Help viewer is not helping

I have an intel mac notebook and it works great -- except for the help viewer which has gone from very slow in responding to not responding at all. I followed all the tips for resetting the viewer (deleting help p lists, etc.) and that will fix it temporarily. But everytime I restart my computer, I have to delete those same files again to get the help viewer working. I finally went to console.log and this is the message it is displaying but I need help in translating it. Please Help! I'm an ex-windows user and this is my first mac and I'm really dependant on the mac help.
2006-05-13 09:55:55.217 Help Viewer[272] * -[NSBundle load]: Error loading code /Users/annatsao-abellera/Library/InputManagers/Smart Crash Reports/Smart Crash Reports.bundle/Contents/MacOS/Smart Crash Reports for bundle /Users/annatsao-abellera/Library/InputManagers/Smart Crash Reports/Smart Crash Reports.bundle, error code 2 (link edit error code 0, error number 0 ())
2006-05-13 09:55:55.427 Help Viewer[272] * NSRunLoop ignoring exception '* End of archive encountered prematurely at 400' that raised during posting of delayed perform with target 37bda0 and selector '_setupTOC'

Just in case, here's Dr.Smokes Help Viewer Tips.
It also wouldn't hurt to try using Disk Utility to repair your startup disk (hard drive) as shown in his Resolving Disk, Permission, and Cache Corruption.
You might have a little directory corruption and it's suggested in the Help Viewer Tips.
Cheers!
DALE
Message was edited by: Dale Weisshaar

Similar Messages

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Drive Utility Help Viewer "does not know how to handle selected URL"

I have Drive Utility 10.5.6, according to . I'm trying to reformat a FAT32 partition on an external drive to Mac OS X Ext. Journaled in preparation for using SuperDuper to back up my Mac HD boot partition. For a time, which seems to have passed, now that erasing the partition has been done. The Disk Utility Help wouldn't work. Instead of putting up topic information, I got a message saying "Help Viewer does not know how to handle selected URL", followed by an reference to an html file that allegedly existed inside a set of folders inside the app. Where, of course, Finder cannot see. Once the erasing was done, Help seems to have come back. I tried Apple Support, but could only get a reference to OS 9 Appleworks macros not working in OS X. No help at all. Is this a question? I don't know. Help is working now. But for a while it was very annoying. It must be one of those little windows glitches that no one ever bothered to fix.

In order to change a FAT or NTFS formatted drive for use with OS X you will need to do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you have an Intel Mac and can partition the drive using GUID then you can have FAT32 and OS X partitions on the same drive.
As for problems with the Help viewer see:
In most cases doing the following will restore the Help Viewer:
1. Trash the following three files, if extant:
/Home/Library/Preferences/com.apple.help.plist
/Home/Library/Preferences/com.apple.helpui.plist
/Home/Library/Preferences/com.apple.helpviewer.plist
2. Trash the /Home/Library/Caches/com.apple.helpui folder.
3. Empty the Trash and Restart.
Visit The XLab FAQs and read the FAQ on the Help Viewer for additional suggestions.

My Help Viewer is not working for mac help

My Help viewer is not working for mac help. Everytime i choose mac help the window opens then closes. But when i open another help like safari help it opens and works fine. If i switch it back to mac help the window just closes and the application quits.
If you know how to fix please telll!

noname212,
Using "Search Discussions" with the term "Help Viewer" you will lead you to numerous posts which refer to Troubleshooting Help Viewer by Dr. Smoke.
Good Luck
;~)

Adobe Indesign: Adobe Help Viewer is not available! All Updates installed. How to fix?

Hello,
I have CS6 Design Standard installed on Windows 7 x64.
When i choose the Indesign-Help in Menu i get a "Adobe Help Viewer is not available" Error.
All Products are on the latest updates.
How can i fix this?
Greetings
Sebastian Schad

I have already tried this KB Adobe Help Manager | Troubleshoot Error Codes but this option is not available

Help with Importing psd's, looks good in viewer, but not in canvas...

I have been searching for threads related to this issue, and this is what i've come up with...
It is my sequence settings, the picture looks great in the viewer but not in the canvas, as soon as i put it in the timeline, it goes blurry almost. I tried changing my settings to HD 16:9 and the picture looks great, but I need standard (NTSC DV 4:3), does anyone know a way around this? I can do it in Avid fine, why am I having such a hard time in FCP?
Thanks
P.S i have tried changing my image size in photoshop to 720x480 and 720x540 and it doesn't seem to make a difference.
Jana

The canvas is a low resolution proxy.
What does your sequence looking like on your NTSC production monitor?

View attributes can not be retrieved. View instance not found or undefined

Hi,
I am creating a simple master detail OAF page. For this I have done following steps:
1. Created ParentEO and ChildEO
2. Created ParentVO with a transient attribute called "SelectFlag" with default value "Y" .
3. Created ChildVO
4. Created a UserViewLink.
5. Created Application module (UserAM).
6. New Page UserPG
7. In the main region I have defined Application Module.
8. Under the main region, I have created a new advanced table region with following properties:
View Instance : ParentVO1
Detail View Attribute : SelectFlag
View Link Instance: UserViewLink.
Now when I click to select the "Child View Attribute", it gives a pop up saying "View attributes can not be retrieved. View instance not found or undefined".
Please help, I am not able to proceed on this.
Thanks,
Anupam

Anupam,
I do not see in your steps where you associated the VO with the AM. In order to select an attribute, the AM must have an instance of the VO associated with it. Double click the AM in the navigator. Click Data Model and shuttle the VO's you want to be available from the left to the right.
Hope this helps.
Kristofer

Database View do not refresh in ADF application

Greetings,
im facing a weird problem in my application (JDeveloper 11.1.2.4.0 - ADF). All this time i was working directly with tables (VO), but now i also started using database views.
Everything works fine, when i add a new row in a table that my Database Views is associated with, it refresh properly.
BUT if i delete rows manually from my database, the View do not refresh in my application, not by refreshing the page,
redeploying application, even executing the view object query inside the view object. The only way for the DB View to be
refresh inside the JDeveloper and on deployment time is by restart JDeveloper. I try adding an action on my OV to re-execute them when
i do something specifically, hopefully the will reset the cache and retrieve the DB view again, but with no luck..
Correction: now it doesnt even refresh on restart jdeveloper.
Just for the clarification, im talking about Database Views, and not just Object Views. I create a Object View inside the application to retrieve the data
from the Database View results.
Can you help me on this please?

Yes the queries in SQLDeveloper was showing me correct results.
But i feel disappointed.. When i went to close SQLDeveloper to try something, it pop me a message to commit/rollback changes.
After i commit them, my app show correct results too.

Error in pakcage table or view does not exist but on sql prompt query works

Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0
The below package compiled in system user and trying to query on view v$session_wait however getting below error.
PACKAGE BODY SYSTEM.PK_DB_ALERT
On line: 212
PL/SQL: ORA-00942: table or view does not exist
I can execute same query mentioned below from sql prompt from system user and it works fine however it doesn't like from package, Please advice, thank you in advance.
SELECT SID, seq#, event, wait_time
FROM v$session_wait
WHERE event NOT LIKE 'SQL*Net%' AND wait_time <> 0
ORDER BY 2

SDD wrote:
Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0Which means package owner is granted select on view not directly but via roles. However, roles are ignored by definer rights packages/stored procedures/stored functions/triggers... You need to grant package owner select on view directly.
SY.
Edited by: Solomon Yakobson on Jan 21, 2010 4:06 AM

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

PL/SQL: ORA-00942: table or view does not exist

Hi
i have logged into my schema and trying to access the database "DAD" which has the table name "SCHOOL"
i wrote a function which should give me new_sno when i give it the old_sno
and i have this errors , pls help
CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
RETURN Number IS
NEW_SNO Number:=0;
BEGIN
SELECT new_sno AS NEW_SNO
FROM DAD.SCHOOL
WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
RETURN NEW_SNO;
END ORIG_SN;
Warning: Function created with compilation errors.
Errors for FUNCTION ORIG_SN:
LINE/COL ERROR
5/1 PL/SQL: SQL Statement ignored
6/15 PL/SQL: ORA-00942: table or view does not exist
Thanks in advance ..

Try this,
CREATE VIEW SCHOOL_VIEW AS SELECT * FROM DAD.SCHOOL;and then change your function like
CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
RETURN Number IS
my_new_sno Number:=0;
BEGIN
SELECT new_sno INTO my_new_sno FROM SCHOOL_VIEW WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
RETURN my_new_sno;
END ORIG_SN;and see if it is getting created without any errors.
-Arun
Edited by: Arunkumar Ramamoorthy on Aug 15, 2009 1:56 AM

IBM cognos TM1 Executive viewer is not working on direct Access

Hi,
We are implementing DirectAccess in our environment and testing applications in test lab. It has been observed that executive viewer is not working on Direct Access but working fine over VPN mobile checkpoint. When DA client click on open view button it
gives error
" Additional information:
Unable to connect to server XYZ.com using TCP-IP port 7112. Please make sure that IBM cognos TM1 executive viewer server is started and the port is not blocked by any proxy server or firewall"
but from client telnet is working on port 7112. All ports between DA server and application server are open 3389,7112 and 80.
Also select database option is grayed out and user is unable to select the database. When switching to VPN its working fine.
We are using Executive viewer 9.4.
Any help would be appreciated.

It sounds like this program may not be capable of talking over IPv6, which DirectAccess uses. First make sure that when you connect it is trying to talk to a hostname and not an IPv4 address. If your program is calling for "192.168.1.100" - this is never
going to work over DirectAccess. It must call for a name that DirectAccess can resolve to an IPv6 address for communication over DA.
If you confirm it is talking to a name, and then if you confirm that you can do other things to that same name (can you RDP into the server for example?), then that confirms that DirectAccess traffic flow is working to that name/server.
If RDP works but the application still doesn't work, then the application is probably incapable of IPv6. You can either ask IBM if they have a newer version that does talk IPv6, otherwise I have a utility available that can intercept packets from these kinds
of problematic applications and flip the packets into IPv6 on the DA client. Let me know if you need any further information on that: http://www.ivonetworks.com/news/2013/05/ivo-networks-announces-app46-for-directaccess/

Bc4j view definition not found

Within the doDML method in my PatientImpl class, I have implemented this snippet of code to insert a record into the TransactionLog entity after an insert into the Patient entity.
DBTransaction trans = getDBTransaction();
TransactionLogViewImpl txnLogView =
(TransactionLogViewImpl)trans.createViewObject(
" hmdclinical.customactiondemo.model.bc4j.TransactionLogView ");
TransactionLogViewRowImpl row =
(TransactionLogViewRowImpl) txnLogView.createRow();
row.setAction('TEST');
txnLogView.insertRow(row);
txnLogView.remove();However, the error returned is "JBO-25002: Definition hmdclinical.customactiondemo.model.bc4j.TransactionLogView of type View Definition not found".
What am I doing wrong ? My View object is called TransactionLogView and my business components package is hmdclinical.customactiondemo.model.bc4j ??
Help ?
Also - is it possible to perform the insert and then requery the same row to check for data in other columns on the table had that been populated by a trigger as the result on the insert performed by my business rule code ?? If i make the attribute refresh after update can I do a
row.setAttribute
view.insertRow(row)
row.getAttribute ??
How else would I get the values back from the row just inserted ??
Thanks,
Brent

Please ignore the first part of my question - stupid typo that i always make !
But the second part....
Also - is it possible to perform the insert and then requery the same row to check for data in other columns on the table had that been populated by a trigger as the result on the insert performed by my business rule code ?? If i make the attribute refresh after update can I do a
row.setAttribute
view.insertRow(row)
row.getAttribute ??
How else would I get the values back from the row just inserted ??
Can someone help me with this ?
Thanks,
Brent

Problem creating a view in Administrator: 942: table or view does not exist

Hi and thank you for reading,
I am working with the Administration tool and would like to create a view in the physical layer. However I am getting the following error messages when I try to view the Date in the view:
[NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occured.
[nQSError: 43093] An error occured while processing the EXECUTE PHYSICAL satement.
*[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute.*
[nQSError: 17010] SQL statement preparation failed.
[NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occured.
[nQSError: 43093] An error occured while processing the EXECUTE PHYSICAL satement.
*[nQSError: 17001] Oracle Error code: 936, message: ORA-00936: missing expression at OCI call OCIStmtExecute.*
[nQSError: 17010] SQL statement preparation failed.
I proceed as following:
Right click on a physical schema (this schema is already created and works in Answers) -> new Physical Schema ->Table Type: Select -> Select * from Table_A where name='name' (Table_A is in the physical schema) -> OK -> Save -> Deploy -> Update Row count (works) -> View Data -> Error
Any Idea what I am doing wrong. I have started with an easy select statement to test how to create a view in Oracle Administrator.
Thanks a lot for any help
Evgeny

Do you see Table_A, and in which database schema?
Try to put alias (database user) before table name.
Select * from user.Table_A where name='name'
Where user is database user.
If you have Table_A in another user and connection pool is set to different user, then grant select from Table_A owner to connection pool user (make synonym for Table_A):
Example (I'm using connection pool from userB and have tables from userA and userB).
create or replace public synonym xx for userA.xx
and
grant select on xx to userB
Hope this helps.
Regards,
Goran
http://108obiee.blogspot.com

Database startup showing ORA-00942: table or view does not exist in trace

Hi Friends,
SunOS 5.10 Generic_137112-06 i86pc i386 i86pc , 64 Bit
Oracle 10.2.0.1.0
While I am doing a startup, getting following error.
SQL> startup;
ORACLE instance started.
Total System Global Area 3221225472 bytes
Fixed Size 2122544 bytes
Variable Size 410819792 bytes
Database Buffers 2801795072 bytes
Redo Buffers 6488064 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forcedThe alert log shows the following
Errors in file /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc:
ORA-00942: table or view does not exist
Error 942 happened during db open, shutting down database
USER: terminating instance due to error 942
Instance terminated by USER, pid = 11486
ORA-1092 signalled during: ALTER DATABASE OPEN...A look at the trace file shows this
/applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /applns/oracle
System name: SunOS
Node name: N890
Release: 5.10
Version: Generic_137112-06
Machine: i86pc
Instance name: CTSD1
Redo thread mounted by this instance: 1
Oracle process number: 23
Unix process pid: 11486, image: oracle@N890 (TNS V1-V3)
*** SERVICE NAME:() 2011-02-16 19:24:50.188
*** SESSION ID:(325.3) 2011-02-16 19:24:50.188
Successfully allocated 3 recovery slaves
Using 367 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 45929, block 2, scn 310788795>cache-low rba: logseq 45929, block 3
>on-disk rba: logseq 45929, block 52, scn 310788832
>start recovery at logseq 45929, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 24Kb in 0.31s => 0.08 Mb/sec
Total physical reads: 4096Kb
Longest record: 0Kb, moves: 0/61 (0%)
Longest LWN: 16Kb, moves: 0/3 (0%), moved: 0Mb
Last redo scn: 0x0000.128642df (310788831)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 117/121 = 1.0
*** 2011-02-16 19:24:50.515
KCRA: start recovery claims for 4 data blocks
*** 2011-02-16 19:24:50.515
KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0
*** 2011-02-16 19:24:50.516
Recovery of Online Redo Log: Thread 1 Group 1 Seq 45929 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 121/121 = 1.0
ORA-00942: table or view does not existI have searched MOS and Google, but didn;'t get any relevant results.
Also flushed my shared_pool as mentioned in (http://www.tanelpoder.com/files/oracle_rowcache.pdf) after mount and started , still no luck
Any help is appreciated
Thanks
SSN

Hi,
Thanks.
Tried log mining, but still couldn't find the culprit. I think now, I have to drop and create this db.Still wondering what might have happened.
select group#,status from v$log;
    GROUP# STATUS
         1 INACTIVE
         3 INACTIVE
         2 CURRENT
SQL> select group#,MEMBER from v$logfile where group#=2;
    GROUP#
MEMBER
         2
/applns/oracle/oradata/CTSD1/redo02.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo02.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=1;
    GROUP#
MEMBER
         1
/applns/oracle/oradata/CTSD1/redo01.log
         1
/applns/oracle/oradata/CTSD1/redolog001.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo01.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redolog001.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=3
    GROUP#
MEMBER
         3
/applns/oracle/oradata/CTSD1/redo03.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo03.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.SSN

ERROR ORA-00942: table or view does not exist

Hi:
I created a .sql file and a loader file. Running the .sql file with sql * plus Worksheet:
declare
gr sdo_georaster;
begin
select image into gr from gis.RasterImages where geoid=1 for update;
sdo_geor.generatePyramid(gr,'resampling=NN');
update gis.RasterImages set image=gr where geoid=1;
commit;
end;
I trying to create a pyramid,but the error appeared:
ERROR at line 1:
ORA-29400: DATA CONTROL ERROR ORA-00942: table or view does not exist
ORA-06512: 在 "MDSYS.SDO_GEOR_INT", line 162
ORA-06512: 在 "MDSYS.SDO_GEOR", line 826
ORA-06512: 在 line 5
I don't know why?
Anyone can help me?
Thanks.

Hi,
I think you are executing the select statement for schema X and the table is in the schema srnr.
And schema X is not having select privilege on the table 'students' present in schema srnr.
Goto schema srnr.
Execute the following statement:
grant select on students to X;
This will give schema X the privilege to query the table students present in srnr.
Regards,
Anupama

Help viewer is not helping

Similar Messages

Maybe you are looking for