Help wih adding a second LCD to a G4 Dual 800

i have one monitor connected to the original Video card. would like to connect second LCD using DVI, as the VGA connector does not give me as good of image.
What are my options?
replace original Vid card w/ dual DVI?
add a PCI video card?
do you know what models/brands will work w/ this PowerMac?

Hi
I've always thought powered DVI (ADC) was introduced on the Gigabit Ethernet G4s, like your dual 500. It should be easy to check, as the graphics card has an extra power 'stub' which fits into an extra slot on the logic board, between the main AGP slot and the back of the computer. If all the gold connectors on the Radeon 9000 are seated, I think you must have powered DVI/ADC. If some are 'floating' above the logic board, you haven't.

Similar Messages

Help Wih adding a Title to the Page

Hi - I am trying to give each page a title in the tool bar
where it should allow a title to be put. Dreamweaver 8 will not
allow me to add a title and just removes it. I created a template
that all of the pages are based on and i have inserted the code as
below. I am not a web designer and have no knowledge of html and
this has been put together with trail and error. If anyone can help
resolve this i would be most appreciated.
Regards
Mike

Using Frames? You must set the title tag's value in the
frameset page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ferrarikid123" <[email protected]> wrote in
message
news:e23dsn$24i$[email protected]..
> At the moment when I preview in browser I get a
"untitled document" at the
> top.
> How do I change this to give it the name of the company
instead? Like at
> the
> top of thiswebsite it says "adobe - posting a message -
Microsoft Internet
> Explorer", how do I do that? Thanks!
>

Need help with adding a second pc to my account

Hi guys. I was using an MacBook when first downloaded digital add and purchased a book, I have since moved to a windows 8 machaine and tried to autorise it so I could view my books
I now get a E ADPET REQUEST EXPIERED
How can I view my bought books on my new device?
Thanks

[snip]
I have this so far, and it works as a good high low
game, could someone please help me add in the
following?:
-Player wins $2 with first correct guess, and amount
won doubles with every correct guess.
-Player can opt out and keep his money.You will need another option to your play menu to support the user bailing and keeping his money. You will also need an variable to hold the player's accumlated winnings.
-Player is given the option to play again at the end
of the game.You'll need another loop around the whole thing and you will need to prompt the user for continued play.
-Winnings are accumulated across multiple games.And you'll need to put the aforementioned accumulator outside the loops.
>
Any help would be greatly appreciated.Good Luck
Lee

Itunes page pops up continually on the pc since we added a second ipod. how do I stop the pop up? help/ to the same pc

itunes page pops up continually on my windows Vista pc since we added a second ipod and sync it to the same pc. How do I stop the pop ups??

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

I can't get my ICloud started. Each time i try to sign in..it indicates that theres a problem with my email apple address but never indicates what. I added a second email but the same result. Have changed my password numerous times...no result?????

I have followed the instruction relating to Icloud connection.When i went to system preferences, my Apple address is continually rejected. I have added a second email as suggusted by an Apple site but i still get the same message. Im not told why the Apple ID/email is not accepted when it is accepted in all other Apple sites. I changed my password numerous times to ensure it wasnt the password but to no result. It continued to state that my Apple ID was the problem. I live in Malta,Europe. Have new Apple Mac Pro and Ipod. The annoying thing is that ICloud continually send me the problem notice but do nothing to tell me how to fix it? Can i switch this notice off? Help???????

Welcome to the Apple community Yao.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Adding a second time capsule?

I've reviewed some of he discussion on adding a second Time Machine but two issues arise. The information relates to older Time Machine software and leads to confusion.
I have an Airport Extreme with S/W version 7.6.4 and would like to add a newer Airport Extreme to back up the older one. Reading the suggestions on adding a new TC didn't cover the newer Time Machines and I could find Apple's instructions for doing it.
Somewhere I read that the new TC could be connected to the old TC but forgot the port setup. Also, newer instructions for adding a second TC so both the old and the new acquire the same data could not be found.
Hope This question is clear. Is there help on this?

The network setup is fairly trivial.
Plug TC2 into TC1. (the hardware is Time Capsule.. TC as per your title.. or is it Airport Extreme as per your question..?? Time Machine is software on your computer.. and totally unrelated to the hardware.)
Makes no difference which way around you do it. Plug WAN of the 2nd device into LAN of the 1st device. And setup the 2nd device in bridge.. wireless is up to you.. off or on?? Roaming or not??
As far as backup is concerned.. you need to be clear in the question. And sorry it is a bit mixed up now.
But I can tell you what you cannot do.
You cannot backup to both units at once. You can however setup Time Machine in the computer to backup sequentially to both.
See Q34 http://pondini.org/TM/FAQ.html
The TC itself cannot backup to another TC.
(extreme with hard disk amounts to the same thing.. with caveats)
You can backup one TC to another manually via a computer.. it is slow and I do not recommend it.. if a fault creeps into backup1, you are simply copying said fault to backup2.. AND it is poor for another reason.. Time Machine cannot do it.. you will need another utility eg Carbon Copy Cloner.. and even then you will probably end up backing up a huge amount of data every time.. since TM works so strangely you cannot just backup differences.

How to change security questions after adding a second email address?

I'm at a loss and really really frustrated with Apple for the first time in my life.
I've added a second email address and tried over the last 3 days on my iPad and Mac to change my security questions. There is no option present that I can see that allows you to do this without first entering the answers. (to which I don't know anymore)
I called Apple support (even in english) and every time the call has been dropped.
In all the years since switching to Apple I've always been impressed with the level of customer service. This is the first time that I've felt this level of sincere frustration.
I'm not sure why I have to book a time to speak with someone. Updating or changing security questions, should be a process one can do over the internet. I'm confused either way why questions are necessary if the apple password entered was correct. It's not my bank account; why the need for such extreme security just to download an app paid for by an iTunes card!
Any help or direction would be appreciated!!
Thank you
Kate

Hello there, Kate.
Apologies for your frustration. For your security the existing questions need to be answered before new ones can be created. The following Knowledge Base article provides some additional steps to try if you are unsure of the answers to the existing ones:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Specifically:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Please help. ive bought a second hand ipod nano, when i connect it to my pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
BUT, you have to really oush it in 'til it clicks. I thought it too loose until I tried it. works just fine!!
i get a solved for my own LOL
Ed

Help with adding image onclick

Hey everyone,
I am making a simple game in AS3 and need help with adding an image once they have click on something.
On the left of the screen are sentences and on the right an image of a form. When they click each sentence on the left, writing appears on the form. Its very simple. With this said, what I would like to do is once the user click one of the sentences on the left, I would like a checkmark image to appear over the sentence so they know they have already clicked on it.
How would I go about adding this to my code?
var fields:Array = new Array();
one_btn.addEventListener(MouseEvent.CLICK, onClick1a);
one_btn.buttonMode = true;
function onClick1a(event:MouseEvent):void
    fields.push(new one_form());
    fields[fields.length-1].x = 141;
    fields[fields.length-1].y = -85;
    this.addChild(fields[fields.length-1]);
    one_btn.removeEventListener(MouseEvent.CLICK, onClick1a);
    one_btn.buttonMode = false;
    //gotoAndStop("one")
two_btn.addEventListener(MouseEvent.CLICK, onClick2a);
two_btn.buttonMode = true;
function onClick2a(event:MouseEvent):void
    fields.push(new two_form());
    fields[fields.length-1].x = 343.25;
    fields[fields.length-1].y = -85;
    this.addChild(fields[fields.length-1]);
    two_btn.removeEventListener(MouseEvent.CLICK, onClick2a);
    two_btn.buttonMode = false;
    //gotoAndStop("two")

I don't know where you're positioning the button that should enable/disable the checkbox but for "one_btn" let's just say it's at position: x=100, y=200. Say you'd want the checkbox to be to the left of it, so the checkbox would be displayed at: x=50, y=200. Also say you have a checkbox graphic in your library, exported for actionscript with the name "CheckBoxGraphic".
Using your code with some sprinkles:
// I'd turn this into a sprite but we'll use the default, MovieClip
var _checkBox:MovieClip = new CheckBoxGraphic();
// add to display list but hide
_checkBox.visible = false;
// just for optimization
_checkBox.mouseEnabled = false;
_checkBox.cacheAsBitmap = true;
// adding it early so make sure the forms loaded don't overlap the
// checkbox or it will cover it, otherwise swapping of depths is needed
addChild(_checkBox);
// I'll use a flag (a reference for this) to know what button is currently pushed
var _currentButton:Object;
one_btn.addEventListener(MouseEvent.CLICK, onClick1a);
one_btn.buttonMode = true;
function onClick1a(event:MouseEvent):void
     // Check if this button is currently the pressed button
     if (_currentButton == one_btn)
          // disable checkbox, remove form
          _checkBox.visible = false;
          // form should be last added to fields array, remove
          removeChild(fields[fields.length - 1]);
          fields.pop();
          // clear any reference to this button
          _currentButton = null;
     else
          // enable checkbox
          _checkBox.visible = true;
          _checkBox.x = 50;
          _checkBox.y = 200;
          // add form
          fields.push(new one_form());
          fields[fields.length-1].x = 141;
          fields[fields.length-1].y = -85;
          this.addChild(fields[fields.length-1]);
          // save this button as last clicked
          _currentButton = one_btn;
     // not sure what this is
    //gotoAndStop("one")
I'd also centralize all the click handlers into a single handler and use the buttons name to branch on what to do, but that's a different discussion. Just see if this makes sense to you.
The jist is a graphic of a checkbox that is a MovieClip symbol in your library exported to actionscript with the class name CheckBoxGraphic() is created and added to the display list.
I made a variable that points itself to the last clicked button, when the "on" state is desired. If I detect the last clicked button was this button, I remove the form I added and the checkbox. If the last clicked button is not this button, I enable and position the checkbox as well as add the form.
What is left to do is handle the sitation where multiple buttons are on the screen. When a new button is pushed it should remove anything the previous button added. This code simply demonstrates clicking the same button multiple times to toggle it "on and off".

Help Plz i've blank LCD in Lenovo G530

Help Plz i've blank LCD in Lenovo G530
the unit is working and the power & wireless indicators is on but the LCD is blank
i've allready unpluged the battery and powered the unit with the charger only and plug the battery again but still have the same problem.
so plz advice what to do ?????

Try to plug in external monitor and look if anything shows. Then try to check monitor configuration. Maybe it is switched off...
Regards,
Publius
Lenovo 3000 V200

Adding a second internal HDD on a Satellite A350-20s

I have a Satellite A350-20s.
It is described in its documentation as having the option to add a second internal 2"5 hdd, and a indeed there is a place reserved for it..
The problem is that when I remove the cover to insert the hdd there is no connector.
So, how to do it ?

Hi buddy,
Well, I have even checked the manual of my Satellite A350 and there you can see that the manual shows second HDD slot. But as Paolo30 wrote installing such a HDD is depending on the HDD controller You can only install such a HDD if you have a second HDD connector.
In my opinion all its ok because the manual doesnt mention that adding a second HDD is possible on every notebook. ;)
By the way: If you need more disk space you can use an external HDD, for example 2.5 one. Such HDDs dont need an additional power supply, you need only an USB cable to connect it. ;)

Need urgent help in adding border to a Box

Hi folks,
i need help in adding a border to the box which i am using in my java code.
i have somthing like.. I am not using BorderLayout as my layout Manager. Its all Flow Layout.
Box name;
Box rules;
Box combine;
name = Box.createVerticalBox();
// i need to add a border to this name box which i am unable to do. Please help
rules = Box.createVerticalBox();
// again here too i want to add a border like etched border. Cant do it
name.add(....);
name.add(...);
rules.add(...);
rules.add(..);
combine = Box.createVerticalBox();
//here too i want to add a border
Please help...
thking u.
regds. divya

You can use setBorder() method which Box inherits from JComponent...
check the API for Box for further information, namely the "Methods inherited from class javax.swing.JComponent" part...
- MaxxDmg...
- ' He who never sleeps... '

Does anyone use a second LCD

I was wandering if anyone is using a second lcd attached to their iMac and if so is the display the same or better?
The display on my dell laptop is real crisp and easy to read.
Now before you get on me for having a dell, it is something I have to use for my work.

I'm using my old Apple 17 inch LCD display for a second monitor. It's truly plug and play...except in my case I had to get two adapters: the mini-DVI to DVI and the ADC to DVI. I believe that Apple no longer puts the ADC plugs on their monitors so that shouldn't be a concern if you're considering a newer Apple monitor/display.
At any rate...you'll need the mini-DVI adapter to use a second monitor. I've had no problems at all and the resolution is beautiful. Others have reported the same results with non-Apple monitors.

Second LCD monitor issue with my G5

Ok so I have a used G5 1.6GHz single Powermac.
When I purchased my G5 it didn't have a system installed on it. So I loaded 10.4 onto it and swapped everything from my G4 to the G5 using the G4 as an external Firewire drive. have 2gb of memory inside and it is the correct memory and they have been tested just fine.
Now the second LCD screen I have was working just fine when I had it hooked up to the G4. I have updated my firmware in the G5 to the most current setting. I have reset the PRAM and now I am attempting to figure out if I might have a bad Video card or if my monitor is not working correctly.
I have a Samsung 204B monitor. The issues I have is it blinks off and on when I move things around on the monitor. Sometimes when I open a new window on Safari the screen goes blank. Other times when Im using Photoshop CS2 it will go blank when certain shots come up. It doesn't do it all the time so now I have to figure where to start to troubleshoot this issue.
Thanks,
Ross

I am having what sounds like the exact same problem. I have an Apple Cinema display for my main monitor and a ViewSonic 17 inch LCD for my second monitor.
As with photoguy1010, my second monitor frequently blanks out for up to 2 seconds when I click on something that is ont hat screen or try to move a window. But it is not consistent, sometimes it happens frequently, sometimes less often.
I am sure it is not the monitor because the problem happens with a Samsung 17" LCD monitor also and both the ViewSonic and the Samsung work perfectly with my powerbook. I have several times used the same cable with my powerbook and had no problems.
So it seems to me the problem must be in the G5. Is there anything other than the video card that might cause this?
John

Help wih adding a second LCD to a G4 Dual 800

Similar Messages

Maybe you are looking for