HELP! When I attempt to use my volume, it brings up my calculator!!!!

When I attempt to turn the volume UP or DOWN using the volume keys at the top of my keyboard, my screen minimizes and my calculator pops up. The volume will NOT change at all!!! I have NO idea how this happened!

Hi lisalebo!
You may want to try simply restarting your iPad, which is explained in the following article:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
You may also need to attempt a reset, as described in the article above. If you are still experiencing issues with your passcode, you may need to reference the following article:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Thanks for using the Apple Support Communities!
Cheers,
Braden

Similar Messages

I switched to Apple Mail in the last two months. When I attempt to print an email message, I get a blank piece of paper. When I attempt to use the print options suggested in "Mail Help", the program crashes and has to be reopened. Any ideas?

I switched to Apple Mail in the last two months. When I attempt to print an email message, I get a blank piece of paper. When I attempt to use the print options suggested in "Mail Help", the program crashes and has to be reopened. Any ideas?

Which version of Mail are you using as well as which Snow Leopard version you are using?

Lost my iPad and when I attempt to use the "LOST" feature in icloud, the NEXT and CANCEL buttons are not responding. I have tried this on 3 different windows based computers. Any ideas???

When using icloud because I lost my ipad...when i attempt to use the "LOST" feature the "next" and "cancel" buttons do not respond. I have attempted this on 3 different windows based computers on 3 different networks. Any ideas?

Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom

TS2755 I am signed in to imessages, when I attempt to use this app...I get a message that I need to sign in again. However, it states that I am already signed in. How do I fix this?

I am signed in to imessages. When I attempt to use this app, I get a message stating that I am already signed in and cannot proceed. How do I fix this? I have tried rebooting, turning on/off, etc. Please help!

Try:
iOS: Troubleshooting Messages

1) (Right click) Context menu is IE's context menu(!) and when I attempt to use a sight that uses scripts (a site that I've used extensively and which I use to conduct my online college courses - application is Angel), it goes blank

1) (Right click) Context menu is IE's context menu(!) and (2)when I attempt to use a sight that uses scripts (a site that I've used extensively and which I use to conduct my online college courses - application is Angel), it goes blank
== This happened ==
Every time Firefox opened
== 2 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; WWTClient2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; Creative AutoUpdate v1.10.10)

Previous post from "Not Anonymous" but from the original poster; I used the link provided in the email notification and now have to indicate who I am???
Thanks; starting FireFox in safe mode and disabling all add-ons did solve the problem; however, a new problem has emerged. To re-enable the add-ons, you need to open up and use the add-ons control panel through FireFox. Any attempt to do so causes the FireFox add-on control page to close immediately.
Thanks for your help.

When I attempt to use software Update, and am then prompted for my Apple ID and password, my apple ID is not complete and it is 'grayed out' so I cannot change it.

When I attempt to use Software Update, then go to 'Update All', I am then prompted to enter the password for my Apple ID, however my Apple ID does not come up as complete, and it is 'grayed out' and I cannot change it, therefore it is impossible for me to update my software. How can I change the Apple ID to the correct ID?

You need to delete the application and then download it from the desired Apple ID.
(96010)

Security error when lightroom attempts to use the internet

When using plugins e.g. smugmug or facebook after upgrading to Lightroom 3 I get -
System returned "securityError"when lightroom attempted to use the Internet.
tried to repair LR3, did not work. Suggestions on how to fix this?

Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

I am not able to purchase apps, I'm not getting any error alerts. I just get no response when I attempt to purchase. Also when I attempt to use a search engine to find a itunes app I just get redirected.

I am not able to purchase itune apps. I do not receive a error message.
I do not get a response when I attempt to purchase.
When I use a search engine to find a app and it is to be
Found at the itunes site I get redirected.

Have you tried resetting and restarting > iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
Or restoring > iTunes: Restoring iOS software

I am getting JavaScript Errors when I attempt to use the Multiscreen Preview function in DW CS 5.

When I attepmpt to use the Multiscreen Preview button in DW CS 5 I get the following error:
"While executing onShow in MultiscreenPreview.htm, the following JavaScript error(s) occured:
In file "Multiscreen Preview":
onShow is not defined"
This leads to either an unusable multiscreen preview box or another series of similar JavaScript errors.
Is there a solution to this problem and if so what is it?
Thank you for your time.

Follow this KB article:
http://kb2.adobe.com/cps/405/kb405604.html
Start with 12 & 4 and then go through the rest if needed.

Must use Step Input Keyboard prior to using midi controller? When I attempt to use my midi keyboard conteoller for step input, it won't work unless I input the first note in each track via the Step Input Keyboard. This doesn't seem right...

When I try to use my midi controller keyboard for step input, it won't work unless I input the first note in each track via the Step Input Keyboard.. What am I doing wrong?
Logic Studio 9.1.7, OS X 10.7.5

Hi
Playhead in the right place?
CCT

HT4428 I continue to get the HDCP playback error when I attempt to use NetFlix.

This is beyond the point of frustration, and getting to the point of Apple technical error. Every time I try to use NetFlix on my Apple TV, I get an HDCP playback error saying that My TV does not support HDCP. It does. Most times when i try to use Netflix I will get the first 2-4 seconds of the show to play and then it freezes and says its not supported. This does not happen when I view YouTube Videos, or those purchased from ITunes or directly from apple. Only when using Netflix. I've tried unpluging the unit, I've tried switching the cables. Is there a fix to this problem or does this product just not work?

I've had my Apple TV 2 since June 2012. It worked perfectly for 3 months. Now occasionally, when I try and watch Netflix I get a HDCP error. I have not changed anything with my setup. Same tv, apple tv, hdmi cable as when I first bought it. Every device is updated with latest firmware. After multiple resets on each device and the occasional switch of the hdmi port on the tv it starts to work again. But after a few days the same thing happens again. This is very, very frustrating. Please advise if anyone has any thoughts.

My Firefox just crashed, when I attempt to use it again, this pop up appears : Your computer need to be restarted to complete a previous upgrade of Firefox, I have restarted my unit many times after receiving this pop up but still nothing has changed

just gave a detailed description on my question, please help me

It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
To properly close Firefox on Windows systems, use
:File > Exit or "Firefox:" button > Exit
When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile.

After upgrade to mavericks my cpu goes to 100% when email attempts to use my address book

Since upgrading to Mavericks, whenever I attempt to add an address to an email message, both CPU's will top out at 100%. After It eventaully finds the needed address, either from my stored addresses or the LDAP server, it will continue at 100% for some time before the message eventuall sends and things return to normal.
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM101.00CC.B00
SMC Version (system):          1.53f13
Serial Number (system):          QP0090ZT5PE
Hardware UUID:          CC3046D9-4CAD-58FC-B6A7-D9751AE3C954

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Why can't I add names when I attempt to use Photostream on my newly updated 4s?

When I try to add names it won't let me. Bear with me I am new to "Photostream"

The best answer would be from the author of the software.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
There is a contact page on the web site, they know their software better than I do.
They used to have a free version that only did complete clones, the paid for version does a diff, much quicker apart from the initial backup.
Ask them.

Geting odd error message when I attempt to use photomerge

This popup says it all but to provide some clarification...
I am running LR4 & PS 5 which are loaded on my computer, not CC under WIN 7 OS, 64bit w/8gigs of ram and a scratch drive that has 500gig of space. I tried to move the images from LR to PS, the process I've always used & used last week where some 20 images were merged into one and no changes have been made to my system or these programs since then. As a work around I unstacked the selected images and tried it again, that failed. I then exported the images as stand alone files then opened then in PS and attempted to merge them w/no success. As a last attempt I shut PS down & relaunched it but got the same results.
Please advise what I should do to resolve this. I do A LOT of panoramas & PS is my preferred tool.

Make sure the script is in each version of Photoshop yoy have installed in \Presets\Scripts\Stack Scripts Only\ folder...

HELP! When I attempt to use my volume, it brings up my calculator!!!!

Similar Messages

Maybe you are looking for