Help Weird issue after expanding another emac.

ok i expanded my first emac no problem.
ended up with a g4 800 Mhz emac and after a cd drive upgrade i have to restart the machine sometimes the drive will power up and function and the other half of the time the drive doesn't show up in mac os x tiger What the heck??
please help me
the system specs are
G4 emac 800 Mhz
512 Megs of ram
250gig hard drive
mac os x tiger (10.4.11)
Ilife 08

Got it!!!
Let me explain if you run into this problem yourself.
The emac seems to power down the cd drive to conserve power once you place a cd in the drive the drive appears in disk utility.
Weird!!!

Similar Messages

Need help on a really weird issue after ios 7 install

Ok I installed ios 7 yesterday without any issues except personal feelings regarding the new os but I digress. After the install I started exploring and found a glitch, hack, conspiracy, whatever you want to call it. When I open safari there are 5 seperate "app like boxes" or shortcuts that have all Miscrosoft windows material/information. I have a 4s and my wife the 5 both with ios 7 and her's is not like this. Instead she has a few shortcuts to a few different apps that were not picked by her. I called apple care and they said they never heard of it nor did they have a fix, just to do a hard reset. They also mentioned that if I had a hotmail/outlook material installed prior to the new ios install that this could of caused it but backed away from that resolution as I further described my issue. After the hard reset and 3hrs later, no dice, same issue. Any suggestions? I hope I explained it for you guys to inderstand but this is truly a must see to beleive/understand.

Thanks Josh.
I finally tracked this down last night with help from the folks at actionscript.org. I hadn't deactivated my Debugger which runs off of a desktop AIR application - so the server was trying to reach my localhost to run its trace statements. Deactivating the Debugger fixed the problem.

PLEASE HELP! Weird Issue after Restore

I had to do a restore on my iPhone. I'm in India right now and everything seems to be working fine, but I keep getting an error message at startup that says
"Waiting for AT&T activation
This may take some time."
It gives the option to dismiss, but why is this message even showing up? My phone number shows up properly in iTunes and the phone recognizes that I'm activated properly. I don't get it.
Is this going to show up every time I start the iPhone?

Did you do the restore here in US or in India? That SIM card is looking for at&t service and since it is not available there it gets stuck in that endless loop. Try to put it in airplane mode and see what it tells you. All I can say is just cancel it and sync as you would normally do. Watch out for a huge bill IF you are making calls. Hope you realize that and don't be surprised when the bill arrives.Read up on some of the stories other users here have posted on that issue.

HELP: texting issues after hurricane

Hi,
I've noticed a lot of issues with my phone lately and was wondering if I could get some help. These issues started occurring after the hurricane so I was also wondering if perhaps there are service issues with verizon that might be affecting my phone because of the hurricane and if maybe there are other people experiencing the same things.
So, my phone occasionally will not send a text message regardless of the amount of service I currently have. I get error messages all the time and have to attempt to send the message up to three times before it finally works. Likewise, my mother texted me asking why I sent her a message three times when I had only sent it once. These are all minor issues, but the one thing that is bothering me the most, as it is making it impossible for me to have a conversation or make plans with anyone is that my phone is not receiving text messages at the appropriate time. On occasion it will, but there are times when I will receive four texts to a conversation I was having hours before much too late. I've also noticed that the texts that are received in a timely manner usually seem to prompt the older texts to come through--when I receive messages they seem to come in groups at the same time regardless of when they were actually sent.
As I said, however, these issues all began happening after hurricane Sandy and because I currently live in New York City, I was wondering if this is something that comes as a consequence of the hurricane that I will simply have to wait out, or if there is something wrong with my phone.
Any help would be appreciated!
Thanks!

I haven't heard anything from verizon about it yet but I did run into another verizon user (without an iPhone) who said he's been having the same problems. I think it's pretty safe to assume hurricane sandy messed things up but hopefully someone can confirm or deny that.
Sent from my iPhone

Weird issue after charging

I have an iPOD, that when connected to the Power Adapter, shows a full charge.
When I connect it to my PC it shopws the charging icon and nothing else.
If disconnected from either it goes off and I cannot bring it back on again.
I have tried to resetting it, resetting it after one day, moving it to disk mode.
I restarted my PC, but this issue is still seen.I also treid the USB port with another device and it worked fine.
Could someone pleae let me know how to get this iPOD working again?

The iPOD is on full charge and the following is showing up on the Diagnostics when I run the checks:
power > A2D tests
id = 0x57
A2D
VCC = 840 (4968mV)
Battery = 504 (4180mV)
4066_ISTAT=0
Charge=600
ACC=255 92550mV0
Battery A2D
Battery = 507 (4188mV)
VCC Main
VCC = 839 (4965mV)
VCC PASS
ACC
ACC = 255 (2550mV)
ChargingADC Test
Charge=0
4066_ISTAT=0
Ibat=0mA
Ibat PASS
USB DP
USB DP = 354
USB DN
USB DN = 490
SDRAM Full TEST
RUN: BL on
PASS: BL blink
FAIL: BL Off
Would anyone know how to interpret these?

Frankenmac - Weird Issues After Build

A friend of mine has been putting together a "new" iBook out of spare components from other iBooks. He has a G4 800MHz logic board, bottom case, top case, and Combo Drive from one iBook, a DC-In Board from another, a display assembly from a third, and a hard drive from somewhere else. He put it all together, and this is what happens:
When it tries to boot, the fan comes on and stays on
The eject button doesn’t work
When you press the F5 button, the number lock light comes on
The display only comes on, maybe, one out of twenty startup attempts
Could it be that the logic board is no good, or could it be some other hardware issue? The PMU has been reset several times and a couple of hard drives have been tried.
Any thoughts or suggestions would be appreciated.

Hi Chris,
Have you tried booting from the CD? Do you hear any beeping noises? The display may have been install incorrectly; did you remember to reconnect the display data cable? You may want to look at Knowledge Base Document #106214 on Troubleshooting Startup Issues. Do you have access to another Mac? Can you hear the hard drive spinning? You may be having a problem with the reed switch. There are many problems that could be causing this; do you know that all the parts were working when you got them?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

[SOLVED] A series of weird issues after update (printing, clock etc.).

After an -Syu
1) I cannot print - printer is not detected and cupsd doesn't start:
/usr/sbin/cupsd: error while loading shared libraries: libkrb5.so.22: cannot open shared object file: No such file or directory
(I've reinstalled cups and heimal, have run updatedb and have created symlinks to so.25, but no joy).
2) I can't open HP Device Manager - claims I need pyqt, even though I have it!
3) Can't open printer management - Firefox can't establish a connection to the server at localhost:631.
4) Gnome clock applet doesn't load or work
Any thoughts?
(I'm not using testing btw)
** EDIT: All solved - never mind - my own fault - mixing repos for core/extra blah blah... **
Last edited by floke (2008-07-21 12:46:15)

I think I have. I've been using Arch for over a year and have merged pacnew files multiple times. Anyhow, wouldn't an incorrectly merged pacnew have created problems from the time it was last edited, in my case January 29?
Or is the LOCALIZATION session only read when mkinitpcio is run? That would explain it.

Flex 4.5 weird issue

Hi All,
I have encountered a weird issue after I migrated my application from flex 3.5 to flex 4.5.
In our application, we have 3 kind of views, View, ChartView and StackedView, the later extends the former one, let's say, in ChartView we have
<local:View...>....</local:View>, in StackedView we start with <local:ChartView>. We config the view type in the database as View.swf, ChartView.swf and StackedView.swf. The problem here is for example, if I load a view with StackedView.swf and change to a view with ChartView.swf, some of the components will not initialized, we get runtime exception like
ArgumentError: Error #2004: One of the parameters is invalid.
    at flash.display::Graphics/drawRect()
    at mx.controls::VRule/updateDisplayList()[E:\dev\4.5.1\frameworks\projec ts\mx\src\mx\controls\VRule.as:256]
    at mx.core::UIComponent/validateDisplayList()[E:\dev\4.5.1\frameworks\pr ojects\framework\src\mx\core\UIComponent.as:8989]
    at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.5.1\framewo rks\projects\framework\src\mx\managers\LayoutManager.as:736]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.5.1\frame works\projects\framework\src\mx\managers\LayoutManager.as:801]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.5 .1\frameworks\projects\framework\src\mx\managers\LayoutManager.as:1180 ]
We debugged into the code, and found that the exception occoured before the parent component is initialized. Actually the parent(or the parent's parent) component's height or width is NaN.
By the way, if we load ChartView.swf directly, everything works perfectly.
And I just solved the problem by spliting the 3 type of views, say, keep the View.swf, comibine the code from View.swf with ChartView.swf to a new ChartView.swf, the same to StackedView.swf, which now combines 3 type of views' code.
Though the problem is solved, but everyone can see it's not an elegent way, and the maintenence cost is high.
I suspect it is something related to load module or unload module, seperating the 3 type of views just make sure they didn't share something.
Can any expert help me figure this out? Many thanks.

Use the profiler to see what is hanging onto the old memory. But my main point is not about memory. It is about sizes. An empty container has no default size. When it gets a child it often picks the child size, and then if that child is removed and another child is provided, instead of picking that new child’s size, it might still use the old child’s size, and that might cause the new child to layout at a different size than if it was the first child.

SCCM 2012 R2 - OSD issues after update to CU4

Over the weekend, I updated my SCCM environment from RTM to CU4.
All seems to have gone well, except for OSD
When attempting OSD, I receive the following error:
"An error occurred while retrieving policy for this computer (0x80004005)..."
So, a quick look over at smsts.log and I see the following:
I did some bing'in and googling around for this and found plenty of pages about this error and all pointed to incorrect BIOS times. I checked the BIOS time on the system I was trying to image, and it was correct (including date). Just in case,
I tried two more machines and I had the same issue. Each machine has the correct BIOS date/time as well, so the issue I have doesn't seem related.
... and that brings me here. Does anyone have any insight as to what might be causing the issue?
Thanks!

I noticed two thing in your log file that are worth a check:
I noticed a 404 error in your log file that might indicate an issue with some files that can't be found. Check the IIS log file for more information;
I noticed that you're using HTTPS. I've seen weird issues after a CU update in which the distribution point certificate got missing. In that case, check the distribution point properties and update the boot image.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
I did miss the 404 message... silly me.
This definitely pointed in the right direction. What we found was that it wasn't an issue IIS or the https certificate, but our certificate chain had issues. We cleared out the certificate chain issues and re-installed the MP role. This
cleared the issue immediately.
Thanks Peter for the guidance!

HT201365 i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808

In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section. After doing so, I received a message that my event is already open with the same identifier as the new one I just creat

In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section. After doing so, I received a message that my event is already open with the same identifier as the new one I just created on the new disk. It says the second document cannot be opened and to move one of these documents out of your Final Cut Events folder. It also says to avoid this problem, copy events from within Final Cut Pro, but that is what I did in the first place. What should I do to avoid the double opening conflict?

What exactly are you doing and what version are you using with OS X 10.8?

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Having a weird issue with my assign after java embedding

hi,
I'm having a weird issue with my assign activity, i am using a Java Embedding wherin i access a variable and assign it some data, later in next step when i try to assign some other data to this same variable in assign activity i get a Error message as below.
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} parts: {{ summary=Invalid to part type. When performing the assign operation, the to node THIS,IS,,TEST is invalid. The node named in the error message was either null or an empty node set, and it was not an instance of org.w3c.Element. Verify the node value at line number 795 is not null and is an instance of org.w3c.Element. } .
i'm using soa 11.1.1.5
Can anyone please help ?
- Thanks
Shirish

Shirish,
It's a bug and you will need to apply a patch for that.
You can find all explanation in Oracle Support Id ID 1194228.1.
Arik

Another issue after upgrade to 9.0.2a beta

another issue after upgrade from 8.1.7 to 9.0.2a beta.
When I use "update-request", I need to specify a stylesheet. In that stylesheet, the following lines work before upgrade:
<row>
<fieldname1><![CDATA[<html><head></head><body>]]><xsl:value-of select="request/parameters/fieldname1/."/><![CDATA[</body></html>]]>
</fieldname1>
</row>
After upgrade, it doesn't work properly. What I see in the database field value is storing only
<html><head></head><body></body></html>
instead of storing
<html><head></head><body>fieldname1_value</body></html>
How can I get my result back?
Thanks in advance.

Thanks Steve,
I've upgraded to 9.0.2.0B but find the following error:
Oracle XSQL Servlet Page Processor 9.0.2.0.0B (Beta)
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/jdbc2/Clob
at oracle.xml.xsql.actions.XSQLUpdateRequestHandler.handleAction(XSQLUpdateRequestHandler.java:103)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:134)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:139)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:83)
at com.caucho.server.http.Invocation.service(Invocation.java:237)
at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:323)
at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:263)
at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
at java.lang.Thread.run(Thread.java:484)
Does it relates to the changes of usage of the "update-request" syntax?
Thanks in advance
Felix

Help?? Apps from another (who I don't know) user are on my iPhone after update and restore from my iMac not cloud.

HELP?? After restore and backup of my iPhone 5, there are a couple of apps requiring someone else's iTunes login criadentials. Tried to delete apps from other person off of my phone w/o any luck. I have NO idea who's iTunes library this is. Please help!?!

These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem?

Help Weird issue after expanding another emac.

Similar Messages

Maybe you are looking for