Help: USB 3.0 Graphics Adapter

Hi, I am trying to test a USB to VGA adapter on my laptop
lsusb doesn't yield any useful information.
Bus 002 Device 002: ID 2297:3204
On my PCLinuxOS setup, I get some more information out of dmesg
usb 2-4: New USB device found, idVendor=2297, idProduct=3204
usb 2-4: New USB device strings: Mfr=1, Product=9, SerialNumber=2
usb 2-4: Product: USB3.0 Display
usb 2-4: Manufacturer: Grain-media Technology Corp.
Any help would be sincerely appreciated.
Thanks
Bus 001 Device 003: ID 2297:3204
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2297
idProduct 0x3204
bcdDevice 10.10
iManufacturer 1
iProduct 9
iSerial 2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 1
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 16
bInterfaceProtocol 0
iInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Moderator edit: Added [ code ] tags around your listing to make this readable. Please do so yourself in futute. -- bernarcher
Last edited by bernarcher (2012-07-31 09:09:29)

The issue is not with the HDD, it's with the enclosure which has a SATA to USB bridge inside. That chipset is the issue. The NEC driver needs to be updated to work properly, but Lenovo is using a downlevel version for the NEC USB 3.0 Controller. The latest level is 2.1.28.0
As a note, I currently am running the Hitachi Travelstar 7200 750GB drive in the primary location. Flawless performance.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Similar Messages

What USB graphics adapter do you recommend for Lion?

The Apple geniuses told me Kensington Universal Graphics Adapter. It doesn't work, even after searching forever for and downloading the Lion drivers. (Though there is a possibility that it is actually defective. It isn't lighting up when hooked up which I would think it would do even if the computer is not seeing it.)
There are several out there that are Mac compatable but not necessarily compatable with Lion.
I would like to run my MBP in clamshell with 2 external monitors.
I have actually ordered this one: PLUGABLE UGA 125 (displaylink DL-125 chipset) but I don't know for sure that it will work as it doesn't say Lion compatable. Display Link has a Lion driver so I am thinking it might.
Any recommendations would be appreciated!

I found one that works. It is the plugable UGA 125 that I mentioned above. You will have to download the Display Link Lion drivers. It is also only good for resolutions up to 1280 x 1024 so if you have a monitor with finer resolution as I do then you will not have the best look. Fortuntaley I only need it for email, web, etc. while I am running PS and Lightroom on my Dell monitor...so..it works. It only took 6 weeks.

Boot Camp & Windows 7 -- "Standard VGA Graphics Adapter" (This is wrong.)

Hello,
I am hoping I can find some help here, I have purged the internet looking for a solution, all to no avail.
Heres the situation:
I have a 15" mac book pro unibody.
500 gb hdd
4 gb ram
9600m gt graphics
Anyways, I decided to install windows 7 on a partition I made using boot camp, hoping to play the new Dragon Age: Origins game.
Everything went well with the install, except for the graphics card.
When I open the device manager, this is what it says:
www.m2mlinks.com/cs445/images/Capture1.PNG
"Standard VGA Graphics Adapter"
Clearly wrong, clearly does not work with Dragon Age:
www.m2mlinks.com/cs445/images/Capture2.PNG
("Graphics card not supported for this game")
So I don't know what to do, here's what I HAVE done.
--I tried going to the nVidia website and downloading the latest driver for my graphics card, only to have it say this when I try to run it:
www.m2mlinks.com/cs445/images/Capture2.PNG
("There is no drivers in this package for the hardware on your computer")
--I tried going into Device Manage, right clicking Standard VGA Graphics Adapter, clicking properties->update drive->browse my computer->let me pick->picking my latest nVidia folder->picking 9600m gt from the list-> next. This looks like it starts to install, but then tells me that the control panel was not able to install successfully, so its REVERTING to the last working driver, uninstalling and restarting as I scream "Nooooooo!!".
--I tried changing the nvam.inf file, editing the device key value of the graphics I retrieved from running dxdiag, however when I ran dxdiag, it was the same device key as the one already in the nvam.inf file, so that changed nothing.
--Lastly (i just remembered this, I did this first), I tried downloading the latest BootCamp version (2.1 or something?), and this changed nothing as well.
I am severely exhausted and stressed from trying to get this to work, and I am in DIRE need of help, since one of the only reasons I put windows 7 on this was to play video games!!! Please dont let it be all for nothing haha.
Thanks for ANY help anyone can give me, I will answer ANY questions!!
~Nick
Message was edited by: Nick Thomas NT

Boot Camp in Snow Leopard does not yet "officially" support Windows 7, but such support has been promised "before the end of the year." See: http://support.apple.com/kb/HT3920
Presumably the updated Boot Camp will support drivers not currently available, such as the appropriate video drivers. The end of the year looms and there is as yet no word about better support for Windows 7. Lets hope there are new drivers, as there are many others in your situation, although plenty of other people report they are using Windows 7 and Boot Camp. I prefer to wait for the official release by Apple.
Bob N.

Kanex MIni DisplayPort+USB Audio to HDMI Adapter --NO SOUND

Hi,
I just purchased a Kanex Mini DisplayPort+USB Audio to HDMI Adapter for my new Samsung flat screen so I could watch netflix movies. The guy at Tekserve (NYC based authorized dealer) said it's really cool b/c it's audio and video all in one. Two cables are attached to a small box on one side and on the other side of the box is for the HDMI cable which goes to the TV (most of you prpbably already know this) .
The two attached cables fit into the the USB (audio) + mini display port. The video works great, but no sound. I called Apple for tech support and we tried a few things like changing the sound output to USB, but no luck.
I can call Tekserve on Monday, but would love to figure this out before then for the week-end.
Thanks everyone for your help.
Mary

There are actually 2 different Mini Display port to HDMI adapters from Kanex. One supports 2 channel audio through the USB audio out cable, which is the one you have Mary. The other one with the extra audio plug cable supports 5.1 digital audio.
http://kanexlive.com/products/item.aspx?id=3323
http://kanexlive.com/products/item.aspx?id=3495
I don't have either of these adapters but I would think that you "should" be able to go into your System Preferences under Sound. If the USB plug from the adapter is plugged into your MacBook, then it should show up in the output window in the Sound preferences which you would then choose instead of outputting the sound to the built-in MacBook speakers.
At the bottom of the product description page of the adapter that you have (the USB 2.0 version), it says this:
+Sound Output setting on Macs must be changed to "USB Sound Device/USB Type" to have the adapter operating correctly.+*
Let us know if you get it working properly. I'm considering getting one also.
Sorry.... I just re-read your initial post and it sounds like you already DID try switching the sound output to USB with no luck. The only other thing I can think of is the adapter might be bad and maybe exchange it for another one from where you purchased it. Or you could maybe exchange it for the 5.1 digital audio out version. Although it sounds like your sound is going directly into the tv via HDMI and not a surround sound receiver.
Kanex does have tech support and contact links on their web page. Maybe you should email them directly about your problem. Unfortunately I'm sure you'll have to wait til sometime during the work week to get a reply back.

Qosmio E10: Is it possible to upgrade the graphic adapter?

Hello there,
I have a question regarding a Qosimio E10. Is it possible to upgrade the graphics Adapter to a more recent one. (Now : Geforce FX 5200 Go 64 Mb) Because the one i use now is ot of date and I dont want to buy a new notebook just because of a Graphics Card !
Thanks for your help
Marco

Hi
No, its not possible because the graphic card is a little small chip which was fixed on the mainboard. The graphic card design is not the same like on the PC desktop.

XP Mode can't access parallel printer connected with USB to DB-25 adapter

After some arduous work I finally got XP Mode to run on Windows 7 Virtual PC on my Win 7 Pro 64-bit machine. I have an HP LJ 4000 printer that has a Centronics interface with a DB-25 plug.
I used a USB to DB-25 adapter advertised as IEEE 1284-compliant.. I got the LaserJet 4000 installed, and it prints great from Windows 7. But nothing can print to it in XP Mode. The printer is recognized on the (XP Mode) Printers and Faxes page, but that's
as far as it goes. It is installed as the default printer (it's the only one in XP Mode; I didn't bother to install any others). The Win 7 Device Manager lists it under Universal Serial Bus Controllers as a "USB Printing Support" device and says it is working
properly. General properties shows "IEEE-1284 Controller." The XP Mode Device Manager shows an LPT1 port (which does not exist) and says it is working properly. Location is shown as "on Intel 82371AB/EB PCI to ISA bridge (ISA mode)." I haven't a clue what
this means (my motherboard is an ASRock and does not have any LPT ports). The Printer Troubleshooter in XP Mode exhausted itself without finding a solution. I first used the drivers for Windows 95 from the old (1997) HP installation CD for LJ 4000. I did update
the HP LJ 4000 drivers for XP Mode from HP's web site later, but this did not help either.

Hi ,
In a Windows XP Mode, USB devices can be used in two different ways: Sharing and Redirection and
Integration features is enabled by default.
Storage devices, Printers and Smart cards can be used without having to redirect the device manually, by simply sharing it with the host.
Sharing requires the devices are available in both XP Mode and Host OS. If not, you need to use redirect device to Virtual Machine.
Please refer to the following link and follow the steps scenario 2: Use a USB device in a virtual machine to redirect a USB device to a virtual machine.
http://capitalhead.com/articles/windows-xp-mode-in-windows-7-and-virtual-pc---part-3-use-virtual-machine-application-on-windows-7.aspx
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy
of this third-party contact information.
More information for your reference:
Networking and Using Windows XP Mode
Tracy Cai
TechNet Community Support

USB to Parallel Cable Adapter not working with New PC and Windows 8.1

With the demise of parallel ports on PCs, I purchased a USB to Parallel cable adapter several years ago. I used this combination to successfully connect my Apple Laserwriter 16/600PS printer to my HP Pavilion Slimline s7600n PC (running Windows XP, SP3). I've decided to upgrade, I now have an HP Slimline s5-1020 PC running Windows 8.1. However, I cannot get the printer to printer properly. When the print command is executed, the printer spits out page after page of 1-line jibberish at the top of the page. This continues forever until either the paper runs out or I abort the document by opening the paper drawer. Only after full shutdown of both printer and computer and reboot of both will the printer clear itself of the corrupted print instruction.
The printer is also connected to an Apple MacIntosh 7200/120 computer via AppleTalk and it prints fine. Also, I reconnected the printer to my old Slimline s7600n computer and it prints perfectly. I have to assume that either new PC or OS is the source of the problem.
Any and all help/suggestions would be appreciated.
Billvonr

Hi,
You have to go to the maufacturer site to check is there any Windows 8.1 driver for it. I know many cable/adapter vendors stopped to develope from Windows 7.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Issue with Graphic Adapter on a T400 model 6475-CA6 - BSOD daily few times

From the many T400's we have installed there are a few which cause blue screens while working. To us it seems something to do with the graphic adapter or driver or ?? Anyway, when we disable the power saving features to issue is gone..no matter how hard we stress the laptop..the problem has been gone. When we enable the option the problems start again.
We are using Windows XP with SP2
The stop error as described from the event viewer from last days
16/11 19:29 Error code 0x1000 0050 (0xe3e6 9000, 0x0000 0000, 0x8085 bc95, 0x0000 0001)
16/11 19:54 Error code 0x1000 0050 (0xe3f3 3000, 0x0000 0000, 0x8085 bc95, 0x0000 0001)
17/11 10:04 Error code 0x1000 000a (0x0000 0010, 0x0000 0002, 0x0000 0001, 0x8050 93d7)
18/11 12:00 Error code 0x1000 008e (0xc000 0005, 0xbf36 0310, 0xa5c1 1b58, 0x0000 0000)
anyone an idea... ?

mind detailing what power saving features you disabled?
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

How to Switch the graphic adapter in HP DV6-7078Ca

I want to change the graphic adapter from Intel to Nvidia because the intel is only 64 MB
How can i switch to Nvidia which is 2GB

FadiNasan wrote:
I want to change the graphic adapter from Intel to Nvidia because the intel is only 64 MB
How can i switch to Nvidia which is 2GB
Hi,
It's been done automatically. Go to the nVidia Control Panel and have a look at the settings. You can set each application or program to run on a different graphics card but it's been set to auto as default. Auto means that the default card is the shared Intel HD X000 for a common usage but when you start playing games or run a video editing program it will automatically swich the graphics to nVidia. The Intel shared graphics has more than 64MB of RAM. It uses the main laptop RAM so in case that you have got 8GB of RAM the Intel HD graphics could take up to 1.5GB of RAM from it. Means that the laptop reserves up to 1.5GB of RAM for the Intel card and the rest can be used by the system.
http://ucdavistechtalk.wordpress.com/2012/05/29/how-to-switch-between-intel-graphics-and-nvidia-with...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

STANDARD VGA GRAPHIC ADAPTER

i have a hp110-025il desktop its standard vga graphic adapter is outdated but it says that it is up to date.so many games dont work.please help
This question was solved.
View Solution.

Oh...and I was supposed to know that how, since your PC came with Windows 8?
You shouldn't keep things a secret.
Try this driver.
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23405&lang=eng&OSVersion=Windows%207...

Standard vga graphics adapter of hp 110-025il update problem

sir,
i have a hp 110-025il desktop whose standard vga graphic adapter is not updating.
driver date-6/21/2006
driver version-6.1.7600.16385
please help to get me update
This question was solved.
View Solution.

Hello ANIL94544128. Thank you for posting on the HP Forums.
I understand you are experiencing issues updating the computer's VGA graphic adapter. Without the operating system of the computer, my troubleshooting suggestions are limited. I can suggest to utilize the HP Support Assistant to update your drivers. For more information, please reference this HP document: http://h10010.www1.hp.com/ewfrf/wc/document?docname=bph07165&lc=en&cc=us&dlc=en
Let me know if you have any other questions or concerns. I'm only here to help!
Mario
I worked on behalf of HP.

Standard VGA Graphics Adapter problem ot hp dv7-6178us

Hello, I have the problem with Standard VGA Graphics Adapter and I can't find a solution for it?
Can someone help with this driver?
Thanks!

Hi:
You need this driver for the graphics setup in your model...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105178-1&cc=us&dlc=en&lc=en...

I dont have the proper graphics adapter

So i recently dual booted my Macbook pro with windows 7 32bit OS, but now when i try t update the drivers for my AMD Radeon HD 6770M it says that i cant have the updates due to not having the proper graphics adapter. How do i update my graphics drivers? And where do i get the drivers from cause the AMD website isnt working and i havent found any 3rd party sites offering much more help.

Intel drivers can't install until you uninstall Acer's Intel VGA drivers. To check drivers support:http://us.acer.com/ac/en/US/content/support keep in mind that only this models will have Acer driver support for windows 10:http://us.acer.com/ac/en/US/content/windows10-eligible-models

NVIDIA NVS Graphic adapter support KVM-Intel AMT/vPro?

Hi there,
I have a Thinkpad T410, Intel core i7, Intel Centrino Advanced-N 6200 AGN and the NVIDIA NVS 3100m Graphic adapter, I asked to Intel and that adapter does not support KVM:
http://software.intel.com/en-us/forums/showthread.php?t=78585&o=a&s=lr
I need to use KVM and I cannot understand why if the Lenovo product review shows the NVIDIA adapter supports AMT why it acually does not support KVM, so it does not really support AMT (it's just a partial support):
http://software.intel.com/en-us/forums/showthread.php?t=76173
So, I'm forced to lose a good NVIDIA graphic card for an integrated one, the question is: can I change to Intel Graphics Media Accelerator 57000MHD-AMT? -it's a cheaper one-
Help!
Solved!
Go to Solution.

Hi javiercaceres!
According to the Hardware Maintenance Manual, it's part of the system board, so the graphics adapter can't be swapped out.
I don't work for Lenovo. I'm a crazy volunteer!

Bios update failed on MSI TI4200-T8X64 graphics adapter

during the installation procedure of a new desktop we proceeded the update of live update 2 to live update 3 -
afterwards we checked the availability of a new vga bios and tried to install it to the MSI TI4200-T8X64 graphics adapter of the desktop -
the installation failed and after the reboot the graphics adapter did show any results anymore -
so we had to insert a second vga card (pci) and swith to primary pci vga usage in the desktops bios -
so we are able to start windows, but we are not able to get a functional bios via live update 2 or 3.
where do we get a functional bios version and the flash-tool for our graphics adapter????
thanks for your quick help!
christian

I think there should be a jumper on that card, I have the 4200 VTD128 8x model and there is a jumper with a green shunt. Look in the Bulletin at the top of this VGA forum, there are instructions on how to recover from a bad BIOS flash(If the jumper is present)
If not, Please give the number on the BIOS sticker, it should say for example:n8894MS100 something like that.
What is the part number in white silkscreen lettering on the fan side say?

Help: USB 3.0 Graphics Adapter

Similar Messages

Maybe you are looking for