Help when starting my ipad2 i just get screen flashing different colours but get sound of apps in background

have tried resetting and syncing several times, but its getting worse everyday

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

Similar Messages

  • HT201406 when i make a video then is screen show different colour and they didn't make a video good? i m using a iphone 5.

    when i make a video then is screen show different colour and they didn't make a video good? i m using a iphone 5. plz give me good advise... I buy this mobile two month ago...

    Cannot recall the full line-up of Effects in Pr 6.5, but you should have the fixed Effect>Motion>Scale, which will allow you to resize the Clip. You might need to use Motion>Position in addition. Basically, you will doing a PiP (Picture in Picture), with no Clip below, just the black showing.
    Good luck,
    Hunt

  • When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!

    When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!

    If you keep getting a 'red' message it means that the HDD is faulty and will have to be replaced.  You will have to format the new HDD in Disk Utility>Erase and then install the OSX and your data from Time Machine.
    Ciao.

  • I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise.

    I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
    I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
    Is this something I should be able to achieve without having to recode the files?
    Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
    Thanks in advance for any help

    Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
    However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD)  - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
    Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
    Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
    Steven

  • When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

    When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

    Firstly, I should have typed speedtest.net previously.
    Now that's an interesting comment you make, out of interest do you have any purchased HD movies in your iTunes collection, if so, do they play on the Apple TV with your new tv.

  • Mac crashed and now upon restart I cannot launch any applications. When I try to, I just get the colorful pinwheel spinning, spinning, spinning...

    mac crashed and now upon restart I cannot launch any applications. When I try to, I just get the colorful pinwheel spinning, spinning, spinning...

    Troubleshoot the spinning beach ball

  • How do I import my photos from my iPhone to iPhoto, when I press import I just get a message saying there is something wrong with one of my photos and disconnects my iPhone.

    How do I import my photos from my iPhone to iPhoto, when I press import I just get a message saying there is something wrong with one of my photos and disconnects my iPhone.

    I couldn't find Image Capture at my first try, butI will try again. Do you inow how I can find the corrupted photo on my iPhone? Im a bit lost..
    Sorry, I just noticed, I made a mistake. "Image Capture" is in the Applications folder, not Utilities. And it may have a different name on your Mac, if your system language is not English:  Look for the icon with the camera:
    When Image Capture can import from your iPhone, spilt the folder with the imported photos in several small subfolders and try to import them separately to iPhoto. This way, you can identify a subset of photos with the corrupted one.
    Then try to import from that small subset one by one, until you hit the culprit. And then delete that photo or video from the phone.

  • HT4718 at start up I am just getting a grey folder icon with a ? inside it

    at start up I am just getting a grey folder icon with a ? inside it

    Press the Command and R keys and either use the Disk Utility to repair the internal drive or the Installer to put a new OS onto it.
    (83635)

  • I recently dropped my ipod in water and i placed it into rice for 3 days. Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest

    Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest to the no battery screen and i get error 1602. Do you know what is wrong with it? do you think its just the battery cause i can replace that for cheap or do you think the circuts are fried?

    No. It sounds like the water destroyed the component inside the iPod.
    About your only choice now it to take it to Apple and pay for a replacement.
    Allan

  • When Mac reboots to Install XP black Screen Flashing Dash (-) stuck.

    when Mac reboots to Install XP black Screen Flashing Dash and I think its the press any key screen but on a Mac its Just Flashing Dash .
    I press every button going and nothing happens.
    and my only option is to turn off the mac to boot back in OSX.
    MacBook trying to Install Windows XPSP3 disk.

    I too am having the same problem. I do not know about the host of this thread, but I have been using a brick and mortar version of XP SP2 stand alone so it is not bundled with a computer like Dell, HP, etc.
    I have run it before just fine but it was time to reformat the drive, 0'd everything out, reinstalled 10.5.2, upgraded everything, repaired permissions and them ran Boot Camp. Put in the XP disc and all I get is the flashing dash mark in the upper left hand corner. I actually have 2 legal versions of XP SP2 stand alone and the same result on both discs so it has to be something with the partioning? I also redid the partitioning at various sizes all with the same effect. No luck.
    Any new thoughts anyone?

  • I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but  when i watch them on my apple tv there is video but no sound ... why ?

    I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but  when i watch them on my apple tv there is video but no sound ... why ? all my other videos are fine and they in mp4 format.

    Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

  • I have updated my iphone to ios6 but when I receive a message it does appear in my newsfeed but not on the app. Normally there was a red sign with a 1 or 2, ... inside but that's gone, is it normal?

    i have updated my iphone to ios6 but when I receive a message it does appear in my newsfeed but not on the app. Normally there was a red sign with a 1 or 2, ... inside but that's gone, is it normal?

    i m also put passcode in my iphone...but i dont know that how i know that my passcode is crack by someone???and same as police is not interested to find out it..
    i want ma iphone backkk...........

  • When I turn off the phone, the screen flashes with sony logo. any solution?

    Hi,
    when I turn off the phone, the screen flashes with sony logo. any solution?

    repair your phone with
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Just bought HP Pavilion 23xi monitor, but no sounds. is there built in speaker?

    just bought HP Pavilion 23xi monitor, but no sounds. is there built in speaker? or any HP monitor has built in speaker?
    This question was solved.
    View Solution.

    Hi,
    The following link shows its specs:
       http://www8.hp.com/emea_africa/en/products/monitor​s/product-detail.html?oid=5328978#!tab=features
    No speaker. Please try the following nice monitor:
        http://store.hp.com/webapp/wcs/stores/servlet/us/e​n/mdp/accessories-88342--1/hp-pavilion-touch-monit​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • IPhone screen is different colours with a black mark in the corner and lines on it. Help?

    I dropped my phone accidently but the screen didn't break and it was fine when I picked it up (I could view my lock screen). After a couple of minutes my screen went different colours with lines on the edges of it and a black mark in the corner. How can I fix this?

    Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. If that does not work, then the LCD has probably failed. Despite the fact that the glass did not break, it does not mean that it was not damaged. Make an appointment at the Genius Bar to have it looked at.

Maybe you are looking for

  • I dropped my iPod Touch and now it won't come on without it being connected to a charger but it won't charge either...

    So I was in the bathroom, cleaning my iPod case, and I accidentally dropped my unprotected iPod Touch from about two or three feet up. I picked it up and tried to turn it on, but it would not work. I freaked out and went to my charger in my room and

  • Copy more than one A/R Invoce to an A/R Credit Memo

    On this case I´d like to copy more than one AR Invoice to (just) an AR Credit Memo and that feature does not exist on SAPBO. Create a AR Credit Memo without link from AR Invoice is not a correct way. Because the items costs will be the current one an

  • Calling a function inside a symbol?

    Hi there, I'm one of those flash-devs that are trying to get Edge Animate to do what I usually do in Flash, so I might be doing this the wrong way, but I've got a symbol with a function "inside" on my stage, and I wanna call that function from the st

  • Cannot Create Albums: Clicking on Photo in New Album Changes Photo

    This is really strange. When I import photos from a USB device the import seems to work O.K but if I create a new album when I click on any of the photos in the album, the photo is changed to a different photo from my library. This occurs even if I c

  • Can anybody give me the solutions for these

    In the definition of Item Catogory vov7, thers is a field " Relevent for Delivery", The same field is there in the definition of Scheduleline catagory vov6. 1. Y the same field is there in both definitions? 2. If I didnt check the field in item catag