HELP!!! usb2.0 support with MSI K8T NEO

Can any one tell how to get the usb2.0 to work under XP withuot Service Pack 1???
I really can't download all the sp1 with my dialup...
so ..please help
thanks

there is a few options
one is download the express...shoertened version of sp1
second is request a cd from microsoft.
third is get a buddy on broadband to download it and burn it to a cd.

Similar Messages

Problem with MSI K8T NEO-FIS2R

When I boot my computer I get a message invalid boot.ini then it says c:\windows and windows starts normaly. What I don't understand is why do I get invalid boot.ini Anyone knos how to fix this?

I'm sorry for no specs. Here you go
MSI K8T NEO-FIS2R
AMD 64 3000+
2X 512MB 400MHz Ceon CL=2,5
HDD 120GB WD
HDD 4GB SEAGATE
CDR DVD-RW NEC ND3520
CDR SONY
400W POWER SUPLY
primary master CDR DVD-RW
primary slave NONE
secondary master CDR SONY
secondary slave HDD 4GB
and last HDD 120GB on primary raid
NONE on secondary
I have ORIGINAL windows xp with sp2 on 120GB HDD. I bought this computer and they put windows xp on my system.

Card Reader problem with MSI K8T Neo

Hi,
I have the K8T Neo motherboard, and every once and a while my Atech Flash 9 in 1 card reader (http://www.newegg.com/app/ViewProductDesc.asp?description=20-176-003&depa=0) doesn't power up, thus I can't use it.
What's odd is that all my other USB devices work flawlessly.
The only way I'm able to use the card reader again is to power down my computer and then flip the power switch on the psu, then turn it back on, or unplug the reader from the usb header on the motherboard and plug it back in.
I've noticed other people have had similar issues...
Any ideas what causes this, or any ideas on how to fix this?
Bio Haz

Yes, I had the same hanging problems as well with older BIOS versions then 1.7.
But that isn't the problem I'm talking about, the computer always starts up, it's just a matter if the usb reader will work or not.
Maybe MSI has yet to make a BIOS that is compatible with all card readers.
BioHaz
Quote
Originally posted by me_AMD
...yes, I had USB card reader problems but it caused the computer to hang during POST, and that was fixed with BIOS v1.7...
...I've had what you describe happen on another machine with a Mitsumi card reader/floppy drive combo...not sure what caused it...had to disconnect it and then plug it back in...???...

[Athlon64] MSI K8T NEO-V : incompatibility with ATI RADEON 9800 PRO

Hi,
I read all the subjets on this forum about Radeon problems with MSI K8T NEO motherboard. Most of the peple can't use their graphic card in all situations.
My PC is :
-MSI K8T NEO-V
-AMD-64 3200
-Power : 400W
-ATI RADEON 9800 PRO
-1 Go DDRAM (2x512 in single channel)
-Hercules Digifires 7.1
I bought a new MSI K8T NEO-V with AMD 64.
The problem is that I can't use the computer in the games with AGP 8X even if I try to enable-disable all the options possibles in BIOS and Windows (fast write ...) : The computer freeze (screen disapear as if there was no video signal), reboot or return to Windows disabling the accelerated mode.
But in AGP 4X, all the game run without problem with all setups of BIOS !!!
I tried all the drivers (the new and the old drivers). Even if all are updated, it freeze.
There are no BIOS update for my motherboard. I saw that some people had BIOS update for compatibility with some Radeon cards ...
So, I don't know how to repair the problem because AGP 8X is AGP 8X and not 4X, and my Radeon run fine on other computer, and nothing say that Radeon 9800 pro don't run on this motherboard.
Does someone have the solution to make it work ? Does a new BIOS or driver update exist somewhere for Radeon cards ?

What Bas said about 30+ amps on the 12v rail does have merit. Even if you don't use it now there may come a time when you want to upgrade the system and certainly you won't want to buy yet another PSU then. A High end vid card now takes almost as much as the CPU to operate. Now days the 12v rail is the most important. Past systems regulated everything off the 5v railk and 12v was used mostly for powering drive motors. Now though the MB's use the 12v line to regulate all the voltages for the CPU, Chipset and other features as does the Vid cards. 3.3 volt lines are used for memory so we hardly use any 5v nowdays.
You have an older viod card and that does not eat much 12v but if you upgrade the most likely peice will be the vid card. You could go through this whole thing all over again if you are not careful to plan for that now with a new PSU purchase.
If the computer shop gives you a bunch of bull about power needs havbe them stop by the forum and we can help set them straight on this. There is more than enough data from MSI and historical data here that suggests that 16a on the 12v rail is certainly not enough. Hey I am not trying to sell you anything. I am just trying to help you get it right. The computer shop is the one trying to sell you something we just feel they are selling the wrong junk.

MSI K8T Neo 2 FISR Memory problems....

Could someone please help me
I have a MSI K8T Neo 2 mobo, with 500w powersupply, AMD 64 3500+, and 4 sticks of 512mb PC3200 ram (not all installed).
2 of my sticks were bought from PC world as PC3200 DDR400 ram.
The other 2 are Nanya 512mb PC3200 DDR400 ram.
I ONLY NEED TO USE 2 OF THESE STICKS.
This motherboard was chosen so that i could run DUAL channel.
However when running memory in slots 1 and 3 as manual suggests, the pc crashes when playing games. If i run 1 stick in slot 1 it happily runs all day long.
I have tried running memory in slots 1 and 2 but only making a frequency of 157.1mhz. See screenshot of CPU-Z:
MY MEMORY CONFIG
Surely this should be 200Mhz?
Basically i can only make 200mhz using a single stick and no joy with dual channel.

Don't know if this will help
You probably already know about this......

Problems with OC in MSI K8T Neo FIS2R!!!

Hi!
I have faced problems when making OC in my Athlon 64 3400+. I do not obtain to increase the FSB for 213Mhz more than without that they occur stopped or reset. I am using 1Gb (2x512) of Ram (Corsair CMX 3200LL PRO).
In the internet many stories exist that chip VIA K8T800 is not good for OC, because the AGP/PCI cannot be stopped with fixed values.
Exists some form to obtain with stability in this Mobo one overclock descent, with FSB of at least 220Mhz? The lack of stability in overclock limits the processor very, what it finishes in forcing to who knows to abandon the K8T Neo, passing to a Mobo that uses Nforce3 250, for example.
If somebody will be able to help with tips to try one overclock for FSB in 220mhz with stability would be very grateful, friends!
my system
Athlon 64 3400+ (cooler venus 12)
MSI K8T Neo FIS2R
1Gb Ram (512x2) Corsair CMX 3200LL PRO
ATI Radeon 9800XT 256Mb
120Gb SATA Maxtor 8mb buffer
Audigy 2
420W Thermaltalke
Case Lanfire Thermaltalke
Monitor LG Flatron 17 700P
CD/RW+DVD
LAN (adsl 400k) + Fax Moden (56k)

Take your sata drive off and you can overclock higher. There is no PCI/AGP lock so the speeds are affecting your sata drive. 210 mhz. system clock is about the limit before the sata drives start to act up.
The problem is with that particular VIA chipset. No way around it has been found to work in a practical manner.

MSI K8T NEO FSR with AMD 64 3200 - Can´t install WIN XP

Hi.
I´m writing you because i have a problem with an MSI K8t-Neo FSR.
The description of my PC:
MSI K8t-Neo FSR
AMD 64bits 3200 (640 cache)
HD 160 SATA Seagate Barracuda
1gb DDR 400mhz
Floppy 3 1/2
CDRW 52x32x52 LG
Video ATI RADEON 9600 XT
The problem is the following:
When I try to install Windows XP, when I press F8 to accept the Terms, it shows me an error message (IO 104 i think) and it hangs up or reboot.
I tried with another two Proccessors and motherboards (same model obviously) but it didn´t work.
Could it be a defectuous production serie of that model????
Or what do you think the problem is????
Thank you very much for your help.
I´ll be waiting for your answer!
Lucas Revale
PF: I´ve already tried updating the BIOS.

Thank you all for trying to help me!!!
I've already tried using only te necesary drivers.
I´ve also tried another VGA, another HD, another CDRW, another power supply, and an AMD 64 2800+.
It seems to be that the three motherboards i tried were defectous.
Does anyone has any other idea?!?!?
I´d really aprecciate your help!

Msi k8t neo fis2r wont post plz help

I recently updated my bios for the motherboard, and now I can't get the pc to post. Before I had the pc going but it kept getting gpfs and crashing to the desktop from games..
I was having problems with it not wanting to post before but I raised the voltage to my ram and fixed that, the problem is that when the bios got wiped from the upgrade it lowered the voltage on the ram..now i just cant get it to post at all..if anyone has any suggestions on how to get this powered up so i can change the voltage again please let me know
I am only using one ram chip...
my specs are
athlon 64 3000+
512mb mushkin special
sapphire radeon 9800 pro
msi k8t neo fis2r mboard
antec 430 watt 12v - 20a
i cant afford a new psu and i know this one is ok as my friend tested it in his identical system for 24 hours ..
my mboard just seems to refuse to post ..i upgraded my bios and the voltage dropped because the update sets the defaults back to default..
after i upgraded the bios, it posted once, i was in the bios and i saved some settings and restarted..i was going to go back and up the voltage on the ram again so that it would post (i had solved my problem similar to this earlier by upping the ram voltage to 2.75) but it was too late and after it shutdown it wouldnt turn back on
also, ive tried all 3 ram slots with the chip, and ive cleared the cmos with the jumper 3 times..

your complete specs may help .. if running two sticks of ram you could remove one stick ... you could also reset the bios using the clear CMOS jumper .. but without more detailed specs ppl will struggle to help you

MSI K8T Neo - does it support ddr2 modules?

MSI K8T Neo - does it support ddr2 modules?

Quote from: Zoolisha on 03-July-07, 06:05:07
tnx :(
its a CPU problem not a mobo. don't be disappointed from the board. if the CPU can work with DDR2 the board will have those DIMM slots.
i mean if you got board with DDR2 memory support and also have DDR2 memory sticks, you have to change CPU as well.

How to install a fresh copy of windows xp with sp2 on a msi k8t neo

My specifications:
CPU: AMD ATHLON 64 - 3000MHZ
MOTHERBOARD: MSI K8T NEO
RAM: CRUCIAL MICRON 1024MB DDR
HDD: WD 120GB ( C: 60GB, D: 60GB )
HDD: SEAGATE 4GB ( E: 4GB )
DVD: NEC 3520
CD: SONY
The system is on drive C:
primary master HDD 4GB ( on drive E: )
primary slave NONE
secondary master CDR DVD-RW
secondary slave CDR SONY
and last HDD 120GB on primary raid ( on drive C: and D: )
NONE on secondary
I have 2 floppy disks: on the first one it says G72-PRSA060, Promise 376/378 Driver, Disk 1 of 1
on the second one it says G72-VASA040, VIA SATA RAID Driver, For VT6420/VT8237, Disk 1 of 1
Can please someone tell me how to install a fresh copy of windows xp on my computer from scratch? All I know that I have to press F6 at some time and insert one of the disks but I don't know which one. And I don't know when to insert a second disk.
Thanks for helping me

Yeah. I remember when I had that board. I found the best SATA ports were the Promise ones, but...
What do you think, Tiresmoke? You had the same board too if I'm not mistaken.

MSI K8T NEO FIS2R No VGA help plz!

Hi, ive just purchased a new athlon 3000 64 cpu retail and an msi k8t neo fis2r motherboard, the specs and problem are below but plz bare in mind i am a system builder for the last 3 years i have tried alot of things to solve this.
MSI K8T NEO FIS2R MOBO
AMD 3000 64 RETAIL CPU
AMD RETAIL HSF
1024MB DDR333 SAMSUNG RAM
120 GIG WD HD
GALAXY GLACIER GEFORCE 6800 GT 256MB
PIONEER 106 DVD WRITER
400 WATT PSU (TSUNAMI I THINK)
Anyway the problem is this when i put the system together and turned it on i dont get any vga the monitor just says NO SIGNAL and when i look at the graphics card the fan on it isnt spinning.
Yet i have my old setup which is as follows,
ASUS A7N8X DELUXE MOBO
AMD 3200XP BARTON
AMD HSF
1024MB DDR333 AMSUNG
120 GIG WD HD
GALAXY GLACIER GEFORCE 6800 GT 256MB
PIONEER 106 DVD WRITER
400 WATT PSU
Basically the same as above i just changed the cou and mobo now when the graphics card is in that system it works fine no problems as soon as i try it in the new a64 system it doesnt work the fan doesnt spin and nothing comes on screen, ive tried everything i know ive double and trebble checked connections and ive tried removing components and then trying it, no matter what the graphics wont work.
I figured the motherbaord must be faulty and am going to contact the place i got it from but it would be good if anyone here knows how to solve it if it isnt the motherboards fault.
thanks very much.
ic3man1999.

Thanks guys, huess what like an idiot i forgot to put the 4 pin 12v in :( doh
Anyway it works fine now, but i have high temps core centre says 56 degrees right now while im typing this ? is this accurate or am i in trouble ?
Oh yeah and everytime i load windows it says new hardware found ide channel then secondary ide channel then it says a problem occured during your new hardware installation and it calls the hardware HDC it says this twice aswell.
ANy help guys ?
thanks

MSI K8T Neo-FIS2R - help please :(

When i first got this board + my Athlon 64bit 3200+ I just left everything in bios at default, and counter-strike bullet registration was amazing, the FSB clock said 133, (no i did not imagine this as ive had two of these boards and they both said 133fsb when i went to bios).... one day my p.c wouldnt boot up, i did a series of tests and couldnt find what was wrong, i eventaully reset cmos and still it would not boot up properly. So i got a new harddrive and that seemed to solve the problem, only this time when i went to bios instead of the FSB saying 100-280, it said 190-280, now counter-strike bullet reg has totally gone and plays like , oh sure good frames per second but it doesnt feel instant, i want 133fsb back quite desperately, i was hoping one of you kind people could tell me if theres fsb jumpers on my board or how i can get 133fsb back, wont let me below 190 at the moment :(
Thanks

below are my specs,similar to yours. the issue is in the audigy card .. remove it , try a different card ( live ) if some one can resolve this please let me know too..
I have a problem ,when ever I boot my system hangs ( at sound card) ,if I power down and reboot a few seconds later its fine.if I leave it running its fine,only on a cold start. if I remove my audigy card this problem goes away, I can use other cards ,but not the audigy, did you ever have this issue ,or know any one who has had an irq issue like this( I think its in the irq) ...............
My system- Athlon 64 3400+ bios 1.4| MSI K8T NEO-FIS2R | Kingston HyperX 1GB(pc3200)@2-2-2-5 | Nvidia g3 ti500 | Maxtor 160gb SATA 160gb | Creative Audigy | Plextor 52x24x52x CDRW | | Windows XP Pro Retail | Thermaltake 3000A Case & 480w PS | NEC FE1250+ Monitor

MSI K8T Neo D-Bracket Early Initialization

Hi,
I recently put togther my computer
-msi k8t neo fisr
-athlon 64 3200
-thermaltake xaser II case
-hardcano II
-thermaltake xaser III 480w power supply
-thermaltake silent boost k8 fan and heatsink
-2x 512 corsair xms 3200 v1.1 cl2
-samsung 16x dvd rom
-ati radeon 9700 pro /w zalman heatsink
Im kinda newbie at making computers(only my second time making a comp)
For some reason my computer hangs at early chipset initialization nothing shows up on screen, when i take out everything my computer beeps 3 times in intervals and still hangs on early initiliaztion.When i just put my memory in, the beeps stop but comp still hangs at early intialization.Anyone got any ideas?Could it be i installed my cpu wrong? bad video card?Or could it be i put in the pins wrong? Well thnx for looking and i appreciate any help.
Thnx

We have seen this happen alot in the P4 Forum, As There seems to be numerous Members that are having some compatability issues with the ATI-9700, Pro, and Non Pro VPU's . Someone Contacted ATI Tech. Support Directely and recieved this Response >> Dated Dec 24, 2003 at 01:10 PM reply
Hi David,
This video card has a know problem with the some of the MSI manufactured motherboards. It seems that the Boards involved are the VIA series, and the INTEL i865PE series. The only ATI cards that work have to have a serial # with -30 at the end or higher or they will not work. Because this card is discontinued our supplier cannot gaurantee a -30 card as a replacement. We can only exchange for a different item within the first 15 days so the only thing I can suggest is to see if you have a friend that may want to buy the card as there is probably nothing wrong with it and then buy another one. Any of the new 9600 or 9800 series don't have this problem. If you have any other questions let me know. Thanks alot.
Ryan S. Senior Tech. ATI Canada
I hope that this is Not the case with your Board. And now we have also seen that this compatability issue is NOT Just limited to the i865PE's as I have seen Threads involving both the SIS 655 and the INTEL i875P MSI Boards also.
I have also recieved word that some of the Rev.1-A 9700 Boards were also only 4 Layer PCB's, Not the Normal 5 Layer, and this is Leading to the Graphic Cards NOT Making Good Contact in the AGP Slot. And I have Read that this can be somewhat remedied by trying to (Gently) Making sure that the Card is inserted Completely into the Slot, also try (Again very gently) wiggling the Card back, and forth, to help establish better contact with the cards Gold Fingers, and the slot itself........I dont know, check and see if your Card is one of the -30 Cards, or look in SANDRA, and Under "Information Module", select "PCI, AGP, Card Reader" and Check AGP, and see what the Rev. is for your Card if it has the (A_1) then it may be a Thin one , I know; sounds rediculous, does'nt it? Sorry I could not Be of Any more assistance........Let us know.........SEAN REILLY875

MSI K8T Neo-V Not Seeing SATA HD

i just completed building a new system:
MSI K8T Neo-V motherboard
amd 3200
160 SATA HD
im trying to setup to use just the one hard drive but bios will not recognize it. it does see the dvdrw but not the hard drive. i made sure the sata cable and power were plugged in. i even tried installing xp then f6 to load the raid driver but still no luck. please any help would be greatly appreciated.

hey thanks for your reply. yes i made sure everything was enabled and i just fixed my own problem. just for the heck on it i called msi tech support [talked to a real smart fella] and he told me that sometimes you need to jumper the drive when your using a single hard drive. i played with it a few minutes and it worked. its installing xp right now. i guess you learn something new everyday.

Msi k8t neo fis2r problems part 3

sometimes when the computer is turned on it just turns the fans and leds on but doesnt boot up...
most of the time it loads up and i boot to the windows xp cd and i install the drivers for sata and then when it reaches the point of copying the files it will give me a bsod and say that there is a problem with the irql driver and then force me to shut the pc down..
sometimes it makes it past that and will begin to copy files onto the hard drive, like somehow the data is becoming corrupted..however it will start to say that the files cant copy randomly and it will allow me to retry..they will copy the 2nd time usually..i can keep hitting retry and it will usually go by..it gets to 30 something % and then crashes to bsod just giving me some random error..for some reason the files keep screwing up that go on the sata drive....I just replaced the old power supply that wasnt working with an antec true watt 430 watt power supply, so i know it isnt that..
i just cant figure out what the heck is going on..any help would be appreciated.my specs are
"IRQ NOT EQUAL OR LESS"
athlon 64 3000+ cpu
msi k8t neo fis2r motherboard
mushkin special cas 2.0 2-2-2-5 512 mb pc 3200
western digital 8mb cache 80 gb sata hard drive
sapphire radeon 9800 pro 128 mb 8x agp

fyi look an your cd sticker ity will show power, consumption, but they are way lower than you would think, hard drives,can be only 10 watts, less then some case lights , and fans, cd are similar.. your video, is the biggy somewhere between 90~150 watts..yikes .next to the cpu..and the mobo can use 50 or so (not sure about new mobos) not to mention the ram 1024 is @40 watts or so., dont forget about 25watts per pci card, not counting the sound card which can be double....
ergo the need for a big psu..
the combined total ratting on a psu is not the max number that the psu is rated, that is surge value.. so a 500 may only hold 400 sustained , and that will drop as the machine heats up, so in the end your 500 may onlyy pull 366 @50'c...

HELP!!! usb2.0 support with MSI K8T NEO

Similar Messages

Maybe you are looking for