HELP USB PROBLEM WINDOWS XP
I've done nothing to my computer in software or hardware for this to happen, and everything that uses a USB connection like a printer or a mouse works with all my laptop's ports, but now every time i try connecting my iPhone to my computer it keeps giving me this "do do do" sound that windows XP makes when a USB connection failed. I've tried like 5 different cables including an ipod sound dock and it never works all of sudden and I didn't even do anything... I went to the mac store and it worked fine with their computers, why is this happening to my computer, all other USB devices work fine just not my iphone, i've tried doing system restore and uninstalling all USB drivers and it didn't work. Does anyone have any help?
Try updating all your drivers on your Toshiba laptop.
Here is a link to all the downloadable drivers.
http://www.csd.toshiba.com/cgi-bin/tais/su/susc_modItemList.jsp?moid=1021512&rpn=PQF20U&ct=DL&BV_SessionID=@@@@0571584413.122 1882453@@@@&BVEngineID=cccfadefeldkeihcgfkceghdgngdgmn.0
Similar Messages
-
My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?
Please do 2-3 SMC and PRAM resets back to back and retest. Also use new cables, they can go bad.
Intel iMac SMC and PRAM resets -
Keyboard USB problems on booting windows xp
I have a problem with a keyboard and mouse logitech as USB. If I activate BIOS's option USB KB/Storage Support, windows xp does not boot and if I deactivate the option, the keyboard does not work until does not come to the screen of logon. Someone knows since I can solve it?, happens to me so much in a mobo MSI Neo4 Platinum and in a MSI Neo2 FIS2R. Thank you in advance.
A greetingMake sure you are plugging into a rear port unless you have carefully checked the front ports wiring harness. If pin 9 is still on the front port harness then you have a USB problem. Also make sure you are not using the KB through a hub as some hubs won't work. Use the latest bios as it has legacy device support as well and it must be turned on in Bios in order to work well with most KB's.
-
Quick time 7 installs without any problems (Windows 7) but it won't at all... help please.
I've installed Quick Time 7 without any problems (Windows 7 - PC) but it won't run at all. QuickTime Player or PictureViewer. I've uninstalled and reinstalled several times also selected "repair" from the uninstall menu. Their are no error messages when I try to run Quicktime. Any ideas?
Okay. It's not likely to be a display preference issue then.
We'd better check to see if some other application has stashed old versions of QuickTime componentry down in your system files. (Error-mesage-free launch failures can sometimes be a symptom of that.)
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
Okay so first things first this isn't the newest macbook pro. When I open about my mac and go to system report it says it is a Macbook Pro 3,1 and the Boot Rom Version say MBP31.0070.B07. Originally when starting up Boot Camp Assistant there where only two options, the "create windows 7 bootable usb" was not there at all. So after some editing and helpful tutorials I was able to get the option show up and created a bootable usb with windows 7 and downloaded the support software onto a separate flash drive. Finally I did the last step and created a second partition for windows. Once the process is complete my computer automatically restarts.
This is where the problem is. Once my computer makes the booting up sound it doesn't load up windows it gets stuck on a apple logo as if it's trying to reastart normally and can't. So I shut down and this time I hold down the option key during start up. It brings up the main partition and some recovery thing but no windows partiton and no bootable usb.
I forgot to mention that I am running OS X 10.9.3. Okay any body want to help me out? Iv'e been at this for hours and can't get an inch closer to having windows. Please and thank you!
P.S. If I missed a discussion that answer my question just point me to it. Iv'e been looking for a while, but who knows i might have missed one.The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.
-
Had the desktop only a couple of days.
Trying to download music/files etc from usb drive. System freezes after a short while having downloaded a small number of files. All the data was download from an older Pavillon using Windows 7 to SanDisk pen drives etc.
The USB drives work fine with the older machine.
Any help with sorting the problem would be appreciatedHello @Anglia101,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop computer is not able to transfer data from your USB drive, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Troubleshooting USB connections (Windows 8). This should help enable your system to read the USB drive with your music files on it. I wil also need to know if a different USB drive is able to transfer data to your desktop.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
L505D-LS5001 no audio / no usb problem
i been having problems with my audio and usb drive, allready try installing drivers and nothing..
the audio tells me no audio output installed.
and the usb and sd card slot wont work eider. runnning windows 7 32bit , audio driver is microsoft audio highdefiniton with the yellow (!)
when i try to install laptops drivers go to the best drivers allready install.
usb problem i really dont know whats the problem..Laptop still on warranty.
Any help pleaseI have run into this same issue; it seems to occur that in device manager, no USB host is even present. Audio just has a red "X" on it.
I've tried installing the drivers, updates.
I restored from the Restore discs from Toshiba (which just crash)
I've done an install from a straight WIn7 X64 disc (which works, but then Red "X")
I've tried changing memory, HDD..
I've tried bootable LInux, which also doesn't see a USB controller.
This is very annoying. This seems to have happened after someone flashed the 1.10 BIOS onto this (I have an L505D-LS5007)
Something here is very amiss, and a laptop with no USB, no Audio is almost worthless. It's as though the BIOS control for the southbridge is wrong. I've tried re-flashing with 1.10, no difference.. I'd love to be able to rollback to 1.00, but I can't even find it. -
NI USB-8473 Windows can not find Driver
After I install my CAN Software 2.6.1 and connect my USB device, Windows starts the Hardware Wizard but, can not find the Drivers for this device. I started out with 2.4 and uninstalled and reinstalled it which did not help and then I upgraded to 2.6.1. This did not seem to help either. My impression is that this is something to do with Windows or the computer, but I thought I would ask if anyone has seen this problem before in case it is a hardware or software issue.
Solved!
Go to Solution.Hi,
Thank you for your post. The NI-CAN driver is an inf file titled nican.inf. Instead of automatically detected the driver in the Found New Hardware Wizard, try browsing to the nican.inf file. This file is found in the following directory: C:\Program Files\National Instruments\NI-CAN\staging.
If this doesn't work, I would run the Microsoft Windows cleanup utility linked below and remove all NI-CAN registries from your system and then reinstall the driver once again.
http://support.microsoft.com/kb/290301
Regards,
Todd V.
National Instruments
Applications Engineer
NI Prototyping Community -
Very stranae usb problem!! K8N NEO2-FX
Hello all
I am having some really strange usb problems
Things that work:
my sandisk memory stick usb reader fine,
most cheap mp3 players (Not all tho)
my sony camera lead works,
game pads fine,
crucial 512 flash pen fine
Things that dont work:
my sons sandisk usb card reader microSD wont work
Cosair 4 gb wont work(that Pi**ed me off).
Nokia 6300,Samsung J600,Samsung D900I,Nokia 5300.
When i put things in usb ports onboard or case it asks for the driver for the device.Then says there is a problem with the install and the device can be used.
I have re-wired the case as per case and MB manuals,i flashed to 1.D.Have tried all the nforce drivers out there!!Its just so random why will it use some usb thing and not others??
Thanks in advance to any and all help given.
Yes
Sorry its XP PRO SP2 installed as well.
The motherboard driver is currently
Version: 5.11
Release Date: November 2, 2005
WHQL Certified
Installation Notes
Windows XP users must install Service Pack 1, at a minimum, prior to attempting to install this package. Failure to do so will result in the inability to support USB 2.0.
Installation of DirectX 9.0 or higher is required in order to use NVMixer.
Release Notes
General compatibility fixes for nForce3 motherboards
Driver Versions
Audio driver version 4.42 (WHQL)
Audio utility version 4.44
Win2K ethernet driver version 4.16 (WHQL)
WinXP ethernet driver version 4.16 (WHQL)
Ethernet NRM driver version 4.82 (WHQL)
Network management tools version 4.88
GART driver version 4.36 (WHQL)
Memory controller driver version 3.38 (WHQL)
SMBus driver version 4.04 (WHQL)
Installer version 4.46
IDE driver version 4.46 (WHQL) -
Did a search of the forum but didn't find any report that seemed the same (sorry if I missed it)
When turning the system on, USB-devices are most of the time not recognized - all settings are ok, the drivers are there, no problems I can discover - until I remove and reattach my USB-devices. At the next soft reboot, they will still be recognized. If I turn the machine off again, I'll have to reseat everything again, kind of uninteresting and tedious after a couple of weeks now.
I have the latest BIOS (3.3), all devices work flawlessly after reseating, and the fun part is that this phenomenon occurs in both Windows 2000 Pro (all updates installed) and Mandrake Linux 9.0 (all updates installed).
The system is currently a little OC'ed, but this happened on the vanillasystem as well. The currents are well withing specs according to the hardware manager of W2K, and all voltages are also within spec (says Hmonitor and AIDA32). I'm at a loss. Any ideas appreciatedI'd doubt it is my memory, but Bonz, sure, here's my entire spec and how I run it minus the PSU. I can dismantle the machine and check what specs it has if you wish:
MSI K7N2G-L (MS-6570) BIOS rev 3.3
Athlon XP1800+
2x TwinMOS PC2700 CL2 256Mb (in dual channel)
IBM Deskstar 180GXP 80Gb ATA-100 (on IDE0)
Compaq DRD8120P DVD (on IDE1)
Samsung CDR(W) SW-408B (on IDE1)
Compaq MV740 17" Monitor
Tt Volcano 11 XE CPU cooler
Tt DDR-coolers (1 active w/fan, 1 passive)
2x 8cm Papst chassis fans
1x 8cm Delta chassis fan
1x 4cm fan on mainboard
PSU: 360W
PS/2:
Kinesis Ergo Elan keyboard
Logitech Trackman Marble +
USB:
Logitech Wingman Extreme 3D
Logitech Wingman Formula Force GP
Logitech Wingman Gaming Mouse
Flashmate 4-in-1 Memorymedia-to-USB adapter
Sharp Zaurus SL-5000D w/cradle
I'm running at 10.5x175FSB (ie 1842MHz) and the memory at 3-2-2 CL2. Don't let that scare you though, as this USB-problem occurs also at 133 and 166FSB, and with memorytimings by SPD (horrendously slow). Nothing is warm and I've installed a fan at the Mainboard heatsink to keep it cooler too.
As I said, this occurs in W2K Pro (SP3) and Mandrake Linux 9.0.
I'd expect behaviour like that from a severely OC'ed system, but not from my modest OC (or from no OC at all). I even backed down a few MHz to let the poor onboard GFX have an easier life 'til that 4800SE ends up inside it. Then there'll be no telling what will happen...
(Sidenote: the DirectX-tests (DxDiag) says the on-board sound do not support hardware buffers. As the SB Live do hardware buffers, that would mean the onboard sound is in some way inferior to a Live from the non-soundquality point of view but rather from system performance?)
EDIT: wonkanoby, I have tried your solution. I'll tell if it seems to help or not. Thx. -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove
Hi marsano,
Usually the only reason it will ask you to reboot is if there is a file that must be modified that the updater doesn't currently have access to. You should try running the Firefox program once as Administrator:
* Right-click the icon and choose ''Run as Administrator''
If that doesn't help then do a clean reinstall.
# Download a fresh copy of Firefox from the [http://www.mozilla.org/firefox/fx/ Mozilla download page] and save the file to the desktop.
# [[Uninstalling Firefox|Uninstall]] your current version of Firefox and remove the Firefox program folder before running the new installer.
# Run installer
Remember that you don't want to remove personal data when uninstalling. That way you'll still have your personal information.
Hopefully this helps! -
HP D017TU Laptop - Windows Help ans Support window started popping up and i can't get ride of it
Just purchased a brand new HP D017TU Laptop so nothing been done with it. I installed windows 7 on my HP D017TU laptop. it was working fine.
Then 2 days ago the Windows Help ans Support window started popping up and now I can't get ride of it.
I have tried the following things to get ride of the issue,
1) Format windows 7 os
2) Delete All partition and re-create
3) Re-install windows 7
Does anyone know how I can stop this happening.Hello SaravSB, welcome to teh HP Forums.
I see that you're having an issue where the Windows help and support is popping up. I will try to help you with this.
I've looked into this for you, it seems this was an issue from back when Windows 7 launched. Any "solutions" also seemed to vary user to user. You may want to try contacting Microsoft for support on this. I was able to find a couple of posts off the answers.microsoft.com forums.
"SuperJbye replied on July 14, 2013
Hello
I found a simple yet effective solution for this problem, my friend had the same issue so instinctively as a technician, I suspect this was a malware of somekind so I re-formatted and installed Win7 funny it's still there, so I did a Hard disk wipe using Dalvik's and re-partitioned and formatted again, to my surprise it still have the same problem.
So I ask Mr. Goo' old Mr. Google for answer, but I've found more complications, sorry for the story, so without further a do, the solution.
Boot to safe mode. (may also work in "normal mode")
Go to Task Manager>
Click the Services Tab>
Right click "HelpPane.exe" or Help and support service>
Select Properties>
Click the Security tab>
Click the Advanced tab (for permissions options)
Then select the "permissions entries" one at a time>
Click Change Permissions>
Then click Edit>
CLEAR ALL THE CHECK BOX FOR ALL ENTRIES
This should prevent access to the HelpPane.exe to all users/programs.
This resolved my friends Windows 7 "Help and Support thingy" issue, hope it does yours too.
Message me for questions and/or clarifications/corrections.
Thank you"
"EddJosh replied on April 29, 2014
In reply to Danel...'s post on April 28, 2014
To fix the problem of the help pane appearing everytime you start windows do the following:
1. Run 'msconfig'
2. Go to the 'Startup' tab
3. One of your 'Startup items' is causing the pane to appear and you are going to have to find out which one it is! Untick ALL the items and reboot. The help pane will not appear harrah! Rather than adding the Startup Items back in one at a time and rebooting a hundred times, tick half the programs back in and reboot. You can find the culprit in about 5 reboots if you do it logically and add/remove half/quarter etc at a time.
4. Finally you will be left with all your Startup items ticked and the guilty program unticked (and that annoying help pane will no longer be appearing)
5. Now delete the guilty Startup Item from the registry (which will also remove it from the msconfig startup tab.
6. Open 'regedit'
7. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\MSConfig\startupreg and delete the guilty program folder. BACKUP YOUR REGISTRY FIRST!
8. You're welcome."
Both of those, as well as other steps are located in this thread: Windows 7 "Help and Support" keeps popping up.
You could try those suggestions and even give that thread a read over, other wise the best option would be contacting Microsoft as stated above.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
ThorBack up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
all other web browsers when i use on my net book show full web page but with Firefox i have to scroll side ways cant see full width of page sometimes Firefox will show full page but this is not often are the settings in Firefox to help this problem i have the latest version of Firefox 4.0.1
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.
Maybe you are looking for
-
A question about inheritance and overwriting
Hello, My question is a bit complicated, so let's first explain the situation with a little pseudo code: class A {...} class B extends A{...} class C extends B {...} class D extends C {...} class E extends B {...} class F { ArrayList objects; // co
-
8GB ipod touch keeps freezing up and won't run apps correctly
I have an 8GB ipod touch that is almost a year old and it keeps freezing up. Some apps that use the motion side to side to move objects, doodlejump for example, won't work. I have reloaded apps and restored the ipod and it is still having a problem
-
Transport of Member Access Profiles
Hi, I created a significant number of member access profiles in DEV and had these transported in QA. I attached these profiles to users and they were working properly in DEV. However, after the transport , I attached the transported profiles to users
-
My Pavillion G6 - 1a52nr gets error code (ks.sys) upon startup
My computor keeps restarting because of error code (ks.sys), it then restarts auto and I can not do anything. Any suggestions. And I am not able to troubleshoot since I can not keep it on long enough. thx
-
I have 1052 files found in the 'entries' folder as above, but can only recover 105 of them. The attached image shows info for 2 files dated October 22 and 23 2011 which I can recover, but the two files dated October 20, 21 are not recoverable. http:/