HELP - USB Controller Shows up, but won't work

I bought a USB controller off eBay and it is reconized my Mac OS X under System Profiler and ControllerMate http://img523.imageshack.us/img523/8374/picture2tx2.png
and it wont work, help would be much appreciated.

Your picture looks like you have a USB joystick and it is working. You need some program that uses a joystick (no standard system routines uses one) - what programs have you tried ?

Similar Messages

Help! Itunes & quicktime installed but won't work

Would someone please help?
I just got a ipod nano and installed the software from the cd that came with it, the installation installed ok and then when I went to click on itunes I get the following msg:
" Itunes requires quicktime to run, please reinstall itunes".
I have quicktime installed, and it still won't work.
I have tried removing all itunes & quicktime files and downloading again via the cd and directly from the website and still the same problem.
I'm really frustrated.
ipod nano 1gb Windows 2000
ipod nano 1gb Windows 2000

hiya!
just popping by to drop off a link to a QT standalone installer:
Quicktime 7.0.4 Standalone Installer
(the link to a true standalone QT on the QT Player download page can be a bit difficult to find. the most obvious download link on there leads to an itunes/QT installer bundle.)
love, b

Alesis mixer w/usb: sound pref. shows devise but won't imput

I have an alesis usb8. When I tried us it with my imac, my sound pref. recog. the usb imput, but will not allow the the info to pass to my cubase prog. or my gar.band. The only thing I get is a high freq. pitch sound. I have tested the cables and the mixer at the music store and everything checks out ok.Everyone I have talked to, thinks it may be a hard drive prob. Help! Can't afford a big bench fee.

My bad on the version. I do have 10.3.9. All cables are ok, I have tried @ lest 6 diff. ones. As far as the sound pref. is concerned,usb imput shows up but will not but recv. the signal from the mixer. I don't find midi file info any where in the settings.

I am trying to transfer my upgrade to my second line. When I try to order any other phone it works fine, but won't work to upgrade to Iphone 6

I am trying to transfer my upgrade to my second line. When I try to order any other phone it works fine, but won't work to upgrade to Iphone 6

TWRING,
Help has arrived! Since the device is currently on pre-order when processing the order online it will only recognize the line eligible. Once you receive the device you may activate it on another line if needed.
EfrainM_VZW
Follow us on Twitter @VZWSupport

HT4557 I have iPad 2 and trying to connect to apple tv. Have gone into videos and music and put in my apple id and password but won't work. Pick up my PC fine though

I have iPad 2 and trying to connect to apple tv. Have gone into videos and music and put in my apple id and password but won't work. Pick up my PC fine though.
Any ideas? Have tried usual switching on and off again but no change

Here’s what you need to do to turn on AirPlay Mirroring on your iPad 2:
– Have iOS 5 installed on your iPad 2
– Make sure your Apple TV software is up-to-date. You can check for updates on the Apple TV by going to Settings > General > Update Software.
– Have your TV turned with Apple TV active and showing.
– Double-tap the home button on the iPad to bring up the Multitasking Bar.
– Swipe to move to the left of the Multitasking Bar, so you can see the set of controls just to the left of the volume adjustment slider.
– The button just to the right of the Fast Forward button – the one that has a rectangle with a solid, upward-facing arrow in it – is the AirPlay button. Tap to switch from iPad to Apple TV.
– Once you do that you’ll see the Mirroring section appear just below the entry for Apple TV. Just tap to turn that On, and the iPad 2 will immediately begin mirroring to your TV screen.

Apple TV2 airplay audio (via Airport Express) works well with music, but won't work with any video.

I have an ATV2 and Airport Express connected to speakers all connected to the same network. It all works with music, but won't work with any video audio. In my ATV's settings I've selected my AirPort Express speakers. It works for music, why not everything else? Is there a fix or work around?

Netflix is first on that list...What I mean is, if there is a feature that allows for a wireless audio connection to the Apple TV, why wouldn't the developer allow it. To keep me from enjoying a more convient connection? I can have the same listening experience on a wired connection...

I bought an unlocked iPhone 5s from USA and travel back to my counry but won't work in my country

I bought an unlocked iPhone 5s from USA and travel back to my counry but won't work in my country

Well, there is nothing anyone here can do for you. Did you actually purchase it at an Apple Store, or at another retailer like BestBuy, HH Gregg, a mall kiosk, T-Mobile, AT&T, etc?
The ONLY source for unlocked iPhones in the US is Apple. If you purchased it anywhere other than at an Apple Store, you purchased a locked phone.
You can call AppleCare and give them the serial number of the phone to confirm the status of the lock.

Files from collaborated/shared folder show online but won't sync to my laptop

I have two CC accounts. One at work and one for my home business. Sometimes I want to share files between the accounts so I use the collaborate feature. The problem I have run into is the files will show up online but they won't transfer to my laptop. The main folder shows up but it's empty. Am I missing something? It's really strange that they show up online.

Do not know which operating system each machine is, but Windows is more restrictive in terms of file names. See this help article: Error: "Unable to sync files".
Please email me the log files for desktop sync (CoreSync) for both machines at [email protected]
The location for each OS are:
Mac OS X: ~/Library/Application Support/Adobe/CoreSync/CoreSync-yyyy-mm-dd.log
Windows: %APPDATA%/Adobe/CoreSync/CoreSync-yyyy-mm-dd.log
Note that on Mac OS X to see the user library from the Finder click on the Go menu and hold down the Alt/ Option key. Note that on Windows %APPDATA% is a variable that will change to the correct path depending on if version of Windows being used.

All pics loaded onto iphoto or preview show up but won't let me edit. Thanks, Woody

Hey everyone,
Pics loaded into iphoto or preview show up in the programs and my desktp, but won't let me edit.
Thanks, Woody

How are you trying to edit?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

USB Mic Shows up but not working

I have a USB mic to be used for dictation. When I had Tiger it would show up and when I would select it as an input device I would get "bars" on the sound control panel, but never really worked for recording. Now on Snow Leopard it shows up on my device list, but I can't actually use it as an input or output device, no sound comes out. It is a Philips SpeechMike II and I know that they don't have a mac driver. However, I didn't know if anybody has any suggestions to get it to work. It is essentially the only thing left that doesn't work on my Mac (vs a work PC). I have tried the Linein software with no success. Any suggestions??? Thanks.

Does it show up in the "Input" tab of "Sound" system preference? If you move the volume slider to the right, does sound make the bars move? You can record with QuickTime Player. Select "New Audio Recording" in its "File" menu. Move the volume slider to the right in the recording window to hear the microphone.

PLEASE HELP! Songs showing up, but missing? HELP!

Yes, I know I've already posted this in another category. I'm not spamming to get answers, I just realized it was in the wrong category (the one I already posted).
So.....here's my problem.
I accidentally unplugged my iPod without hitting the "Eject" button first, and now my iPod's acting strange. Which I don't get; I've done that several times before (on accident, obviously), and they never got screwed up like this.
All my songs, playlists, etc. are showing up, but when I hit Play, they don't work. The play icon appears in the upper left hand corner, but nothing happens with the song. My headphones are plugged in all the way (although, they are pretty worn down), and the iPod's not frozen. It just says its playing, but the song doesn't play or progress (the timeline stays on 0 seconds).
But...I can still pause it, adjust the volume, rate it, look at the menu, play games, all that. So its obviously not frozen.....
And, when I put new songs on there, they worked fine, so did my photos! So, were my old songs erased somehow, but still showing up? sigh Normally I would just put the old songs on the iPod again, but....I'm on vacation. Three hours away from home. I've reset it more times than you can imagine. It didn't work.
HELP! Is there any way to restore the songs....without driving three hours first?
(EDIT: OH **** IT. I POSTED IN THE WRONG CATEGORY AGAIN. GAY COMPUTER.)

I had the same problem - but could be caused by different issues. My issue was that more than one person was logged into the computer when the Nano was connected. For some reason it then mounted as a physical drive which could be seen by the other user (the iTunes preference was set to NOT mount as a drive). The issue is serious because the second time this happened it froze the entire machine. Anyway, I have found that only the "owner" of the Nano should be logged in when it is connected and it should behave properly.
If this isn't your issue, then try just closing iTunes - the "Do Not Disconnect" sign should turn off. If not, then log out and turn off the computer. You will not lose any files on the Nano.
Cheers
Rudy

TS1398 app store continues to show "loading" but won't complete

Appstore continues to show "loading" and won't complete download. Have checked wi-fi connection and reset settings.

also I am not able to stop the download to get rid of the loading app pictures...
at the bottom of the blank "loading app" picture it says waiting..
I tried going to log out of my itunes account but I am not able to click on my account ID, so I cannot sign out.

Keyboard lights up but won't work

Hi
I have a 2010 13" MacBook Pro with the 2.66GHz processor and 4gigs of ram. Yesterday when I was using it, the screen went yellow and the fan started spinning quickly so I turned it off. Now when I restart the computer, I get to the login screen, and the keyboard is fully illuminated but I can't type anything or move the cursor with the trackpad. Even my apple wireless keyboard and magic mouse won't work even though they normally would at that login screen.
I tried doing the apple hardware test and it said that there was no problem. The fact that I was able to hold down the 'd' key and get it to start the hardware test shows that the keyboard isn't broken, so I don't know why it isn't working.

Power button
If you press hold the power button for about 1.5 second slleep function will be initiated.
If ypu press and hold the power button for 5 secondsor more, Mac will shutdown.
Keyboard
Reset PRAM. http://support.apple.com/kb/ph14222
Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
A new Mac is in warranty for 1 year from the date of purchase.

PDFMaker loads but won't work in Word 2013 - Acrobat XI and DC - Win 8.1 Pro

OK, I opened a question that never got answered and it never was resolved...
Just updated to Acrobat DC - same problem exists...
I'm running Windows 8.1 Pro fully up to date..
I've uninstalled and reinstalled Office 2013 Pro (I have an Office 365 subscription so it's the click-to-run install).
I've uninstalled and reinstalled Acrobat Pro DC.
I've rebooted (a full restart, not Win 8's fast boot restart) between each installation.
I've tried this in multiple Office applications, none of them work EXCEPT for Outlook.
For the following I will use Word as my examples...
I've uninstalled all plug-ins and still it won't work.
I've tried running Word as Administrator.... still won't work.
OK... so this is what it looks like... as you can see the toolbar loads, but no icons...
https://www.dropbox.com/s/wsbs4kon3z4e965/Word%20Acrobat%20Screenshot.jpg?dl=0
When you click on those buttons... it goes through the motions as if it were creating the PDF... but no file is ever created...
If I right-click on a Word document and select Convert to PDF - it goes through the motions of creating the PDF, asks me where to save... and then a dialog box named "Acrobat PDFMaker" comes up saying " {Exclamation Point Yellow Triangle Icon} An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF."
If I right-click on a text file... and select Covert to PDF, it immediately pops open a PDF of the text file. Same with any image file.
This was all working perfectly up until out of nowhere it stopped working on January 26, 2015. See my original posting here: Acrobat XI Pro Word 2013 add-in stopped working
I can Print to PDF using the PDF Printer without any problems.
Creating a PDF in Outlook, no problems...
I'm hoping somebody can figure this one out... I'm completely stumped.... and I'm usually very good at troubleshooting stuff.

Click to Run according to Microsoft:
https://technet.microsoft.com/en-us/library/jj219427.aspx
"Click-to-Run is a Microsoft streaming and virtualization technology that reduces the time that is required to install Office and helps you run multiple versions of Office on the same computer. The streaming technology enables you to download and begin to use an Office product before the whole product is installed on your computer. The virtualization technology provides an isolated environment for Office to run on your computer. This isolated environment allows you to run the latest version of Office side-by-side with an earlier version of Office that is already installed on your computer."

PS downloaded via CC seemed to download fine but won't work. Won't even open a file/document.

I recently got a new computer and I have CC so I downloaded the CC app and downloaded LR and PS. LR runs/works fine. PS seemed to download ok but won't even open a new file:picture. I am very frustrated as I have spoken with CC tech support and they were of no help, in fact that didn't even have a clue how to navigate Windows 8! I have been working on this for a week and now very behind on my editing. Not sure who to call or what to do. Please help!! Thank you!!!

What does the crash report say about the name of the faulting module?
Yes, crashes like that are usually due to the video card driver. (though I was guessing from the original description that the image was just not drawing)
Have you tried disabling GPU drawing in Photoshop before opening a document?
Have you updated your video card driver from the GPU maker's website?

HELP - USB Controller Shows up, but won't work

Similar Messages

Maybe you are looking for