HELP! Which Sony DVDirect will work

I am an electronics dummy.  PLEASE HELP!!
I am planning on buying a Sony DCR-SX44 Handycam.  I want to be able to burn DVD's without a computer.  There are 2 DVDirects available the VRD-P1 and the VRD-MC6.   My questions are will either one work with this camcorder if so, is there any reason why I should by the more expensive.  Also, what is the difference in DVD+R and DVD-R.  Will my standard DVD player work for both?
Here are links to the three products listed.
Camcorder
http://www.bestbuy.com/site/Sony+-+Camcorder+with+2.7%22+LCD+Monitor+-+Silver/9753742.p?id=121816739...
VRD- P1
http://www.bestbuy.com/site/Sony+-+DVDirect+Express+6x+External+USB+2.0+DVD%26%23177%3BR+Drive/92624...
VRD-MC6
http://www.bestbuy.com/site/Sony+-+DVDirect+16x+External+USB+2.0+Double-Layer+DVD%26%23177%3BRW+Driv...

Hi mojo33,
Both of these drives should work fine for burning your video footage to a
DVD without being connected to a computer. The main difference between the two
is that the Sony VRD-MC6 has a 16x write speed, while the Sony VRD-P1 has a 6x write speed. From what I understand this would mean that a
typical movie will burn to a DVD on  6x drive in about 20-30 minutes,
while a drive that writes data at 16x could have a movie burned to a DVD in
5-10 minutes.
Another key difference is that the Sony VRD-MC6 can
burn data to a dual layer DVD which can hold up to 8.5 GB of information, while
the Sony VRD-P1 only records to normal DVDs that hold 4.7 GB of data. From what
I understand DVD+R and DVD-R discs are very close, and most DVD players will
play both kinds of discs (check the specifications of your DVD player to see
what type of discs it accepts). DVD-R is the older technology, and thus has a
greater compatibility with DVD players.
Whether or not the additional cost for the Sony VRD-MC6 is worth it really
depends on if you believe the faster write speed, and ability to record to dual
layer DVDs is important to you.
Thanks for posting,
Allan|Senior Social Media Specialist | Best Buy® Corporate
 Private Message

Similar Messages

  • Which Sony TRV will work

    Recently my Sony TRV 900 firewire port got damaged and will not connect to my imac running Leopard 10.5.8. Rather than an expensive repair job I want to purchase on ebay another Sony that I can just use as a permanently connected tape importer. Does anyone know which models will import into Leopard without issues. I saw a TRV 22 on ebay but when I checked there were lots of people that were not able to see the camera for import. Any advice?
    Thanks
    Dave from Ireland

    Hi
    TRV 22 - should work - Cheque that it has DV in and out.
    I also use except TRV-900E use a SONY PC-330 and there are several PC-100 to 350
    or may be more that works.
    I use the DV-in to
    • make backup tapes of important material and final versions of movie projects
    • as a bridge to a TV so that I can see the editing result in real-time and full quality
    Test Your Camera on another Mac with Mac OS X.3.9 or X.4.11 and also test new
    FW-cable (very often the problem maker)
    Yours Bengt W

  • Which Sony camcorder will work with iMovie 8, HDRTG1?

    Since I upgraded ilife 08, I cannot capture video from my Sony PC3 to iMovie 08, it keeps dropping out. I think it's time to get a new one, this one is old. I like Sony product, does HDRTG1 work with iMovie 08? Anyone? Thanks Alex

    http://support.apple.com/kb/HT1014
    Follow the link for a list of supported cameras.

  • Which Speedlite Flash will work with my Canon Rebel EOS T3 1100 D?

    Hi, I am new to the digital age and over 55 years old.  My husband bought me a Canon Rebel EOS T3 1100 D in July.   (I fought the "technological" upgrade until my old Canon film camera quit on me.)  I've been taking pictures since 1966, so I'm not new to photographing, just to our technological advances.
    I would so very much appreciate if anyone could help me with which Speedlite flashes will work with my specific Canon T3 Rebel 1100 D camera.  
    Thank you so much for your time. 
    Solved!
    Go to Solution.

    I've just received my 430EX II that I purchased for use with my Rebel T2i. The main reason I purchased the Canon product was....in 60 years of using Canon products I've never had a failure or a bad experience. I've been using the 430EX ll for a few days and I'm quite happy with the results. Far, far better than the built in flash. It's on sale now with free Fed X shipping. That's hard to beat.
    Best of luck with your new camera.
    Joe

  • I have a MDD dual 1.25ghz processors and I would like to know which sata drives will work with the Sonnet Seria ATA pci card?

    Which sata drives will work with the Sonnet Tempo Serial ATA card?

    Pretty much any of the SATA 3.0 Gbps drives.
    Western Digital Black and Blue and Hitachi 7K drives are all good choices.
    If you try a SATA 6.0 Gbps drive, it will need to be jumped to limit to SATA 3.0 Gbps.

  • Which photoshop elements will work with a mac desktop v7.1 working on os 10.9.5

    I have a photoshop elements 11 which I purchased some time ago which has a disc for mac computers but will not load on my mid 70s (7.1) mac desktop which is running on the latest 10.9.5 maverick software can anyone give me advice on which elements addition will work on my Mac.

    That FAQ is merely the adobe official line. If you have a full version of PSE 6 for mac, it should work in 10.9, really.

  • Which USB Webcams will work with iChat?

    Hi,
    I'm new to these forums and am wanting to get a webcam, but iSights are no longer available and I don't have the interest or money to get a DV Camcorder.
    So which USB webcams will work with iChat?
    I take it I'll also have to purchase iChatUSBcam or whatever it's called.
    Thanks
    Iain

    Hi Iain:
    There is a list of cams on their website:
    http://ecamm.com/mac/ichatusbcam/configs.html
    The only USB cam that doesn't require iChatUSBCam is the iMage.
    -Ken

  • I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

    i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

    Read this. You need to be running Snow Leopard or later.
    http://support.apple.com/kb/ht3986

  • Which camera Raw will work in Elements 11 that support my new Canon  G1 X Mark II?

    Help!

    There will be full support for the G1X.2 in ACR 8.5, or so says the release notes for the ACR 8.5 release candidate at Adobe Labs; however, PSE11 stopped being updated last fall when PSE12 came out.  It remains to be seen whether PSE12 will get the ACR 8.5 update sometime in June or July, or if you’d have to wait until PSE13 comes out in Sept/Oct.
    The alternative is to use the free DNG Converter 8.5 to convert your raw files to DNG format, which will work in the older ACR plug-in in PSE11.
    The DNG Converter 8.5 will eventually be available here:  http://www.adobe.com/downloads/updates however for now you can use the release candidate available, here:  http://labs.adobe.com

  • [p7-1240] How can I tell which graphics cards will work with my motherboard?

    I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggling and scouring the internet for answers, I discovered that it is incompatible with the BIOS on my motherboard, and HP does not offer BIOS updates. I returned the card and am now looking for a new one, but I am unsure of which cards will work now, since my computer met all of the system requirements for the graphics card, and It stil ldid not work. Since GPU manufacturers do not list BIOS specs under system requirements, how can I tell if a graphics card will work with my sytem?
    My computer is a p7-1240 with an upgraded 520W PSU and approximeately 11" of room to install the card.
    This question was solved.
    View Solution.

    Thexn, welcome to the forum.
    The problem is, many of the newer video cards require the computer to have a full UEFI BIOS.  HP began using one in mid-October, 2012.  Before this date the BIOS is Legacy.  This is why the video card didn't work with your computer.
    I don't know what you want to spend for a card, but MSI makes a GTX 750ti that has a hybrid VBIOS.  It has a switch to change to Legacy or UEFI.  There is a video link directly below the picture of a card.  Paul from Newegg gives a full description of the card.
    I like EVGA cards the best.  Their Tech Support has given me a lot of information about their cards.  However, you have to go back to a GT 640 card to find one of their cards that doesn't require the UEFI BIOS.  They do have some updates for their BIOS'es that solve the problem, but you have to call them for the exact cards.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Which iphone version will work all over the world?

    Hello there.Im from Pakistan.Need some info related to iPhone. Next month i'am going to Canada and planing to buy an iPhone 6 from there.. So im confused which version will work fine here in pakistan.. Kindly guide me about the version which should i buy. I want a version which works all over the world.. Waiting for reply, thankyou!

    An unlocked iPhone should do the trick. You need to get it in an Apple Store. I have traveled around the world with my British unlocked Iphone and I've had no problems switching between sims.
    Good luck! By the way, revise your phone while you are on the shop, you don't want to find any defects when you are back in Pakistan.

  • Which cd rom will work

    I am looking for a used cd rom from ebay and was wandering how do I know which ones will work with my imac 400 ? I have looked at several of the slot loaders and they are from slot loading G3 imacs but will they work with any slot loading imac? here is the description " Slot Loading CDRW Drive CW-7121-B".

    This is offered on the rather limited experience of having replaced two of them in 350 and 400 slot loading iMacs. It seems that anything that is a slot loading optical drive will work. If there is a choice of jumpering, set it to "Slave".
    There are some good pictures and text on the take-apart in this swapping drives page.
    David
    Beige G3 300, iMac G3 400, iMac G3 600   Mac OS X (10.2.x)  

  • Which sata card will WORK! with a Mac G4 MDD Dual 1gb

    I have a G4 dual 1gb and the OS is 10.4.11.
    I want to put a sata card that will WORK, in this machine. I have tried an Acard 6293m, and it showed in the system profiler, but I couldn't see the hard drive. Is there ANYONE who has been successful with any sata card in this machine? Booting would be great but not necessary.
    Any help is greatly appreciated!!

    You're very welcome. The SATA/Raptor install made probably the biggest difference in performance of the many upgrades I have made to the MDD. The difference, while never quantified, was tremendously apparent on boot times and on apps (loaded on that drive) opening. I would not hesitate to make that investment again.
    For what it's worth, as a frame of reference I bought the MDD second hand. Prior to that I had been using a QS933 since new. I was disappointed at the time I got the MDD in what I perceived as a performance difference (or lack thereof) between the QS933 and the MDD's Dual 1.25's. That upgrade was not as noticeable, to me, as was the SATA/Raptor combo. It was a couple hundred bucks well spent.

  • Which Logic Boards will work in a 1.25Ghz eMac?

    I have a emac that has a possible bad logic board, it wont fully install OSX. I have tried several different versions with formating the drive everytime clean. I am just looking for a logic board now to replace out. I have seen some 1Ghz boards and wonder if that would fit in my 1.25Ghz machine.

    The 1GHz board will install in your 1.25MHz machine. The main difference you will find is that you lose USB 2.0 because the 1GHz board has only USB 1.1. The other difference is that the 1GHz board uses 168 pin PC133 ram and not the PC2700 DDR 333MHz 184 pin ram.But apart from the obvious loss of processor speed everything else will work.

  • Which Video Card will Work out of Box with P7-1240 Desktop with Win 7-64bit & AMD A10-5700 CPU?

    Hi Folks,
    I'm new here and have already searched for solutions.  I have P7-1240 Desktop purchased new in June 2012 with Jasmine MSI-MS-7778 motherboard, AMD A10-5700 quad core, 10 MB ram and Windows 7 64-bit.  I'm trying to install a graphics board so my son can play some games that he currently must play on low resolution using the integrated graphics.
    I updated my PSU to 600 watt Corsair and tried GTX 750 Ti and GTX-660 cards to no avail (the computer won't boot past HP splash screen).  I've also tried AMD Radeon R7-265 card but couldn't even boot to the HP splash screen.  As I understand, HP offers no BIOS updates for Windows 7 (I read here that one guy loaded a BIOS update for Windows 8 on his Windows 7 machine and it worked, but I am too chicken to try that).
    I just want to put this issue to rest.  So my question is simply this:  Does anybody know of ANY graphics card series that will definitely work OUT-OF-THE-BOX in my machine with the stock BIOS and PCI-Exp 16 Gen 2 slot?  I was going to try a GTX 500-series card next.  But I wanted to get some advice first, since I won't be able to return it if it doesn't work.
    Thank you!
    Gary
    This question was solved.
    View Solution.

    Hi,
    Graphics card compatibility with the BIOS levels in PCs is not the only factor.  PCI-E slot version compatibility both upwards and downwards would be another factor.  Manufacturers will at times view standards differently and hence design their graphics cards to function differently compared to the same card being made by a different manufacturer.  Manufacturers may also design graphics cards to only work with their motherboards.  Bottom line is that not every graphics card will work in every PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for

  • Connecting Ipod once synced with a PC to my Mac and not losing my songs!?

    I want to connect my Ipod (which I put all of the songs on from an Itunes on a PC) to my Mac but I am afraid that as soon as I hook it up, my current Itunes (on my new Mac) will delete all the songs! I need to know: a) how to get all my Ipod songs on

  • I would like to change my  iPhoto resoluttion on Mac. The pictures are too big for emailing and chaning my Facebook profile picture.

    I would like to change my iPhoto to a smaller resolution on my Mac desktop. The  pictures need to be smaller to email. As is, I can only get 5 pictures per page on AOL. Also, I'm not able to change my Facebook profile picture for the same reason. I d

  • Sliding Panels in a Div

    I can load the Sliding panels and it works fine except if you use "onload" with the Spry.Utils.updateContent. Tried many things so far and it will not work when loaded into a Div. Hmmm Can't figure out why. Anybody have a answer why it will not run i

  • Campaign Management - Procurement of Media

    We are starting a new project to implement SAP CRM and there is a set of business requirements around our planning and procurement of media, including TV, radio, newspaper, magazine, direct mailings, etc.  My initial plan is to implement Campaign Man

  • Parsing stopwatch data

    I need to parse stopwatch data from a textfile in a beautifull way. Data is represented in a "5.25.12" way, where 5 stands for 5 minutes, 25 stands for 25 seconds and 12 stands for 120 milliseconds. Is there a way to parse such a date with a SimpleDa