HELP! Vado HD plays fine one by one. No sound on Movie Maker preview.
When I eliminate the music, I have no sound at all on Movie Maker preview. Is this because it is a preview? I would upgrade to unlimited scenes, but I want to make sure I have sound.
Videos play fine one by one. I am trying to put them together to make one movie. Movie Maker adds music which I can remove, but my sound is notheard.
I I have tryed over and over to get clips to go together in movie format dunno why it wont work there are 8 -_5 to 20 sec clips? but it only shows about .5 of the clips and the sound and video will not match up!? Im at my witts end with this software on this thing!
Similar Messages
-
Help for an intro in my video i'm creating in movie maker
Hi, can anyone help, I am wanting an intro for my video that I'm creating in windows movie maker and wondering if anyone can help??? It would be really helpful and much appreciated many thanks.
What does this have to do with Pagemaker?
-
Help! Video plays fine in organizer, shows up red in sceneline
Hi there -- I'm new to premiere elements 8 and I'm trying to include a video clip in a sceneline. It's an .MP4 file from a digital still camera that also shoots video (a sony cybershot). When I look at the video clip in elements organizer, it shows up fine and plays with both audio and video. Looks great. Then I go to premiere elements and try to drag the video to the sceneline or to even click on the video clip for it to play. The video shows up as a block of red -- no image other than solid red. The audio still plays, but all I'm seeing is red (literally and figuratively at this stage...very frustrating). Anyone know why this might be happening or what can be done to fix it? In pre, the video can be seen in the media section on the right of the screen. But it turns red as soon as I drag it to the sceneline or click on it to play.
Any help would be much appreciated. Thanks!First, update to the latest version of Quicktime from Apple.com.
Then go to the ATI or nVidia sites and make sure you have the latest drivers for your video card.
It's possible this may fix it (depending on which camera it came from and how your system is set up. But, if it doesn't, you may need to convert the video file to a more standard format.
I'd recommend you convert that .mp4 to another format before you bring it into Premiere Elements. Video from still cameras usually does need to be converted before Premiere Elements can work with it.
The best program for converting mp4s is Quicktime Pro, which sells for $29 on Apple.com. It will convert it to a DV-AVI (if you're working on a standard definition project) and I believe it will also convert it to a HDV-quality MPEG (if you're working on a project for BluRay). -
I imported a movie into iMovie 11 from a Canon Vixia HFR 300 SD card with no problem. I have a new iMac running OsX 18.8.4 I think. I added chapter markers and shared it with iDVD. And burned it to a DVD. Towards the end of this 30 minute movie the sound just stops. I do remember some screen came up when I wanted to burn DVD that said something was wrong with files but I couldn't figure what do to fix it and allowed me to continue. Any ideas?
Hi
Either the problem is in iMovie or in iDVD
two notes
No Audio in iMovie
Most common origin is use of audio from iTunes.
Work around -
• Select needed audio to one new playlist
• Copy out this as an Audio-CD .aiff (not .mp3)
• Use this in the movie-project
Other origins are
1. strange / alient file formats as -
• .mp3, .avi, .wmv etc
• Convert them into .aiff 48kHz 16-bit and use this
2. the Mac is set wrongly in regard of midi -
• Close iMovie and other programs
• Start GarageBand
• Make a new GB-project and play some notes
• Close GB and Save
• Now try iMovie again
3. No audio when playback in iMovie 1 to HD 6.
a. in iMovie pref. - deselect ” Playback via Camera”
b. in System preferences - see that Audio out is not set to zero. Mine often does this
without me knowing why.
4. iMovie’08 & 09 & 11
• Toggle audio-scimming by cmd-K
Stuttering audio and video
1. FileVault is ON - Turn it off
2. More than 50 audio files in a movie-project
Mix down to one audio clip
3. Project is stored on one (USB) external hard disk - should be a FireWire one
4. the External hard disk is not Mac OS Extended formatted - but
UNIX/DOS/FAT32/Mac OS Exchange and this will not work for Video.
5. To little free space on internal boot hard disk.
I go for a minimum of 25Gb free space when project is imported and edited and this goes for
4x3 SD Video. For 16x9 HD my guess would be about 5 times more at least.
Neither Mac OS, iMovie or iDVD can address any other hard disk than the boot drive for it’s
scratch files. (Unlike Final Cut Express/Pro where You select scratch disk/s)
6. Network storage - DOESN’T WORK
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
•OR burn with Roxio Toast™ if You got it
Yours Bengt W -
Plays fine in iMovie but the sound disappears once exported to Quick Time
I read through all the little support things in the iMovie '06 help and nothing worked. No matter how many times I try to export my project to QuickTime everything works but the audio even though I've made sure the audio settings are correct. In iMovie the video plays and the imported song does as well but exporting loses the sound.
What am I doing wrong?Some possibilities:
Check out this thread for a possible solution: http://discussions.apple.com/thread.jspa?messageID=7305234� Perhaps renaming the file would help.
I don't know if ithis has an effect on the file, but why is it saved in documents rather than music or movies?
Also, are you using iTunes to convert the file to .aiff? Here is the procedure from iTunes help:
*Choosing AIFF and WAV custom import settings*
If you use AIFF or WAV encoding, you can use custom settings for greater control over the quality and size of imported files.
To choose AIFF and WAV import settings:
1. Choose iTunes > Preferences, click Advanced, and then click Importing.
2. Choose AIFF Encoder or WAV Encoder from the Import Using pop-up menu.
3. Choose Custom from the Setting pop-up menu.
4. In the dialog that appears, choose settings:
Sample Rate: The number of times per second the music waveforms are captured digitally. The higher the sample rate, the higher the quality and the larger the file size. Don't choose a sample rate higher than the rate used to store the music originally or you'll waste space. CD quality, for example, is 44.100 kHz, so choosing a higher rate when you're encoding from a CD is unnecessary. In general, the best choice is Auto, which uses the same rate as the original music.
Sample Size: The number of bits used to store each sample taken as the music is encoded. The higher the sample size, the better the quality and the larger the file size.
Channels: If you don't have stereo speakers or if your audio files are monaural (mono files are about half the size of stereo files), choose Mono. If you'll be listening through headphones or a stereo system, choose Stereo or Auto. Auto converts monaural tracks into mono files and stereo tracks into stereo files. -
My imac wont play any media .audio nor video. im using lion can anyone help me on this. One Love
my imac wont play any media .audio nor video. im using lion can anyone help me on this. One Love
it sounds like a tagging problem, but I'm not sure how to help.... what kind of files are they? Typically, if they are organized properly in WMP, they should organize well in the Zen... go to WMP and try the advanced tag editor.
F -
I sure hope someone can help me with these ipod classic 160gb issues.
My ipod classic 160gb will be playing fine and then freeze up (unable to move around in it at all) and i have to reset it. This happens constantly whether in my car or when i listen at work. After i reset it works ok for a while then eventually requires another reset.
Another problem is that it will be playing fine and then start shuffling through songs without playing them. The songs that get shuffled work fine in the itunes program but not on the device. A reset does not correct the problem with these particular songs.
Also, sometimes when it is working and not freezing up or shuffling through, it will appear that a song is playing (in fact it says "now playing"), the song titlte is scrolling, but the song progression bar does not move. The count up in front of the bar stays at 0:00, and the count down at the end of the bar stays at the song length minutes not counting down. After I reset, it works fine and all the songs will play.
The reason I got this thing was because i can control it through my steering wheel/radio while i'm driving. I previously had a Zune 80gb which i'm glad I held on to. I have over 6600 songs (so I'm obviously a serious music listener and obviously frustrated), but only about 10 songs were downloaded through itunes, the rest I either ripped or downloaded from other site. From what i've been reading it sounds like there's a lot of ipod owners out there experiencing similar problems. Does anyone have any suggestions to resolve these issues for me and everyone else? I got my first iphone 8 months ago, then the ipod and was considering an ipad. But in light of my ipod issues.....
I hope someone can help me and convince me it wasn't a mistake to go Apple! Thanks!!I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
Same mp4 video plays fine from one drive but not recognised from another??
Everytime I drag and copy my MP4 video files from my internal drive to an external one, it then no longer plays from the external drive. The external drive is working fine, and if I render the video directly to that drive, it previews and plays fine. This only happens to MP4 files I copy from internal drive to this external drive
Something seems to happen to the file when I copy and paste it or drag and drop it.
As I drag it I and when it lands in the folder I copied it to, the preview thumbnail is here for a split second, then switches to a regular QT icon - when i try to open it, it then says file format not recognised - even though the exact same file plays fine from the original location on my internal hard drive
This is driving me mad - any ideas - must be something simple?
Any help really appreciatedI used MPEGStreamClip to transcode the audio file to AIFF (over 1500 kbs @ 48khz) with better results. With the iTunes volume set at full and with the volume adjustment option set at 100% (which is 50% above flat), the AIFF file played through iTunes, produces about the same decibels as playing the file through VLC with the VLC volume at full.
Thanks much for your help.
I believe some of the problem is with the original file being a bit too quiet to begin with. Putting it into analog terms, it's kind of like a 1 watt pre-amp signal when it needs to be a 4. Do you know of a way to increase the audio output level through the cable box fire wire port so it can be captured at a higher audio level to begin with? -
All CD's that I burned for my library have an iCloud icon with an explanation point next to the song. If I right click it prompts me that 'This Item was not added to the iCloud because an error occurred. Some of my purchases have no cloud icon next to them at all and they play fine. Numerous purchases have 2 of the same songs listed..one has the cloud with the explanation point and the other has the cloud with a down arrow for downloading from the cloud. What I am having to do is delete the ones with the explanation point and then download the one with the arrow. It's taking forever. Then I still have to go back and re-burn my CD's and then back them up in iTunes Match. Any ideas of what's going on? and how to get this all done faster? Getting really frustrated!
Thanks
ringerman50i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason. -
Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?
It should be in the Users/ Shared folder.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
Regards
TD -
Using Lion, recent Movies with .mov extension will not play in Quicktime, but earlier ones taken with same camera (Kodak M530) will play fine. I have got VLC which runs them fine but cannot get movies saved in iPhoto to play in VLC...and of course its a real bugger to copy moves from iPhoto to another folder; in fact if anyone can tell me how to do that I will accept defeat!
Hello Shad:
Have you downloaded and installed Flip4Mac?
http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=windowsmedia
Barry -
I just downloaded an album into iTunes, all songs on album play fine on iPad, iPhone, but on my Mac there is one song that stops 10 seconds into it and then moves to my next song. Can I download this song again? How?
Other people have been having similar problems with songs over a number of days.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link. -
Downloaded an E.P. and all of the songs play fine except one which skips itself. The play count goes up and if I click later in the song it will play, but it doesn't play automatically, how do i fix this?
many thanks.
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard). However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore. HELP!!
Can you tell us about one or more of the video files - what are they? QuickTime? MP4? Something else? How did you create the video files in the first place?
I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files! I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
The solution was to (re)install QuickTime 7. But first look in your Applications > Utilities folder. When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder. If it's there, try using QT 7 to play one of your video files. If QT 7 is not there, you can download and install it from here Make sure you are running at least OS X 10.6.3 before you install QT 7. It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard. -
New songs synced to my ipod wont play, the songs play fine on itunes and appear on ipod but wont play..any help appreciated
So, if you select one of these songs on the iPods screen, and try to play it, what happens? The iPod does nothing? It skips to the next song?
It's possible you will have to do a Restore on the iPod, if there is data corruption on the iPod causing this problem. The Restore erases the iPod, and removes any corruption.
NOTE: There may be a hardware problem, such as the iPod's hard drive becoming unreliable, that is causing this problem and data issues. It may continue to operate as long as its data stays mostly unchanged, but if you do a Restore to update the hard drive's data in a major way, it is possible that the Restore will fail and leave the iPod non-operable.
Maybe you are looking for
-
HT1338 mail wont work since update
My mac did an update for iphoto and since then my mail wont open it says that this version of mail wont work with this system and to use the mail icon located in applications tried that and it still wont work HELP!!!!
-
How do I delete someone's icloud account from my ipad?
This person set up my new ipad with his apple ID instead of letting me create my own, I somehow got rid of it but now I've updated to IOS 8 and for some reason his icloud account is still on my ipad, I can't sign out and use my ID because I have to t
-
To boot my MacPro now, I have to go thru the reset Pram. Doesn't work each time. I usually don't turn my machine off. Booting in Safe mode does not work...when it doesn't boot I get only a gray screen, no icons in the screen like bad disk etc. I have
-
Error on uncompressing file:Error : ActiveX component can't create object
Hi, Users encountered the following error when they access BPC Excel from their workstation. [http://img33.imageshack.us/img33/858/activexcomponentcantcre.jpg|http://img33.imageshack.us/img33/858/activexcomponentcantcre.jpg] The problem happens when
-
I accedently deleted my System Preferences
Durring some reorganization, where I thought i was just deleting an icon, I apparently deleted my system preferences. If I got to apple -- system preferences, nothing happens, and when I search for it using spotlight I get nothing. Any ideas on what