HELP- volume is suddenly limited

I recently broke the connector that attaches my shuffle to my computer. I bought a non apple replacement. Since then, the volume has been greatly reduced. I have tried resetting my shuffle, used the reset utility, verified that I don't have a limit set to my volume on the settings.....any suggestions out there. Thanks...Mike

GAHHH I JUST HAD THE SAME PROB!!! my connector broke and i bought a connector that wasn't made by apple and the volume reduced! i bought new headphones but the volume is still the same (lowered). heh i just posted another topic on this.

Similar Messages

My iPad volume is suddenly dead, I checked the settings everything is ok there, My iPad volume is suddenly dead, I checked the settings everything is ok there

My iPad volume is suddenly dead even though the settings show everything is ok and on full volume.
Please help....

And you checked the music app to make sure that you have no sound in any app at all, including keyboard clicks, email and app notifications and everything that uses sound on the iPad - correct?
If you have nothing - not sound anywhere - reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you have sound in the music app, but nowhere else, system sounds are muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Help! Numbers suddenly won't open. Shows error -1712. How can I fix?

Help! Numbers suddenly won't open. Shows error -1712. How can I fix?

Read this on error 1712: https://discussions.apple.com/message/20350274#20350274
Sounds like the app is having issues starting. Maybe choking on a file that didn't close correctly?
Suggest going to System Preferences, General, place a check next to "Close windows when quitting the application".
Then follow the direction in the link above. Namely, Force Quit that app and restart the computer.

Please help I am suddenly getting the following on my calendar The server did not recognize your user name or password for account "..." Make sure you enter them correctly. I depend on it for work

Please help I am suddenly getting the following from my calendar The server did not recognize your user name or password for account “...” Make sure you enter them correctly.I have even tried changing the password and no luck. I depend on it syncing with mobile me and my phone and I need it for work.

I have been having the same issue but I think I fixed my problem. In iCal, click iCal, Preferences, Accounts and retype your password. That seems to have done the trick for me as far as I can tell.

Help my Ipod suddenly stopped working 2 min after unplug from car......

Help my Ipod suddenly stopped working 2 min after unplugging it from my scion pioneer ipod ready radio. I am not sure what happened; it was working fine and charged sufficiently and i walked into the gym and tried to turn it on, and no life. I tried plugging it back into my car and it says "i-pod read error". I then tried to plug it into my computer and it doesnt even read it. I may have unplugged it when it said do not disconnect; i am not sure though.Any suggestions? thanks!
Windows XP

I'd say your "Scion Pioneer" radio fried your Mini; could have been a power surge, or could be a bug.
You might want to go the "aux jack" route next time.

PLease help: High Volume database hitting limits

Hi,
I am using Berkeley DB to store real time ticks for market data. To give you an idea of the amount of data...
- I get roughly 15000 ticks/sec on an average
- by the end of the day the database file grows upto 50GB.
My system configuration is...
$ uname -a
Linux gritsbox.rsi.com 2.6.18-92.1.17.el5 #1 SMP Wed Oct 22 04:19:38 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
- Quad core 1.6 Ghz
- 4GB RAM
- I have set the Berkeley db cache to 2GB and I am using the BTREE access method.
I started out using one database to store everything and it works well for 3/4th of the trading day. However, Db:puts increasingly start to take longer and towards the end of the day the delay is so high that I start loosing ticks. I figured that this could be because of BTREE trying to rebalance a heavy tree on every PUT (is this correct?)
I then decided to open 10000 (yeah!!!) databases in the environment, 1 for each symbol(ticker) that i am subscribed to. my idea behind this was that balancing a much smaller tree would be faster for Berkeley DB. However when i run the code, i get a "Db::open: Cannot allocate memory" error after opening just 300 something databases.
Any suggestions would be much appreciated!
thanks
Nishant

Hi Bogdan, thanks for your reply. below is the response to your questions...
1) I havent written code to sort the records. I assume BTREE is storing them sorted.
2) This is a multi-threaded application
3) I have to access the database on demand. Other processes would set the curser to the last value in each database and return its value.
4) the 50GB file is created in my old approach where I was using one database to store everything. today I was trying to open 1 database for each symbol/ticker (so around 10000 databases) that resulted in the "Could not allocate memory" error. In the old approach a new 50GB file was created everyday.
5) This is the only code that writes to the database...
     //Now write the values to DB
     stringstream ss_key_;
     ss_key_ << bsid_ << time_;
     string s_val = "{" + ss_val_.str() + "\"d\":\"d\"}";     //adding a dummy key to take care of the last comma
     Dbt key((char *)ss_key_.str().c_str(), 25);     //BSID + Time
     Dbt value((char *)s_val.c_str(), s_val.length()+1);
     try {
          dbs_[1]->put(NULL, &key, &value, 0);
} catch (DbException &e) {
cout << "Error: " << e.what() << std::endl;
6) u_int32_t envFlags      = DB_CREATE | DB_INIT_MPOOL | DB_INIT_TXN | DB_INIT_LOCK | DB_THREAD;
u_int32_t dbFlags      = DB_CREATE | DB_THREAD;
7) No, I am not managing the cache.
I appreciate you taking the time to help me out.
thanks
Nishant

Help! Keyboard suddenly not working

im back from school trip and when i turn on my computer, suddenly part of my macbook pro's keyboard isnt working...
the not working keys: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, +/=
Q, W, E, R, T, Y, U, I, O
I need to use my laptop at school and its not possible for me to carry an external keyboard around, plz help!
Note: things started to get weird after I open Far Cry 2, i dunno if its related, but after i open it, the number keys stopped working too. Also I am using windows, but its the same problem on mac as I already checked

Last =night =mine =started =acting =up =too. =as =you =can =see =the =space =bar =gives =me =an =equal =sign. =The =delete =key =works =but =also =turns =up =the =volume. =various =other =keys =seem =to =be =linked.

URGENT PLEASE HELP - Source determination in Limits Carts not working

Dear all,
We have implemented SRM 4 on Server 5.0 and ECC 5 backend.
We have in our environment service masters that have been catalogued and linked to Contracts. When one raises a cart and selects one on these catalogue service items, a backend PO correctly creates and references the contract as specified in the catalog.
The problem we have discovered that if we raise a Limits order and specify the material group stipulated in the contract for a service, source determination fails to "pick up" this contract line. We are forced to enter a supplier all the time!
Also if we raise a text service line and select from "internal Goods/Services" a Service Master record and add it tothe cart, surce determination also does not pick up the R3 contract/line that matched this service. This means that when POs are created in the backend, they are not referencing any contract (no call-off)
Why is this happening? How come catalogue items linked to a service masters and contracts work and correctly and a Limits order do not?
Please help, we need to resolve this issue today.
Thanks,
Grace.

Hi Grace,
The contracts that are created in SRM can only be refered as Source of supplies while creating shopping carts if your are working in Extended Classic scenario.
In case you want to refer the back end contracts, Info. records for creating shopping carts you have to implement classic scenario.
The standard SRM does not provide the functionality you needed where as if you want to use back end contracts for a particular product category you can implement "Controlled Extended Classic Scenario BADI " which makes the classic scenario active for that product category, there by a back end contract can be referred for that product category when ever a shopping cart is made.
Hope this makes you clear. Clarifications are welcome.
Award points for suitable replies.
Rgds,
Teja

Volume increases suddenly during the playing *.mkv file in VLC player

I watched video in *.mkv by using VLC, when video has reached particular moment, the volume (not in VLC) increased from ~20% to ~75%.
This is not VLC's volume, I don't know how to name it correctly, it's volume that I see when I wrote "alsamixer" in terminal.
I replay this video again, and in the same moment, the same thing with volume occurred.
How to avoid it?
At least, I'd like to set some "maximum", because when volume sets to 75% it's become terrible loud.
Last edited by lightgreenpanda (2012-04-01 14:17:35)

x33a wrote:
Test the file using mplayer2. What type of video are you watching? If it's having ordered chapters, then vlc doesn't support ordered chapter properly.
ps: it should be .mkv instead of .mvk
I've just tested this file in gnome-media player, this problem didn't occurred (!). So, it seems like VLC problem.
The video doesn't have chapters. This file is 3rd series of some tv-show. The previous two was ok (without volume problem).
DSpider wrote:
Ah, volume normalization. Yes.
MKV's (not ".mvk"), or "HD" movies usually have moments when explosions or gun shots are amped up. This is a cinematic effect, best felt with a proper audio system. Go to Preferences - Audio - Effects - Normalize volume to ... some_value (depending how flat you want it). I usually use SMPlayer with Right click - Audio - Filters - Volume normalization.
I did this settings, but it didn't help.
Also, I've tried to replay this video a few times, and found that volume increases in random moment, usually in the beginning. VLC's volume was still the same.
ps: Sorry about wrong format, i've changed it to .mkv
Last edited by lightgreenpanda (2012-04-01 14:44:18)

Can you please help solve my sudden problem saving photos in version sets?

Saving edited photos in Version Set
Ever since I have owned the excellent Adobe Photoshop Elements 4.0, I have saved edited photos in a version set with the original. Now, in spite of the 'save in Version Set' box being ticked, they are saved separately. When the edited photo is saved, it says 'imported from hard disk'. It has never said this before.
When the photos are imported from the camera, they are saved in Adobe/Digital Camera Photos/code provided by photoshop (eg 2006-03-10-1632-38). Under properties/history it says imported from Panasonic DMZ-TZ3. This has not changed. All the saving arrangements appear to be unchanged.
Photos (thousands!) have been successfully edited and saved in a Version Set. Under properties/history it says 'edited version' and 'imported from Panasonic DMZ-TZ3'.
Suddenly, photos that have been edited and should have been saved in a version set, now say under properties/history nothing about being edited. They say 'imported from hard disk'. In other words they are being treated as a new photo.
I really hope you can help me to solve this infuriating problem. Please ask if you need more information.
I work on a PC with Windows XP
Michael

Michael: are you still using an old version o0f PSE (e.g. PSE V4)? Problems similar to the one that you described are relatively frequent in old PSE Versions ( I was suffering a lot from them)..... and there are quite seldom in newer PSE versions. Unfortunately, I do not remember which PSE Version became much better in this area (was it V5? or V6?)
If using an older PSE version and encoutering often the problem: consider to migrate to a newer PSE Version..

Help - Hyper-V suddenly can't connect to network

hi there,
need help please. we just installed Hyper-v 2008 R2 on Host with Windows 2008 R2 enterprise.
first time is ok, VM can connect to real network, and other PC in the same network can connect to this VM.
but now, suddenly the VM can't communicate to each other on same network, and others can't detect the VM.
try to diagnose the network, still no effect.
any advice please?
also, when we add network card as a virtual network, the system will create another virtual private network. what is the best practice to configure this one (a real network card, and its virtual private network card)?
thanks in advance

problem occurs from the driver. reinstall the driver and ..done.thanks

*Look Up Help and the function limitations

Hi Experts,
I have been working on the look up function in my script logic and faced with certain issues. To give you an insight into the requirements, We have a list of products in 'product' dimension and whose raw material prices are maintained in another application called "Norms".
As there are 10 different and unique norms, the current design is to maintain each product's raw materials as 'properties' of the product dimension. We are now doing a look up at the "Norms" application with 10 look up ids in a single look up statement to multiply raw material prices with production quantities planned.
The script logic is successfully validated ( for testing used only 5 look up ids). However, the end result in the cube is populated only for 3 instances. All the look up ids after 3rd instance is ignored. Is this the look up function limitation in BPC? We are on NW 7.0 SP 06. Please find the logic below.
Kindly suggest if indeed it is look up function limitation or not? Also kindly suggest if there is an alternative way of acheiving this as in our case our look ups are restricted to 10 only.
*LOOKUP Norms
*DIM AAA:PRODUCT="MR1"
*DIM BBB:PRODUCT="MR2"
*DIM CCC:PRODUCT="MR3"
*DIM DDD:PRODUCT="MR4"
*DIM EEE:PRODUCT="MR5"
*DIM TIME="2011.APR"
*DIM CATEGORY="ACTUAL"
*DIM MEASURES="PERIODIC"
*ENDLOOKUP
*WHEN PRODUCT.RAW_MAT1
*IS "MR1"
*REC(EXPRESSION=%VALUE%*LOOKUP(AAA), P_ACCT="G4000000")
*ENDWHEN
*COMMIT
*WHEN PRODUCT.RAW_MAT2
*IS "MR2"
*REC(EXPRESSION=%VALUE%*LOOKUP(BBB), P_ACCT="G4000000")
*ENDWHEN
*COMMIT
*WHEN PRODUCT.RAW_MAT3
*IS "MR3"
*REC(EXPRESSION=%VALUE%*LOOKUP(CCC), P_ACCT="G4000000")
*ENDWHEN
*COMMIT
*WHEN PRODUCT.RAW_MAT4
*IS "MR4"
*REC(EXPRESSION=%VALUE%*LOOKUP(DDD), P_ACCT="G4000000")
*ENDWHEN
*COMMIT
*WHEN PRODUCT.RAW_MAT5
*IS "MR5"
*REC(EXPRESSION=%VALUE%*LOOKUP(EEE), P_ACCT="G4000000")
*ENDWHEN
*COMMIT
Thanks,
Santosh

Hi All,
Any help here. I am sure this would be a very common scenario wherein to compute certain accounts, the reference data is stored in a different application.
Here we are trying to calculate raw material cost based on sales quantity budgeted. Each product's rawmaterials are maintained as properties against the product. The code has to look for matching raw material IDs in the look up application and calculate the raw material cost.
The above code is validated. But not seeing the complete results upon execution. Please suggest if there are any errors.
Thanks,
Santosh

IMac- External Bose speaker volume is suddenly low

I can't figure out what happened between yesterday and today but suddenly my speaker volume is really low. I've read the forums and tried some different things but I can't seem to get the volume that I normally have... disturbing. Any thoughts?

Not a hardware/sofward issue, user error. Someone used the volume slider bar on the Spotify app. Didn't even know that existed but issue resolved.

HELP! - framesets suddenly stopped working

Hello,
I am a dreamweaver novice. I built a site using framesets,
and had them working so that when I clicked a button in a
leftframeset, a linked swf file would open in the mainframe. It had
been working fine for months, but suddenly stopped working. Now
everytime I press the button it tries to open a new window which is
a pain and takes more time. I checked the link settings in the
button in the left frame that opens the swf, and its still corect
(still says it is targeting the main frameset) ... any ideas?
thank you

Bob,
I thought of this after I responded to your email....
when you assigned the link to that button, did you set the
target via the
property inspector?
If so, did you set it to go to the mainframe ? or is it set
to go to
target_blank
(which would spawn a new window).
PS: That code doesn't really help.... People would need to
see all the
code that makes up that particular page.. not just the script
for the flash.
Nadia
Adobe� Community Expert : Dreamweaver
http://www.DreamweaverResources.com
- CSS Templates|Tutorials
http://www.csstemplates.com.au
http://www.perrelink.com.au
- Web Dev
http://www.adobe.com/devnet/dreamweaver/css.html
CSS Tutorials for Dreamweaver
> BELOW IS THE CODE FOR THE DREAMWEAVER BUTTON, USED IN
THE LEFTFRAME OF A
> FRAMESET, THAT IS INTENDED TO OPEN AN SWF IN THE
MAINFRAME OF THE FRAMESET
> ...
> BUT WHICH (NOW, SUDDENLY, AFTER WORKING FINE FOR MONTHS)
OPENS A WHOLE NEW
> BROWSER WINDOW INSTEAD.
>
> ANY IDEAS ALL?
>
> THANK YOU,
>
> BOB
>
>
> <script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=5,0,0,0','width','105','height','23','title','Shelf
>
Assesor','src','button75','quality','high','pluginspage','
http://www.macromedia.
>
com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash','bgcolor','','m
> ovie','button75' ); //end AC code
> </script>
> <noscript>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=5,0,0,0" width="105" height="23" title="Shelf
Assesor">
> <param name="BGCOLOR" value="" />
> <param name="movie" value="button75.swf" />
> <param name="quality" value="high" />
> <embed src="button75.swf" quality="high"
> pluginspage="
http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Vers
> ion=ShockwaveFlash" type="application/x-shockwave-flash"
width="105"
> height="23" ></embed>
> </object>
> </noscript>
>

Bass volume varies suddenly

Since I bought my HP laptop (LT A8-6410), I have been experiencing problems with the sound output while listening to music. The music volume, especially the bass, varies every now and then while listening to music. I have tried listening with headphones as well and I was experiencing the same problem, so it is not due to speakers.
The varying of the sound volume takes place couple times in a minute.
What can I do? I bought the laptop only a couple of months ago and have had this problem since beginning. I have also taken my laptop to the seller for maintenance and they changed the motherboard, but it didn't fix the problem.
Thanks for the tips!
Regards,
T

Hi @turkale
I understand that you are having a problem with your sound. I will be happy to help. What is your product number? Have you tried the built-in Windows troubleshooter mentioned in this HP document No Sound from Speakers?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HELP- volume is suddenly limited

Similar Messages

Maybe you are looking for