Help wid Seeburger Adapter

Hey guys
i urgently need help in Seeburger adapter,actually i have a scenario where in i m getting EDI directly from VAN or from seeburger adapter over XI,and i have to post this information to R/3 server,can anyone provide me with some links about how to start off with this scenario.
do i need to do any configuration over XI?how will i use the seeburger adapters ,any information will be really appreciated
thanx
ahmad

HI,
There are seeurger adapters, we can use , but we can use also with the file with seeburger modules also. Its all depends upon the what type of seeburger adapter was installed on your server and what are all the modules installed.
Any way see the below links on seeburger..
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Please let me know if you have any queries..
Regards
Chilla..
<i>Points rewarded if it  is usefull..</i>

Similar Messages

  • SEEBURGER adapter - How much does it help?

    We have a PI box just installed and we'll be implementing a few EDI transactions with some business partners.
    I was told that SEEBURGER is the preferred EDI adapter for EDI transmissions from PI (XI).
    1 - How much does SEEBURGER help the development of PI EDI interfaces? Is there a way to estimate on how much work is saved using it instead of relying on standard? (lets say 10, 20 or 30%)?
    2 - I am considering here 2 options (Use SEEBURGER or not). Is there a better alternative?
    Thanks
    Leonardo

    Hi,
    For EDI implementation there are ways by which u can implement with XI
    1) Using third party seeburger adapter.
    2) Conversion agent
    3) Writing module.
    Preferred one is seeburger.
    1) It has std XSD available which we just need to import into External definition
    2) It has std mappings for all the message type which converts EDI to XML and XML to EDI format.
    3) Provides different adaters
    4) BIC tool
    5) Many adapter modules.
    Seeburger adapters like OFTPS,AS2,X400 are used for B2B scenario where the file is coming through WAn network or mailbox. As XI dont have capability to convert the EDIFACT format file to XML the same work will be done by seeburger adapters.
    The SEEBURGER Business Integration Converter (BIC) is an any-to-any format converter, used to translate EDI data and legacy data formats into XML and vice versa. It can also be used for complex, high performance XML-to-XML mappings or to interface to existing JDBC data sources.
    Supported EDI formats include:
    • ANSI
    • EDIFACT
    • INHOUSE
    • IDOC
    • XML Schema
    • XML DTD
    • CSV
    • Delimited Data
    • positional data
    • SWIFT
    • EANCOM
    and many more.
    See for converting the EDI XML to EDI and XML-EDI you need to have a seeburger mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
    It provides std mapping program which does the conversion of EDI to XML and XML to EDI which need to used in XI comm channel module tab.
    Thnx
    Chirag

  • Bsi mapping in seeburger adapter

    hi experts,
    i want to know about bic mapping in idoc to edi scenarios in which i am using seeburger adapter.please help me and provide me some documentation.

    Hi,
    BIC is mapping tool which converts EDIFACT to EDI_XML.
    You will be accepting EDI flat file i.e. csv file and using BIC you will map it 1:1 mapping ....this flat file will be converted into EDI_XML after mapping.
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    Regards,
    Akshay Jamgaonkar.
    Don't forget to reward points.
    Message was edited by:
            Akshay Jamgaonkar

  • Error in Oubound message using Seeburger Adapter

    Hi,
    I'm getting this error on the Adapter engine when trying to generate an outbound EDI message with Seeburger adapter:
    2007-01-24 13:33:29      Error      Unable to forward message to JCA adapter. Reason:
    Fatal exception: com.seeburger.xi.connector.queue.QueueEntryRejectedException:
    Entry rejected due to error in resource management: null, Entry rejected due to
    error in resource management: null     
    2007-01-24 13:33:29      Error      MP: exception caught with cause
    javax.resource.ResourceException: Fatal exception:
    com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
    to error in resource management: null, Entry rejected due to error in resource
    management: null     
    2007-01-24 13:33:29      Error      Exception caught by adapter framework: Fatal
    exception: com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry
    rejected due to error in resource management: null, Entry rejected due to error
    in resource management: null     
    2007-01-24 13:33:29      Error      Delivery of the message to the application using
    connection File_http://sap.com/xi/XI/System failed, due to:
    com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception:
    com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
    to error in resource management: null, Entry rejected due to error in resource
    management: null: javax.resource.ResourceException: Fatal exception:
    com.seeburger.xi.connector.queue.QueueEntryRejectedException: Entry rejected due
    to error in resource management: null, Entry rejected due to error in resource
    management: null.     
    Any ideas?
    Rgds,
    Yves

    Yves,
    I think there is some problem in invoking the seeburger adapter. Have you installed the adapter? Also after installing you have to import the metadata. Check this document for further help:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
    ---Satish

  • Sender / Receiver ID mapping for EDI interfaces and Type of seeburger adapt

    We need to set up a interface using Seeburger adapter for Purchase order IDOC to 850 EDI mapping.. After reading from SDN,
    1) We can use the standard mapping in BIC MD to do E2X and X2E mapping..
    2) We can use any of the AS2, EDI generic adapter, Seeburger FTP adapter or Seeburger SFTP adapter...
    How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security...
    Also how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID
    Also the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping.

    Hi Kris,
    I had worked in the somehow same scenario, It was IDOC to EDIFACT file.
    I can give you few clues which might be helpful
    In BIC MD you have to create your own mapping if the standard mapping is not available (First check all the standard mappings in BIC). For your reference you need X2E mapping, as your scenario is IDOC to 850 EDI.
    "the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping."
    In graphical mapping i created my own mapping, Seeburger has given some sample mappings you can check those for your reference (SEEBURGER_GENERIC_EDI software component). Mostly you have to create your own. You need a document from your functional consultant so that you are able to map correct fields and constants.
    "how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID"
    This has been generally hardcoded in message mapping (In my case i hardcoded). If any of ur IDOC field contains that data you can map that field. But better Idea is ask your functional expert.
    "How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security... "
    You can choose adapter according to your requirement. In my case i used File adapter as i have to create file in PI server only. My suggestion you can use SFTP for seeburger
    Hope these points are helpfu for u
    Regards,
    Shradha

  • Configuration details about Seeburger adapter

    Hi,
    How to configure the Seeburger Adapter on the outbound and inbound side to intigrate with XI?
    Thanks
    Koteswara Rao

    Rao,
    You have to install the seeburger adapter and import the metadata into IR and use it. You check the document for some help:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
    SEEBURGER
    ---Satish

  • SFTP Seeburger adapter - Could not find channel for report handling between

    Hello Friends ,
    We have R3 -> PI-> SFTP scenario . The messages are transferred successfully and the file is successfully received at the receiving end . But when we do communication channel monitoring , we see errors in Receiver CC . The Reciever CC contains SFTP adapter (Seeburger) . Recently the Seeburger adapter is upgraded and the below error has started occuring then onwards .
    Error Message which we see in CC monitoring for Receiver CC (SFTP) is as below .
    Initiation of Transmission Report( job id: da405030-30c6-11df-8b6e-797b8921162c milestone: 290) failed! Exception occured: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) - com.seeburger.xi.connector.fw.ConfigurationException: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) [3/16/10 8:40 AM]
    Could experts help me ...
    Thanks for your time .
    Regards,
    Laxman Nayak .

    Hi,
    I also have the error you mentioned but we're implementing the Seeburger SFTP adapter for the first time.
    I've requested transport acknowledgements in my ABAP proxy and have checked the 'Deliver transmission report' flag in the adapter but I don't know what else I must do.
    Any help would be greatly appreciated.
    Thanks,
    Alan

  • Without using Seeburger Adapter can we convert EDI 864 TC to XML

    Hello Friends,
                            Can we convert 864 Transaction code (Text Message) to XML with out an External adapter like Seeburger Adapter? I mean can we write a code in JAVA for conversion? If so, what should i use in that Java code?

    Hi
    These blog can help u....
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/srinivas.vanamala2/blog/2006/12/11/edi-basics
    Already discussed thread:
    EDI Conversion
    Re: Seeburger Splitter adapter!!
    Regards
    Santhosh
    Remember to set the thread to solved when you have received a solution

  • Installing seeburger adapter

    Hallo,
    have anybody experiences with installing and running the seeburger adapter? The installing have bad impacts of the whole system? What are the problems?
    Thanks for in advance,
    Frank

    Hi Frank,
    Just see if these links help you in anyways:
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    Regards,
    abhy

  • Where do we configure Seeburger adapter in case of outbound?

    <b>Hello Freinds,
                                 Can you please help me out where do we configure the Seeburger adapter if the sender is EDI ANSIX12...I mean at what point of time we use this Seeburger adapter to convert to XI Specific XML format?</b>

    Hi
    seeburger adapter is used when you want to convert an EDI format into the EDI XML format so that it can be uunderstand by the XI, bcoz XI can understand only the XI.
    seeburger have povioded following adapters
    1.AS2
    2.OFTP
    3.FTP/VAN
    4.X400P7
    the selection of the adapter depends on the requirement.
    Thanks
    Rinku

  • How to configure Seeburger adapter

    Hi All,
              Can you pls guide me on how to configure adapter? and also why do we need mercerator and converstion agent tools along with see burger adapter?
    Can't find any doc on how to configure seeburger adapter!!!
    Can someone pls put light on the messageflow when seeburger and these converstion agents are used?
    Regards,
    Ashish

    Hi Ashish,
    It is similar like other adapters once it is supplied. But take care about security/firewalls settings.
    and also why do we need mercerator and converstion agent tools along with see burger adapter?
    >>>Not a mandatory to use along with seeburger.
    Can someone pls put light on the messageflow when seeburger and these converstion agents are used?Can't find any doc on how to configure seeburger adapter!!!
    >>>Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
    These transformed EDI-XML messages are then converted to EDI specific format using the Seeburger's BIC(Business Integration Converter)adapter. In addition, Seeburger provides adapters like AS2,FTP(EDI specific) and so on to route these EDI messages to external EDI Partners.
    Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
    The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
    1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
    2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
    3. create a one to one mapping between input en output.
    4. export the metadata in xsd or sda format for import in XI
    5. generate an SDA which can be deployed in XI and used as a module.
    Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    Thanks
    Sreeram

  • SeeBurger Adapter PostInstallation

    Hi guys,
    I'm back with another cool doubt...
    We're using SeeBurger AS2 Adapter and we've followed every installation step described in the corresponding manuals.
    I'd like to try a short example, sending a test message to a partner just to check if the installation is working properly. However, I've bumped at the point when I was creating the sender communication channel. When trying to select the AS2 Adapter, there's no signal of it. I can only get all the SAP BASIS Adapters (RFC, Idoc, etc...) list displayed, no signal of AS2.
    So I thought, let me check if the corresponding SWCV is correctly installed.
    After digging up on SLD I've found the corresponding:
         Installed Software Component AS2Adapter and
         Installed Support Package: AS2Adapter
    However, there was something that caught my eye. They both have version '0'. That seemed a bit odd, since evey component has the corresponding version after the installation. Can any of you guys who worked with the Seeburger Adapter check if this setting is alright? Can you guys check your SLD SWCV?
    If you think there's something missing and the SLD setting has nothing to do with it, please give me an idea....
    Thanks a lot in advance.
    Another Question:
    The imported .tpz in the IntegrationRepository 'SEEBURGER_EDI_ADAPTER' responsible for the corresponding AS2 Adapter which I'm trying to use in the IntegrationDirectory corresponds to a Software Component Version with a key from the SLD where we can check the associated GUID.
    Well, I was expecting to see this SWCV in the SLD, but nothing...I've searched all the generated GUIDS in the SLD from ContentMaintenance and there's not there...
    Am I missing any activation?
    Edited by: Gonçalo Mouro Vaz on Apr 17, 2008 12:44 PM

    Hi........
              As far as the version is concerned it has nothing to do with the functioning of that particular SWC in SLD.....its not a mandatory requirement........u can simply import the SWCV in the
    Integration Repository->Tools->Transfer from System Landscape Director->Import Software Component Versions...  and carry on with your work...
    No activation as such is needed.....
    compliment with points if helpful.........
    Thank you.

  • SEEBURGER Adapter Installation

    Hi,
    We are installing SEEBURGER Adapter for this below 3 files required.
    I searched in sap market place and other forms i am not able to find these files.
    SeeXIBaseTools.sca
    SeeXIExtendedTools.sca
    SeeXISolutionIdModule.ear
    Please help the down load  path for file.
    Thanks&Regards
    Praveen Pinapati

    If I am not mistaken you have to buy Seeburger adapters either from SAP or Seeburger. If you have bought it should show up on SAP Marketplace under "My Company's Application Components" in SAP Software Download Center. Otherwise talk to the account manager with whom the company worked for licensing terms.
    Hope this helps.
    Thanks,
    Naveed

  • Forum for SEEBURGER Adapter

    Hi ALL,
               I have been posting quiet a few questions on SDN regarding SEEBURGER Adapter, But I don't seem to be getting much help in SDN. I understand there is not much information avaiable on net about SEEBURGER Adapter. Is anyone aware of any forum dedicated for SEEBURGER Adapter?
    Regards,
    XIer

    Hi Xler
    <b>pls go through these links for more information on SEEBURGER Adapter</b>
    http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
    Need Material on Seeburger Adapters.
    Seeburger Adapter
    Installing seeburger adapter
    http://www.seeburger.com/xi-adapters/
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
    Please see this threads for some more information on this:
    Seeburger AS2 Adapter
    Seeburger
    have a look also on these URl's
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
    http://www.stylusstudio.com/edi/XML_to_X12.html
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
    Details on XI EDI adapter from seeburger
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    Thanks
    Pls reward if useful

  • EDI SEEBurger Adapter

    We are evaluating  XI for ANSI X12 EDI , Have some  EDI Quesitions using SEEBurger Adapter.
    1) Does SEEBurger Adpater has ANSI X12 Enveloping and De-Enveloping capabilities ???  If Yes,how this is configured /Developed.
    2) Does SEEBurger Adapter has capability of generating sequential ISA control numbers by Trading Partner ??? If Yes,how this is configured /Developed.
    3) Can It perform  EDI Structure validation based on the  EDI standard  rules (For eg: Looping structures, Element qualifier restriction list .....)

    Hi,
    Seeburger is a tool which will conver any type of standard EDI format into XML.
    All standard EDi mappings are predefined in seburger,we have to install in XI Server and use that standard mappings.
    Check this links
    SEEBURGER
    http://www.seeburger.com
    Please see the below blogs
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
    http://www.stylusstudio.com/edi/XML_to_X12.html
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
    Details on XI EDI adapter from seeburger
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://www.seeburger.com
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    Regards,
    Phani
    Reward Points if Helpful

Maybe you are looking for