and hitting uninstall. Reboot the computer. Have a go at it again. Also, test your pcmcia port functionality by finding and plugging in a different card. See if that works. It might need repair.
Message Edited by garytr23 on 10-09-2008 09:41 AM
The status right now is:
The PC Card reader works on my T60
If I use a Firewire PC Card it will not start - as described above (on T60)
The PC Card work properly on my T61P - and I succeeded importing a video file from a digital camera using the Fireswire PC Card.
So what does a wise man do in this situation??
Please help me as I urgently need to know how to solve this serious issue!!
Have you got an idea? Can I import the video in another way??
Message Edited by perbuch on 10-12-2008 07:55 AM

HELP Needed ASAP! Curve Not Turning On, Red Flashing Lights!

Hi,
I have a Blackberry curve 8310. I plugged my curve into my mac to do a software update. Midway through, my phone shut off and hasn't worked since. The battery is fully charged. The phone is off and won't turn on. Additionally, there is a red LED light blinking twice every few seconds. I think I found an article on blackberry.com's knowledge database that diagnosed my issue, but my problem now is that because the curve isn't turning on/off, it's not connecting to my mac's desktop manager. So I can't do anything the article tells me to do. What should I do now? I need help ASAP!
Here's the link to the article: http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB19915
Thanks in advanced!

Hello Asmro and welcome to the BlackBerry Support Community Forums.
It can take up to 30 minutes for the Mac to connect to the BlackBerry.
I would remove your battery and connect to the BlackBerry Desktop Manager. Once it comes up there is no software installed, re-insert the battery and follow the article KB19915.
Let me know how you make out.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Installation problem, please help, urgent needs,

I have install the FCP 7 into my MBP, and updated, but in the "add behavior" tap i don't have those new behavior like "text-basic" "text-continuous" "text-energetic" etc..... how can i add it back?
urgent needs, please help

fixed

Screen Display off with red Notification light

Dear Team I've BB Curve 9320 and am facing display off issue in my phone and regularly red notification light is blinking and keypad light is also lighting. I've visited East Delh(India) and Noida Sec 2 Service center but found there was no service center which address was mentioned there.I tried to update my software but failed into my attempt it's asking password everytime whenever I do a same.   Kindly resolve my issue and share valide contact no. to share my griviance with you people.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):With the battery inside, connect your BB to the wall chargerLeave it alone for 2 hours, no matter what the LED or the display doesRemove the batteryWait 15 minutesInsert the batteryWait another 2 hours, no matter what the LED or the display doesThis has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:Obtain an known good and already fully charged additional battery...use it in your BB and see what happensObtain access to a known good and identical BB...use your battery in it and see what happensThe results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.  If possible, you could also attempt to boot into Safe Mode:KB17877 How to start a BlackBerry smartphone in Safe ModeIt may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When/if successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:KB10144 How to force the detection of the BlackBerry smartphone using Application LoaderKB27956 How to recover a BlackBerry smartphone from any statehttp://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberryprateekasthana wrote:
Dear Team I've BB Curve 9320 and am facing display off issue in my phone and regularly red notification light is blinking and keypad light is also lighting. I've visited East Delh(India) and Noida Sec 2 Service center but found there was no service center which address was mentioned there.I tried to update my software but failed into my attempt it's asking password everytime whenever I do a same.   Kindly resolve my issue and share valide contact no. to share my griviance with you people.  Concerning your questions...refer:http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540549This forum is a user-to-user community, so we have no information about service centers local to you.
Good luck and let us know!

Firxfox installed (without me agreeing!) and update and since then I cannot open it at all. RE-installation didn't help. I urgently need Firefox up and running with my bookmarks intact. Thank you

As mentioned above, when I opened Firefox this morning it installed automatically an update w/o me agreeing and I don't know what was isntalled. Since then I cannot open Firefox. Mozilla Crash Reporter opens and thell me Firefox had a problem and crashed. "We'll try to restore your tabs and windows when it restarts.
To help us diagnose and fix the problem, you can send us a crash report."
I press restart Firefox but I always just get the same message. I uninstalled it and downloaded it again, nothing is changing. I urgentlyu need to use the bookmarks as I don't have them in Explorer which I have to use now.
Thank you

You need "sysinternal's process explorer", it is free and can replace the Microsoft process explorer, that you get by "CTRL+ALT+DELETE". Either program will allow you to kill the instances of FF that didn't die as they should have, when you closed them. Sysinternal is easier to use, it is a graphic display with many options. Do not push "CTRL+ALT+DELETE" twice unless you want to reboot, that is its default behaviour under Microsoft.

Urgent:Please Help. Need to deploy web application with servlet:(

Tomcat 4.0 is already installed.
Trying to deploy a web application and invoke a servlet through it.
Here is the command I am using for deploying the application:
http://localhost:8080/manager/install?path=/NewApplication&war=file:d:\Tomcat4\webapps\NewApplication
The application get deployed. However, I have a problem. As soon I stop and restart the server, this application is gone.
1. Please someone help: How should I make it permanent so that the application stays even if I restart the server.
2. I am not able to access the servlets placed in the /WEB-INF/classes/ sub-directory under NewApplication directory.
If you need I can cut and paste the web.xml file which will show the deployment descriptor.
Please help: How do I make this work. I need it urgent.
Any help will be appreciated.
Thanks,
Indrasish.

The simplest solution would be to put the war file inside the webapps directory and restart the server. You should be able to access the app using the http://servername/app

Help urgently needed with xml reading

hi, i have a 3gig xml file which i am surprised it is so large as i have even shortened all of the names,
it contains 2000 elements which have a filename and an array, each element has an array of size 6000, and each element in this array has an array of shorts, say 100 of them, and also a filename.
i ahve used stax writing to be able to write such a large file without having memory problems.
i then had to program a stax reader to be able to read it all in without building the whole tree but with some large cases i am now getting out of memory again, it seems to eb from the read so maybe the code eve though it doesnt have to hold the tree in memory, it has to hold the file in memory, the code for reading is shown here:
package utilities;
import Categorise.Collection;
import Categorise.Comparison;
import Categorise.TestCollection;
import java.io.IOException;
import javax.xml.parsers.*;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.DefaultHandler;
import org.xml.sax.Attributes;
import java.io.File;
import java.util.ArrayList;
import java.util.List;
import measures.Protocol;
* @author dthomas
public class XMLParser extends DefaultHandler
    static Collection collection = new Collection();
    List<Short> cList;
    List<Comparison> comparisonList;
    File trainFileName;
    File testFileName;
    TestCollection tc;
    List<TestCollection> testCollectionList;
    List<File> testFileNameList = new ArrayList<File>();
    List<File> trainFileNameList = new ArrayList<File>();
    boolean allTrainsAdded = false;
    Protocol protocol;
    List<File> trainingDirList;
    File testingDir;
    int counter = 0;
    /** Creates a new instance of XMLParser */
    public XMLParser() {
    public static Collection read( File aFile )
        long startTime = System.currentTimeMillis();
        System.out.println( "Reading XML..." );
        SAXParserFactory spf = SAXParserFactory.newInstance();
        SAXParser sp;
        try {
            sp = spf.newSAXParser();
            sp.parse( aFile, new XMLParser() );
        } catch (IOException ex) {
            ex.printStackTrace();
        } catch (SAXException ex) {
            ex.printStackTrace();
        } catch (ParserConfigurationException ex) {
            ex.printStackTrace();
        long endTime = System.currentTimeMillis();
        long totalTime = ( endTime - startTime ) / 1000;
        System.out.println( "Done..." + totalTime + " seconds" );
        return collection;
    public void startElement(String uri,String localName,String qName, Attributes attributes)
        if( qName.equals( "RE" ) )
            testCollectionList = new ArrayList<TestCollection>();
        else if( qName.equals( "p") )
            boolean isConcatenated = new Boolean( attributes.getValue( "c" ) );
            boolean isStatic = new Boolean( attributes.getValue( "s" ) );
            protocol = new Protocol( isConcatenated, isStatic );
        else if( qName.equals( "trdl" ) )
            trainingDirList = new ArrayList<File>();
        else if( qName.equals( "trd" ) )
            File trainDir = new File( attributes.getValue( "fn" ) );
            trainingDirList.add( trainDir );
        else if( qName.equals( "td" ) )
            testingDir = new File( attributes.getValue( "fn" ) );
        else if( qName.equals( "TC" ) )
            counter++;
            System.out.println( counter );
            comparisonList = new ArrayList<Comparison>();
            testFileName = new File( attributes.getValue( "tfn" ) );
            testFileNameList.add( testFileName );
            tc = new TestCollection( );
            tc.setTestFileName( testFileName );
        else if ( qName.equals( "r" ) )
         String order = attributes.getValue( "o" );
            String type = attributes.getValue( "t" );
            String value = attributes.getValue( "v" );
            cList.add( Short.parseShort( order ), new Short( value ) );
        else if( qName.equals( "c" ) )
            cList = new ArrayList<Short>();
            trainFileName = new File( attributes.getValue( "trfn" ) );
            if( !allTrainsAdded )
                trainFileNameList.add( trainFileName );
    public void characters(char []ch,int start,int length)
        String str=new String(ch,start,length);
        System.out.print(str);
    public void endElement(String uri,String localName,String qName)
        if (qName.equals( "c") )
            allTrainsAdded = true;
            short[ ] cCounts = new short[ cList.size() ];
            for( int i = 0; i < cCounts.length; i++ )
                cCounts[ i ] = cList.get( i );
            Comparison c = new Comparison( trainFileName, tc );
            c.setcCounts( cCounts );
            this.comparisonList.add( c );
        else if( qName.equals( "TC" ) )
            Comparison[ ] comparisons = new Comparison[ comparisonList.size() ];
            comparisonList.toArray( comparisons );
            tc.setComparisons( comparisons );
            testCollectionList.add( tc );
        else if( qName.equals( "RE" ) )
            TestCollection[ ] testCollections = new TestCollection[ testCollectionList.size() ];
            testCollectionList.toArray( testCollections );
            collection.setTestCollections( testCollections );
            File[ ] testFileNames = new File[ testFileNameList.size() ];
            testFileNameList.toArray( testFileNames );
            collection.setTestingFiles( testFileNames );
            File[ ] trainingFileNames = new File[ trainFileNameList.size() ];
            trainFileNameList.toArray( trainingFileNames );
            collection.setTrainingFiles( trainingFileNames );
            collection.setProtocol( protocol );
            File[ ] trainingDirs = new File[ trainingDirList.size() ];
            trainingDirList.toArray( trainingDirs );
            collection.setTrainingDirs( trainingDirs );
            collection.setTestingDir( testingDir );
}any help would be greatly greatly appreciated
thanks
Danny =)
ps with the amount of data contained, should the xml file be this large? and does ayone know the size difference of holding a filename as a File rather than a string and then creating the file when it is needed?

yes i do need them but i could store them as strings instead if you think that would help? if it never runs out of memory i dot see how i was able to hold all of this information in memory before, as it was all written to file.
thanks

Help urgently needed with edit to tape / print to video error

I have tried to edit to tape and print to video a sequence (0my whole project, worked for way too many nights to let go... so frustrated and sad right now because it doesn't work.
The project is saved on an extern harddisk, my harddrive on teh pc is too full (not big enough).
My camera and FCP connects but all the time I get an error that 'the tape may be locked' . AND I HAVE TRIED WITH DIFFERENT TAPES, none of them were locked!
I am not really sure how to set the camera in this VTR mode... I have tried in the settings to set it in webcam mode... and I have tried without... and I dont have a button or setting called VTR, only a *PLAY' option or a 'FILMØ option....
My A/V settings are FireWire PAL and DA PAL 48khz ... however have no ide what that means or if these should be changed...?
I checked from apple but cannot find my DV cam on the list... hmm, does that mean I cannot do edit to tape recordings???
My Dv cams informations:
NV-GS140 by Panasonic, Model 0x80330B, 0x804580114B5DD1
I checked the system settings and was able to the FireWire/NV-GS140 Unit
I have a MacBook1,1 / Intel Core Duo/ 2 GHz
OS 10.4.11
I use the version FCP 2
Please help me out, I am really without any good suggestions how to proceed!

You're going to have to use a dvd authoring program. Burning the seq to a dvd qill just create a qt movie on a dvd data disc. It won't create a dvd video disc that plays in a dvd player.
Export from fcp a QT movie, current settings, self-contained. Use Anamorphicizer (http://mac.softpedia.com/get/Video/Anamorphicizer.shtml) to make imovie recognise it as 16:9. Then import that file to idvd.
Or you can drop your 16:9 sequence into a new 4:3 sequence to letterbox it, then you can do the export as above but skip the anamorphicizer step.
It's better to use compressor on the original 16:9 sequence and then use dvdsp to author, but if you've never used dvdsp it's a big program to get your head round.
The export can be done in two ways;
1. Export from fcp using 'export using compressor'.
2. Export a QT ref/self-contained movie and import that into compressor.
3. Export a QT movie and import it direct into DVDSP.
The second option will take longer initially (if you use the self-contained option) but will then allow compressor to work in the background, the first option will tie up fcp for the duration of the encode.
Once in compressor use one of the 16:9 dvd presets, depending on the duration of the movie and the quality you want. Don't try to adjust the settings. If your movie is 31 mins just use the shortest option (i think it's 60min) and make sure you select the m2v video and ac3 audio options. If you just select the mpeg 2 video you'll only get video, as you've discovered.
Open dvdsp and create your opening menu and a video track, import the movie file, add it to the video track, and then add the audio to the track as well. Then add any chapter submenus you may want.

Help Urgently Needed With Border

Hi
Please can anyone help me?
I have designed a site and I am trying to put a border around
the whole of the table (not individual cells).
Is this possible to do?
Thank you very much, Louisa

Erp...
<table style="border: 3px solid gray;" ...>
</table>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Malcolm N_" <[email protected]> wrote in message
news:[email protected]..
> On Fri, 3 Aug 2007 15:31:14 +0000 (UTC), "LoobieLouLou"
> <[email protected]> wrote:
>
>>Hi
>>Please can anyone help me?
>>I have designed a site and I am trying to put a
border around the whole of
>>the table (not individual cells).
>>Is this possible to do?
>>Thank you very much, Louisa
>
>
> give the table a css class
> <table class="table1">
>
> and control it with this
> .table {
> border: 3px solid gray;
> }
>
>
> or just quick and dirty
>
> <table style="border: 3px solid gray; </table>
> --
>
> ~Malcolm N....
> ~

Help i need my curve working

ok here is my problem, my batt kept going low kinda quick, so a few nights ago it went dead so i plugged it in to charge after a few min charging it came up with a pic of a battery with a slash thru it so i let it charge all night come the morning no go so i have been looking on forums and heard about the jlcmdr and that didngt work i need help
out of warrenty and want to keep it going so what ideas do yall have

Possible reasons for that
There is one or more energy consuming applications on your device.
The battery is going to die. Replace it with a new one.
If battery is definitely ok - try to wipe the device to clarify the situation:
Backup your device info and wipe the device memory.
Options-Security options- General Settings
select from menu: "Wipe handheld"
after wipe - restore your data back.
Message Edited by tbilisoft on 11-28-2008 08:35 AM

Help urgently needed! BB curve 8900 dead with red blinking lights on!!!

Similar Messages

Maybe you are looking for