Help...what is error 2330??

Hi I was wondering if anyone could help me out. I havent logged into my itunes for awahile. And now when I try to go to my itunes, I cant seem to get in. Its also telling me that I have an error 2330.
I also tried deleting my itunes and then reinstalling it, but again it tells me that I still have that error 2330. I even tried deleting all the file individually. And their were 2 files that I could delete were "ko.lproj" and I forgot what the other file name was called.
Can anyone please help me out? I would greatly appreciate it. Oh one more thing, sorry im kinda computer illiterate (sp?), so you might have to walk me throught it step by step.
Again thanks once again
P.S. to the moderators or the adminsitrators, sorry for the double post. I put this thread in the wrong section prior to this one.

I scrolled around in this site and I saw some alot of people had the same problems as I did. But to go into the details that im running into....I just did that diagnostic test (or what ever you call it), and it says that I had a problem with my "NTFS" file. And it did an automatic fix. So then I tried to install itunnes once again. And it still runs into the same problem. it says...
error writing file:
D:\iTunes:Resources\ko.lproj\APPLE TV Help.chm.
Verify that you have accessto that directory
So then I tried getting into the file and its asking me to format the drive. So I say yes. And then it tells me that I am not able to format the drive.
So again, if any of you can give me any advice on how to solve this problem, I would greatly appreciate it. Once again Thanks in advance

Similar Messages

  • HT201210 phone screen is stuck on itunes connection help what is error 3194

    my phone sceen is stuck on itunes connection cant get calls or get to main screen tryed to up date but keep saying that its a error 3194

    See your other post on this Topic...
    https://discussions.apple.com/message/23362244#23362244

  • Error 2330 on Itunes 8 install on vista log attatched... I need some help

    I can't tell if this is quicktime or itunes, but I really could use some help here. I think I have spent 10 hours trying various fixes on this. Does anyone know of a fix?
    these are some of the errors in the log
    MSI (c) (18:00) [16:20:51:016]: PROPERTY CHANGE: Modifying IAcceptLicense property. Its current value is 'No'. Its new value: 'Yes'.
    DEBUG: Error 2826: Control LangCombo on dialog DestinationOptions extends beyond the boundaries of the dialog on the bottom by 7 pixels
    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: DestinationOptions, LangCombo, on the bottom
    Action 16:20:51: DestinationOptions. Dialog created
    DEBUG: Error 2330: Error getting file attributes: C:\Program Files\Java\jre6\lib\ext. GetLastError: 1392
    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.
    MSI (c) (18!38) [16:21:52:446]: Product: iTunes -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.
    DEBUG: Error 2769: Custom Action InstallPackages did not close 2 MSIHANDLEs.
    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2769. The arguments are: InstallPackages, 2,
    Action ended 16:22:11: InstallPackages. Return value 3
    Action start 16:22:11: SetupCompleteError.
    DEBUG: Error 2836: The control Back on the dialog SetupCompleteError can not take focus
    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2836. The arguments are: SetupCompleteError, Back,
    Action 16:22:11: SetupCompleteError. Dialog created
    Action ended 16:22:13: SetupCompleteError. Return value 2.
    Action ended 16:22:13: INSTALL. Return value 3.
    MSI (c) (18:10) [16:22:13:141]: Destroying RemoteAPI object.
    MSI (c) (18:20) [16:22:13:141]: Custom Action Manager thread ending.
    Property(C): UpgradeCode = {0880A3FD-2A1E-43C5-B020-09930E075D34}
    Property(C): EXISTINGIPODINSTALLDIR = C:\Program Files\iPod\
    Property(C): AUTORUN = #1
    Property(C): PROGRAMMENUNAME = iTunes\

    I can't make sense of all that, there seem to be several things going on.
    What error to you get from the installer itself rather than the event viewer?
    In general, 2330 errors can be due to filing system problems so, a good start would be to run a disk check.
    Then try again if it finds errors.
    If it still doesn't work try the general install troubleshooting in this article:
    http://support.apple.com/kb/TS1717
    It would help if you say what you have tried and what the results were if you have been working on this for some time.

  • While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

    While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

    What DVD drive are you using?

  • TS3694 Hello, I have an error while trying to add move music into my itunes library. 'The itunes library file cannot be saved. You do not have enough previledges for this operaion? help - what does this mean?

    Hello, I have an error while trying to add move music into my itunes library. 'The itunes library file cannot be saved. You do not have enough previledges for this operaion? help - what does this mean?

    Hi luxmi01,
    Here is some information and troubleshooting on the permissions issues you are seeing:
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    Cheers!
    - Ari

  • Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. What can be done?

    Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. Does anyone have any ideas what can be done?

    follow the steps in this article first
    =http://support.apple.com/kb/HT1451
    after that restore your ipod and resync it
    hope this helps:)

  • I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

    i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

    If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD.  Files can sometimes go bad and become corrupted.  As to how or why that happens, there are a number of ways.
    What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
    iTunes: How to convert a song to a different file format
    B-rock

  • What is error code 2330 when trying to intall itunes

    what is error code 2330 when trying to upgarde/ install itunes

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • What is error (16) during updating i phone5?and I cant turn it on? Please HELP...!

    what is error (16) during updating i phone5?and I cant turn it on? Please HELP...!
    Serial No.F2******TWD
    IMEI/MEID *****
    iPhone 5 16GB
    Model A1429
    <Edited By Host>

    See this support document Resolve iOS update and restore errors - Apple Support, but an error 16 is usually a hardware error. I will also ask the hosts to edit your personal information about the phone. You should not post this on a public forum.

  • I bought an apps "Latitude". when i tried to see my friends list its showing error - "nsurlerrordomain error 999". Please help what should i do??

    I bought an apps "Latitude". when i tried to see my friends list its showing error - "nsurlerrordomain error 999". Please help what should i do??

    Google 'nsurlerrordomain error 999' and see the hits there!

  • HT1338 I receive this message ,repeatedly,when I try to update an App through App store:Error code 1009.Please help,what should I do?

    I receive this message ,repeatedly,when I try to update an App through App store:Error code 1009.Please help,what should I do?

    The App Store is not available in Iran.

  • Error 2330...can anyone help?

    Today I tried to get on iTunes and out of nowhere a box popped up that says "Please wait while Windows configures iTunes" (I may have agreed to upgrade it the night before, I'm not sure). It looked like the process was running smoothly but then a box popped up that said it couldn't find C:/Program/iTunes/iTunes.Resources/nl.lproh/iPhoneHelp.nib. I tried uninstalling iTunes but then error 2330 popped up. I tried re-downloading iTunes and then installing it but Windows says that an error occurred during installation. Now when i try opening iTunes it says the following:
    "The installer has insufficient privileges to access this directory: C:/Program/iTunes/iTunes.Resources/nl.lproj/HomeSharingPlacard.nib. The installation cannot continue. Log on as administrator or contact your system administrator."
    I'm so confused, I know this is a lot to read lol. Can anybody help me out with this?

    Today I tried to get on iTunes and out of nowhere a box popped up that says "Please wait while Windows configures iTunes" (I may have agreed to upgrade it the night before, I'm not sure). It looked like the process was running smoothly but then a box popped up that said it couldn't find C:/Program/iTunes/iTunes.Resources/nl.lproh/iPhoneHelp.nib. I tried uninstalling iTunes but then error 2330 popped up.
    That's probably disk/file damage causing that, Scarlet. (Is there a Rutgers connection to that alias?)
    Try running a disk check over your C drive, as per the instructions in the following document. Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.
    [Check your hard disk for errors|http://windows.microsoft.com/en-us/windows-vista/Check-your-hard-disk-fo r-errors]
    Does the disk check find/repair any damage? If so, try launching iTunes again. Does the repair install go through properly this time?

  • HELP- what does this mean- time machine error- backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?

    The last date of my back up was 10/4- keeps saying The backup disk image "/backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?

    HELP -- what does this mean -- .......
    Often, this error can be corrected by pulling the power on the Time Capsule, waiting a few minutes, and powering the Time Capsule back up.
    See # C12  for more tips
    http://pondini.org/TM/Troubleshooting.html

  • HT1338 I have plugged in a external drive and i get the following error message 'mount - t-ntfs-3g-o force/dev/rdisk3s1' help what does this mean?

    I have plugged in a external drive and i get the following error message 'mount - t-ntfs-3g-o force/dev/rdisk3s1' help what does this mean?

    You may be infected with malware.
    See: [[/questions/860893]]

  • What does error C:31:25 mean? i have an HVR-M25U. Please help.

    what does error C:31:25 mean? i have an HVR-M25U. Please help.

    Hello.
    Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
    Information about error -50 and downloading videos
    http://support.apple.com/kb/TS1583
    If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273.

Maybe you are looking for

  • Why do not Canon 350D show up in the Finder?

    Hi I have connected my Canon 350D, using the USB connector. It does not show up in the Finder window. IPhoto will automatically start and I can download the images. I prefer to use Photoshop CS2, but the canon is not shown there eighter! How can I ge

  • Oracle Development Survey on Data Warehouses: How Does Yours Compare?

    At the start of most data warehouse projects, or even during a project, I am sure you as customers try to find answers to the following questions to help you plan and manage your environments: * Where can I find trend and comparison information to he

  • Make "idea exchange" read-only til 2015!!!

    why would you just make 'All of the hard work and deep thought that went into most of those ideas, as well as some very  well-thought-out replies', just vanish!!????? now there's no way to crosscheck if an idea has been sent in b4....please put it ba

  • PCo 2.1 and Proficy iFix using OPC DA

    I'm finding some interesting behavior when trying to access Proficy iFIX  HMI / SCADA with PCo 2.1 using OPC DA. PCo Version 2.1.0.55 iFIX version 5.1 SCADA OS: Windows XP Pro, SP3 MII Version 12.1.5 Build(99) What happens is that when I do a tag lis

  • Headers when create a Database table

    Hi, I think this question would be simple. I'm working with a mySQL Database. I proceed as follow: 1) I open the connexion (OK), 2) Insert data on table -table1- (OK), 3) Execute a query (OK?) 4) Create a new table (table2) and Insert data from query