Help! wifi constantly dropping and (looking for network)

I attempted to updated my Macbook air via MacBookAirUpdate.pkg. I was prompted (this is not supported on your system). I am having a major problem with my wifi constantly dropping and searching (looking for network) I was told this update have the fix. I’m very frustrated! help! what do I do?

Hello ronnieluv1960,
The following article provides a host of tips that can help stabilize your WiFi.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Allen

Similar Messages

  • Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
    Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
    There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
    ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
    http://www.stratospherix.com/products/filebrowser/
    Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
    A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
    You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

  • WiFi on and looking for network, on and looking for network

    My WiFi is on and then looking for network and then on again for a little while and then looking for network and so on.
    The result is a lot of waiting...
    Very slow connection.
    Is this normal

    You seem to understand it. I believe that when you tether, you have a separate allowance (I believe mostly it is 2GB) aside from your normal data balance. When you tether, it automatically uses the 3G to tether, not the wifi and the data will be subtracted from your tethering allotment. When you use data on your phone, it is subtracted from your normal data allowance (the pool not reserved for tethering) but only when using 3G. If you are on wifi on your PHONE (not tethering) it won't subtract. Hope that sort of makes sense.

  • Why does airport cycle continually between "on" and "looking for networks"

    I've been trying to find the answer to this for what seems like weeks. My macbook (Lion), my girlfriends macbook pro (Snowleopard) an iPhone 3G and an iPhone4 all seem to be unable to simply keep a steady connection to my WiFi.
    They all connect, but then "looking for network", then "on" and repeat this cycle over and over.
    I know this is effecting the signal and data transfer, because if i do a speedtest, you can see the signal drop off to next to nothing when its "looking for network" and come back to strength when "on"
    This sometimes causes the connection to hang, or disconnect completely. The cycle length seems to vary, but is generally around 5-8 seconds. Then sometimes it is connected for say 7 secs and then looking for 12 secs.
    This is not specific to my network either. My brother who lives 1.5 hours away has the same thing happening on his iMac, and if i log on to his network with my iPhone 4, it shows the same behaviour.
    What the **** is going on?
    My IP has tested stuff from their end, all is fine. If i connect via the ethernet, no problems. They have changed the router twice and are now sending another, but it must be a problem with Apple devices.
    Any ideas?, have i missed the explanation/solution in my searches?
    thanks for any pointers

    It should but then Mountain Lion who knows..
    I recommend you reset the TC and use proper SMB network names.. for TC itself, wireless and hard disk.
    Use fixed channels.. and different name for 5ghz.
    And WPA2 Personal security.
    Did you upgrade install ML?? Or was it supplied with Mountain Lion... ?

  • Airport is connected but Airport menu icon looks like it is looking for networks

    Status in menu bar appears to be disconnected and looking for networks (cycling through the bars), when it is in fact connected. Is that expected? I can't see how good my connection is as a result.

    It is indeed the default - the spinning ball and the message: wi-fi: looking for networks. Your device is NOT constantly looking but only looks again when you click the airport icon in the menu. One may want to change networks or one may have come into the range of a new network that was not previously in the list, you see.
    (This is the case in osx 10.8 whether the box is checked or unchecked pertaining to "asking before joining new networks" in the system preferences.)
    Think of the light which only comes on when the refrigertor door is opened.

  • HT1338 my mac book pro is constantly "looking for networks" while connected using my home network and other wifi systems. how can i stop it?

    Why is my Mac Book constantly "looking for networks" while i am using wifi?

    If it is constantly searching for networks every five seconds or so, then it is the bluetooth - wifi problem discussed on other threads. I find that system preferences > network and clicking at the bottom on the 'Show wi-fi status in menu bar' button to switch it off, and then back onto the menu bar, solves the problem. Sometimes on waking I lose wi-fi completely and have to reload, but that's infrequent.
    Hopefully Apple will come up with a solution soon.

  • My wifi constantly switches between on and looking for other networks

    while I am on my wifi network and internet successfully I notice that it switches between saying WIFI ON and LOOKING FOR OTHER NETWORKS. How do I get it to stop looking for other networks because it is successfully already connected to the right one?

    Hold down the option key and select the Wi-Fi menu in the menu bar. What values are shown for the following?
    PHY Mode
    Channel
    Security
    Signal/Noise or RSSI
    Transmit Rate
    Please do not post the BSSID, as that information is private.
    Now hold down the option key again and select
     ▹ System Information... ▹ Network ▹ Wi-Fi
    Compare the two-letter Country Code with the ISO code for your country. Does it match? The code X0 means that the country couldn't be determined. The code X3 means South America, not otherwise specified.

  • Since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says "Wi-Fi: Looking for networks- and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution?

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

  • When connecting to my wifi I get ! When looking for networks

    When connecting to my wifi I get ! When looking for networks
    I

    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

  • On my iPod touch it says on the settings I have wifi but when I look for the 3 bars there is no wifi please help

    On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. already suggested
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Finder crashes when "looking for networks" - workaround that helps

    I've read through most of the messages about finder crashes, but what's going on in my case I haven't seen. As I have a work around, I thought I should post.
    If for whatever reason the wireless connection pauses or gets interrupted (for example, by closing the lid), the finder hangs in the process of "looking for networks."  Most of the time I can still pull up the dock -- the spinning beach ball only clicks in if I mouse over the top menu bar. Sometimes (but not always) I can quit open applications through the dock before I have to do a hard reset.
    My workaround is this: I turn wi-fi off before I close the lid. When I open the lid, I wait a short time -- 30 seconds, about -- and turn the wireless back on, and this way I can avoid the finder crashing.  If the wi-fi pauses for some other external reason, when "looking for networks" starts up, the finder will hang again.
    It's way past  time that Apple coughs up a permanent fix, but this might help somebody who's having the same problem.  And maybe somebody has a better workaround, in which case, I'd love to hear about it.

    Fire_Bird wrote:
    1. Going into a folder on my external hard drive that contains the installer for divx for mac.
    Divx has been a source of problems with both Tiger & Leopard. See for example Mac OS X 10.5: Finder may not fully "load". If you have installed it, it is probably at least part of your problem.
    then i erased the whole thing, and used the Mac OS X 10.5 install DVD that came with my mom's iMac (still happens)
    This is not recommended. The install disks that come with specific Mac models do not necessarily install the same things or do all the error checks that the retail Leopard installer disk does. (It is also a violation of the software license to install it on another Mac.) If you want a trouble-free, supported installation of Leopard, use only the retail installer or a disk specifically intended for your exact Mac model.

  • Need help to open and look for file by name

    Hi,
            Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
    How can i look for the file by his name ?
    Thx =)

    Hi ,
        Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
    The user ll type the serial that he wants delete ...
    I already figured out what i need guys .. thx for the help ^^
    I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
    Thx ^^

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • When I try to use FT on my MBP, connected to a 24" display, and close the shell, the display camera says it is not turned on. I have looked and looked for a solution. Can someone help? Thanks

    When I try to use FT on my MBP, connected to a 24" display, and close the shell, the display camera says it is not turned on. With the MBP open, FT works fine. I have looked and looked for a solution. Can someone help? Thanks

    Hello BassoonPlayer,
    Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using.  FaceTime will not work if you do not have the proper time zone set up for the location that you are in.  This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly.  By the way, you described your problem very well, which makes it easier for us to help you.  Hope this solves your problem -- if not, post back and I can suggest other remedies.
    Wuz

  • Why does my computer constantly look for networks

    My computer is constantly looking for networks on my wifi

    iCloud, software updates, file sharing all require an active network.

Maybe you are looking for