Help using SXCI-1102 with 1122

I have tried the advice from previous postings, but none have worked for me. I am using a SCXI-1000 chassis with a 1102 and 1122 module. I had the 1102 linked to my DAQ device and the 1122 to none. With this my temp readings were good (on the 1102) but pressure readings would drift negatively. So I cabled the 1122 to the device and the readings are stable but incorrect and my temp readings are wrong. Any ideas?

Hello,
Thank you for contacting National Instruments.
You should have your DAQ board cabled to your SCXI-1102 as mentioned on page 10 of the SCXI Quick Start Guide.
The SCXI-1122 is a jumper programmed module. This means that you must set jumpers inside the module and then ensure that your software setting match the jumper settings (ie. gain and filter settings). The SCXI-1102 has software programmable gain settings and a fixed 2Hz filter.
I highly recommend that you read the SCXI-1122 User Manual. Then remove your SCXI-1122 from your chassis and open it up to make sure the internal
jumpers are set correctly. Then replace the module and make sure that the settings you have configured in software match your jumper settings.
Regards,
Bill B
Applications Engineer
National Instruments

Similar Messages

  • Help using file sharing with different users accounts on same Macbook

    Hi, I just wanted a little help using the file sharing option. My wife and I had different users accounts on the same MacBook, but when I am trying to share my baby's picture from my documents folder for my wife to have the same picture, I can't find the way to do that; I am not been able to find my pictures on my wife's account. Is there any way that I could share a folder from my account and my wife to have the same files at the same time on her account?
    I mean, something like the smart play list on the itunes?
    Thank you

    You can't do that directly unless you change permissions on your whole Documents folder which is not a good idea. Your wife can see your Documents folder from her account by going to Users/yourusername/Documents. However, this folder has no read privileges for others except yourself by default so she won't be able to open it.
    rather than changing permissions on your Documents folder, you can place the pictures you want to share in Public folder in your home directory or in Users/Shared folder.

  • Need help using 'visited' class with Colorbox

    Hi guys,
    I'm creating a site for a client that uses the Colorbox script for the store. When you click on a thumbnail of a product in the store, the browser uses Colorbox to display the external PHP page with the product information.
    This all works fine but what I would like to do is...
    When you click on a product thumbnail and it brings up the page (using Colorbox), when you close the Colorbox window and return to the thumbnails, I would like the padded background of the image to be a different color and not grey like the rest of them - so you can see which products you have looked at and which products you haven't.
    I've tried using...
    #productContainer img:visited {background-color:#0973ba;}
    ...but it didn't work.
    Click here for the link to the test site if that helps.
    Does anyone have any suggestions as to how I can achieve what I need to do?
    Thank you very much and I look forward to hearing from you.
    SM

    Did you try adding the pseudoclasses here?
    #content a {
        color: #0973BA; 
        text-decoration: none;

  • Need help using XWS-Security with EJB service endpoint

    I am trying to use XWS-Security along the lines of the JWSDP 1.6 examples, but with an EJB endpoint deployed in an ejb-jar file rather than a typical service endpoint deployed in a WAR.
    Any information on how to do this would be appreciated. I believe I'm close to getting an example working- the details on the problem I've encountered are below.
    I use WSCompile to generate stubs and ties for my WS, and XDoclet to generate the ejb-jar.xml. I deploy the ejb-jar on JBoss 4.0.2.
    The problem I'm having is that the security features are handled in the Stubs and Ties generated by WSCompile, and my server-side refuses to use the WSCompile generated Tie. Previously the web service had used the WSCompile argument 'import="true"', which generated no tie, and the web service worked (this was before I tried to add security features). Whatever mechanism had been used to direct messages to my EJB then is still being used now (JNDI, I believe, facilitated by the ejb-jar.xml and webservices.xml files), and bypassing the Tie class that I now generate using 'server="true"'.
    There must be some way I can reconfigure my webservice so that the WSCompile generated Tie is used, but I can't find any help on the topic.
    Can anyone tell me how to make sure my webservice will use the Tie class on the server side? Is it even possible when using EJBs instead of servlets?

    Burn your CD using iTunes. Then rip the music off of the CD using any "ripping" program. Just make sure the program you use has the "save as .wav" option available. Im not familiar with MusicMatch but I'm sure you would be able to use it.

  • Need help using photo shop with my tshirt design

    need help

    You need to give more information. What OS? What version of Photoshop? Etc.
    If you're using Photoshop CC, then you need to have the Reference Manual:  https://helpx.adobe.com/pdf/photoshop_reference.pdf
    This forum is not necessarily a beginner's training area. You can get started with Photoshop by watching tutorial videos, trying things yourself, and finding answers to specific questions in the Reference Manual (link above).
    Here are some beginner's tutorials:  https://helpx.adobe.com/photoshop/tutorials.html
    You can also Google more advanced Photoshop tutorials, or go to Adobe.com and search for tutorials.
    Good luck.  :+)

  • Help using FileMakerPro 12 with OS 10.6 and file sharing

    This topic is posted here because it deals mostly with file sharing and OS 10.6.
    A business wants one (and only one) computer on the network to have several FMP data files on employees, and then have five computers with FMP client software open and modify those files.  Password protection is not important.
    It seems that:
    1.  The Mac having those data files must have a fixed IP and that IP must be used by the accessing computers
    2.  File sharing turned on.
    3.  The data files should be in a folder in the SHARED folder of the Users folder
    4.  Proper privileges need to be assigned to that folder
    QUESTIONS:
    •  1.  Is there any way for the guests to access the single computer without knowing the IP ?  Must the IP of the host computer always be fixed ?
    •  2.  Can sign on be facilitated by placing an alias of the folder on the dektop of the guests and storing the password, such that the guest merely clicks on the alias and the folder opens displaying the data files on the host computer ?
    •  3.  Since licensed FMP will be on all of the computers, the data file should open up with the client software on each computer, and any changes saved bat to the host.   Has there been any corruption by this technique ?
    •  4.  What happens if the host computer attempts access of one data file  at the same time a guest is accessing ?    Is access denied ?
    •  5.  In this setting, is "the Cloud" (with name and password protected web access) superior to local file sharing ?
    They are on low bandwidth ADSL.  The CEO of this business does not want to use "the Cloud" to host the data files, and doesn't want to use a stand alone local server.
    Thank you.

    Forget the above.  They decided to manually transfer data files with USB thumb drives.

  • Help using /AFS/BAPI_PO_CREATE with multiple schedule lines

    I'm using /AFS/BAPI_PO_CREATE to create POs and everything works fine until I pass an item with multiple schedule lines. 
    When you pass multiple schedules it is giving each of the schedule lines under an item the same grid value!  So if I want to order one black, one white shirt...  both grid values are changed to black when the PO is created.
    I'm wondering if you need to pass some sort of sequence value into the BAPI when you have multiple schedule lines for an item.  Does anyone know?

    Hi Justin
    Please make sure that you are specifying the <b>item number</b> while passing the ITEM Details and their correponding SCHEDULE lines.
    Though i couldnt find FM: /AFS/BAPI_PO_CREATE in our system, i guess it is similar to BAPI_PO_CREATE.
    Kind Regards
    Eswar

  • Help using m2t files with Final Cut! :D

    Hey everyone! I trying to work with a .m2t file of HD footage I've downloaded, I can't seem to open it with Final Cut or Motion, what will I need to do to access this file? Can anyone help!? Thank you

    Use MPEG Streamclip to demux/convert the m2t file(s) into whatever format matches your FCP Sequence settings.
    -DH

  • Help using dynamic XML with Tree Menu

    Can some one please help me? I don't know what I'm doing
    wrong. I'd simply like to be able to load an XML file of data and
    use this data to populate a Flex tree component.
    The XML file needs to reside on the server and will change
    from time to time, so I am loading it via an HTTPService call. The
    part that I can't get to work is the way the
    XML is displayed in the Tree component. It ends up blank or
    sometimes I just get the result of "[object Object]". I know my
    syntax must be screwed up somewhere, but because
    AS3 and Flex are new territory for me, I can't get it to
    work. I am feeling my IQ drop on a minute to minute basis. Please
    help me if you can! Thanks!
    In this example, I am expecting a list of the different
    groceries/categories to show up in the tree menu. Instead, I get
    nothing.
    HERE IS THE XML FILE, CALLED "groceries.xml":
    <catalog>
    <category name="Meat">
    <product name="Buffalo" cost="4" isOrganic="No"
    isLowFat="Yes"/>
    <product name="T Bone Steak" cost="6" isOrganic="No"
    isLowFat="No"/>
    <product name="Whole Chicken" cost="1.5" isOrganic="Yes"
    isLowFat="No"/>
    </category>
    <category name="Vegetables">
    <product name="Broccoli" cost="2.16" isOrganic="Yes"
    isLowFat="Yes"/>
    <product name="Vine Ripened Tomatoes" cost="1.69"
    isOrganic="No" isLowFat="Yes"/>
    <product name="Yellow Peppers" cost="1.25"
    isOrganic="Yes" isLowFat="Yes"/>
    </category>
    <category name="Fruit">
    <product name="Bananas" cost="0.95" isOrganic="Yes"
    isLowFat="Yes"/>
    <product name="Grapes" cost="1.34" isOrganic="No"
    isLowFat="Yes" />
    <product name="Strawberries" cost="2.5" isOrganic="Yes"
    isLowFat="Yes"/>
    </category>
    </catalog>
    HERE IS THE MXML FLEX FILE THAT ISN'T WORKING AS I'D LIKE IT
    TO:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute" initialize="initializeHandler(event)" width="240"
    height="340">
    <mx:Script>
    <![CDATA[
    import mx.collections.XMLListCollection;
    import mx.collections.ICollectionView;
    import mx.controls.List;
    private function initializeHandler(event:Event):void {
    textService.send();
    private function resultHandler(event:Event):void {
    myTree.dataProvider = textService.lastResult.catalog;
    ]]>
    </mx:Script>
    <mx:HTTPService id="textService" url="groceries.xml"
    result="resultHandler(event)" />
    <mx:Tree id="myTree" labelField="@name" showRoot="false"
    x="20" y="20" width="200" height="300" />
    </mx:Application>
    Any help is deeply appreciated.

    You must specify a resultformat of e4x. The default
    resultFormat is object. Object only works when you have a very
    simple xml structure that can be consistently represented as a set
    of objects.

  • Need help using school network with mail and ichat....

    so at my local community college where i go, they have free wireless as most colleges do. the first time i open safari on campus, it redirects me to a website where i have to log on the network using an email address. it then logs you on as a guest. when i am on their wireless i am unable to connect to ichat or retrieve my mail. being that the mail is more important to me i posted it in here. i have tried to get it to work numerous times and figured i would rather post here first before i go to the it guys here at school. any help would be great...thanks in advance!!!! off to class for a couple hours right now i will check back later to see if i can answer any questions that can help you guys help me figure this out...i feel like it should be simple to do, but starting to think that maybe it is not possible?

    yea i have the same problem in my college so if any one can help id appreciated

  • Need help using hierarchical list with class cl_salv_hierseq_table

    I'm trying to learn how to use a hierarchical avl.
    so I grabbed this code http://wiki.sdn.sap.com/wiki/display/Snippets/displaysimplehirarchiallistwithclass+cl_salv_hierseq_table
    and changed it in order to use the tables bkpf and bseg instead

    TABLES: bkpf.
    TYPES: BEGIN OF ty_bkpf ,
           belnr LIKE bkpf-belnr,
           bukrs LIKE bkpf-bukrs,
           gjahr LIKE bkpf-gjahr,
           bldat LIKE bkpf-bldat,
           waers LIKE bkpf-waers,
           END OF ty_bkpf.
    TYPES: BEGIN OF ty_bseg ,
           buzei LIKE bseg-buzei,
           shkzg LIKE bseg-shkzg,
           END OF ty_bseg.
    DATA: it_bkpf TYPE STANDARD TABLE OF ty_bkpf ,
          it_bseg TYPE STANDARD TABLE OF ty_bseg .
    DATA: ibinding TYPE salv_t_hierseq_binding.
    DATA: xbinding TYPE salv_s_hierseq_binding.
    DATA: gr_table TYPE REF TO cl_salv_hierseq_table.
    SELECT-OPTIONS:
      ndoc FOR bkpf-belnr,
      empr FOR bkpf-bukrs,
      anod FOR bkpf-gjahr.
    START-OF-SELECTION.
      PERFORM get_data.
      PERFORM relat_tables.
      PERFORM display_alv.
    *&      Form  get_data
    FORM get_data .
      SELECT belnr bukrs gjahr bldat waers
             INTO TABLE it_bkpf
             FROM bkpf
             WHERE belnr IN  ndoc AND
                   bukrs IN empr AND
                   gjahr IN anod.
      IF sy-subrc = 0.
        SELECT buzei shkzg
               FROM bseg
               INTO TABLE it_bseg
               FOR ALL ENTRIES IN it_bkpf
               WHERE belnr = it_bkpf-belnr AND
                     bukrs = it_bkpf-bukrs AND
                     gjahr = it_bkpf-gjahr.
      ENDIF.
    ENDFORM." get_data
    *&      Form  relat_tables
    FORM relat_tables .
      xbinding-master = 'BUKRS'.
      xbinding-slave  = 'BUKRS'.
      APPEND xbinding TO ibinding.
    ENDFORM. " relat_tables
    *&      Form  display_alv
    FORM display_alv .
      cl_salv_hierseq_table=>factory(
      EXPORTING
      t_binding_level1_level2 = ibinding
      IMPORTING
      r_hierseq = gr_table
      CHANGING
      t_table_level1 = it_bkpf
      t_table_level2 = it_bseg
      gr_table->display( ).
    ENDFORM. " display_alv

  • Help using time machine with a macbook pro

    Can you force a backup to time machine? I have a laptop & it is not always connected to the external hard drive or not always on. I want to just backup every day or so at my convenience. whenever I connect it now it does not even show a scheduled time to backup.

    Click on the Dock's Time Machine icon and select Back Up Now.
    Make sure your Mag Safe is connected otherwise TM will not perform any backups.

  • Unable to use IN clause with omniportlet

    I am attempting to use a stored procedure with omniportlet. I have put together an IN clause in my sql statement that will not work. I think it is because of the way omniportlet handles tics, or something.
    I had a similar post on using an ORDER BY with omniportlet that I suspect is a related error.
    I am trying to use omniportlet, but I must confess that I am not very impressed. The SQL part of omniportlet leaves a lot to be desired.
    Does anyone know when there will be a new version?

    Thanks for your response. Do you know if the new portaltools/omniportlet contains the fix for the problem in this thread? I have an open tar and I know there is a bug report on it, just don't know status.
    need help using stored procedure with omniportlet
    I try to use an IN clause like this ('item1','item2','item3'). If I type it in, it works. I am feeding it via a picklist from a dynamic page. If I choose 1 item, it works. If I pass more than one item and try to build my string in the stored procedure for the IN to use, I can't get it to work. I have tried creating a list with the tics and commas, leaving off the first and last tics and just using the ones in the rest of the string.
    NOTHING WORKS. I have an insert inside my stored procedure that puts the string I am building inside a test table, so I know what I am using works in SQL/PLUS. Just not omniportlet. I suspect it is the same kind of problem referenced in the above url.
    There is a bug with using omniportlet when your IN clause is a variable.

  • I restore my iPhone 4S on iTunes and then when restarted it is asking for valid SIM card and I don't have SIM card for that, I was just using the iPhone with wifi, any one can help? Please.

    I restore my iPhone 4S on iTunes after the restore was completed the iPhone was restarted and now asking for valid SIM card which I didn't,t have and I was using the iPhone with wifi, and now can't use it because the screen is locked for SIM card. Can anyone help me please.
    Thanks,
    David

    wjosten wrote:
    Phil0124 wrote:
    I doubt the phone is locked to GCI in any way
    Well, you're wrong, & in fact not only is it locked, GCI does not offer unlocking for iPhones.
    Fact is your post won't help the OP.
    And you are 100% sure its locked to them? How can you know this? While GCI does not offer unlocking that does not mean the phone is actually locked to it. Get off your high horse.
    Its possible the original owner had an unlocked phone. he was using with GCI. Or that GCI doesn't actually have locked phones. Seeing as they don't even have their own infrastructure but instead use AT&T's I doubt they'd have iPhones specifically locked to them and that would be the reason they do not offer unlocking (because there's nothing for them to unlock). And just to clarify, I'm not saying for a fact its not locked to them. It very well maybe be, but without knowing more about the phone and going by the fact GCI uses AT&T infrastrucure its possible its not locked. But here's no way to say for sure either way.
    Trying a Sim card from AT&T or another carrier might just help the OP if its actually unlocked or locked to AT&T rather than GCI.

  • Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me out

    Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me ou

    no i called the store owner from whom i bought it. he was like i will check in records and if there is something i will let u know...he was like send an e-mail its better so if it was stolen so the shopkeeper wouldnt let me to e-mail to the owner

Maybe you are looking for