Help using the Connection Trunk command

Hello Group,
I could use a bit of assistance accomplishing the following.
I have two Cisco 1760 Routers with a WIC 1/DSU T1 and one VIC2/E/M in each router.  I am new to CLI commands and could use some tips.
I would like to set up these routers (I will call them Router A and Router B) to communicate with each other via a internal IP network which spans between two seperate locations. 
I would like to set up these routers to use the E&M ports to send and receive audio between locations.  The E&M ports are connected to my external equipment which allows for transmit and receive audio to be delivered to the E&M port.  
I need to be able to allow for the routers to use 2 wire or 4 wire audio between locations, which is matched at both ends.   The routers do not dial phone numbers nor are phones in use at all.  Basically the routers are going to be used to send and receive two way radio voice between the locations which the radios are interfaced to the E&M ports. 
Can anyone please help me on configuring these routers to accomplish this and if I need to use the Connection Trunk command I can do so, as this is the only purpose of the routers is to relay audio between locations.
Please Help.
Thanks A bunch!!
Rick

Thank you for taking the time to reply,  However I have allready configured the routers to link the LMR sites together.   I have been connecting LMR assets utilizing ROIP for many years using non-cisco equipment which is specifically designed for ROIP, I have a large inventory of 1760 routers which were originally used for Telco applications which were replaced by newer equipment.  The fact that the routers have become "obsolete" does not mean that they are not usable for my application.   How can you make a statement that this is "limited equipment" when the intended use of this equipment for my application has been accomplished without limitations which are specific to my operation.  
I posted a request on this forum to obtain some help in the configuration of these devices from people who are familiar with the 1760 router.  Your response was the first response which I had received in regards to my request for assistance, I thank you for at least attaching a link to some resources which I can utilize.  Utilizing the services of a "reputable consultant" or "UC certified partner" would be acceptable in some circumstances, however utilizing the services which would be provided by such would only pose limitations on our technical skills.  I do not want to have to rely on a third party consultants to acheive what is engineered and desgned in house by our staff. 
I am not looking to purchase new equipment, nor am I looking for consulting help on this issue as we manage and deploy equipment in house.  Enlisting the services of a consultant or certified partner for our Cisco equipment deployments would only add unnecessary costs and time to deploy equipment.  Again thank you for the link to the examples. 
Respectfully,
Richard Wiglesworth

Similar Messages

  • Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

    Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
    and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
    My questions are How do you direct this utility to point to the desktop or the TFTP folder
    does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
    My router is suppose to have 10.0.0.3 255.0.0.0
    Gateway of 10.0.0.1 255.0.0.0
    My TFTP Server 10.0.0.2 255.0.0.0
    How do I get the MAC address of the Router or the TFTP Server and which one  is required?
    my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
    =====================================================================================
    rommon 10 >
    rommon 10 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    ?=0
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    TFTP_FILE=
    rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    rommon 12 > TFTP_CHECKSUM=0
    rommon 13 > SET
    monitor: command "SET" not found
    rommon 14 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    ?=0
    TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    TFTP_CHECKSUM=0
    rommon 15 > tftpdnld
              IP_ADDRESS: 10.0.0.3
          IP_SUBNET_MASK: 255.0.0.0
         DEFAULT_GATEWAY: 10.0.0.1
             TFTP_SERVER: 10.0.0.2
               TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
            TFTP_VERBOSE: Progress
        TFTP_RETRY_COUNT: 18
            TFTP_TIMEOUT: 7200
           TFTP_CHECKSUM: No
            TFTP_MACADDR: 30:37:a6:49:35:a8
                 FE_PORT: Fast Ethernet 0
           FE_SPEED_MODE: Auto
    Invoke this command for disaster recovery only.
    WARNING: all existing data in all partitions on flash: will be lost!
    Do you wish to continue? y/n:  [n]:  y
    ARP: address resolution for 10.0.0.2 timed out.
    ARP failed with failure code 1.  TFTP transfer aborted.
    TFTP: Operation terminated prematurely.
    rommon 16 >       " not found
    rommon 17 >FE_SPEED_MODE=2
    variable name contains illegal (non-printable) characters
    rommon
    rommon 18 > set
    PS1=rommon ! >
    FE_PORT=0
    WARM_REBOOT=
    RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
    BSI=0
    RET_2_RCALTS=
    RANDOM_NUM=1600357627
    IP_ADDRESS=10.0.0.3
    IP_SUBNET_MASK=255.0.0.0
    DEFAULT_GATEWAY=10.0.0.1
    TFTP_SERVER=10.0.0.2
    TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
    TFTP_CHECKSUM=0
    ?=0
    rommon 19 > tftpdnld [ur]
    usage: tftpdnld [-hr]
      Use this command for disaster recovery only to recover an image via TFTP.
      Monitor variables are used to set up parameters for the transfer.
      (Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
      "ctrl-c" or "break" stops the transfer before flash erase begins.
      The following variables are REQUIRED to be set for tftpdnld:
                IP_ADDRESS: The IP address for this unit
            IP_SUBNET_MASK: The subnet mask for this unit
           DEFAULT_GATEWAY: The default gateway for this unit
               TFTP_SERVER: The IP address of the server to fetch from
                 TFTP_FILE: The filename to fetch
      The following variables are OPTIONAL:
              TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
          TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
              TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
             TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
              TFTP_MACADDR: The MAC address for this unit
                   FE_PORT: 0= (default), 1
             FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                            5=Auto (default)
          TFTP_DESTINATION: The flash destination device for the file
                            flash:(default), usbflash0:, usbflash1:
      Command line options:
       -h: this help screen
       -r: do not write flash, load to DRAM only and launch image
    rommon 20 > tftpdnld
              IP_ADDRESS: 10.0.0.3
          IP_SUBNET_MASK: 255.0.0.0
         DEFAULT_GATEWAY: 10.0.0.1
             TFTP_SERVER: 10.0.0.2
               TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
            TFTP_VERBOSE: Progress
        TFTP_RETRY_COUNT: 18
            TFTP_TIMEOUT: 7200
           TFTP_CHECKSUM: No
            TFTP_MACADDR: 30:37:a6:49:35:a8
                 FE_PORT: Fast Ethernet 0
           FE_SPEED_MODE: Auto
    Invoke this command for disaster recovery only.
    WARNING: all existing data in all partitions on flash: will be lost!
    Do you wish to continue? y/n:  [n]:  y
    ARP: address resolution for 10.0.0.2 timed out.
    ARP failed with failure code 1.  TFTP transfer aborted.
    TFTP: Operation terminated prematurely.
    rommon 21 >

    What I notice in the original post is this error
    ARP: address resolution for 10.0.0.2 timed out.
    which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
    HTH
    Rick

  • In the ReportDocument.Load method it tries to connect using the using the connection information embedded in the Report File

    Post Author: bhaveshbusa
    CA Forum: Crystal Reports
    In the ReportDocument.Load method it tries to connect using the using the connection information embedded in the Report File. When the application calls ReportDocument.Load(reportFileName). This
    tries to connect to the database using the connection information embedded in
    the "reportFileName". This was only realised on checking the ODBC Trace
    Log. The connection itself is not a problem. The problem is that the embedded
    connection information is related to OLD production system. And failed
    connections had raised some concerns.
    Note: I am using
    SetDataSource to populate the data for the report. So I don't need the
    connection.
    Is there any way I
    can disable this auto-connect?
    Thanks and
    regards,
    Bhavesh

    960738 wrote:
    I need a help in answering one of the issue encountered last week.
    I have created a database link and tried to access the information from a table using the program written in another language. The password provided was incorrect for that user while creating database link. So we expected that,while retrieving the data, Database connection has to be errored out as password provided is incorrrect.
    But unfortunately, user account was locked out. When i checked with DBAs they mentioned that it tries to connect 16 ports with in a min of time.we were shocked as it STOPS another scheduled jobs with that user. and affects production badly.
    As per the program, it has to connect only one time and yesterday we tried to execute the program in DBAs observation and it errored out as expected. Didn't tried for multiple ports.
    Now the question is, WHY the database connection established 16 times last week and caused user account locked. DBAs are unable to answer it. Any EXPERTs opinion on this would greatly appreciated.
    I have verified managing ports in oracle documentation, it was mentioned that if one port is busy it will try to connect to another port in the range of ports mentioned during the installtion. DBAs verified ports related file and it was blank. and they are not agreeing with this reason. Please HELP me in finding the correct REASON for this.
    is it a NETWORK issue or issue with DATABASE SERVER only?
    Thanks
    SSP
    Edited by: 960738 on Sep 22, 2012 9:13 PMDBLINK is 100% oblivious to the fact any port exists.
    DBLINK only contains username, password & TNS Alias.
    can you post actual SQL & results?

  • I sent iTunes to trash. I was able to recover the program but have to "put back" songs one at a time. Is there any way to put back from trash using the "select all" command?

    I sent iTues to trash by mistake (trying to delete files from "yesterday"). I got the program back but have to "put back" songs one at a time. Is there a way to put back multiple songs using the "select all" command or anything else? Thanks for the help.

    The prgram is in one location and the library (media + library files) are in another. Sending it all to the trash would take some pretty delibrate multiple actions and digging through multiple folders, so I don't know how this was managed unless there's something in Snow Leopard that's new. Occasionally I have moved a file to the trash in Finder that I didn't want to and I can use Finder's "undo" to undo the last move. With many files...?

  • Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

    I have this massage every time close ps cc
    Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

    You may get better help in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    If FINDER means Mac, read below (and try to give more information when asking a question)
    Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • Build mapping using the CONNECT BY logic...?

    Environment:
    OWB 10g Client on Windows XP Professional
    Repository - 9.2.0.4 on UNIX (AIX 5.2)
    Target - 9.2.0.4 - on UNIX (AIX 5.2)
    Is it possible to create a summary table mapping that uses the CONNECT BY hierarchical logic of SQL?
    I realize that I can put it in a procedure and execute that procedure as a post-mapping event, but in this case I need the procedure to be the only activity going on in the mapping.
    I can also plug the SQL into a materialized view but I wanted to see if there was some functionality that I was not getting from the documentation.
    Many thanks all suggestions.
    Gary

    Hi,
    Have you found a solution ?
    If not read on :
    I think your solution of making a procedure and calling it in a mapping is the best idea. But since you said that that there would be nothing else in the mapping, I believe you have to do a dummy mapping. That is, map the fact / dimension to itself, with the load type of the target fact/ dimension to 'NONE'. Also, set the operator property of the pre-mapping process to execute 'ALWAYS'.
    Hope this helps.
    Regards,
    V.Usha

  • "Cannot use the connection type ...."

    Nokia 6233
    Windows XP SP2
    LaunchApplication.exe v 6.82.70.1
    Bluetooth "i.Tech BlueCON U"
    O2 Bluetooth Dongle Drivers
    Using Bluetooth OK to download photos to PC, but no other function so far.
    Trying Nokia PC Suite to perform various functions - failure in all cases, common message is "Cannot use the connection type. Check that the needed hardware, software and drivers are available".
    No clues anywhere as to what is needed.
    Bluetooth clearly works. Nokia PC Suite can't use it.
    Totally stuck - wish to use PC connection to synchronise address books.
    Help, please.

    Hi,
    I think that PC Suite is not support your Bluetooth driver. Here you can find what drivers are supported:
    /discussions/board/message?board.id=connectivity&message.id=114
    Anyway, if Microsoft's BT driver support your BT HW, you can try to that stack also...
    So, if you want to try to use MS BT driver:
    1. Go to Control Panel, System, Hardware and Device Manager.
    2. Open Bluetooth Devices, select that device, click Action, Uninstall and OK.
    3. Click Action and Scan for hardware changes.
    (windows should automatic install MS BT driver)

  • Using the copy music command does not copy all the music

    When I used the copy folder command in Itunes, it only copied either the even or odd numbered tracks from each album....
    It does not copy all the tracks from each album!
    any help would be appreciated.
    thanks
    Norm

    Hiya!
    It depends on what kind of digital copy you have.  This article goes ino details regarding the two types, and depending on the type you have, you may or may not need the DVD to redeem the code.
    Transferring video from DVDs with iTunes digital content
    http://support.apple.com/kb/HT1539
    I hope this helps!  Best wishes and good luck!

  • Nokia Connection Manager - Cannot use the connecti...

    Can someone PLEASE try and help me
    I have the following details:
    Phone: Nokia C5;
    Operating system: Microsoft Windows XP Service Pack 2
    Nokia PC Suite: Version 7.1.60.0
    I cannot use bluetooth & USB connection. When I try to select it in the Connection Manager I get an error message "  Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia) ". I have tried to reinstall nokia pc suite but no result.  The connection worked before. The PC Suite of my computer was upgraded and now the bluetooth & usb are not working any more.
    Please Help Me
    Attachments:
    Nokia_Connection_4679E9820AC32C34D11CBCDBA8237BA5_5.jpg ‏20 KB

    Could you please try this?
    I am not sure whether this will solve your problem but you could try this once.
    1. Disconnect your phone from PC if connected.
    2 .Open Control Panel and go to ‘Programs and Features’
    3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
    4. Click on the ‘Change’ button on top toolbar.
    5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
    6. Restart the computer if prompted.
    7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • I can no longer use the keyboard shortcuts, 'command  C' and 'command   V'.  Did I inadvertently do something to my keyboard or computer that caused this?  Is there a way to fix it?

    I can no longer use the keyboard shortcuts, 'command  C' and 'command   V'.  Did I inadvertently do something to my keyboard or computer that caused this?  Is there a way to fix it?

    You can also check in System Preferences > Keyboard > Keyboard Shortcuts, make sure that custom shortcuts were not created using those same commands. If ones were, they could be creating a conflict. Step throuogh each of the items in the left list, checking the array presented in the right pane for each.

  • When I try to use the refine edge command I get this message could not complete the refine edge comm

    when I try to use the refine edge command I get this message could not complete the refine edge command because of programe error

    Quit the editor, then restart it while holding ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

  • Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enc

    Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?

    See here:
    I cannot save recent images.

  • Using the 'route print' Command in Windows 7 - Detailed Screen Captures

    The 'route print' Command from an Administrative Command Prompt in Windows 7 provides a variety of useful information.  Let's take a look at the output of a 'route print' Command to examine how the output data is grouped and to understand its logic.
    Let's begin by simply issuing the following command:
    route print
    An Administrative Command Prompt output shows the following the following sections of the Command Output:
    Figure 1 - Issuing the 'route print' Command from an Administrative Command Prompt in Windows 7
     Observing the output of the Command indicates there are 5 Major Sections.  The Sections include:
    Interface List
    IPv4 Route Table
    IPv4 Persistent Routes
    IPv6 Route Table
    IPv6 Persistent Routes
    On this Workstation a single Physical Network Interface is visible and has been assigned a DHCP Address of '10.1.1.36'. 
    The IP Stack for this Workstation is as follows:
    IP Address: 10.1.1.36
    Subnet Mask: 255.255.255.0
    Default Gateway: 10.1.1.1
    DNS Server: 10.1.1.1
    DHCP Server: 10.1.1.1
    DNS Suffix: YYY.YYY.isp-provider.net
    Most of the time our focus is upon the IPv4 Routing Table output.  Here are the sections of the IPv4 Routing Table output for reference.
    Figure 2 - The IPv4 Route Table output listing the 'all networks' route through the Default Gateway.
    The next IPv4 Routing Table entry indicates '10.1.1.36' (the Host Workstation' is a member of the '10.1.1.1/24' Network and would route packets out the '10.1.1.36' Interface.
    Figure 3 - The Workstation Host at '10.1.1.36' is a member of the '10.1.1.0/24' Network Subnet.
     The next IPv4 Routing Table entry indicates '10.1.1.36' may receive a Broadcast from the '10.1.1.0/24' Network (as noted by the Subnet Mask of '255.255.255.255').
    Figure 4 - The Workstation Host at '10.1.1.36' can offer a Broadcast on the '10.1.1.0/24 Network' (as noted by the 255.255.255.255 Subnet Mask).
     Another IPv4 Routing Table entry focused on Broadcast Addresses is the following.  The Host Workstation at '10.1.1.36' may offer Network Broadcasts to the '10.1.1.0/24' Network.
    Figure 5 - The Workstation Host at '10.1.1.36' can receive Network Broadcasts from the '10.1.1.0/24' Network (as noted by the '10.1.1.255' Network Destination).
     The next IPv4 Routing Table entries (3 of them) are focused on the Loopback Network Values of '127.0.0.0/8',  '127.0.0.1/32' and the Loopback Network Address of '127.255.255.255/32' respectively.  These Addresses provide Services to the Local Host (or Loopback Adapter).  The Loopback Network Destination of '127.0.0.0' provides access to the Loopback Network through '127.0.0.1' the Loopback IP Address.  The Loopback IP Address of '127.0.0.1/32' receives Limited Local Broadcast to the Loopback Network while the Loopback IP Address of '127.255.255.255/32' provides Limited Broadcast to the Loopback Network.
    Figure 6 - The Workstation Host at '10.1.1.36' uses 3 Addresses for Services to the 'Local Host'. All 3 Addresses incorporate the '127.x.x.x' format.
     Next the Routing Table includes 2 specific entries for the Multicast Network (224.0.0.0/4) for both the 'Local Host' or Loopback  Address of '127.0.0.1' and the Host IP Address of '10.1.1.36' that are '224.0.0.0/4' .  These are used for Multicast Network functions.
    Figure 7 - The Workstation Host at '10.1.1.36' includes 2 Multicast Addresses (starting with '240.0.0.0') reserved for use through either the Loopback Address '127.0.0.1' or the Host IP Address '10.1.1.36'.
     The last 2 Routing Table entries provides Services through Limited Broadcast Addresses.  The Network Destination of '255.255.255.255/32' are the Limited Broadcast Address Ranges for both the Loopback Adapter '127.0.0.1' and the Host IP Address '10.1.1.36'.
    Figure 8 - The Workstation Host at '10.1.1.36' includes 2 Limited Broadcast IP Address Values to Service both the Loopback Network '127.0.0.1' and the Host IP Network '10.1.1.36'.
    Finally, upon understanding the sections of the Windows 7 Routing Table there are additional functions available when using the 'route' Command.  This Blog entry is focused solely on output from the 'route print' Command.
    Summary: In this Blog entry focused on using the 'route print' Command from an Administrative Command Prompt in Windows 7.  Each of the defined routes for a Workstation running Windows 7 Enterprise were reviewed for reference.
    Lynn Lunik
    Chief Security Architect
    IT Pro Secure Corporation
    and exchangesummit.net
    blog <at> itprosecure.com

    I thought, it is my browser issues of not seeing the images.
    but as seen on the other comments, this not in my browser case.
    Can someone check on this and repost the images if needed?

  • Does importing my photos using the connection kit import in full resolution.

    I have been using the connection kit to import my photos. I was wondering if it imports them thin full resolution?

    Yes. You can reconfirm it with apps like Exif Wizard-Pro
    http://i1224.photobucket.com/albums/ee374/Diavonex/e6ac61de.jpg

  • When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    I just found the solution!
    Niel
    Re: Why is my Finder window popping up when I open my Safari window? 
    Jan 20, 2008 7:58 PM (in response to alak)
    Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252) 
    iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

Maybe you are looking for

  • Using BI Publisher template builder in Word in creating labels

    Hello, I'm not familiar with BI Publisher, but I should only do one thing with it, which seems rather easy. I need a rtf layout to be used in APEX to create an address label PDF-report. I tried using mail merge to create an empty table for the labels

  • USB CD is not available immediately when WinPE loads

    Short Version:  Is there a way to impose a delay so my USB 3.0 DVD drive can get ready before WinPE gives up and I get the "Unable to read task sequence configuration disk?"  It seems to be a timing issue, because it does work sometimes.  Other times

  • S.O.S. - The case of the missing TIme Capsule icon

    I am trying to connect my MacBook Pro to a local network. Our Macbook Air, iPad and three iPhones all have WiFi. No problem. My Macbook Pro has solid black radiating bars in the main menu. In Airport Utility, it shows the "Internet Globe" with a gree

  • How to create a Textfile asset programatically in BCC

    Hi Good Evening, I am trying to create TextFile Asset programmatically through eclipse. I can able to create project , but I cannot able to create Asset. Could you please send the document for creating asset in BCC programmatically . Regards, Nageswa

  • GetTableName using ResultsetMetadata. Not support ???

    I am using JDBC driver for MS SQL Server 2000 to connect to SQL Server 2000. In this I need to know the tablename of columns in the underlying query structure of the Resultset. The resultsetmetadata method getTableName() is not supportive. It returns