(Help) Voice Project , CUCM or another?

HI
I´ve never participated of the project with more than 120 extensions, so i need help to what I have to buy, I always worked with CME.
In this project will be 200 extensions, 150 mailboxes, 90 E1 channels, and a softwareto record the calls.
So i think if I could use the Cisco Unified Communication Manager, so :
What server(hardware) i have to buy?
What and How many licenses?
And a software to record calls, hte CUCM do this?
Tks

Hi,
Open case with cisco.com/go/ph and get the required licensing information.
For Recording :- Cisco CUCM supports silent recording feature which allows to record the RTP media from phones. But you need seperate application to make recording work like NICE etc.
You can use MCS or UCS platform for the installation of CUCM application.
You can use sizing tool to find what exact hadrware is requmred and how much
http://tools.cisco.com/cucst/faces/login.jsp
Regards
Ronak Patel
Please rate helpful posts by clicking stars below the answer.

Similar Messages

Need help coping project from one computer to another.

I need help coping project from one computer to another. I loaded all video on computer 1, copied events and project folder to computer 2. I was told I only needed to copy the project folder back to computer 1 since the events folder is already there. I copied project folder back to computer 1 but the files wont open. I dont have computer 2 available.
Please help!!!

Hi
No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
You've got several problems
• iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
• Never MOVE or alter any folder named
iMovie Projects - or -
iMovie Events
on DeskTop/Finder - This might be very harmful
• Moving (Projects) and Events - HAS TO be done within the iMovie Application.
You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
Here You can move within this "window" to another location
• Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
to get this over to the second Mac too, to be able to continue editing.
So to move Your projects to another Mac You need
• iMovie'09 or 11
• an external hard disk -
MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
Should be a FireWire one - as UBS/UBS2 performs badly when used for video
• Then move/copy over within Project resp Events window in iMovie Application
Hopefully I've been not to confusing or badly structured to be followed.
Yours Bengt W

Is there a way to copy & paste a clip from the timeline in one project in to another project?

Hello Popular Premiere Pontificaters,
I am using Premiere 6 on a Windows 7 machine.
Is there a way to copy and paste a clip from the timeline in one project in to another project?... I can copy my clip, but when I open the other project, it will not allow me to paste it in there... but I am able to copy and paste a clip within a single project. I tried everything... pasting in to a new video track and pasting in to an existing video track in the second project, but the paste option simply isn't there when I open the second project.
And if Premiere itself will not allow me to do this in any way, will a copy-paste clipboard type of accessory app allow me to do this?... if so, which is the best, trustworthy copy-paste app that is malware free?
Thanks,
digi

Hi Bill Hunt,
I just read the page that you provided about "Handles"... thanks allot for that ARTICLE. In your article and the subsequent article HANDLES, "Transitions Overview: applying transitions" linked from your article, it indicates (in PrE and PrPro anyway - I'm in Premiere 6) that transitions can be applied to non-Video 1 tracks... the paragraph below is a quote from that "Transitions Overview: applying transitions" article...
"Whatever is below the transition in a Timeline panel appears in the transparent portion of the transition (the portion of the effect that would display frames from the adjacent clip in a two-sided transition). If the clip is on Video 1 or has no clips beneath it, the transparent portions display black. If the clip is on a track above another clip, the lower clip is shown through the transition, making it look like a double-sided transition."
So this indicates that transitions can be applied to non-Video 1 tracks since it is referring to content in tracks beneath a transparent fade that would show through... and only non-Video 1 tracks can be transparent and have other clips "beneath" them in the timeline, right?
In the screenshot sample in your article at this LINK, I see the handles (referred to as B and E) and I can see in my monitor window how those handles would be represented by the two little bracket symbols { } ... you can see how they appear in my monitor window in Premiere 6 in this screenshot, and below, from a different thread that isn't related to this topic.
But I'm still trying to figure out how the handles can be applied in the non-Video 1 tracks in the timeline to insert a transition (cross-dissolve) between two clips.
Can you advise me on this?... I posted a separate thread HERE on this topic, but I haven't got any further with finding an answer.
Thanks so much for your article,
digi

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

Aggregator exe project not opening another project

aggregator exe project not opening another project when published.
The same works fine in HTML.
I tried in Captivate 7 and 8 as well.

I'm having a similar issue. I've used a "home" button to return to the main menu of the course. However, all it does is return me to the last screen I was on. I've tried linking the button to a the aggregator htm and to the swf. Neither gives me the results I want. I currently have it set to open in the current window. However, I get the feeling that it's automatically invoking a bookmarking feature and I'm not getting the pop-up box asking me if I want to return to the last screen or not.

Cannot save PPro CS4 project created on another PC

Another editor told me to delete the pref files but I'm double checking first.
I brought across several projects created with CS3 and CS4 on another PC. All open and eventually load after I find all the media (the projects are > 250 gig. The one I need (always the way, ain't it) will open but not even any of the auto-saved versions will Save. I left it overnight and nada. I click cancel and PPro crashes. What is the solution?
SuperMicro server Motherboard
2 quad xeons
16 gig RAM
Windows 7 Ultimate 64
AVID RTR 320x /UL4D SCSI RAID for media
Quadro FX 3800 video card
All suggestions are welcomed with gratitude.
Peter B

Out of desperation I resurrected a machine that can mount the Matrox RTX2 and will try to open the wretched project with the machine it originated on. When the project tries to load on the Super Micro server box it warns all sorts of what appear to be Matrox plugins and effects are missing so maybe that is the key. I've never seen that little red dot with the X on it before nor the yellow caution sign that precedes it while the media is loading. From now on all projects on the SuperMicro unit will start their lives as AJA format so we can use the $6,000 Braodcast HD monitor I bought in 2008 but haven't actually used for HD other than checking footage from the PDW700 via HD/SDI.
Hope I can open the project because I suspect there will be serious consequences if I do not.
cheers,
Peter Burn
Date: Sat, 24 Apr 2010 19:24:41 -0600
From: [email protected]
To: [email protected]
Subject: Cannot save PPro CS4 project created on another PC
I can only give you the location for PrPro 2.0 on XP-Pro. Sure that there are some changes, but maybe this will get you started: C:\Documents & Settings\[Username]\Application Data\Adobe\Premiere Pro\2.0 and the file is "Adobe Premiere Pro Prefs" w/o an extension. If one "trashes the Prefs," then the Adobe program will just rebuild them with the defaults. There is also a keystroke combo, to use when launching the program. Unfortunately, almost all Adobe programs are different. I think that PrPro is hold down Shift, launch program (while holding down Shift), until it launches fully. For PS it is ShiftCtrlAlt and one gets a dialog screen, asking if one wishes to delete the Preferences - IIRC, PrPro does not have such a dialog.
For the manual trashing of the Prefs, just rename the Prefs file (should be named in a very similar fashion in CS4 and Win7), to say Old-prefs, for backup. Launch CS4, and the Prefs will be re-written.
Good luck,
Hunt
>

Copy FCP Project File to Another Computer - Version of FCP

Hi
I just started using the Media Manager, and it works great for copying RAW footage, and proejct files to another computer.
Just wondering;
In the tests I've conducted, the Project File got copied just fine to a system that contained the same FCP Version (5.1), as the source drive/system.
If I copy Raw Media and a Project File to another system that has version 6, will I be able to re-copy it back into my version; 5.1?
Thanx

Hello and thank you
"You would then need to export an XML file out of FCP6, to work with it in FCP5"
Can this 'XML file' behave like an ordinary edited clip in the timeline? Can it be edited? Or will this 'XML file' be an un-editable movie type file when placed back on the timeline in 5.1?
Know what I mean?

IDVD project locked by another user

Hi all!
I have recently changed the hard drive of my iBook.
All projects were on an external firewire drive.
After installing the system, i tried to reopen one of my project, and get the message (translated from french) :
"Project locked by another user
The project xyz was locked by the user Phil (501) + time and date of the probable last save". It must be refering to the user of my old system.
How do i get to reopen this project?
OK sorry I have found the answer : needed to delete a file called project.lock and i was up and running

Needed to delete a file within the project called "Project.lock"

Trying to edit a project started on another computer and saved onto an external h-drive but keep getting 'general error 48'. Can anyone help?

I am trying to edit a project originally started on another computer, by someone else and saved onto an external h-drive, but keep getting 'general error 48' when I try to render it to work further. Can anyone help?

Oisinbessy wrote:
sorry to be a dufus but is the Final Cut studio forum part of apple support communities?
Here is the forum.
Russ

Please Help - Restore Project on Another Computer

Hi all, I'm having a sudden SNAFU as the workstation (Dell , Windows 7 64 bit) I've been cutting a Premiere Pro CC 2014 project on has become inoperable after an attempted RAM upgrade. Don't ask - I have no idea why it happened.
I have a deadline tomorrow so it's getting a little scary.
I've spent hours talking with Dell Tech Supoprt, and the only solution they came up with was to reinstall Windows or to use System Restore in order to bring the computer back to a workable condition. The trouble is the only options I currently have mean a fresh install of Premiere Pro, and rebuilding the project. Which is a terrifying prospect; I need to be able to resume work on the project. So here are my two questions:
1. Exactly what files do I need in order to rebuild my Premiere project after a fresh install? Obviously the Project File and the Footage/Data - all of which I have. Anything else?
2. If I need to entirely swap computers, I might need to go to a Mac with Premiere Pro already installed on it, and rebuild the project on that. But, will my PC Premiere project file load seamlessly on the Mac? I know it's supposed to, but I have never attempted to do it. I've only used stock Premiere effects - will these port over to the Mac?
Thanks in advance for the help on this, I am running out of time and options here.

You won't need to Restore.
Plug it in and it will ask if you want to sync to this library. Just click yes and it will load your songs from your home computer.
Note that this will remove the music you loaded from your work computer.

Unable to open a project created by another team member in my Captivate 4

I have installed Captivate 4 on two PCs. According to my license I am allowed to install on my home laptop and on my work PC.
I am using Version 4.0.1 Build 1658. I also have all the latest updates as of October 13, 2009.
I am able to develop and publish an instance that runs on my desktop or on the Internet. The problem is when I try to edit an instance on my WORK PC that was created on my HOME PC.
When I click on OPEN and the file name "SampleDemoCourse.cp", Captivate actually goes through the motions of READING PROJECT and the LOADING PROJECT and it displays these actions on the lower left corner of my screen. Then it tells me the PROJECT PATH showing the directory on my hard drive where the file is located.
But it never really opens in Captivate. I cannot do anything after that.
Any ideas, please?
I have uninstalled and reinstalled software many times with help of Adobe Support. I have checked to make sure my preferences are identical.
Thanks,

Hi Drew
Normally it's pretty simple.
1. Copy the .CP file(s) from source computer to intermediate media. (Network server, USB drive, CD, Etc.)
2. Copy .CP file(s) from intermediate media to destination PC.
3. Open Captivate and open file(s) in new location on destination PC.
At no point should you ever consider leaving the .CP file on a network drive and opening Captivate and browsing to the file to make edits while it is in the network location. You always want to work locally.
Another thing to consider is that Captivate seems touchy with CP files. You will want to ensure that all PCs are using the same version of Captivate. This includes patches. I wouldn't want to save a .CP file from a patched version 4 and expect to open it without issues on an unpatched version 4.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Need help with project

Hi all I'm working on a project and need help.
I want the "New" button to clear all the fields.
Any help?
=======================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Message extends JFrame implements ActionListener {
     public Message() {
     super("Write a Message - by Kieran Hannigan");
     setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     setSize(370,270);
     FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
     setLayout(flo);
     //Make the bar
     JMenuBar bar = new JMenuBar();
     //Make "File" on Menu
     JMenu File = new JMenu("File");
     JMenuItem f1 = new JMenuItem("New");
     JMenuItem f2 = new JMenuItem("Open");
     JMenuItem f3 = new JMenuItem("Save");
     JMenuItem f4 = new JMenuItem("Save As");
     JMenuItem f5 = new JMenuItem("Exit");
     File.add(f1);
     File.add(f2);
     File.add(f3);
     File.add(f4);
     File.add(f5);
     bar.add(File);
     //Make "Edit" on menu
     JMenu Edit = new JMenu("Edit");
     JMenuItem e1 = new JMenuItem("Cut");
     JMenuItem e2 = new JMenuItem("Paste");
     JMenuItem e3 = new JMenuItem("Copy");
     JMenuItem e4 = new JMenuItem("Repeat");
     JMenuItem e5 = new JMenuItem("Undo");
     Edit.add(e5);
     Edit.add(e4);
     Edit.add(e1);
     Edit.add(e3);
     Edit.add(e2);
     bar.add(Edit);
     //Make "View" on menu
     JMenu View = new JMenu("View");
     JMenuItem v1 = new JMenuItem("Bold");
     JMenuItem v2 = new JMenuItem("Italic");
     JMenuItem v3 = new JMenuItem("Normal");
     JMenuItem v4 = new JMenuItem("Bold-Italic");
     View.add(v1);
     View.add(v2);
     View.add(v3);
     View.addSeparator();
     View.add(v4);
     bar.add(View);
     //Make "Help" on menu
     JMenu Help = new JMenu("Help");
     JMenuItem h1 = new JMenuItem("Help Online");
     JMenuItem h2 = new JMenuItem("E-mail Programmer");
     Help.add(h1);
     Help.add(h2);
     bar.add(Help);
     setJMenuBar(bar);
     //Make Contents of window.
     //Make "Subject" text field
     JPanel row2 = new JPanel();
     JLabel sublabel = new JLabel("Subject:");
     row2.add(sublabel);
     JTextField text2 = new JTextField("RE:",24);
     row2.add(text2);
     //Make "To" text field
     JPanel row1 = new JPanel();
     JLabel tolabel = new JLabel("To:");
     row1.add(tolabel);
     JTextField text1 = new JTextField(24);
     row1.add(text1);
     //Make "Message" text area
     JPanel row3 = new JPanel();
     JLabel Meslabel = new JLabel("Message:");
     row3.add(Meslabel);
     JTextArea text3 = new JTextArea(6,22);
     messagearea.setLineWrap(true);
     messagearea.setWrapStyleWord(true);
     JScrollPane scroll = new JScrollPane(text3,
                              JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
                              JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
     row3.add(scroll);
     add(row1);
     add(row2);
     add(row3);
     setVisible(true);
     public static void main(String[] arguments) {
     Message Message = new Message();
}

Ok, given that I may have not been the kindest to you on the other thread (and I'm still annoyed that you went and cross-posted this), and that you did actually use code tags, I'm going to post some code here:
Please take the following advice onboard though.
1. When you are naming your artifacts, please use the java coding standard as your guide. So if you are naming a class you use a capital letter first, and use camel case thereafter. All method names begin with a lower case letter, and all variable names begin with a lower case letter (and again camel case after that)
2. Please use self explanitory names (for everything), so no more row1, row2, or text1, text2, etc.
3. The example I am giving below makes use of a single class to handle all actions, this is not really the best way to do this, and a better way would be to have a class to handle each action (that would remove the massive if() else if() in the action handler class.
4. When you are using class variables they should be private (no exceptions, ever!), if you need to access them from other classes use accessors (eclipse and other IDE tools can generate these methods for you in seconds)
5. Notice the naming convention for my constants (final statics), they are all upper case (again from the java coding standards document, which you are going to look for with google right?)
6. I have hived some of the creation work to helper methods (the getSubjectTextField() etc), although it isn't advisable to be calling other methods from the constructor, since this is a GUI, and you want it to appear as soon as you create the class, we won't worry about this, but perhaps as an execrise you could work out a better way to do this?
7. Personally, I don't like classes that implement listeners, unless they are specifically designed to do that job. So a Frame that is set up as an action listener is fine, provided the actions it listens for are associated with the frame, not its contents. If the actions are related to its contents, then a dedicated class is better.
8. Another personal opinion, but I feel it makes code clearer, but others may disagree. If you are creating a variable solely to hold the result of a calculation, to be passed to a method in the very next line, then don't create the variable, just pass the method as the argument to the method (feel free to ignore this advice if the method call is extremely long, and a local would make it easier to read)
Anyway, here is the code. I have removed most of the menu items, and leave this as an exercise for you. Also I have only created 2 methods (new and exit), I'll again leave it as an exercise for you to complete this.
package jdc;
import java.awt.FlowLayout;
import java.awt.event.ActionEvent;
import javax.swing.AbstractAction;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JMenu;
import javax.swing.JMenuBar;
import javax.swing.JMenuItem;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.JTextField;
import javax.swing.ScrollPaneConstants;
public class Message extends JFrame {
    /** Constant for the new action command. */
    private static final String NEW_COMMAND = "New";
    /** Constant for the exit action command. */
    private static final String EXIT_COMMAND = "Exit";
    /** Subject text field. */
    private JTextField subjectTextField;
    /** Recipient text field. */
    private JTextField toTextField;
    /** Message text area. */
    private JTextArea messageTextArea;
    public Message() {
        super("Write a Message - by Kieran Hannigan");
        setSize(370, 270);
        FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
        setLayout(flo);
        setJMenuBar(createMenuBar());
        // Add "Subject" text field
        JPanel subjectRow = new JPanel();
        subjectRow.add(new JLabel("Subject:"));
        subjectRow.add(getSubjectTextField());
        // Add "To" text field
        JPanel toRow = new JPanel();
        toRow.add(new JLabel("To:"));
        toRow.add(getToTextField());
        // Make "Message" text area
        JPanel messageRow = new JPanel();
        JScrollPane scroll = new JScrollPane(getMessageTextArea(), ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,
                ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
        messageRow.add(scroll);
        add(toRow);
        add(subjectRow);
        add(messageRow);
        setVisible(true);
     * Clear all the fields.
    public void createNewMessage() {
        getSubjectTextField().setText("");
        getToTextField().setText("");
        getMessageTextArea().setText("");
     * Exit the application.
    public void exitApplication() {
        if (JOptionPane.showConfirmDialog(this, "Are you sure you would like to exit now?", "Exit",
                JOptionPane.YES_NO_OPTION) == JOptionPane.YES_OPTION) {
            System.exit(0);
     * @return The subject text field, (creates a new one if it doesn't already exist)
    private JTextField getSubjectTextField() {
        if (this.subjectTextField == null) {
            this.subjectTextField = new JTextField("RE:", 24);
        return this.subjectTextField;
     * @return The to text field, (creates a new one if it doesn't already exist)
    private JTextField getToTextField() {
        if (this.toTextField == null) {
            this.toTextField = new JTextField(24);
        return this.toTextField;
     * @return The message text area, (creates a new one if it doesn't already exist
    private JTextArea getMessageTextArea() {
        if (this.messageTextArea == null) {
            this.messageTextArea = new JTextArea(6, 22);
            this.messageTextArea.setLineWrap(true);
            this.messageTextArea.setWrapStyleWord(true);
        return this.messageTextArea;
     * Helper method to create the menu bar.
     * @return Menu bar with all menus and menu items added
    private JMenuBar createMenuBar() {
        JMenuBar bar = new JMenuBar();
        JMenu fileMenu = new JMenu("File");
        fileMenu.add(new JMenuItem(new MenuItemAction(this, NEW_COMMAND)));
        fileMenu.add(new JMenuItem(new MenuItemAction(this, EXIT_COMMAND)));
        bar.add(fileMenu);
        // TODO add all other menu's and menu items here....
        return bar;
     * Private static class to handle all menu item actions.
    private static class MenuItemAction extends AbstractAction {
        /** Instance of the message class. */
        private Message message;
         * @param actionName
        public MenuItemAction(Message messageFrame, String actionName) {
            super(actionName);
            this.message = messageFrame;
         * @see java.awt.event.ActionListener#actionPerformed(java.awt.event.ActionEvent)
        public void actionPerformed(ActionEvent e) {
            if (e.getActionCommand().equals(NEW_COMMAND)) {
                this.message.createNewMessage();
            } else if (e.getActionCommand().equals(EXIT_COMMAND)) {
                this.message.exitApplication();
            // TODO Add the other event handlers here
    public static void main(String[] arguments) {
        Message messageFrame = new Message();
        messageFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}If you have any questions, please let me know, as there are a number of new areas introduced that you may not have come across before.

How do I copy editted clips from one project file to another?

I am working on a project. At one point, before I finished I "saved as" with another name to give me a backup. After working on it for a while I found that a section of the video had gotten out of place (a lot of clips and layers). I would like to copy this portion from the other project file I had saved. I can't figure it out. Both projects have the same clips in the project bins. I am using Premiere 6.5, with a Pinnacle DV500 DVD capture card. My computer is a duel P3 800, 512RAM, 40Gig Sys. drive and 480 Gig RAID 0. Please Help!

Throw away everything you don't want to copy, save as a new project, import the new project into the other one.

Is there a way to import a group of layers in one project in to another project ?

Hi all,
I'm currently using After Effects 5... yes that is version 5, not CS5.
I'm trying to figure out if I can import a group of layers and their applied Effects in to another project while keeping all the editable attributes and the positions of the imported layers with respect to one another.
I see that I can import a AEP project file in to another project via IMPORT FILE, but that just brings the raw layers/files in to the project window and does not place the layers in the timeline with all of their positions, Effects and edited attributes, the way that I'd like.
I also tried Pre-Composing the layers, but that does not leave them editable once a pre-comp has been made... it just makes the 7 layers that I want to import in to another project all one layer and does not leave them editable the way the the 7 layers are separately.
In Adobe Premiere, there is an actual "IMPORT PROJECT" selection under IMPORT that allows me to import an entire project file in to another project and lets me place the imported project where I want in the new project timeline... that is what I'm trying to do in After Effects.
I realize that there may be an easy way to do this in one of the newer versions of After Effects, and one might say, "just buy the new AE CS5", but I figured out allot of things on my own so far and I like After Effects 5 for what I'm doing now... maybe later on the newer version.
Thanks for any input,
digi

Hi Andrew,
No, the two threads that I wrote back to report finding that old 1999 plug-ins package that were removed were...
Cannot find "Caustics" and "Wave World" Effects in After Effects downloads
...origianally at this link, but it is now gone and also missing from my "Discussions" list...
http://forums.adobe.com/thread/959158
and
Is there an underwater effect that can be produced in AE 4.1 ?
...originally at this link, and it is also gone and missing from my "Discussions" page...
http://forums.adobe.com/message/4151249
I had saved the links to those threads with bookmarks, but they were removed the day after I posted about finding those plug-ins.
I wanted to get some info from earlier in the thread on one of those and when I went back they both were gone.
I was able to find those two threads by doing a site-webcach search on Google to see if there was a snapshot of each thread in Google's cache... I did find shapshots of those two thread but they were taken the day that I first posted the questions before any replies or subsequent posts by me were posted. Below are the Google cache links to those snapshots of those threads' pages, but as you'll be able to see, it only shows my original questions before all the replies by you and others on the forum and my final report of finding the plug-ins package...
http://webcache.googleusercontent.com/search?q=cache:S06cU1F1-C4J:forums.adobe.com/thread/ 959158%3Fstart%3D0%26tstart%3D0+site:http://forums.adobe.com/thread/959158&cd=1&hl=en&ct=c lnk&gl=us
http://webcache.googleusercontent.com/search?q=cache:3dtym60qrHcJ:forums.adobe.com/message /4151249+site:forums.adobe.com/message/4151249&cd=1&hl=en&ct=clnk&gl=us
Having the Adobe forums Gestapo remove those threads is a little like burning old software books... meaning, I guess Adobe just doesn't want people discussing old software downloads, even though I did not post the actual link for the the old "AE 6.0 Bonus Plugin Pack" and "AE 5.5 Power Pack Plug-Ins" that I found. I only reported back on those threads that I found the plug-ins packages after several lengthy Google searches. Since those plug-ins packages were no longer available from Adobe, I thought it was quite a find to be able to track them down elsewhere after all this time. They were 12 and 13 year old plug-ins packages, but they had been posted only in the last couple of years.
Someone else on one of those threads had also told me that AE 6 plug-ins would not work in AE 5, but that turned out to not be true... I don't remember who that was... maybe that was the person who removed my threads because he/she didn't like having a thread that indicated that he/she was wrong.
Anyway, thanks for your info again today... very, very helpful.
digi

Help creating project specific ALSB Customization file using WLST

I asked this question in August in another forum and was redirected here, but never followed up. I'm hopeful someone has done this...
Is it possible to create an ALSB CUstomization file for a single project using WLST?
If so, does anyone have an example they would be wiling to share. I've been beating my head against the wall for almost 2 days (well, months now...) , and I'm REALLy starting to get a headache from it now....
We're running WLS 9.2 MP2 and ALSB 2.6 RP1
Any help is greatly appreciated,
Brian

Brian, OSB specific questions are best directed in the SOA Suite forum:
SOA Suite
It looks like there is an ALSBConfigurationMBean with a customize method, but I have not worked with it and it does not sound like that will give you precisely what you want:
http://edocs.bea.com/alsb/docs261/javadoc/com/bea/wli/sb/management/configuration/ALSBConfigurationMBean.html#customize(java.util.List)

(Help) Voice Project , CUCM or another?

Similar Messages

Maybe you are looking for