Help using one path to cut/trim another

I haven't done much work in Illustrator, and I'm currently using CS4.  I'm trying to figure out how to do something simple, and AI is so counter-intuitive that I'm about to rip my hair out.
This is all that I'm trying to do:
I have two lines intersecting, and a circle (just a path, not a filled shape) smaller than the length of the lines, and centered on where they meet.  I'm trying to use the circle to cut out the portion of the lines within the circle, so I'm left with what's outside the circle.
That's it, that's all I'm trying to do.  I've clicked every button on the Pathfinder palette, I've tried making a compound path, I've tried making a clipping mask, I've tried using the scissor and knife tools, etc...  There's no guarantee I did these things correctly, but as I said, Illustrator is so counter-intuitive that for someone new to the application, they usually end up wanting to set the install discs on fire.
So, how can I use the circle to cut the lines?  I'd appreciate any help.

Wade,
You're the one who jumped in here and, unprovoked, lambasted me for my comment.
My post was succinct and makes a strong point: Such a simple operation as that described causes untold confusion for a new user. Somewhat experienced users make suggestions, each exposing ridiculous caveats which render the "solutions" insufficient. It's a case-in-point demonstration of the weakness of Illustrator's Pathfinder features--for what is such a common and straightforward function in other drawing programs.
I'm not interested in your incessant personal attacks and insults that have nothing to do with the actual subject of the thread. Go find someone else to follow around like an attention-starved puppy.
JET

Similar Messages

  • How to use one module pool program in another module pool programming?

    Hi
    I have one moodule pool program.
    In one of my screen i want to use some code which already developed in another module pool program.
    Is there any direct way for using one module pool programcode  in another module pool program.
    If there any approaches for this plz help me in this issue.

    Dear,
    If you want to use the code.
    first you can write your code in a subroutine in module pool program 1
    and then you can use it from module pool  program 2 by
    perform subroutine_name(program_name)
    using P_1
    changing C_1
    if you wan to use one module pool data into other module pool.
    so that is another requirement.

  • How to use one report column into the another report in obiee

    How to use one report column into the another report in obiee

    i dont want to use column as a filter for another report it should be report column for another report
    Thanks,
    Vivek

  • Need Help using One-Key to make a system back up to DVDs

    I bought U330 in Sept and now that I have some of my own programs installed and running, I want to make a backup to D (I think?) and also make backups to DVDs so I could make backups. 
    I'm no novice, but I cannot figure out the instructions for this. 
    When I pick  Backup, even at Max compression, it says I don't have enough space.   I don't have THAT much on D:---did I need to repartition this before I even started using this computer?  Does this mean I can never use One-Key? 
    When I pick Create Recover Disc (to make DVD backups), what do I do next? 
        The dropdown for "Select Source From" has only two options, I am guessing I have to pick "Select another image", but then I don't know what to pick for the Image path.    How do I pick the whole C drive ???   Or??   
    Please tell me exactly how to do this because I am finding LENOVO's instructions totally inadequate.     
    A couple times I got to the DVD burner--not sure how--but then it just wanted to burn the sample music files.    I'm feeling quite frustrated--this should not be this difficult!!

    I thought you've got error of another type - that error is fixed by simple software update.
    Regarding your case - it's always frightening in first time. Believe me - there's completely nothing to be afraid of.
    Resizing C drive may result killing your DATA on it only in case of energy is down during the process. Process is taking about 15-20 minutes on slow programs and about 3-4 minutes on fast programs. That means that even having problems with electricity you'll be able to finish everything correctly running on battery.
    I'd recommend using Acronis Disk director Suite, but it is not free. One of the best free progs for that are bootable Linux livecds PartedMagic and GParted. They're all intuitive understandable. 
    You will get your NOVO recovery feature lost after C resize, but you can enable it later, replacing that factory backup in hidden partition with your own backup - your NOVO button will restore your system with all your software and settings.
    it will be good for you to start with some basic principles on partitions organization schemes - why, what for and how questions are briefly explained here. After reading this you'll be able to ask right questions to get right answers.
    //help will save the world

  • How do you use one managed session bean from another?

    Hello -
    I am a complete newbie to JSF coming from Struts 1. My question is how do you use one managed bean from the method of another one? I think this would be a common senario. For example I put a bean in session scope when a user logs in and in a different method within a different bean I want to get some of this user's information. What is the correct way to retireve one bean from a method in another with session scope?
    Also what would the code look like to retieve another bean from the method of a managed bean where the bean you want to retrieve has application scope?
    Thank you in advance.

    Sinplicity wrote:
    Could you be a bit more specific? If a bean is configured in the faces config file then all of it's properties are managed, correct?Not necessarily.
    What would the code look like to retireve the bean?You don't retrieve it, it has been injected.
    Can I retrieve the whole bean or just a property of the bean. I would be really interested in seeing how this is done in code? And would really love a bit more information on what it means to be a managed property?Time to consult a JSF tutorial.

  • Using one counter with FiniteSamps and another with ContSamps

    I am trying to use 2 counters on the USB-6229 (or USB-6259), where one counter is set up for FiniteSamps and another for ContSamps. I have the following MeasurementStudio code:
    ErrChk DAQmxCreateCOPulseChanTicks(hCnt0, "Dev1/ctr0", "", "20MHzTimebase", DAQmx_Val_Low, 0, 400, 400);
    ErrChk DAQmxCfgImplicitTiming(hCnt0, DAQmx_Val_FiniteSamps, 100);
    ErrChk DAQmxStartTask(hCnt0);
    ErrChk DAQmxCreateCOPulseChanTicks(hCnt1, "Dev1/ctr1", "", "20MHzTimebase", DAQmx_Val_Low, 0, 400, 400);
    ErrChk DAQmxCfgImplicitTiming(hCnt1, DAQmx_Val_ContSamps, 2);
    ErrChk DAQmxStartTask(hCnt1);
    When I run it, I get a run-error 50103 "The specified resource is reserved". If I change the FiniteSamps to ContSamps on the first counter, everything works fine.
    If I use only one counter with FiniteSamps, everything also works fine.
    Is this a bug in DAQmx or the dual counter use on M-series devices is limited to ContSamps?
    Vic
    Solved!
    Go to Solution.

    Hi Vic,
    This is actually expected on an M Series device.  Here's a timing diagram from the M Series User Manual that might make this a bit more clear:
    The device actually uses one counter to gate the other so the result is a finite pulse generation.  If you can provide the gate from another source, you may configure a continuous pulse generation on both counters and gate them (DAQmx calls this a "Pause Trigger") from this external signal. 
    You might also want to look into using Correlated Digital I/O to generate multiple finite pulses (up to 32 lines on your 6229 and 6259).  You could use one of the counters to generate a timebase for the digital lines, and build the waveform accordingly.
    One thing to note is that our new X Series boards can generate a finite pulse generation on a "single" counter (there is actually a paired internal counter that allows for this).  There are four user-accessible counters on X Series devices, meaning you could generate four finite pulse trains.
    Best Regards,
    John
    John Passiak

  • Using objects with one fill to cut through another

    Sorry for the clunky-description in the subject line. Not sure how to search for a solution to this, though it's probably pretty simple.
    This is Illustrator CS3 on a Mac. Everything is on one layer. I used the white shapes as alterations to fine tune black objects beneath. I'd like to have them permanently intersect so I can be left with only the black shapes (for a single color screenprint). Is there a way to "collapse" the objects and instruct Illustrator to eliminate the white? I've tried everything in the Pathfinder palette without the results I'm after.
    Any suggestions?
    Thanks!
    Brad

    Hi Tman.
    Thanks for the reply.
    1. Yes, it'll be a 1-color silkscreen, ultimately.
    2. Yup, all vector.
    3. No, the gray background was simply there to show you guys the white objects I'd used to fine tune the black brushstrokes. It'll be deleted.
    I see what you're saying. Because the white areas disappear without the background, their existence is inconsequential - once it becomes a PDF, it's just black and white anyhow.
    I just didn't want to worry that *any* object was going to wind up on the screen, or that I had to blend the objects and erase the white ones.
    Thanks!
    Brad

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • How can I use one Add-on prior to another for specific MIME-types?

    I'm using Shockwave Flash plugin to watch some videos on YouTube, StreamCloud, etc. It also handles .mkv and .mp4 files/streams. After installing VLC Web plugin to handle MIME-types like mp3/4, mkv additionally and prior to the Flash plugin, Firefox keeps using Flash to handle those types insted. I cannot find options to set the desired priorities. Only disabling the Flash plugin solves my problem, but also keeps me from watching Flash contents, which Is not acceptable.
    Did I miss something or is this Firefox's fault?

    If you type or paste '''about:plugins''' in the address bar and press Enter, you can see which plugins are associated which various content types.
    I do not know how to prioritize one over the other for the same content type if the plugin settings (plugins often have an interface outside of Firefox to adjust their settings) do not allow that.
    As for MP4, I don't think Flash normally would be selected. I suspect the website is specifying a Flash media player and streaming the MP4 through that. If you want to hide the Flash plugin from a particular website, you can use the Permissions tab of the Page Info dialog.
    Click the padlock or globe icon in the address bar, then More Information, then Permissions. The top section of the Permissions panel should be "Activate Plugins". Here you can select Block for Flash for the current site. After reloading the page, does the media play using a different plugin?

  • How do i use one midi controller and ignore another in Mainstage 2.1?

    I am running Mainstage and Ableton Live in parallel and use two midi controllers. I would like the APC40 to just be recognized by Live, and my MPK49 to be recognized by Mainstage and Live. Right now, I get midi signal from Mainstage on both midi controllers and can't seem to figure out how to assign just Mainstage to just get midi input from the MPK49. Any ideas? Thanks.

    Yes, that worked a the device popups were set to all. Fixed that and moved on. Thanks! However another similar problem has come up...
    The sliders on the APC40 (which I just want to be recognized by Live), are affecting the Mainstage Channel Strips volume sliders. I can't seem to figure how to make Mainstage ignore this as all of the APC40 sliders are effecting Channel Strip 1. Thanks.

  • Application crashes on starting from one path but works from another path

    We have an odd problem.  A small application is deployed to a handful of users. The PB11.5 version has been running successfully for years on XP and then a year on Win7. It was recently migrated to PB12.5 and redeployed. It is a simple deployment - EXE, PBD and runtime DLLs all in the same folder. For one user, the application crashes before it has hardly started.  The Windows messsage "Application has stopped working" is displayed.  The further details shows it is event APPCRASH and module PBVM125.dll where the failure occurs.
    However, if the folder name it is deployed to is renamed - no other changes, just a rename - it works fine.  Rename the folder back to the original name and it fails again.
    Other than the zero change migration to PB12.5, the application has not changed for 4-5 years and much of it is over 10 years old. While the error handling could be improved, it has functioned perfectly OK in previous incarnations and this version runs properly elsewhere.
    Any ideas what might be causing this?
    The application is very basic in its design - it doesn't specifically reference the Registry (although the runtime dlls might). My suspicions are a corruption in the Registry or Prefetch or Folder Redirection.
    The user machines are supplied under a third party contract so we are limited in what we can see and do to investigate.

    Our infrastructure vendor has removed the problem by performing a profile reset on the affected user account.  The application now runs successfully in the intended location.
    Presumbably this action has cleared both the User registry and Windows user account settings.  I consider this to be a sledgehammer solution as the user has lost other setting too (eg. Outlook accounts).
    I suspect that this is all I will ever know of the cause.  If I learn anything more precise I will share it with you.
    By all means continue to offer your suggestions.  However, as the problem has been eradicated, no further investigation will be possible unless it recurs.
    Cheers,
    Ian

  • Using one MacBook to back up another

    I want to use two MacBooks to back up each other, by partitioning the hd´s and using Time Machine manually. Is this feasible? Will a USB link adapter do to connect the two?

    Sopop wrote:
    I want to use two MacBooks to back up each other, by partitioning the hd´s and using Time Machine manually. Is this feasible? Will a USB link adapter do to connect the two?
    Not a good idea, use a new external powered drive Disk Utility HFS+ Journaled formatted and Carbon Copy Cloner each boot drive to their own drives.
    Clones are hold option bootable, you can access the files on the drive from any Mac or PC (with MacDrive installed), reverse clone back onto your internal drive or a newer larger hard drive.
    TimeMachine is for newbies.

  • How to use one Web Dynpro DC into another Web Dynpro Dc

    Hi All,
    I am trying to learn the usage of DC but I am unable to find a basic tutorial on this topic. I found a few tutorial and few blogs too, but none of them explains topics like:
    How to call child component methods from parent component and vice versa too if possible?
    Can somebody please provide me with a basic tutorial on this topic.
    Regards
    Sid

    Hi,
    Go through the Componentization tutorials
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/bd0e0401-0801-0010-aaab-d0e1742da383 [original link is broken]
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/751d003a-0b01-0010-8996-afbaa3fd5339 [original link is broken]
    https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#comp
    Regards,Anilkumar

  • How to use one DC's view/component/appln in another DC

    Hi All,
      I am new to DC concept. I am trying to use one DC's component in another DC. I have done following steps.
    a)Created two DCs A and B
    b) DC A's 'New Public Part-->Entity Type(Web Dynnpro Component) I selected component
    c) Add Used DC in B, I added A's component
    <b> From this point onwards I am not getting any clues</b>. How do I call A's component in DC B. <i>Please guide. Any examples will be great.</i>
    Thanks and Regards,
    Ganga.

    Hi Gangadharaya,
    Just tell me do u want to display a view, use some context or use some methods defined in other controller.
    So that i can help you in the same direction.
    <b>Component Usage</b>
    Suppose you have following scenario:
    1) DC2 has component Comp2. In this dc you read the context a value and stores it in context named "Ctx_value".
    2) DC1 has component Comp1. Here you want to read the Ctx_value from comp2.
    In Comp2 create a method getValue()
      public java.lang.String getProcessId( )
          return wdContext.getCurrentElement().getAttributeValue("Ctx_value");
    In the interface controller of Comp2 click on properties tab and add reference to the cont2 controller. Now create a method here in interface controller to get the value of Ctx_value
      public java.lang.String getValue( )
        return wdThis.wdGetComp2Controller().getValue();
    Expose the Comp2 as public part now.
    In DC1 add DC1 as used DC.
    Build both dc's
    In Comp1 create Component usage by name Comp2Usage to Comp2.
    Now you can access the method getValue() from interface controller of Comp2.
    wdThis.wdGetComp2UsageInterface().getValue();
    This is how you can access a value of Context. Same can be done by direct binding.
    <b>View Access</b>
    If you want to access a view v2 in comp2 then goto windows in comp1 and embedd an existing view and in that select the interface view of comp2. The default view in comp2 can now be displayed in comp1.
    Regards,
    Murtuza
    Message was edited by:
            Murtuza Kharodawala

  • I need help using multiple internal drives

    I have 3 internal drives and 24GB of Ram on an early 2009 G5. I've recently upgraded one drive to yosemite but my current applications are on the other drive;  running 10.7.5.
    I didn't want to reinstall all the apps on the yosemite drive so I was wondering
    if there is any issue with using one drive for applications and another for work/storage.
    Keeping all my apps on drive running 10.7.5 while everything else is on the Yosemite drive.
    Is it advisable to do? Do the apps run any slower this way?
    Thanks for any help.
    M

    You could add a fourth drive, clone your 10.7.5 system to it, and upgrade the clone to Yosemite. That way you still have your clean Yosemite drive and your working 10.7.5 system in case of trouble with the upgrade.
    In the event that an app needs to be re-authorized when moved to a different drive, do you have a record of the relevant serial numbers?

Maybe you are looking for