Help, using Mic with runtime to record on flash

So ya I posted something earlier and I made it to open, what
I meant was I need help recording on flsh with the runtime, with my
mic, sorry for the confusion

Hi Chris,
It seems that the Fusion is one of those that can be OS 10.4.9 (USB Video Classs) compliant or not depending on serial number.
See here http://en.wikipedia.org/wiki/Listof_USB_video_classdevices
Now this would mean that it may work if the iChatUSBCam utility is disabled.
This also means deleting com.apple.ichat.plist as this stores the Camera/Utility info.
The same is true of the ioxperts drivers
5:10 PM Wednesday; May 30, 2007

Similar Messages

Can I use Solaris with my Home Recording Studio?

Hello,
I am currently building a basic home recording studio. I recently assembled a new computer and will be purchasing music recording equipment very soon. Before I purchase the audio recording gear, I was curious about a few things pertaining to the use of Solaris as my possible choice system.
The data that I store on my hard drives will need to be secure. I had originally considered RAID 5 though recently found out about RAID Z, which appears to be far ahead of the other RAIDs. I am curious to know more about how to set up a RAID Z system.
The computer will be running Solaris, various Linux or BSD, and Windows Vista. I have 500GB x4 hard drives. I am considering separating one and using it strictly for Vista, and using the remaining 3 with a RAID set-up for nix. If I had a choice, I would put much less hard drive space into Vista (capping it at 150 to 200 GB), though I have yet to come across a RAID system that effectively or efficiently cooperates cross-platform. With that in mind, the majority of the remaining 1.5TB can go into my studio OS - hopefully Solaris - while left-over hard drive space is set aside for various other *nix.
I've used Solaris 10 before, though haven't really gone into detail on the mechanics of such features as ZFS, zones, now RAID Z, and the many more amazing features that Solaris provides. Likewise, I am not really familiar with how well the system might operate with software/applications that I could use for recording and composing music.
Beyond the available 2TB (or 1.5TB RAID-ready) space, my computer is running on a new 64-bit quad-core AMD CPU (~2.6GHz) and currently has 4GB 1066MHz RAM. In my search for preparing a computer that suits me for high performance recording - including the editing and mastering of audio - I am attempting to narrow down my options on the software side of things. I have been very satisfied with the general file management of Solaris, though am unsure of how well it might run as the software side of a home recording studio. An additional factor in deciding will be the software's compatbility with audio PCI cards and external recording/audio interfaces. There is always a question of whether or not the necessary drivers, firmware, or similar is available between any given hardware and software components.
Some other *nix options I have considered - "Ubuntu Studio 64-bit" (though it appears to prefer 32-bit) and "64 Studio" (also Debian-based, though appears to be optimized for 64-bit). Some colleagues have used Gentoo with studio applications, though I don't know of any Linux distributions that offer the versatility, power, stability, and efficiency of Solaris for the operating system that it is.
If I use something like "64 Studio", I will have the advantage of a system that is ready-built for studio recording purposes as well as a system that I know is compatible with the sound gear that I am considering purchasing. However, those systems are restricted by their file system types, RAID availability and dependability, and the general disadvantages of using the Linux kernel in general. (I enjoy Linux, though I admittedly prefer Unix over it.)
Can I use Solaris with my home recording studio?
Thank you!
Edited by: the_professor on Nov 9, 2008 6:26 PM
Corrected a typo.
Edited by: the_professor on Nov 9, 2008 6:30 PM
Caught another typo.

I'm not sure what your question is. If you have particular software you want to run, you should see what you can get that package to run under. Sound hw stuff don't tend to be too portable unless it's written on top of OSS (htttp://www.opensound.com). Were I you, I'd consider separating out the storage part and the processing part. Get something like a cheap dell sc440 to be a file server and give the drives to that (unless you actually can get all the components working under solaris).
-r

Need help using LR with a 2nd Computer/Laptop

I just installed LR on to my laptop last night. I currently have all my photos saved to my desktop in e:\photos. I belived the sidecars are in that same folder, and the other stuff is in the default c:\docandsettings (or whatever it is).
The laptop is on a wireless network and my desktop's e: drive is accessible.
So last night I wanted to try lightroom on the laptop with the files I have on my desktop. Am I correct in that what I need to do is import files from current location so that I'll only have one version of the photos? If I make changes on the laptop, will the sidecar be changed so I'll see the change when I use the desktop? Or is there a different/better way to do this?
The other thing I want to do is be able to teather my camera (Canon 30D) to the laptop and shoot that way. I was able to do it using Canon's DPP and EOS Utilities software where the photo is writen directly to the hard drive. But when I plug my camera in, Lightroom opens as well. Is there a way to shoot directly into Lightroom? Or shoot to the card so LR opens the file from the camera without having to do a separate import?

Yes it will delete everything.
I'm a little confused at what you are asking at the end.
Does this help at all...
Using iPod With Multiple Computers
Or do you want to move everything to the new computer?
Use Your iPod To Move Songs To A New Computer
How to copy music between authorized computers
btabz

Help using -replace with wildcard characters, specifically braces

Hello all,
Needing help in using -replace with literal wildcard characters, specifically the braces characters. From reading old posts online this seems to have been a notorious shortcoming of PowerShell, but not sure if it's been resolved or not. My simple
code tries to remove the braces as follows (would like to keep the foreach loop and everything as is if possible):
$string = "test[]"
$braces = @("``[","``]")
Foreach($brace in $braces){
If($string -like "*$brace*"){
$string = $string -replace ($brace,"")
write-host $string
This code gives an error at the -replace line, saying "The regular expression pattern `] is not valid." I'm not sure how to pass the literal brace characters to the -replace parameter? Can this be done?

-like is a wildcard operator (it recognized wildcard patterns like * ,? and [a-z].
For a regular expression you use the -match operator.
Wildcard patterns and regular expressions are not interchangeable.
See:
get-help about_wildcards
get-help about_regular_expressions
for an explanation and examples of each one, and
get-help about_comparison_operators
for examples of using -like and -match.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Help using AEWsetunsol() with PowerBuilder 7 on Nt4

I am trying to use AEWsetunsol() with Powerbuilder 7 on WinNT 4 (sp6a) or Win2000.
Can anyone help with regards to what we have to do in PB to get this to work?
Please be explicit.
Thanks in advance.
..Lyall

Got it working but had to write a tpinit() wrapper in a DLL in order to get it
to work.
The wrapper function allocated the TPINIT buffer and populated the structure with
appropriate usernames/passwords (none in my case) but we set the 'flags' field
to 1 (notify by signal). [Powerbuilder does not handle structures terribly well
I am led to understand]
If we did not do this, the AEWsetunsol() did not work.
The code window open is as follows :-
// pb_SetLoginInfo() is custom written DLL function - simply
// allocates the TPINIT buffer and populates it.
// fields in same order as TPINIT buffer
If (pb_SetLoginInfo("", "", "", "", 1, 0, "") < 0) Then //flag set to 1 - TPU_SIG
indicating unsolicited notification selected by signals
     messagebox("Error", "Fail pb_SetLoginInfo()")
     return
End If
// pb_tpinit() is custom written DLL function - simply calls tpinit() with the
structure populated by pb_SetLoginInfo()
IF ( pb_tpinit() < 0) Then //call tp_init from user defined external dll
     messagebox("Error", "Fail tpinit()")
     tpterm()
     return
End If
We wanted to be notified by PBM_CUSTOM68 (Powerbuilder custom event 68)
Then, we called the AEWsetunsol as follows :-
//start subscribing to event
il_windowHandle = Handle(THIS)
//set event to trigger when receive unsolicited message
IF (AEWsetunsol(il_windowHandle, (1023+68)) < 0) Then //the (1023+68) indicates
the event id for pbm_custom68
     messagebox("Error", "Fail AEWsetunsol()")
     tpterm()
     return
End If
We then setup a custom pb event to receive these events, subscribed to an event
and off we went.
Now, if we could only convince the Tuxedo 8 WS DLL to work with Powerbuilder (rather
than crashing on APP exit)
Hope this helps someone.
..Lyall

Recording using mic with musical accompaniment and no latency

I am using GarageBand '08 to try and record a podcast. I have created music, and am trying to talk over it and hear it all through headphones. Unfortunately, there is an unacceptable level of latency in the headphone jack this way (my mic is plugged into the mic/line in, my headphones are plugged into the line out). I have tried all the optimization settings to no avail. I have turned off "echo" and "reverb" in the live instrument settings. Where else do I turn? What do I do?

Yes, GB does have latency, and sometimes it's impossible to get rid of it. I usually record without monitoring and cover only one ear with the headphones, so I can hear myself but also the other tracks.

HELP : using UPPER with LIKE in CMP finder??

Hi,
am trying to do a case insensitive wildcard search but am having little luck, if I run the sql query
select * from my_view where UPPER(name) like '%SMI%'; then I get the right results back but when i try to use it in my CMP bean I get nothing unless the case matches.
my xml entry is as below:
<finder-method partial="False" query="SELECT * FROM MY_VIEW WHERE UPPER(name) LIKE ?1">
<method>
<ejb-name>View</ejb-name>
<method-name>findByName</method-name>
<method-params>
<method-param>java.lang.String</method-param>
</method-params>
</method>
</finder-method>
can anyone help please ?? can I not use UPPER in one of these queries ??
Regards
Rosie

Rosie,
I was able to get this example to work and it is nearly identical to yours. I passed "C%" into the bean and received all the records where the USR_MSG_CTGR_ID field started with "C". Is the problem a data issue? (Does the connection used by the bean use the same database and user ID that you used when you executed the query manually? If not, are they looking at the same table?)
Good luck!
<finder-method partial="False" query="select * from my_usr_msg where upper(usr_msg_ctgr_id) like ?1">
<method>
<ejb-name>My_usr_msg</ejb-name>
<method-name>findByUpperValue</method-name>
<method-params>
<method-param>java.lang.String</method-param>
</method-params>
</method>
</finder-method>

Using property with geocode in record filters/range filters

Hi All
We have created a property called "Location" with data type as "Geocode" and we are able to use the same in sorting.And ,this will generate two dynamic properties by name "Kilometers_to_Location and "Miles_to_location".Is there a way to use these dynamic properties in our record filters or range filters?We have requirement to filter products based on say within 100 kms, 1000kms from the user's location and not just sort based on this.
Any suggestions/help is appreciated.
Regards
Shreyas

Hi Shreyas,
Does this help:
http://docs.oracle.com/cd/E37502_01/server.751/es_dev/toc.htm#Geocode%20filters
Quoting from the link above:
Geocode filters
When used with a standard attribute of type geocode, the EQL DISTANCE function indicates a filter based on the distance of that geocode attribute from a given reference point.
The DISTANCE function returns the distance (in kilometers) between two geocodes. The syntax for DISTANCE is:
DISTANCE(geoAttribute, TO_GEOCODE(latitude,longtitude))
where
geoAttribute
is a standard attribute of type geocode. The
TO_GEOCODE
function creates a geocode from a given latitude and longitude pair, both of which must be of type double:
The latitude of the location is specified in whole and fractional degrees (positive values indicate north latitude, and negative values indicate south latitude).
The longitude of the location in whole and fractional degrees (positive values indicate east longitude, and negative values indicate west longitude).
Note that distance limits in geocode filters are always expressed in kilometers. The records are filtered by the distance from the geocode reference point to the latitude/longitude pair.
Julia

Help using mic on Quickcam Fusion

Hello All,
I'm trying to figure out if there's any way I can get the microphone to work on a Logitech Quickcam Fusion. I'm successfully using the camera with iChat by way of iChatUSB and an IOXperts beta driver. The IOXperts driver does allow me to access most of the settings and adjustments on the camera but iChat just doesn't recognize that the camera has a mic. I tried to get help from the guy at IOXperts, but he has a bit of an attitude problem when answering questions (or ignoring them as is most usually the case). In one message he stated that the camera declares itself as 'audio class compliant'. But what that means to me and how I'm supposed to get it to be recognized is a mystery.
If anyone has any suggestions, I would greatly appreciate it. And, yes, I'm aware that OS 10.4.9 adds USB camera functionality, but this version of the Fusion is not one that it supports, unfortunately.
Thanks,
Chris

Hi Chris,
It seems that the Fusion is one of those that can be OS 10.4.9 (USB Video Classs) compliant or not depending on serial number.
See here http://en.wikipedia.org/wiki/Listof_USB_video_classdevices
Now this would mean that it may work if the iChatUSBCam utility is disabled.
This also means deleting com.apple.ichat.plist as this stores the Camera/Utility info.
The same is true of the ioxperts drivers
5:10 PM Wednesday; May 30, 2007

How to use Mic with RCA Connectors?

I use iTunes and Nicecast to do an Internet radio show. I have tried using a usb headset with an attached mic. However, the sound is rather tinny compared to my old headset that I used on my PC. Are there any connectors I could buy where I could use my old rca headset and have a usb plug for my iMac? Even if there is such a connector, will it work, or sound any different? Just wish I could plug in the headset and mic directly into the Mac. Would appreciate any suggestions.
Thanks

Not without getting an adaptor such as the iMic. iMic Support | Griffin Technology.

Help using FlexUnit with Nant

Hi,
I created some tests which run perfectly if I use my IDE (FlashDevelop) to run them. I've been trying to create a Nant script to automate my tests and have the results written into an xml file. The entire build system where I work uses Nant instead of Ant, so I can't really follow the Ant examples.
I am able to compile my main and my test classes into a swf like this:
    <target name="compile" depends="cleanup">
        
        <exec program="mxmlc.exe" workingdir="." verbose="true">
            <arg value="-compiler.strict" />
            <arg value="-compiler.source-path" />
            <arg value="..\engineunittests\src" />
            <arg value="-static-link-runtime-shared-libraries" />
            <arg value="-output" />
            <arg value="${executable.dir}\EngineUnitTests.swf" />
            <arg value="-compiler.include-libraries" />
            <arg value="${flexunit.dir}\flexunit-4.1.0-8-as3_4.1.0.16076.swc" />
            <arg value="${flexunit.dir}\flexunit-uilistener-4.1.0-8-4.1.0.16076.swc" />
            <arg value="--" />
            <arg value="${source.dir}\com\playbrains\metagame\test\Main.as" />
        </exec>
    </target>
That works fine, then I try to run it like this:
    <target name="runtest" depends="setup">
        <mkdir dir="${output.dir}" />
        <exec program="adl.exe" workingdir="${executable.dir}" verbose="true">
            <arg value="application.xml" />
            <arg value="--" />
            <arg value="${output.dir}" />
        </exec>
    </target>
This runs the swf and the tests but the problem is that it opens the air debug window and it never closes, and the results are never written on any xml file.
How can I configure my swf so that it stops the adl window when it is done and also write down the results on an xml file?
Thanks,
Franco

Since you are using AIR. If you wanted to, the other thing you could do is copy the AIRCIListener, and instead of having it send over the file system, you could use the AIR File API to write it directly to disk.
These tools were developed to work with Flash Player or AIR and Flash Player does not have that ability.
Take a look at:
https://github.com/flexunit/flexunit/blob/master/FlexUnit4AirCIListener/src/org/flexunit/l isteners/AirCIListener.as
and
https://github.com/flexunit/flexunit/blob/master/FlexUnit4CIListener/src/org/flexunit/list eners/CIListener.as
Mike

Help using countifs with pop-up menus please

made a spreadsheet and am using pop-up menus as the cell format to list several shifts when making a schedule for my job, so far so good.
now i would like to total across the rows for each type of shift in 3 categories so for instance, i would like to create a formula that will tally the number of times i selected either the drop down for 9a-6p or 10a-7pm...i can get it to count one occurance by using =COUNTIF(B5:H5, "=9A-6P")...so i was trying something like =COUNTIFS(B5:H5,"=9A-6P",B5:H5,"=10A-7P") to get it to total the number of times i chose both of those text entires for the drop down, but that seems to be missing something...any help would be appreciated....

Hi Steph,
What you're missing is this (From the iWork Formulas and Functions User Guide):
COUNTIFS(test-values, condition, test-values..., condition...)
test-values: A collection containing values to be tested. test-values is a collection containing any type of value.
condition: An expression that results in a logical TRUE or FALSE. condition is an expression that can contain anything as long as the result from comparing condition to a value in test-values can be expressed as a Boolean value of TRUE or FALSE.
test-values...: Optionally include one or more additional collections containing values to be tested. Each test-values collection must be followed immediately with a condition expression. This pattern of test-values, condition can be repeated as many times as needed.
condition...: If an optional collection of test-values is included, an expression that results in a logical TRUE or FALSE. There must be one condition following each test-values collection; therefore, this function will always have an odd number of arguments.
Usage Notes
Each value in test-values is compared to the corresponding condition. If the
corresponding values in each collection meet the corresponding conditional tests,
the count is increased by 1.
The test-values, condition pairs may be thought of as a series of tests connected by AND(s)—the whole set is TRUE only if ALL parts are TRUE.
Your formula should be returning a zero count and you are testing the same set of values for two exclusive conditions—any pop-up set to "9A - 6P" cannot be also set to "10A - 7P"—at least one of the conditions will be false in every case.
For the results you want, you'll need a formula that counts each value/condition set separately, and adds the results:
=COUNTIF(B5:H5,"=9A-6P")+COUNTIF(B5:H5,"=10A-7P")
OR
=SUM(COUNTIF(B5:H5,"=9A-6P"),COUNTIF(B5:H5,"=10A-7P")
Regards,
Barry

Help: Using templates with Library items

Hey there dreamweaver users
Just a quick question it might sound dumb but im new to the dreamweaver world and would be greatful if you could answer this question i have.
I have made a template for my site and i wish to update all the child pages with a library item i have inserted into the main template,
ive put it into the main template as a footer navigation links and then left dreamweaver to update all my other child pages with this library item.
the thing is it never works am i doing something wrong ? really could do with some help.
Thank you :]

I only have one Template and this is it
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Caribe Travel Services</title>

<link href="../caribe_styles.css" rel="stylesheet" type="text/css" />
<link href="../print.css" rel="stylesheet" type="text/css" media="print" />


</head>
<body>
<div id="container">
<div id="header"><a href="../starter.html"><img src="../assets/images/logo.jpg" alt="Caribe Travel Services" name="logo" width="213" height="144" id="logo" /></a></div>
<div id="sidebar">
    <ul class="nav">
      <li><a href="../packages/air.htm">Air Packages</a></li>
      <li><a href="../packages/cruises.htm">Cruises</a></li>
      <li><a href="../packages/inclusive.htm">All Inclusive</a></li>
      <li><a href="../packages/resorts.htm">Resorts</a></li>
      <li><a href="../packages/index.htm">Contact Us</a></li>
    </ul>
    <div class="sideContent">
      <h3>Heading 3 here</h3>
      <p>side content here</p>
    </div>
</div>
<div id="mainContent">
    <h1>Heading 1 Here</h1>
    <p>main content here</p>
    <h2>Heading 2 </h2>
</div>
<div id="footer">
    <ul>
      <li><a href="../index.htm">Home</a></li>
      <li><a href="../packages/index.htm">Packages</a></li>
      <li><a href="../specials/index.htm"> Specials</a></li>
      <li><a href="../galleries/index.htm">Galleries</a></li>
      <li><a href="../testimonials/index.htm">Maps</a></li>
      <li><a href="../testimonials/index.htm">Testimonials</a></li>
      <li><a href="../newsletter/index.htm">Newsletter</a></li>
      <li><a href="../contact.htm">Contact</a></li>
    </ul>
</div>


</div>
</body>
</html>

[HELP]Using AX with xbox

Sorry, another post on this argument but i did not find any answer to my trouble.
I have
1)router wifi netgear
2)imac'tel c2c
3)airport express
4)xbox
Well, is there any configuration that make me able to play with xbox live WITHOUT buying the wifi adapter for xbox 360?
I'm trying to connect my xbox360 to the ax and then to the home network wirelessly but i can't manage to do it. I supposte that's because the ax eth port is only wan but i'm not so sure. Is there any suggestion please?
Thanks a lot!

The Ethernet port on the AirPort Express (AX) is active only when the AX uses WDS to connect to a wireless network. Since Netgear doesn't support Apple's WDS, you can't use the AX's Ethernet port.

Need help Using iphone5 with Bluetooth in 2006 Volvo xc90. I have paired my phone and can make calls. I want to play music on my iPhone using the car's sounds system.

I have just purchased a 2006 Volvo with Bluetooth. I have paired my phone with the car to make phone calls. I don't have a way to play my iTunes music through the cars audio system. Is there a special auxiliary adapter that I need to buy?

Nobody have notice this problem or have a tip for that?

Help, using Mic with runtime to record on flash

Similar Messages

Maybe you are looking for