Help very Need WRT 54G V7, firmware 7.00.6
Help very Need WRT 54G V7, firmware 7.00.6
I updated to 7.00.8 and now device work not stable
WhenI have 7.00.6 firmware it work not bad.
Well its not possible to restore the earlier firmware back on your Router. Since you have already upgraded the firmware on your Router, Have you resetted your Router and re-configured all the settings on it again? Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Similar Messages
-
Hi everyone,
My Mother's account has been taken over. She received an e-mail saying that her e-mail was changed, there was a link to report the abuse, but to do it you need to sign in - we can't, since that person changed the password most likely.
I can't contact ANY service, there is no live chat for me, no phone to call.
Can someone please help?
Her account is (removed for security) . the only correct e-mail is the one registered, it was never changed by us.
And this scumbag who took her account is now online! Please help us to get the account back
Solved!
Go to Solution.Just open the link below to report your hacked/stolen account. Select Security and Privacy as Help Topic and Identity Theft/Account Takeover as the Related Problem. Then Click the Continue Support Request button near at the bottom of the page.
https://support.skype.com/en/support_request?needsLogin=false&topic=****************241&problem=****...
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com -
Updating the firmware Router WRT-54G ver2
Good morning guys!
Im trying to update the firmware of my router WRT-54G Ver 2. But when I selection the version of my hardware, the FW file is this one:
WRT54G_v4.21.1_fw.zip
Is it the right file? Im scared cuz my hardware is ver 2, and this v4.21.1 looks like for a v4 version... Can any1 help me?
Thx
Solved!
Go to Solution.Thx guys
I'll flash it now -
Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! i never backed up on itunes ..please help
No. The contacts are "owned" by the Exchange server.
The Exchange server is owned by the company.
Everything on the Exchange server is owned by the company.
If you quit or were terminated, and your access to the system has been revoked, then there is nothing you and do at this point. Once you deleted the account from your phone, all of the associated data was deleted.
NEVER store personal information on company systems. -
hi i very need help my ipod touch 4th was already damages (the glass screen wasnt in the silver part) and yestarday i was cleanin my room while listeng to music and my ipod fell 2 times after about 30 min half of the screen was light white first i thought it was a virus so i fully shut down my ipod and i also restored it but it didnt work so looked closly and saw that the left corner on my ipod was badly dented inward after i thought for a bit i thought that the spary i was using to clean my room could have gone in my ipod because the glass screen wasnt in the silver prt but i dunno if this prob cant be fixed at home by me does someone know how much it will charge 2 get it fixed and where i can get it fixed THANKS it wuld be a great help plz reply as soon as possible xoxoxox
This has happened to me but i don't know what to do because my Itunes kept closing down and it shut down half way through updating and it just comes up with a silver apple and it won't turn off and now it's just frozen and it also doesn't recognise it when i opened up itunes again after i reset it to the factory settings
-
I dislike Adobe....I can't get the help I need. This is very frustrating.
I dislike Adobe....I can't get the help I need. This is very frustrating.
Rob I am sorry I didn't mean to cause any problems, it is just that I was having so many difficulties with my purchase and I couldn't get any help. I tried to chat with someone and your system told me that I didn't have that option or something like that. I couldn't find contact telephone numbers either. I finally got to chat with someone that helped me, but that was at the very end. Anyways, I figured things out. I apologize for being so rude and referring that I hate Adobe. I actually don't, I just didn't like it that I couldn't contact anyone for help.
-
MSI MS 7100 K8N Neo 4 Diamond need bios configuration help very urgent
Hello every body i need very urgent help,
i need help on above mainboard bios conf. i will attach two seperate hdd (120 GB sata II) and i will setup W2003 standart 32bit ed.
if possible i won't use any raid configurations, but i need speed
how should i conf. bios and which controller shouşd i use silicon or nvidia or how and wich has to be used.
corecction about my configuration
Mainboard MSI MS 7100 K8N Neo 4 Diamond (NF4 SLI,GLAN,SATA)
CPU AMD Athlon 64 X2 3800+ (2.0GHz,1024K Cache,S939) BOX
Ram CORSAIR Value Select DDR400 1024MB Kit (2x512MB)
Hdd SAMSUNG 120GB 7200RPM 8MB SATAII (2x120GB)
Graphic Card SAPPHIRE 256MB ATI Radeon X1600 PRO (PCI-E) AVIVO
Case ENLIGHT 7247 400WHello !!
The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
Good Luck
Greetz MurdoK -
Bought with "hands" iPhone 4-cdma (and it is tied to the old Apple ID owner data I do not know) what to do? Very need help
You are experiencing Activation Lock. If the previous owner will not remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht1766
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process. -
WRT-54G and Other WiFi Routers Install Possible Solution!
The live chat turned out to be VERY helpful.
One thing I discovered was that trying to install on Win Vista wasn't working BECAUSE IE7.0 was crashing the firmware upgrade. While I thought that I had done that yesterday, it turned out that it hadn't. Instead, I tried to enter the firmware page (192.168.1.1) using Mozilla Firefox and found that it hadn't installed correctly. I couldn't even reach the page with IE7 but instead kept getting the "Page Not Found" error, even using WinXP as the operating system.
I'm NOT sure the WRT-54G will work when I try to install it tomorrow at a clients home, but I've gotten a lot further along using the Mozilla browser than the IE7 browser.
If you keep spinning your wheels and can't get the bloddy thing to work, I would suggest installing Mozilla first, setting it as your default browser (you may want to keep it that way), THEN trying to install firmware updates and reinstall the router.
Hope this helps.
Best Wishes
Arne
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by daikunzeon on 07-30-2007 09:56 PMIntel macs, since 25 febr.
"watching outbound connections through Little
Snitch"
Interrupted connections under some circumstances
after applying the AirPort Extreme 2007-001 update:
This is (often) soluble by disabling any third-party
wireless signal monitoring or sniffing utilities.
I don't think Little Snitch was causing any problems, for me at least. It did let me see that it was trying to talk to the other machine's non-active IP address, which is what led me to turning off the other network ports.
It's quite informative to see which TCP and UDP ports are being actively used, and where they're going. -
So, I have this WRT-54G that I got from a freind a while ago. It has worked pretty well mostly. Previous to this week, every once in a while (once a week maybe?) it would disconnect from all of the computers in the house, and not let us reconnect. Opening the "Wireless Networks Available" screen would show my router, with 5 bars of connectivity, but when I would double click it, it would think for a few seconds and then say it couldn't connect. Once in a while, it WOULD connect, and I would be able to get online just long enough to open an email or two, and then it would disconnect again. Anyway, usually waiting a couple hours, or overnight, and it would magically be working again in the morning.
Now, this week, it's in a constant state of that "showing 5 bars, but won't connect, except sometimes, when it disconnects me almost immediately." I've moved it from the other room, to where it's sitting 2 feet away from my computer, so range/interference shouldn't be an issue.
Does anyone have any idea **bleep** is going on here? Why would I be able to see the router on the network, with 5 bars, but not be able to connect to it? (yes I have the right wpa password and all that) Is my router just borked and I need a new one? Is there some setting somewhere that says "Don't be lame."?
Any advice would be appreciated.
Thanks.
-NickFirst of all, please wire a computer to your router. Do not connect any computers wirelessly. Does this wired connection work properly? If not, DO NOT proceed with the suggestions listed below. We will need to get your wired connection working properly first, then fix the wireless problem. Report back with the problems that you are having with the wired connection.
Assuming that your wired connection works properly, then proceed with the following:
There are many causes for poor wireless connections, and many solutions:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings.) Reboot computer. Return to "Preferred Networks" and re-enter your network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. You should connect automatically. If not, temporarily turn off your computer's software firewall.
If the above does not fix your problem, download and install the latest driver for your wireless card.
Some users have reported improved wireless performance by switching to WPA encryption.
If you continue to have problems, try the following:
For wireless g routers, try setting the "Transmission Rate" to 54 Mbps.
If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Hope this helps. -
Linksys WRT-54G-TM router Firmwere Locked????
any one have an idea how to change the firmware out these units they are Super "g" with 32MB of ram and 8MB of flash i want to change out the firmware but it just gose back to the stock firmware it seems to be based on Linux it's an WRT-54g T-Mobile box v 1.1
Message Edited by punker_4_real on 07-22-2007 02:09 PMThe Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
WDS network
If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed. -
OK, I had a wired PC hooked up along with a wireless laptop all working great for over a year then I had to unplug some cables and when I turned everything back on I lost all connection.
The cable modem works fine if I plug it directly to the PC but I get nothing going through the router. I tried pinging it but get nothing. The power light flashes.
HELP................I have experienced a similar problem a couple of times in the past month - usually after a power outage. I'm able to log into the router, run traceroute diagnostics ok, but the router doesn't seem to allow any wan access from the lan side. No internet restriction, etc. My ISP's router is fine, and issues my Linksys router a DHCP address ok. If I plug a PC directly into the ISP router, everything's fine. Have tried unplugging everything and cold starting (first ISP router, then Linksys) - nothing. My WRT-54g is a v2.2 - firmware 4.21.1 I mainly have it there as a wireless access point, and to allow a DMZ on the network between the two routers.
The only thing thing that works is to reset to factory defaults. From there, the only things I change are password, MAC filter on wireless, SSID, and wireless channel. It's starting to get annoying - any help is appreciated. -
My situation is not one that I can handle and could use some help in getting it to work.
My internet connection(Modem) is in my office(rear of apartment) where I have three computers, but only two at any given time that are needed for connections to the internet. This is where I have my first WRT 54GS set-up and plugged in. I am also using a wall connect extender to relay my to my second WRT 54GS, which is in my living room where I have a Smart TV and my XBox connected to it(the router) through another extender. My extenders are Netgear. Now this works as long as I keep switching the common connection back and forth in the office from the router to the extender oir the modem to the extender.
My question is simply this...Is there a way I can run this all without haveing to switch the ethernet cable each time I want to use my XBox or the Smart TV in the living Room along with my office computers?
I am NOT even sure I have this set-up correctly, but I do get it working the way that I have it right now so any help would be greatly appreciatied and welcomed.......I am not a network geek, but I do know a bit about computers.
I have Windows 7 on both computers in my office.
Office Router: WRT54GS VER 7.2
MODEL # CGNE1H160110
MAC # 001D7EFE324B
Living Room Router: WRT54GS VER2
MODEL # CDF50DAB5465
MAC # 00121747422D
Thanking You in Advance,
FrankHi there, Frankiejr2. I agree with FurryNutz and bigdave240 about using the 2nd router (WRT54GS VER2) as an access point. This is called LAN to LAN Cascading. To cascade the routers, here's the link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...
I hope this helps.
Help, learn and share -
Windows XP Clean Install – What I discovered and the help I need
Windows XP Clean Install – What I discovered and the help I need
I previously had a problem with my Laptop dying randomly you can read about it in the thread entitled Computer dies Randomly (Battery also dead) click to view
Before I realised the solutions, I thought that maybe my Laptop had become infected with a Virus and decided it would be prudent to do a clean install of the Windows XP operating system.
Everything went perfectly and thought a clean install was a good opportunity to download the “XP Service Pack 3” SP3 and did so, it seemed very quiet though and that’s when I realised I had no sound…
I downloaded all of the sound drivers I could find on the Lenovo site for 3000 N100 (I knew from previous experience that the “SOUNDMAX” driver is the only one that actually works with this 3000 N100) in order to install this you have to install the Realtek HD audio driver, but in order to install that you have to install some other Driver/Soft that only works with SP1 or SP2 if you try to install it with SP3 it will say that you don’t need the file as your Service pack is newer than the file you want to install, this is understandable as SP3 is not final as of yet (but it’s good to know).
My next problem was that my extra RAM was not detected, this was fixed by updating the BIOS, after installing all of the System updates, PC Doctor, everything I could find for 3000 N100 I decided to rest, I pushed the Lenovo care button and it did not work, I found a hot key driver and installed it but still the Lenovo care button does not work, previously when I pushed this button it would bring up the Lenovo menu but now it’s just a dead button, Does anyone know how to get this button working again?
I am pretty sure that everything else is working fine now, just that button not working is very annoying, is there a set routing of installs you must do to get everything working, i.e. bios 1st audio 2nd system update 3rd etc...
Please help, I hope I have helped you...
Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
Solved!
Go to Solution.Ok first everything works now... except the Lenovo Care button, I just posted the other stuff cause it might help other members, I have searched the forum for an anwser to this problem but there was only one anwser (suggesting to uninstall the driver restart and re-install it) and it did not result in a working Lenovo Care button...
I don't beleive the Lenovo keyboad drivers are in any way related to the Service pack 3 as they do not use the Service pack files, to back this up I also had the same problem when Service Pack 2 was installed...
The Lenovo Care button works fine on Boot up screen to access the rescue and recovery software (So the mechanics of the button are fine) but once Windows XP loads it is just a dead button, I remember it used to open up the Lenovo Care Start bar, I got it working once in the past but I can't remember what I did, I thought someone here might know the anwser... -
I have been trying all day to set up my parent WRT 54G router. The router used to work fine, but we've had some renovations done tot he house and I've recently moved them back in.
I've managed to be able to connect (via Ethernet) to the router in order to configure it, and I've been able to connect to the ADSL modem and have configured that too. I was told to make sure that the modem was set up to allow bridging, and I've done this.
The problem comes when I try to connect the modem to the router to my computer. The router doesn't recognize that it has an internet connection. Further, when I've tried using Linksys Easylink Adviser I'm told that the program doesn't recognize the router even though all the correct lights are lit or flashing. I have tried resetting both the modem and router multiple times. Any help would be greatly appreciated.if the connection is proper and the lights are lit up fine as well then open IE on the computer that is wired to the router....type http://192.168.1.1 .. logon keeping the username blank and the default password is "admin"....once on the set up page , go to Mac Address Clone subtab , click enable and click clone your PC's MAC .... save the settings...now under the Basic Setup subtab , change the internet connection type to PPPoE and enter the username and password info.....save the settings and do a power cycle....see whether this helps u
Maybe you are looking for
-
Apple TV not showing up in device list in iTunes
Apple TV stopped showing up in the devices list in iTunes when I tried to sync my movies, and iTunes froze in mid-sync. Since there is no "eject" button for Apple TV in iTunes, the only thing to do was to close iTunes. When I opened it up again...no
-
Regarding VPP for Education; 1. I have created the Program Manager 2. I have created my Facilitator 3. Do I need to create sub account for the people redeeming codes?
-
says "an error occurred while trying to confirm account info, check network connection" i am connected to network, iphoto is updated, what else can i try?
-
Printing of Invoices during background Jobs
Hello, We have an o/p type that is processed each time a billing document is created. The o/p type prints the billing document as soon as it is saved. When we have a billing due list program run in background the printouts are waiting in the Spool an
-
Media movement for ... waiting for input since...
Hi, guys! *1. I created rotation policy:* ob> lsrot -l rp_test: Rotation rule 1: vl_test : windowclosed : 15 minutes Rotation rule 2: test_offsite : expiration : disabled UUID: e915b170-5416-102e-b112-000b5df3a54e *2. and seted vaulting policy:* ob>