HELP WEBDB/Oracle 8i/LINUX!!

Hello,
I've managed to get past the pass.sys bug on webdb installation.
Webdb is now giving me this error.
wwv20.vrf(119): READ_ERROR while translating tablesp from
/usr/local/oracle/webdb/orainst/tablespaces.lst.
; /usr/local/oracle/webdb is where i'm installing it to. There is
no such file there. Also Oracle8i is installed properly and
working fine. The installation docs specifically said not to
install webdb into 8i's path. What needs to be done in order to
get this running? Help..
Thanks.
ishan
null

Ishan (guest) wrote:
: Hello,
: I've managed to get past the pass.sys bug on webdb
installation.
: Webdb is now giving me this error.
: wwv20.vrf(119): READ_ERROR while translating tablesp from
: /usr/local/oracle/webdb/orainst/tablespaces.lst.
: ; /usr/local/oracle/webdb is where i'm installing it to. There
is
: no such file there. Also Oracle8i is installed properly and
: working fine. The installation docs specifically said not to
: install webdb into 8i's path. What needs to be done in order to
: get this running? Help..
: Thanks.
: ishan
I've managed to install WebDB, but it doesn't work perfectly yet,
I still have to find out the problem. Here's how I did :
Go to the support directory, and read the file maninst.htm (for a
manual install). I followed the instructions, and all has worked
well, except for the command to launch the web listener, that is
'wdblsnr host port start
The only problem left now is that once logged in to the webdb, I
can't log out, even if I restart the whole database. When I'll
have found the problem (maybe by destroying/recreating the
database and repopulating it with the WebDB sql files), I'll let
you know, but if someone has an answer, well, let me know ;)
cyaz, and I hope this'll help
Tiam
null

Similar Messages

Oracle on Linux Help Wanted

Hello,
I am trying to install Oracle 8.0.5 on Red Hat Linux 6.0 and i
have refered to some of the documentation on installing oracle
and i have also got some direaction from internet for how to
install oracle on linux only thing i was wondering about is that
how can i get the patch glibcpatch.tgz b/c in one of the
installation steps it say that to install oracle server on linux
6.0 it need this patch but i dont know from where i can download
this patch so if any one know please reply back it would be a
great help i am trying to installing it on Dell 6300 server with
Red Hat linux 6.0 on it.
Suggestions and Commets and any major issues to be taken care
while installation or before installation are welcomed..
My E-mail id is [email protected]
Thanks,
Kaushal Patel
null

Hi,
- Do you install Oracle VM Server (OVS) on an emulated environment like Oracle VM VirtualBox ? if yes so you can't do it.
- Don't forget to configure the Virtual Machines Network and also to add this network to this Virtual Machine.
I hope this can help you
Best Regards

Problems dual booting Windows Vista with Oracle Enterprise Linux 4

I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
Initializing hardware....Storage network"
It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?

hi,
r u getting this error while installing oel or after installation?
which version of oel u r installing?
u may get this error probably due to hard disk (usually sata) compatility with linux.
--Regards
Xaheer

Question regarding Oracle and Linux on VMware

Hello,
I carefuly read the paper on Oracle and Linux on Your Own VMware and I'm missing a point.
The paper explains how to start a cluster on a single host in a single Linux VM on VMware.
So, there are 2 instances of Oracle 10g DB on the same Linux VM inside VMware. What does allow that?
Is it possible to run 2 instances on any (single) Linux box, or is VMware required? If VMware is not required, why this complication in that paper? If VMware is required, what does it bring that make running 2 cluster instances on the same host possible?
Many thanks for your help.

userLynx wrote:
I have an oracle database (10.2) and I have a query that needs to compare data on the Oracle database to data on a MS SQL server DB. I'm using a DB Link between the two databases.
How would I compare the date fields?
I have a table that has a date as one of the fields and I need to restrict the records where the date is equal to the date on SQL, however the formats are different:
My query is as follows:
SELECT mkt_css_name,
pmv_rqst_corp_id,
pmv_rqst_source,
'G',
pmv_css_acct_no,
eq.start_date
FROM power_move@cmdt,
enroll_que@tcis eq,
marketer@cmdt
WHERE eq.css_account_number = pmv_css_acct_no
AND eq.requestor_type = 'P'
AND eq.status IN ('A','P','G','S')
AND eq.marketer_id = mkt_seq_no
AND pmv_service_type IN ('G','D')
And Pmv_Gas_Mktr_No = Eq.Marketer_Id
AND pmv_received_timestamp= eq.enroll_date ;
The problem is that the date is stored in Oracle in the following format: DD-MON-YYYY and in SQL as 'YYYY-DD-MM HH:MI:SSSSSS'
for example: Data in Oracle would be 27-JAN-2012 and in SQL as 2012-01-27 00:00:00.000
I get an error when I compile.
How do you reconcile the formats when the syntax is different between databases?
Thanks, SeanDATE datatypes do NOT have any "format"
DATE datatype is stored in internal binary notation.
use TO_CHAR to display, present & compare the DATE datatypes

Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2

Hi,
I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
(Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
Here I copied a part of it:
warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies
+     libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+     libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
+     libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
+     yast2 is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
+     yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
+     yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
What's wrong here and what is to do?
I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
Any help would be greatly appreciated,
Roger

error: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies.

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

Stuck while installation of oracle in linux

Hi guru's
i am stuck with a problem while installation of oracle in linux please help me
i am getting following error
[root@localhost etc]# groupadd oinstall
groupadd: group oinstall exists
[root@localhost etc]# useradd -m -g oinstall-G dba-d/home/oracle-s/bin/bash-c"oracle software Owner" oracle
useradd: unknown group oinstall-G
[root@localhost etc]# Thanks in advance

Brian while keeping that space getting this error actually
[root@localhost etc]# useradd -m -g oinstall -G dba -d /home/oracle -s /bin/bash-c “Oracle Software Owner” oracle
Usage: useradd [options] LOGIN
Options:
-b, --base-dir BASE_DIR       base directory for the new user account
                                home directory
-c, --comment COMMENT         set the GECOS field for the new user account
-d, --home-dir HOME_DIR       home directory for the new user account
-D, --defaults                print or save modified default useradd
                                configuration
-e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE
-f, --inactive INACTIVE       set password inactive after expiration
                                to INACTIVE
-g, --gid GROUP               force use GROUP for the new user account
-G, --groups GROUPS           list of supplementary groups for the new
                                user account
-h, --help                    display this help message and exit
-k, --skel SKEL_DIR           specify an alternative skel directory
-K, --key KEY=VALUE           overrides /etc/login.defs defaults
-m, --create-home             create home directory for the new user
                                account
-l,                       do not add user to lastlog database file
-M,                       do not create user's home directory(overrides /etc/login.defs)
-r,                       create system account
-o, --non-unique              allow create user with duplicate
                                (non-unique) UID
-p, --password PASSWORD       use encrypted password for the new user
                                account
-s, --shell SHELL             the login shell for the new user account
-u, --uid UID                 force use the UID for the new user account
-Z, --selinux-user SEUSER     use a specific SEUSER for the SELinux user mapping

Guide to installing XE and Apex on Oracle Enterprise Linux 5.3 (64 bit)

I have just been through a time consuming and frustrating process of installing Oracle XE 10gR2 on Oracle Enterprise Linux 5.3 x86-64 and I want to share my experience so that others can benefit from it and overcome the same problems more quickly.
Prior to starting I had installed OEL 5.3 and been using it for a few days. The system I am using is a home built box with an AMD Phenom X4 955 Black Edition, 8 Gb RAM, Highpoint RR2680 RAID controller with 4 1TB disks in a RAID5 array and an additional 320Gb HDD storing the OS. I am using KDE3.5 on the desktop.
The main problem I encountered was with SELinux. As I eventually intend to have this system exposed on the Internet I was reluctant to switch it off despite having read extensively about the issues surrounding it and Oracle. I had several failed attempts at the installation process before succumbing to the reality that SELinux and Oracle are not happy bedfellows. I decided to switch SELinux to permissive mode having followed the advice here.
I found a very helpful guide to installing XE on Linux here as part of the installation of an application called Spacewalk. Note that you do not need to complete the whole Spacewalk installation, but just follow the instructions in the linked page.
Before you start you need to ensure that the UID of your oracle user is less than 500. Mine was 500, so I used the following commands to fix this:
usermod -u 250 oracle
find / -uid 500 -exec chown oracle {} \;
These change the oracle UID to 250 (but check that isn't already used first!) and the find command searches for all files that were owned by oracle (but weren't after the usermod cmd) and changes them back to oracle's ownership.
Now follow the Spacewalk instructions until you reach the Server Setup section. Before you do this you need to make a couple of changes to the script /etc/init.d/oracle-xe. I found these changes in various places, such as [link(1)|http://forums.oracle.com/forums/thread.jspa?messageID=1345771&#1345771] and [link(2)|http://dbataj.blogspot.com/2008/08/lblibrarypath-is-not-set-on-startup.html].
Note that in link(1) the oracle-xe-selinux packages installed have the same effect as the chcon command on the shared libraries so it isn't necessary to perform this step.
Open /etc/init.d/oracle-xe in vi (or your favourite editor) and do the following:
line 49: change /bin/su to /sbin/runuser
after line 52 (export PATH...) add the following lines:
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
There are further changes recommended to /etc/init.d/oracle-xe in [this post|http://forums.oracle.com/forums/thread.jspa?messageID=3201491&#3201491] but I haven't done them yet.
Having done the above changes you can now configure Oracle XE by running /etc/init.d/oracle-xe configure (as root!). As I have Apache Tomcat running on port 8080 I changed the default HTTP port to 8500 but kept the listener on its default port of 1521. Once the confuration script is done you will need to change the ports SELinux uses for Oracle as follows:
semanage port -d -t oracle_port_t -p tcp 9000 - deletes port 9000, which is the SELinux default port for Apex
semanage port -a -t oracle_port_t -p tcp 1521 - ensure that listener port is OK (assuming you used default of 1521, change accordingly if you didn't)
semanage port -a -t oracle_port_t -p tcp 8500 - add the new Apex HTTP port to SELinux
After all this running:
semanage port -l | grep oracle
should show you:
oracle_port_t tcp 1521, 8500
I ignored the TNSNAMES.ORA part of the Spacewalk instructions and proceeded with the 'Client setup on 64bit platform' and 'Configuring sqlplus' sections.
For the latter I created a bash script which I have made available in the oracle user and my own user's home directories:
cat > configure_oracle_10g_xe.sh
ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
PATH=$PATH:$ORACLE_HOME/bin
ORACLE_SID=XE
export ORACLE_HOME ORACLE_SID PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
I did this as I intend to install other Oracle databases, e.g. 11gR2, on this box later so I didn't want to put the above in .bashrc.
Having done the above you should be able to log into the database using sqlplus and the XE setup is complete.
The upgrade of Apex 2.2 to Apex 3.2.1 was fairly painless so I won't go into much detail about it - just follow the instructions provided by Oracle.
The only issue I had was right at the end of the process and is documented and answered in [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=958611&tstart=0].
That's it - I hope somebody will find this useful.

On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
Sorry
8(
Hope this helps

Error in invoking target 'client_sharedlib' when installing Oracle on Linux

Hi ,
im tring to install Oracle 10g R2 on CentOS 6 on 64bit server ,
the error below displays when it's 80 % already installing:
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk.
below is the last lines of my $ORACLE_HOME/install/make.log
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
"/u01/app/oracle/product/10.2.0/db_1/install/make.log" 126L, 8147C
Please, Help meeeee!!!!

user11309581 wrote:
Hi ,
im tring to install Oracle 10g R2 on CentOS 6 on 64bit server ,
10gR2 is de-supported - plus CentOS is not a certified distro, so things may or may not work - http://download.oracle.com/docs/cd/B19306_01/install.102/b15668/toc.htm#BABIAECC
the error below displays when it's 80 % already installing:
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk.
below is the last lines of my $ORACLE_HOME/install/make.log
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//u01/app/oracle/product/10.2.0/db_1/bin/genclntsh
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/10.2.0/db_1/lib/libsql10.a when searching for -lsql10
/usr/bin/ld: cannot find -lsql10
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
"/u01/app/oracle/product/10.2.0/db_1/install/make.log" 126L, 8147C
Please, Help meeeee!!!!Try installing on a certified distro such as Oracle Enterprise Linux - free download at http://linux.oracle.com
HTH
Srini

Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet HWaddr 00:15:17:F7:81:53
          inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
          inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

How to install and use the Gnome-DO application in oracle enterprise Linux

My Oracle Enterprise linux is 5.3,
I want to install and use the Gnome-Do(http://do.davebsd.com) in my box.
Please help me regarding this.
With Regards
DSK

According to Google, Gnome-Do has known issues about CPU bugs and hogs and the latest incarnation does not seem to be available for RHEL and clones. You should have more luck with Linux Desktop distributions like Fedora and Ubuntu. Or you could try to build from source using the info at: http://do.davebsd.com/wiki/Installing_Do. Good luck - I wouldn't bother.

Oracle Enterprise Linux 5.4 32bit is not available in oracle edelivery.

now, Oracle Enterprise Linux 5.4 32bit not in oracle edelivery. the zip file have no speed. but the new release is normal.
From where can i download it. thank you!

Hi,
The Oracle Enterprise Linux 5.4 is in oracle edelivry in URL with a file .zip.
- Select a Product Pack: Oracle Linux
- Platform: x86 32 bits
Then, choose Oracle Linux Release 5 Update 4 Media Pack for x86 (32bit)
- DownLoad
- Decompress and you find the Enterprise-R5-U4-Server-i386-dvd.iso
an enjoy you self
I hope this can help you
Best Regards

Oracle 11g on Oracle Unbreakable Linux

OK,
I have installed 11g on a new installation of Oracle Enterprise Linux 5. Everything seemed to go OK except the swap space was set to 2Gb and 11g wanted 3.4Gb. The documentation I found on ONT said that was fine and normal as the default install gives only 2Gb. I created a startup DB of JSI. I can connect to is using sqlplus user@JSI. However, when I try to connect using ..... $ sqlplus user/password@host:1521/JSI I get this error....
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
I am also having other issue but want to look at the one at a time to see if on fixes the other.

Thanks for the help and suggestions. Here is what I get when I give the lsnrctl serv...
$ lsnrctl serv
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 16-DEC-2007 08:04:30
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "JSI" has 1 instance(s).
Instance "JSI", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2452 refused:0 state:ready
LOCAL SERVER
Service "JSIXDB" has 1 instance(s).
Instance "JSI", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:972 state:ready
DISPATCHER <machine: linux1.company.local, pid: 8776>
(ADDRESS=(PROTOCOL=tcp)(HOST=linux1.company.local)(PORT=47596))
Service "JSI_XPT" has 1 instance(s).
Instance "JSI", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2452 refused:0 state:ready
LOCAL SERVER
The command completed successfully
$ sqlplus jsicgusr@linux1:1521/JSI
SQL*Plus: Release 11.1.0.6.0 - Production on Sun Dec 16 08:06:51 2007
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
Enter user-name:
Here are my tnsnames.ora and listener.ora
# tnsnames.ora Network Configuration File: /opt/oracle/product/11g/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
JSI =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = linux1.company.local)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = JSI)
# listener.ora Network Configuration File: /opt/oracle/product/11g/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = linux1.company.local)(PORT = 1521))
Message was edited by:
user610650

Oracle 11g grid control software for Oracle Enterprise Linux 5.0 version

Hi,
Just curious to know when Oracle 11g grid control software for Oracle Enterprise Linux 5.0 version will be released. If already released, can you post the link?
Regards,
Manohar

aadragna wrote:
What is the best installlation document to follow for the latest EM Grid control ?The latest Grid Control is available for download at http://download.oracle.com (Scroll down to "Enterprise Management"). There is a README beside the download link. THAT README PROVIDES INSTALL INSTRUCTIONS.
In a nutshell, you install the lowest version (10.2.0.1 or 10.2.0.2, which ever is lower for your Grid Control platform), and then apply the 10.2.0.5 patch according to the readme. That should not normally take more than a day.
>
Also, can GRID discover PeopleSoft and Siebel application software ?
That can be found using the self-help portal: http://otn.oracle.com -> Products : Enterprise Management (left edge menu). In the 'Product Focus' area, you will notice 'Application Management' which will lead you to the appropriate data sheets and supporting information.

Problem while connecting to oracle in linux

i connected to oracle in linux as
"sqlplus ,#sysdba,"
after that it asked me for password
and i typed as "oracle"
after tat message displayed that "connected to IDEAL instance"
SQL>select * from tab;
i got an error message staying tat "ORACLE not connected"
can anyone help me out where the poblem is getting

hi,
after tat message displayed that "connected to IDEAL instance"
i got an error message staying tat "ORACLE not connected"you are connected to an ideal instance.
you should mount and then open the database
if you are using spfile
then issue
SQL>startup
database mounted.
database opened.
or
SQL> startup nomount pfile='location'
database will be in nomount stage
SQL>alter database mount;
database mounted.
SQL>alter database open;
then you can issue your command..
regards,
Deepak

HELP WEBDB/Oracle 8i/LINUX!!

Similar Messages

Maybe you are looking for