Help!!! Volume keeps dropping on some audio tracks,

Hi im running logic studio, Recently got ALesis DM5 and EZdrummer.
Now when i play a song in Logic or even record Volume on certain tracks just seem to drop,i move fader back up and it drops again. I am not using automation on any of theses tracks.Its doing my head in.Even unplugged midi cables to see but still going.
Any ideas guys as its doing my head in.

Hi Guys,
I started writing a "thanks but i dont understand" post but now i think i have got you:
I opened Hyper Editor and double clicked on the volume track & i saw the number 7 checked in the "convert" box so i unchecked it, pressed "convert" and all is fine so far
thank you so much guys, you have no idea - i am one of 2 logic users that make house on this tiny rock in the caribbean & without this forum i wd be so behind - i truly appreciate you
caynick

Similar Messages

Some audio tracks bumped out of sync

I recently discovered that some audio tracks have been bumped out of sync starting at one point in my timeline, and there doesn't seem to be any consistency to it–stereo tracks have shifted so that one track starts early while the other is in sync, others start together but have been bumped, while all of the video seems to be correctly placed, and some audio is still in sync. This has happened on various audio tracks and with varying degrees. Any clues on how could this have happened? Could it be from insert edits? I use them all the time and never had any problems like this before. Please help!

This can easily happen if you audio and video tracks are not linked. (Apple L toggles linking on and off) When they are linked it's difficult to inadvertently bump the picture or audio track out of sync.
As for the stereo tracks. The only way to bump them out of sync is if they were, at some point, not stereo tracks. (Option L toggles stereo) And even that should rectify itself when they get made into stereo tracks again.
I say "should" because I've had stereo tracks of unequal lengths show up a few times and have never been able to figure out how it happened. I do know that if you don't fix them they can play havoc with the audio if you export the sequence to QT.
rh

How can I keep one of my audio tracks stationary when syncing multiple tracks?

I am trying to edit a video that has external audio from an H4N recorder and internal audio from 2 Canon DSLRs. The internal audio is just there to help my sync everything and will be muted during output. From the H4N I have one long, continuous recording, but from the cameras I have shorter clips, not all of which happened exactly after the previous one.
Here's the issue I'm having: when I sync the two video clips & the external audio early in the timeline, everything lines up (using the automatic synchronization based on waveform). However, when I am syncing clips later in the timeline, sometimes Premiere chooses to pull the external audio track FORWARD (thus bringing it out of alignment with the earlier video), rather than pushing the video tracks BACK (which is what I need).
Is there some way to tell Premiere which tracks should and should not be moved during sync? If I lock the track, then I cannot use the sync function on it at all. I basically need a way to specify that one track should be used as the "anchor" and that others should be moved forward or backward as needed, without moving the "anchor" track.

Cut up the 4n audio clip and synch it to its respective clips.

Music volume keeps dropping on my iPhone 6 when using both headphones and AirPlay

when playing music on my iPhone 6, sometimes the volume will drop for reason at all. Fortunately it doesn't happen too often, but when I'm driving and it dones happen, I can bearly hear it. It corrects itself completely at random too. Please help, it's an annoying problem.

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

Help importing WMV files with 4 audio tracks....

Hello,
I am using a PC to run a robot show. The show runs off of WMV files recorded with 4 audio tracks.
The "front" audio tracks are the left and right chanels for sound.
The "rear" audio tracks are the signals the show runs off of.
(If you want to see the show... it's here http://www.yorkmiss.com/Curtains.wmv
I run the audio files using the windows media player and as you can see... it works fine.
However, I would like to use the I-tunes player since I can then controld the show remotely using my I-Touch.
The problem is that every time I import one of the audio file into I-tunes, it converts it to a new type of file that "blends" the front and rear chanels of audio together.
I've tried every different option in the import prefrences list - and they all have the same result.
Does anyone know a way of playing the files "as-is" without converting them, or is there a way of converting them I do not know about?
Here's an example of one of the files:
http://www.yorkmiss.com/ShowbizKylesmom_504.wma
Any help or suggestions would be welcome and appreciated!
Thanks in advance,
Beth

Yes, I understand that now... but is there a way to convert to those file types while still preserving the 4 seperate audio chanels?
Thanks, Beth

CS4 What stops audio from being moved to some audio tracks?

I find in some cases a snippet of audio that would fit easily into what at least appears to be empty track above it, will not go there. Instead what looks something like the little magnet icons... (only verticle) .. appears at the cursor and the audio will not be moved up.
I'm trying to conserve tracks a bit since I've hogged up 5 audio and 3 video. I don't like having some stuff out of site while editing if possible nor do I like making the stuff above the timeline so tiny or buried. I'd like to use what appears to be empty audio track where possible
Is there a setting the will allow me to move audio as I please?

Ahh, that it explains it then... thanks
Harry,
Those Audio Track type/Audio file type mis-matches have tripped up many.
Management of Tracks, both Video and Audio, can be a bit of alchemy, and a bit of art. One can do a lot about locating them, but one feature that PrPro does not yet have is Track dragging.
There is a thread from about 6 mos. back that goes into some of the details of Track management. Throughout that thread, there are complaints about no Track-dragging, but if you ignore those, one can get the step-by-step on doing it "the PrPro way." If I can find it, I'll link to it.
Good luck,
Hunt

Missing Some Audio Tracks from Premeire Queue'd videos

Hi I am useing Premeire CC 2014 to Queue some videos that have 4-8 tracks of audio. They play fine in Premeire. When I Queue the clips in AME CC 2014 and then render them with a H264 codec transcode, I am only getting the last track (Music) in the outputted video. I am missing the voice over tracks.
Not sure why this is happening? Any suggestions. I am using the Audio Track Mixer with Submixes and effects on the Submix in Premiere. Perhaps there is an issue with this.
Thanks
DB

It can be done with QuickTime Pro
<http://store.apple.com/us/product/D3380Z/A>
"Show Movie Properties" in "Window" menu, detete the unwanted track, then "Save" in "File" menu.
You may need to install Perian
<http://www.perian.org>

[Help !]Exporting more than 2 audio tracks impossible ?

Hi all,
I am trying to export a sequence with 6 audio tracks using *Menu->File->Export->Using Quicktime conversion...* and it seems to be impossible to export to more than 2 audio tracks !
If I use the option Export->Quicktime movie I can export my 6 audio tracks but I don't want to export to .mov file...
Can anyone confirm or has a solution ?
Thanks in advance.
Tom Douce

Nope, Red is correct on this Tom, unless I'm misunderstanding your question. Regardless of your audio hardware, to export more than 2 channels of audio you must define those extra channels by creating additional "audio outputs" for your sequence ... basically the number of audio channels in your export is equal to the number of audio outputs in your sequence settings; additionally you must map the audio tracks in your sequence to those audio outputs ... you do that by right clicking on or around the audio track lock icon / auto select icon for each channel and using the context menu to assign the track to a given output (you can also do this in the Audio Mixer toolbench window). This is the workflow regardless of whether you are exporting to a file or exporting to tape or otherwise.
For what its worth tho, in my own quick hardly conclusive tests earlier on, exporting a correctly configured multichannel sequence "Using Quicktime Conversion" always resulted in a stereo downmix being passed to the chosen export component, so I still think you're likely to end up needing to use the private export component API to get around this.
Hope I'm wrong tho, as it would surely make life a lot easier for you
Best
Andy

No sound from some audio tracks ... help!

I am using GB 08 to add music to a movie for a friend's memorial. ( A keynote presentation exported as a QT movie)The Movie itself has no audio, I want to use a variety of songs that blend into each other.
I'm used to doing this with Final Cut, but decided that i should familiarize myself with Garage band this time.
I just added the 10th track and now can't get some of the other tracks to play. It's weird.
Tracks 2, 4, 6, 7, 8, 10 play, but 1, 3, 5, and 8 don't.
(i suppose i could just split the odd tracks and move the sections to the tracks that play, but that wouldn't really give me an answer for this)
I have volume level keypoints where the volume rises and drops, and this action does happen on the volume sliders, and the green levels are visible, but no sound.
None of the tracks are muted or soloed.
Any suggestions for correcting this?
I've closed the program and restarted it and one time everything was fine, until I added that 10th track
thanks for your help
Elizabeth

Okay, thank you, I just tried it
I added a new basic track, it was not muted or soloed.
So i dragged my audio into this new track and it played fine
then i deleted this track and just simply dragged my audio into the composition, as I have been doing, to create it's own new track, which then also played fine, then I deleted this one.
then i added 2 basic tracks (since the problem seems to be with alternating tracks) and dragged music into them and they both work.
so I don't know how to make the problem recur with the new tracks, but the original tracks that I wrote of, still don't play.
Anyway, I've saved it as a version b and have been cutting and pasting the bits of the 'silent' tracks into the good tracks so that they play .... looks a bit like a mosaic but is working so far.
very inconvenient though.
Any more suggestions??

*HELP* Some audio tracks I just downloaded from the iTunes store don't play all the way through, they stop in the middle!!

*HELP* It's like they didn't download right, why are the tracks not playing?? I might have been transferring my music library to an external hardrive at the same time, would that affect the files downloading properly? (but I'm pretty sure I did that after the tracks were done downloading). Can anyone help???

http://http://support.apple.com/kb/index?page=search&src=support_site.kbase.sear ch.searchresults_suggested.search&product=&q=itunes%20download%20wont%20play
Maybe you can find something here, you can also call Apple Support, or try online support.

JERRY HELP laptop keeps dropping wifi signal, very slow computer

I have read some blogs here where Jerry Lippey? has helped. PLEASE HELP!! My c655d-s5200 satellite laptop constantly drops the wifi connection. just in the registration for this site alone i had to reconnect about 10 times. computer is only about 1 year old. computer has always been very slow, even from day 1. taking sometimes a full minute or two to change pages. I never complained about it when it was under warranty. I just lived with it. and now that it just out of warranty, I have changed from mediacom cable to us cellular wifi, I am finding out that I have more problems than I thought. I have a good 4G singal and I am almost 100% sure it is not a problem with the hotspot. it seems my computer takes way to long thinking. even from day 1 sometimes it will not print a letter that I know I typed. It has most of the same problems as the person on a ship overseas did in another blog. If you havnt figured out yet I am NOT familiar with the computer. or tech terms. I am one of the dumbest ones on here. I tried to search and identify my wifi information by typing (pc diag ) in the search bar and no results came up. As I was going to try and redownload the driver. I still have the windows 7 that was originally loaded. I also have NO dates set to restore to. can someone please help me out. I am very disapointed with this toshiba computer. PS it just took over 40 seconds to back space and delete a full sentence I decided not to say.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Audigy 2 Sound volume keeps dropping to 0 by itself

? I have an Audigy 2 (Dell OEM) card, running on XP SP3 in a Dell XPS 630i PC. I'm using daniel_k support pack 3.6. 5. analog speakers (Altec Lansing ADA 995)
Everything has been working well,?until in the past few days, after some time, the volume drops to 0 by itself. Resetting it in the volume control in systray or in surround mixer, it may stay at the chosen setting for a while, then drops back to 0. I have not been able to associate the problem with any particular window being open, or sound being used in e.g. playing music. Diagnostics passes all tests when the volume is not 0)
Although I can't measure the temperature of the Audigy card itself, I don't think there is overheating, as the rear (exhaust) temperature is 35C, according to Nvidia system monitor. Other temps (CPU, GPU, hard dri'ves are also normal.
Advice on the cause would be welcome.

? No, no hibernation and no standby during?hours of use (I don't use a screen saver but close down the PC every night and restart it in the morning). Also no logging in or out, mine is the only account and I auto log in to Windows.
Also no DDL or DTS installed (I uninstalled DDL and DTS that were installed by?Daniel_k's package immediately as I have no use for them).
I have noticed a possible correlation with sudden sounds, such as apps with sound effects (e.g. solitaire type time wasters that I indulge in) or?telephone line ringing from my fax modem, (but according to dxdiag?that uses modem#0?line playback (emulated) and not SB Audigy 2?[EE0]?when the phone rings). It doesn't seem to happen if I'm just using WMP to play music or using an app that has no particular sound effects.
All direct sound?tests pass in dxdiag.
I do hope it's not the card going. I've had it in various PCs since 2003.

Help, Broadband keeps dropping!

Hi there, me and my family have been having this issue for many weeks now, i feel like ive tried everything - nothing works. As you can see above this is an example of what were dealing with - i can confirm this is a periodic drop as there was another drop shortly after, although strangely a fifth one didnt happen for 25 minutes. This all started happening from the moment it was reset (with pin to the back).
I am using BT home Hub 4, I have called BTs mumbai office soo many times, the closest I came to solving this was changing the wireless channel - this still didnt work. We have many devices connected to the hub - tablets computer phones.
At the time of the drops:
2.4 GHz Wireless:
Sue-pc
00:1c:26:86:56:ac
192.168.1.68
LawrencesiPhone
dc:86:d8:7f:dd:1a
192.168.1.66
Andys-iPad
3c:e0:72:0e:f0:6b
192.168.1.67
Lawrences-Mini
6c:40:08:98:c4:92
192.168.1.71
5 GHz Wireless:
COM-MID1
60:02:b4:ae:9c:eb
192.168.1.83
Ethernet:
No devices detected
USB:
No devices detected
In terms of what colour the hub turns when dropping - i believe it flashes orange although not 100% certain.
I even resorted to buying a new router - this didnt make it past the automatic setup phase. It kept telling me to i need to turn off the modem - which as far as I know I dont have!
Im really really coming to the end of my tether with this, please someone help! If you need any more information ill do my best. Thanks.

From the information posted all the devices are connected wireless. I would turn off smart wireless and select the channels manually. I would also split the 2.4 and 5ghz networks by say adding a 5 to 5ghz channel and uou can use same password fir both. Many devices don't like the 2 networks combineD
you can also use inssider to chrck free channels.
you can try downloading inssider3 (istumbler if MAC) and then run it. This will show the broadcasting networks round about you and their channels including your own. If you then enter your router and change your wireless channel to a free or less congested channel.
inssider3.1.2.1
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Does anyone know how to separate a movie track from an audio track on the new Mavericks Garage band. It used to be very easy on the iLife 11 version. If anyone could respond ASAP I'd be grateful. I need to make an audio file from a video.

I urgently need to make some audio tracks from videos using the new 2013 GarageBand. In iLife11 Garageband, this was very easy. However, I cannot see how to do it in the new one. The alternative might be to revert to the iLife11 version, so does anyone know how to do this. It's extremely urgent since I need to produce these for a court custody hearing which will take place at 0800 GMT UK time on 31st October 2013. Please help.
Thank you.

When you drag a movie from the Media Browser to the Time lIne in GarageBand, you will see a pop-up "Extracting Audio".
The Movie and the audio file will appear in separate tracks. You can copy the audio region from the sound track to a different track to keep it safe and then hide the Movie track.
Léonie

Different Audio Tracks when you import DVD VOB Files

I imported some vob files from a dvd and it only gives me the first audio track in premiere but i need the 2nd audio track. How do i tell premiere i only want the 2nd track?

function(){return A.apply(null,[this].concat($A(arguments)))}
Colin Brougham wrote:
... would like to know for the future how to resolve this issue.
If there is no way to get the 2nd audio track then i would consider that to be a bug that hopefully Adobe can fix in next patch.
Ideally when you import a vob fileset premiere should automatically drop all the audio tracks into the timeline, not just the first one.
Don't use a DVD, plain and simple. The fact that we can edit this stuff at all is just a handy shortcut that works most of the time. I suspect that, given the nature of the material and the far greater precedence for native editing of professional camera sources, this is about as good as its going to get. You can certainly report it as a bug (which its not) or request it as a feature, but I sincerely doubt that this would be given a great deal of priority.
I'm not saying this just to be a jerky naysayer: the fact is that there is limited time and resources that go into development of each point release and each full version, and the things that benefit the most people have the greater likelihood of being fixed or included. I'd be surprised if even 1% of Premiere users needed this functionality. Believe me--I've wanted dozens of things that I know won't ever make it into the program, simply because they won't benefit many people. But make a feature request and see what happens...
wow?? what a terrible, mean, and unnecessary negative response? "jerky naysayer" ?? never heard that term, but it sounds accurate.
Thats like walking up to someone and saying "i dont mean to be cruel, but your fat and ugly"
anyways, not sure what your point is, other than you have a crystal ball that tells you less than 1% of the premiere users in the world ever need to grab a b-roll from a dvd and i think i could find plenty of people who would disagree with you. I have been doing digital video editing for 20 years and been using premiere for about 15 years now i think since it first came out. I work at a tv station with lots of other video editors and we have all needed to pull a clips off dvd's many times in our lives. Im sorry that i dont have an XDCAM HD video tape of the first moon launch to capture, so for now i have to grab a clip from a dvd.
Thanks for your attempted "help" but i'd rather you not hiijack my thread by negating my questions and requests. My company has purchased probably over a million dollars in adobe software licenses over the years and there is nothing wrong with my opinions and requests.
thanks

Help!!! Volume keeps dropping on some audio tracks,

Similar Messages

Maybe you are looking for