Help!!! What are need to be installed for VC 7?

Hi Friends,
I need to install the VC 7 on EP7. When i get into the service.sap.com, i found the following :
- VISUAL COMPOSER FLEX 7.00
- VISUAL COMPOSER FRAMEWORK 7.00
- VISUAL COMPOSER GP KITS 7.00
- VISUAL COMPOSER XX KITS 7.00
I Checked for the documentation/guide, but no where i received the information of what pieces needs to be installed and also what sequence it should be.
Could any one pls let me know the series of pieces with the sequence of installation for getting Visual Composer7 on EP7 SP7.
Thanks for your time...
Raghavendra Pothula

You should use the JSPM to deploy the entire SP7 stack with use type EP. Make sure you deploy new components as well in the JSPM. Then VC will be available via this url http://<host>:<port>/VC

Similar Messages

How can I determine what software needs to be installed for images to display in a Safari browser?

Hi Everyone,
I had to rebaseline my MacBook Pro and I am starting from scratch. When I open certain webpages in Safari, the images I know should be displayed are not coming up as though I am missing some sort of COTS software. I do have Adobe Flash installed already but obviously that is not what I need or I would be seeing some images. I would appreciate any help/suggestions trying to figure out what I need to see images on certain webpages. My guess is the images are dynamic being flashed across the screen to make people want to buy their products. Thanks in advance!

Flash likley needs to be updated, web browsers will disable outdated plugins now.
Use this handy checker. and it wouldn't be a bad idea to have more than one web browser on the machine.
https://www.mozilla.org/en-US/plugincheck/

Please help me... music or play video, it pauses music/video for few seconds (2-7sec). kindly help what i need to do... will appreciate much...thank u my MBP specs: 13 inch early 2011 2.3 ghz intel

please help me... im having troubles using itunes, When i start listening music or play video, it pauses music/video for few seconds (2-7sec).
kindly help what i need to do... will appreciate much...thank u
my MBP specs:
13 inch early 2011
2.3 ghz intel core i5
4 gb 1333 mhz ddr3
mac os x lion 10.7.5 (11g63)
itunes 10.7 (21)

1. A 13" screen is awfully small to do any efficient editing. The 15" gives you significantly more on-screen real estate.
2. All of the MacBook Pros can run FCE. However the graphics processor in the 13" model will limit some functionality with effects. See Tom's earlier comment.
3. Not much difference. All these cpu's are fast. There will be more overall system performance gain from the quad core at the slower speed.
4. FCE cannot use more than 4GB RAM anyway, so the 4GB that comes with every MBP is more than adequate. If you expect to use Aperture or CS5 then go for more RAM, otherwise there's not much reason to add RAM. You will be better off spending your money upgrading to the 7200rpm hard drive.
5. Everything will be smaller on the high res screen; there are just more pixels (1680x1050) on the same 15.4" screen area. (I have a 15" MBP with the standard 1440x900 screen and it is beautiful.)

What are the operating system requirements for installing a trial version of lightroom 4?

what are the operating system requirements for installing a trial version of lightroom 4?

http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Mylenium

What are the pros and cons for installing the OS X Yosemite while still using Adobe CS6 Softwares?

Having trouble understanding what are the benefits to install the new operating system for my iMac?

Having trouble understanding what are the benefits to install the new operating system for my iMac?

Components need to be installed for AII

what are the components need to be installed for AII ,to access remotely located AII server. Requirement is for RFID implementation.

Hi
Refer this thread on RFID implementation if it helps u RFID Std content
Message was edited by:
Anusha Ramsiva

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What are the different transaction codes for PGI?

1. What are the different transaction codes for PGI?
2. What transaction code should I use for a Group Delivery?
Regards,
Nazim.

Hi
Go to VL02 and you can do the PGI.
Regfarding Group Delivery, you can create a batch job and link the program to the batch job so that the job picks up all the orders and create deliveries.
Creating a Background Job Using the Job Wizard
From the main menu select System>Services>Jobs>Define Job (transaction SM36).
Press the Job Wizard button and step through the screens as follows:
1:Continue
2: Enter a name for your job. Continue.
3: Continue with ABAP Program Step selected
4: Enter the ABAP Program Name and variant name.
Press the Print Parameters button, specify the required printer and set the "Time of Print" to "Send to Print Spooler for now".
Press green tick
Continue
5: If more reports need to be added to the job tick the checkbox, press continue and repeat screens 3 and 4.
6: Select how the job is to scheduled (eg Date and Time)
7: Enter the required scheduling information ( eg Date and Time) and if required tick "Periodic Jobs"
8: If "Periodic Job" was selected select the frequency (eg Monthly)
9: Check the job details and press Complete
Hope the above info helps.
Reward if useful
Regards

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Error "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"

I have a Curve 8300. With OS v4.5.0.81. And I am on a BB Social network plan through my cell providor "Fido".
I mainly use it for Facebook & Twitter and have no problems using either app. However I was prompted for an update for my twitter recently but wasn't near a wifi spot to update. Just decided to update today at home where I do have wifi. However when I go to do the update, it gives me the following error:
"Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"
I have scoured for answers but haven't had much luck. I tried checking for OS updates. I apparently have the most current one that my phone will support. I uninstalled twitter and then tried to reinstall it via the twitter Icon on my phone. Got the same error. Tried reinstalling it through app world, it installed just fine. However it installed the version that I had previously had. So I went to twitter's settings and checked for updates. It prompted for one as I expected it would. And when I tried to get the update. It gave me that error again. I can use twitter as it is, but I don't see why my phone shouldn't be able to get all the updates for various apps. Is it a software compatability issue? Is it a hardware compatability issue? Is there anything I can do to get the update or do I just have a phone that won't take some app updates?

Hi and welcome to the forums!
The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
Thanks,
Bifocals
BlackBerry Device Software 5.0 main support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

What are the best AirPlay speakers for Apple devices?

What are the best AirPlay speakers for Apple devices? I would like to get some good speakers to be used with my iPod, iPhone and iPad. Ideally, they should be able to play using AirPlay and be quite powerful, but with a good design if possible.
I am particularly interested in the Fidelio range of speakers by Philips.
Thank you for your help in advance.

Best is going to be a matter of opinion. What environment are the speakers going to be used in? How large is the room? What type of music are you going to play? What features/functions would you like in the speakers? What price range are you looking for? All of these are going to effect which speakers will best fit your needs.

What are the chances on installing Windows 8 pro on mac?

Hi guys, i just wanna know if what are the chances on installing a windows 8 pro on mac?
I just bought a CD of windows 8 pro. Im planning to use it on my mac because i am currently studying a software which is applicable on windows such as Visual Studio 2008, 2010 or 2012.
I am planning to use bootcamp for windows 8 pro, i dont like to use parallels or vm.
and i heard about bootcamp doesnt support windows 8, is that true?
If it is true, so does it means it is not possible to use windows 8 using bootcamp?
Am i right that bootcamp offers the drivers or something?
Or can i just update the drivers for windows manually, u know the thing which u can found it on control panel on windows.

Grazzii wrote:
Running Windows 8 on my iMac right now buddy. You don't actually need Bootcamp to do all the heavy work for you - it's just a parition tool. However, you will need Bootcamp tools once Windows is installed to get the most out of windows. Without the Bootcamp tools installed, Windows will run - your mouse and keyboard should also work, but the resolution, graphics, speed.etc will all be a little over the place. I used Bootcamp tools 3.0 as it came with my iMac, not sure if the latest 4.0 works...
Boot Camp 5.1 is the latest version, but no version includes drivers for Windows 8.

What ports need to be opened for Podcasting?

To all,
I am a little lost. We have a server which is inside our firewall. What we're trying to do is to use this server as a test bed for podcasting. Our network admin is going to set it up so that it's behind the firewall but we can still access the content from home or anywhere. Now my question. The admin has asked us what ports need to be opened for podcasting. We have no idea. Is this something we need to setup on the server we are using or is there something else.
FYI - We are using a Windows NT server...I know, I know, I need to upgrade.
Any help is greatly appreciated. Thank you in advance.
zanm
Other OS windows NT server

Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

What accounts need to be configured for a service tax 10%,a balance sht a/c

This below error occurred while clearing the entries.
"Ex.rate diff.accts are incomplete for account 0003260423 currency INR"
I have gone through this and found that, we should need to configure gain/loss accounts in OB09.
I am not sure, what accounts need to be configured for a service tax account(3260423), Its a balance sheet account.
Can someone guide me on this.
Thanks
Sudhir Krishna Kumar Singh

Hello Sudhir,
regarding to your incident, could you please try the following:
   1.The problem is probably caused by the settings in transaction OBA1.
     The system checks OBA1, if there is an entry for process KDF and
     the relevant G/L account 135090. If there is none -> F5 063 is
     created. Also the exchange rate difference accounts have to be
     maintained in OB09
     If you make a dummy entry in OBA1 & OB09 this account will be
     selected when trying to make an exchange rate difference posting.
     Please also check the documentation to field "No forex rate diff.
     when clearing in LC" in transaction OBY6.
   2.Basically solution is to create the mentioned account for exchange
     rate difference, in order to avoid error F5063.
     But, if you don't want to post that difference, I ask you to check
     the solution proposed into OSS note 546997.
Hope this could help.
regards
Ray

What are the backend configuration required for photo upload from portal?

Hi all,
When i am trying to upload the photo from portal it is giving error
can not archive the photo
we are using portal 7 and ecc 6.0
I want to know
What are the backend configuration required for photo upload from portal
Can any but help me out
Rajendra

Hi,
Are you using the standard iview. If that's the case you need to configure in the backend. Meaning you need to store the photo in the Org management(HR) which the HR functional guys will do. You just need to add the iview to your role.
Let me know if you require further informationn.
Award points if helpful.
Cheers,
sathya

Help!!! What are need to be installed for VC 7?

Similar Messages

Maybe you are looking for