Help!!! Where can I insert IP address , Port, Homepage on my 8900???

I cannot find where to tap in internet settings on my 8900, all I have been able to add is the APN, but no IP address, no Port, no Homepage, can somebody help me please, the  user manual does not give any indications on this topic and so I have not been able to use my Virgin UK Internet service at all (Virgin UK have provided me with settings to insert myself manually since  they don't support Blackberrys, the phone won't even connect to my Wi-Fi it says there is no data plan active so I can't even add any applications to the phone?? I'm stuck, I never imagined connecting to the Internet with a Blackberry could have been so difficult. Thnx for all help
Solved!
Go to Solution.

BlackBerry device is designed to work in that complex fashion. It is also done for security reasons. All the settings are hard coded and no one can brake those codes. The device can only communicate when the BlackBerry APN is available for it and that is achieved by having BlackBerry data plan enabled.
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • Where can we track the Address Change Details

    Hi all,
    Where can we track the Address Change Details either through forms or tables
    How can we differentiate the old and new addresses
    Thanks in advance

    select person_id, count(*)
    from per_addresses
    where trunc(sysdate) between date_from and nvl(date_to,sysdate)
    group by person_id
    having count(*) > 1;
    check columns ADDRESS_TYPE & PRIMARY_FLAG.
    These determine whether the address is primary or not, and also what type of address it is.
    Cheers,
    Vignesh

  • Forms online help where can I found on my disk

    where can i found on my disk Oracle Forms online help (help that is embeded with Oracle Forms - with F1 button)? Is there any reference to this help on the internet?

    start at otn.oracle.com/products/forms and also check out my blog entry
    http://www.groundside.com/blog/content/GrantRonald/Forms_in_SOA/2006/05/25/Teaching-you-to-fish.html
    there is a link to documentation on the forms home page
    Regards
    Grant

  • Where can I find my address book after Synchronization to outlook

    Hi Guys, I finished sync according to the following procedures:
    1. Start Button - on your computer there is a large button in the bottom left corner of the screen.  Click it.
    2. Now you'll see an entry that states "All Programs".  Click it.
    3. Look for a folder labled "Palm".  Click it.
    4. Look for an entry labled "PIM Conduit Sync".  Click it.
    5. Choose "Sync with Outlook".  Click it.
    HotSync.
    The question is that I can't find the contact information document after successful sync whe I start my outlook program. Where can I find it?
    Thanks.
    Post relates to: Treo 680 (Unlocked GSM)
    This question was solved.
    View Solution.

    Thanks for providing your solution! 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • HT1688 where can i find IP Address for my iphone 4

    where can find IP Address on my iphone 4s

    Settings > WiFi tap the small blue arrow next to the network you are connected to.

  • Help:where can i download jdk1.4 amd64-bit for windows server 2003 version?

    where can i download jdk1.4 amd64-bit for windows server 2003 version?

    Thanks all for your replys.
    As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
    Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
    ' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
    When will be 64 bit runtimes for CR 08 will be available?
    Thanks

  • HELP: Where can I customize in SPRO the sysmsg "Deficit of PU Ordered Qty"?

    Hello MM Gurus,
    Greetings!
    Where can I customize in SPRO the system message "Deficit of PO Ordered Quantity.."? Your prompt response is highly appreciated.
    Thanks very much.
    Cheers,
    Albert

    Check the IR has been done already?
    If ir has done already then you cannot cancel / reverse goods receipt.
    You must Cancel the IR and proceed.
    Or in Spro Check the Option GR Cancellation despite IR.
    You can use Search to find more related threads

  • Beginner Needs Help, where can I go?

    I am a brand new user of Audition CC the latest version 2014.2 release. I have no experience whatsoever with Audition, setting it up, adding and/or changing shortcuts. Don't even know how to get back to default settings with all the panels. All the online tutorials from Adobe don't start at the beginning on how to set up Audition, it goes right into "How to remove noise from audio files".  What, why would a beginner start with that?  Where can a new user/beginner go to download a PDF or even video tutorial on starting to use Audition from A to Z.?

    I believe that Lynda.com do some. Adobe used to produce a series called 'classroom in a book' but I haven't heard much about that lately. There are also some videos on YouTube if you search around.
    One of the problems you will run into is that at heart, Audition is professional software (it's used by the vast majority of the world's radio stations), and that most pros know the basics anyway, as the principles are universal. So there's not so much call for the basic stuff, and it's only the ways to nuance the more advanced stuff that you'll tend to find easily. Which is why they tend to start with stuff that's anything but basic.

  • My iphone 5 sleep button doesnt work properly. Need help where can i get it fixed

    I bought my i5 in january from croma, delhi and last 5-6 days i am noticing that my sleep button is not working properly on the right side. I searched for solution on the net but all i got to know that this is a problem in iphone 5 and need to be replaced. And i have no idea how to get it fixed or where to contact to get it replaced. Need urgent help.
    Thanx in advance

    modular747 wrote:
    It means that for one year from the data of purchase, Apple will replace the phone with a refubished unit for any malfunction not due to abuse or physical damage (i.e dropping, exposure to water, etc,)
    To be clear, it's a new or refurbished unit, whichever Apple has in the replacement phone stream.

  • NEED HELP: Where can I try out the iOS SDK in Melbourne, Australia?

    hey guys, i'd love to try developing for the iOS SDK and from what i can tell the only way i'll know if i can develop for it is actually doing it myself. i've been reading books about it, but i feel like this just isn't enough. the only problem is, i don't have a Mac and i'd rather not buy one just in case the SDK isn't for me because then i would have bought the Mac for no reason.
    there are a couple Apple retail stores near me, but i've never been into one before. does anyone know if they'll be able to help me out by allowing me 20-30 minutes to try out the SDK? i don't mind paying.
    thanks guys, i'd appreciate any help.

    Walk in to the store and ask. In general, Apple Store employees are told to display a helpful attitude towards (possible) clients.
    If they don't have a Mac with the SDK already installed, you might want to come back later until the local Genius is done downloading and installing it.

  • Can't insert email address into subject of SCEP request

    According to the SCEP payload rules here: http://developer.apple.com/library/ios/#featuredarticles/iPhoneConfigurationProf ileRef/Introduction/Introduction.html the following is written:
    "OIDs can be represented as dotted numbers, with shortcuts for country (C), locality (L), state (ST), organization (O), organizational unit (OU), and common name (CN)."
    In our CA environment, we want to also include email addresses in the subject itself, rather than in the SAN. This is how all other client certs issued through the CA (either via the certsrv web UI or by AD group policy) and to keep in line with other certs issued greatly assists certificate management tasks. For this Microsoft has the shortcut "E" for Email.
    This is listed in Microsofts documentation here: http://msdn.microsoft.com/en-gb/library/windows/desktop/aa386991(v=vs.85).aspx under "Subject.Email"
    So SCEP doesn't support the SCEP shortcut, but does support use of OID's. According to Microsofts own documentation above, the OID 1.2.840.113549.1.9.1 can be used for email, and the value should be a string. An example of an email address is given.
    In my own testing, when using the Iphone Configuration Utility to generate the SCEP request, using the OID value above and then specifying an email address works, except that everything including/past the @ symbol does not get sent in the request for the cert.
    So for example, if my SCEP configuration profile subject is entered as /CN=user-ipad/1.2.840.113549.1.9.1=[email protected]/ then the cert is generated and installed on the ipad or iphone.
    When looking at the certificate properties, the CN is correctly displayed as "user-ipad", but the email address is incorrectly shown as "user" rather than [email protected]
    I would like to know why the email address is getting sliced in the SCEP request, so that the domain part of the email address is not being sent to the SCEP server (Running on Win 2008 R2) & then how to fix it!
    Thanks!

    Hi Alex,
    I am also trying to install SCEP profile via IPCU to an iPad. It looks like you have already been through all the pain. I have to ask your expertise about the Subject Name and AlnativeName in the SCEP section in configuration profile.
    I have tried different varials like $COMPUTERNAME or $SERIALNUMBER, the iPad receives a certificate called
    $COMPUTERNAME.mycompany.com
    or
    $SERIALNUMBER.mycompany.com
    It did not return the actual iPad name or serial number, basically the variable did not work.
    What should I do to enable every devices receives a unique but also friendly name for their certificate?
    Thanks

  • Noob in Need of Help: Where can I find a 1Ghz Processor?

    Hi, I'm Elaine, I was given a 450Mhz, G4 Gigabit ethernet Tower as payment for some graphics work (yeah, I feel like I got cheated, but that's just me).
    Anyhoo, I'm rather fond of mac computers, but I'm finding to do the work I do I need to basically upgrade the processor, RAM, and hard drive and of course, add a TON of software (I'm a writer-filmmaker-animator-graphic novel creator-self publisher).
    From what I can figure out from reading the posts here, I could make do with a 1Ghz processor and about 2Gb SDRAM and a 160Gb hard drive. Most of the hardware I can find on ebay, except for the processor.
    Someone posted something about a "sonnet" processor, but I couldn't find anything like that.
    Could someone PLEASE tell me where I can find an AFFORDABLE processor?
    Can I use an AMD processor? Newegg seems to have one that's a single core selling for $33.00 if that's to be believed.
    Well, I won't keep prattling at you, and will simply thank you all in advance for your assistance.
    Namarie,
    E.

    Seeing you were given this Mac for payment, and seeing that you're new to Macs, you need to ask yourself if you have the skills needed to do these upgrades as well as whether you want to plunk down a sizeable amount of cash to upgrade a 10 year old Mac that will never perform as well as either a newer model or brand new Mac.
    If this is a 450 MHz Gigabit Ethernet model it is probably a dual CPU 450 model. I do not think you can put a single CPU upgrade into a dual processor Mac. I believe you need to stick witwh dual processor CPU upgrades.
    AND you cannot use just any CPU chip that would be available for Window PCs.
    The CPUs in older Macs are PowerPC CPU processors made by Freescale (formerly Motorola).
    Dual processor upgrades will not be cheap!
    A company called Other World Computing sells CPU upgrade, but none are very cheap.
    http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=165&type=Processor&T I=5206&shoupgrds=Show+Upgrades
    Based on what you listed that you would like to do with a Mac, the Mac you were given as payment is really not up to the challenges you want to put this Mac through.
    It's just going to get too costly.
    The Mac you've been given is just not worth plunking that kind of money into.
    I would either try and sell it or recycle it and look at new or newer model Macs with more computing horsepower.
    If a new Intel Mac tower or iMac is too expensive for you, my advice would be to give a serious look at the high end Mac Mini. Price to performance ratio is hard to beat and will easily do everything you want to do on a Mac.
    MHO

  • Help, where can i get this info?

    I've downloaded a music video and would like to add the song to my ipod shuffle can the music be exported without the 15mb video. thanx for any help

    I can't remember, too... but I vaguely recall iTunes extracting the audio from an mp4 file I have... you just have to configure iTunes encoding/grabbing to mp3 or aac then right-click on the item in the library and convert...
    tell me if this works... I'm rifling through my notes for the site that has the software for this kind of thing...

  • Where can i see mail address of the background job

    hi all,
    i have an issue where a background job will generate 2 programs and send mail to a person when the both programs will complete.but i am unable to see the mail address which are defined in the background job.please solve this issue.

    Check the program variants...

  • I need help:where can i repair my N72

    Please tell me who can repair my N72.The problem is the display chip but here in Romania I couldn't find the person who can change it or at least who can provide it.Can you help me please?

    Have you tried a nokia care point?
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

Maybe you are looking for