HELP: Windows 7 Ultimate installation issues

Hi,
I have used BootCamp to install Windows 7 Ultimate on my MAC but after partition it goes to a blank black screen and says "No bootable device -- insert a bootable disk and press any key".
I have tried all the tricks I could find on the net like using Startup disk to select the disk but impossible, I can't select the disk. Also taking out the disk and when pressing the option key "alt key" when prompted on Macintosh HD screen putting the disk then.
Any help or ideas please?
Thanks.

Hi,
maybe the solutions in this thread http://discussions.apple.com/message.jspa?messageID=12825664#12825664 can help.
Also, is the Windows 7 disc a bought one or a downloaded one that you burned yourself ?
If the latter, try a reburn with lowering the burn-speed to 2x
Regards
Stefan

Similar Messages

Windows 7 installation issues (0x8007005)

I recently added a SSD in the optical bay of my unibody macbook pro and am currently trying to install a fresh copy of Windows 7 Ultimate x64 on it.
If I go to run the installer from my Windows 7 installation on my disk drive through the optical drive connected through usb I get an error 0x8007005 Windows was unable to create a required installation folder. The same issue occurs when I try to run the installation from an iso loaded on a usb stick. I have tried running the setup through setup.exe /tempdrive:d where d is the ssd with no success. I have uninstalled bootcamp as suggested also.
As an alternative if I run the installer from either bootcamp assistant in OSX or try booting from the cd the screen goes black and it never proceeds with any prompts.
Thanks for the help

I'm not a Windows or Boot Camp expert - although I do run XP on the Parallels VM - but I think that you're going to have to use Boot Camp to install Windows 7, even on a secondary drive. I just don't think that Windows is going to see any drive in a Mac as a c or d drive, even though you may have formatted the SSD in your optical bay for Window.
I've not run the Boot Camp Assistant since 2006 and I'm sure that some things have changed. And I've never tried to install it on a second drive.
You might want to try asking your question in one of the OS forums - I don't know that there's a Boot Camp forum (and I did take a quick glance).
Clinton

Help! Adobe Photoshop 9 - Windows 7 - Installation Issues

upgraded to a new laptop. I can't install a licensed version of Adobe Photoshop Elements 9. I receive this message below. Since its a new laptop, there isn't a previous version installed, and since I'm installing from a CD
it can't be corrupt. How can I install my licensed version of Adobe Photoshop 9 on my new laptop. My old laptop had hardware problems, so I needed to upgrade.

Presumably this is a PRE+PSE bundle with install-media for both products.
It is saying you need to install Premier Elements 9 before installing the PRE9 content.
What happens if you install PRE9, first, rather than PSE9?

Windows 8 Installation Issue on HP Touchsmart 600

I have been having this issue all day long and cannot figure out a fix! I turned to this website because I didn't think that it would be feasable for somone on Microsoft's side to help me, but I have Windows 7 currently installed and am just trying to do an upgrade. It is my work computer, so there is no way that I can do a full restore , so that is out of the equation. When installing Windows 8, it completes the installation as normal, but when it goes to do what I assume is the first boot up, it takes me to this screen and it says, oops, something went wrong during the installation. Windows 7 is being restored on your computer... And it is back to boring ole' Windows 7 for me. Can anybody provide me with some sort of solution or easy fix. I'm sort of computer savvy, so I might understand some things, but if the solution is really difficult, you might have to get basic with me. LOL
Thanks in advance for the help guys, I would truly appreciate it.
Kane W.

Do you have an exact model number? HP TouchSmart 600-????? AIO PC

Windows 7 Installation issues

Hi,
I am sure the answer to my question is out there somewhere but this issue seems to have been a very big one at the launch of Windows 7 and so there is a lot of fluff on the internet about it.
I just put together a brand new computer it contains;
MSI Z77A-G45 Main Board
Intel i5-3750K
8 Gigs RAM in slots 2+4
Corsair 120GB Neutron SSD connected to one of the two Sata 6GB ports
DVD drive connected to one of the 4 Sata 3GB ports
Gigabyte 660 TI OC vid card.
The problem. Whether using a dvd or usb the installation says its missing the dvd driver and will not continue.
I have tried:
Flashing the bios with newest
Putting all updated drivers from the msi site on usb and seeing if they are the drivers that win7 needs
Switching which Sata ports the devices are connected to
disconnecting the dvd drive entirely (driver need still comes up, think it means sata driver)
switching USB port once installation setup loaded (internet suggestion)
I have a valid windows 7 key, but have to install from an iso.
I don't know what else to do other than continue to redownload 3gb+ windows 7 iso's in case they are getting corrupted.
Please help.

If you used the usb to install the os, the dvd driver wouldn't matter.
Re-download the Win 7 from Microsoft then use the tool below to prepare a usb stick. Then boot from the usb and install windows.
Microsoft Shore Win 7 USB/DVD download tool

Jdk-7u3-windows-x64 installation issues

Hi,
I've just download the jdk-7u3-windows-x64.exe and jdk-6u30-windows-x64.exe and tried install them on my window 7 professional service pack 1 platform, but both installations failed with the error message "...\jdk-7u3-windows-x64.exe is not a valid win32 application" and "...\jdk-7u3-windows-x64.exe is not a valid win32 application". However, when I install with the jdk-6u26-windows-x64.exe and jdk-7-windows-x64.exe, it's fine. Please help me how to fix the issue to update the new java package.

Thank you, Gimbal2. It's really strange, but it's true. I give you some screen snipping as following:
1, My system:
[http://farm8.staticflickr.com/7127/6856787896_fc99f16f7d_b.jpg]
2, When install the jdk-7u3-x64
[http://farm8.staticflickr.com/7199/7002892173_2657c97bbd_b.jpg]
3, When install the jdk-6u30-x64
[http://farm8.staticflickr.com/7105/6856777806_41d774bb4e_z.jpg]
4, When install the jdk-7-x64
[http://farm8.staticflickr.com/7277/7002892257_3358af89a6_b.jpg]
5, When install the jdk-6u26-x64
[http://farm8.staticflickr.com/7261/6856777882_57927e0b1e_b.jpg]
or you can find these images at my flckr photostream : [http://www.flickr.com/photos/ideaarchitect]
Edited by: user4200434 on Mar 21, 2012 7:08 AM

P31 Neo V2 (MS-7392) & Windows 7 installation issue(s)

Hi,
I have a P31 Neo V2 (MS-7392) with a QuadCore Intel Core 2 Quad Q9550, 2833 MHz (8.5 x 333) and 2GB of Ram.
On windows xp the system runs and installs fine.
Now, I want to install a legal copy of Windows 7, but the install locks up.
Starting install works, can create the partition, can select OS language etc. Then install starts to copy windows files, still all is fine.
After this bit, the extracting of files starts, and eventually stalls. The whole machine freezes!
After reading through a load of internet pages, I have figured out that all peripherals need to be disconnected (USB, additional PCI cards, etc), which I did... restart of installation same issue.
Doing some more read work... loads of people have issues with the AHCI of the SATA drives. Turn it off, they say.
unfortunately... I cannot find the option to disable the AHCI in the bios... it's just not there!
I hope someone else can help me out on finding the option... but... probably I cannot use this MB with Windows 7, unless MSI comes up with the option to disable AHCI.
Yes, I know AHCI greatly improves performance on the SATA drives, but for now... I'd like to install Windows 7 and start testing it on my system, for future use in the company. You know, testing of all applications written still work, etc, etc.
Help is being appreciated!
Cheers,
Arjan

What is your current BIOS Version?
Quote
Doing some more read work... loads of people have issues with the AHCI of the SATA drives. Turn it off, they say.
unfortunately... I cannot find the option to disable the AHCI in the bios... it's just not there!
I hope someone else can help me out on finding the option... but... probably I cannot use this MB with Windows 7, unless MSI comes up with the option to disable AHCI.
Your are definately on the wrong track here. The P31 Neo V2 has an ICH7 Chipset which does not even support AHCI. But even if it did support AHCI, this would definately not be the cause of your problem because usually, when people have a problem with the Controller in AHCI Mode, the problem is related to Windows XP only (it does not include any AHCI Drivers) or that fact that the generic Vista or W7 AHCI Drivers are not good enough to ensure flawless operation. All of these issues can be solved by integrating the proper Intel AHCI Drivers for the SATA Controller. But again: Your board does not support AHCI but the Intel ICH7 SATA Controller runs in IDE/Compatibility mode. There are no drivers available (or needed) for this operating mode.
Quote
unless MSI comes up with the option to disable AHCI.
All MSI Desktop Mainboards I know of (that support AHCI Mode) have an option to enable or disable this mode in BIOS. Your board does not have such an option because the chipset does not support it in the first place. The cases you read about probably have to do with certain notebooks that are sold with a preinstalled Vista version. The problems usually occur when people decide to install Windows XP without being aware that XP does not include any AHCI Drivers.
Quote
The whole machine freezes!
There are a number of possible explanations for that. A memory problem is often something that causes the system to freeze.
Quote
2GB of Ram
What brand/model are you using?

Satellite A200-23W: Windows Vista installation issue

Hi..
I now that this subject is discussed many times before, but after trying a lot of the solutions of the forum and some of my one, I have reached a level that it makes no sense...
First off all I would like to explain that what i do for a living it has to do with IT and that is what it makes it even more tempting to me.
2 days ago a bought a A200-23W Toshiba. The first thing i always do when i buy a new laptop is to format it and install a clean Windows OS.
I realized after my first attempt that I have to install first of all the Matrix Storage Driver.
I have downloaded the driver from toshiba site related to my model. (Intel Matrix Storage Manager-7.5.0.1017).
I have created a usb with the required files for the driver :
iaAhci.inf,
iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem
from the (F6flpy) folder of the (Intel Matrix Storage Manager) copying them to the root of the USB.
When the "Where you want to Install windows" form at windows vista appear i select load driver, and then by Clicking (Browse), I select the USB as a source for my drivers.
The (Intel(R) 82801HEM/HBM SATA AHCI Controller) automatically appears as a selection and by clicking (Next) the process of driver installation starts.
So far so good..
Now is where the things are getting complicated..
When Vista return to the "Where you want to Install windows" form, even that my system has 2 x 200 GG HDD only one 200 GB HDD appears in the list..
Selections of "New" Partition or "Delete" Partition are disabled.
and even when i click "Next" to the selected HD a windows message appears :
"Windows could not determine if this computer contains a valid system volume"
I would appreciate your help..
Thank you in advance..
George P.

it seems i can't find any installation details about the Robson Package inside the zip file or the European site..
All the readme inside have the same content..
"...This installer does not contain a valid readme
file. Please obtain the valid readme file(s) from the
software site this installer was downloaded from."
And at the europian site the downloaded page :
".....For details please check the included help file"

Windows 7 Installation Issue

Hi there, my apologies if this has been answered somewhere - but I'm unable to find the same issue and a fix.
I'm trying to install windows 7 on my 2012 mba using a superdrive and oem windows 7 disk - not an .iso. Following bootcamp assitant instructions, I've downloaded the drivers to an external usb drive, and after the partition portion the computer shuts down. When it powers on, I get a blinking cursor in the upper left. This does not change after 10 mins of waiting.
I rebooted, holding option and selected the windows cd to boot from - says it's unable to find the boot manager?
Based on all the information I'm finding - it should simply boot into the windows installation?
Has anyone encountered this? Any possible solutions?
Any input would be greatly appreciated.
Regards,
Dan

Just to be clear - is the disk labeled Asus or HP etc or do you know it came with a new PC? Up through Win7 Microsoft sold an OEM version that was supposed to be sold only to people who were building their own computer but lots of resellers sold them to anyone. These so-called OEM disks weren't tied to specific hardware and it is what I own. (I got mine from Newegg along with a mobo, case, and CPU.) If your DVD is of this variety it should work and yes, I'd try making an ISO. I've not installed Win7 with BootCamp on my MBA (though I have on my iMac) and from my understanding it's assumed you're doing it with an ISO. However, if the DVD did come from a PC manufacturer, it is failing because it is looking for something that marks the computer as a specific model from that manufacturer and not finding it.

Sql Server 2008 on Windows 8 installation issue...: SqlEngineConfigAction_install_confignonrc_Cpu64

Hi:)
I try to install ms sql server 2008 standard on Windows 8.1
.Net framework 3.5 is enabled
setup is running by admin.
following errors will appear:
Attemted to preform an unathorized operation:
SqlEngineConfigAction_install_confignonrc_Cpu64
and for next files (when I'm trying with developer editon):
SSISCONFIGACTION_INSTALL_POSTMSI_CPU64
SSISConfigAction_intall_postmsi_Cpu64
SSISConfigAction_intall_ConfigNonRC_Cpu32
Could you help me?
You can find applicable part of the file below:
and screenshot at the end...
> 2014-10-27 00:25:22 Slp: Parameter 8 : 0x2C419A32
>
> 2014-10-27 00:25:27 Slp: Sco: Attempting to write hklm registry key
> SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program
> Files\Microsoft SQL Server\100\Setup
> Bootstrap\Log\20141026_222703\Registry_SOFTWARE_Microsoft_Microsoft
> SQL Server.reg_ 2014-10-27 00:25:27 Slp: Sco: Attempting to write hklm
> registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to
> file C:\Program Files\Microsoft SQL Server\100\Setup
> Bootstrap\Log\20141026_222703\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
> 2014-10-27 00:25:28 Slp: Sco: Attempting to write hklm registry key
> SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL
> Server\100\Setup
> Bootstrap\Log\20141026_222703\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
> 2014-10-27 00:25:28 Slp: Sco: Attempting to write hklm registry key
> SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program
> Files\Microsoft SQL Server\100\Setup
> Bootstrap\Log\20141026_222703\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft
> SQL Server.reg_ 2014-10-27 00:25:28 Slp: Sco: Attempting to write hklm
> registry key
> SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to
> file C:\Program Files\Microsoft SQL Server\100\Setup
> Bootstrap\Log\20141026_222703\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
> 2014-10-27 00:25:28 Slp: Sco: Attempting to write hklm registry key
> SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program
> Files\Microsoft SQL Server\100\Setup
> Bootstrap\Log\20141026_222703\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
> 2014-10-27 00:25:53 Slp: Attempted to perform an unauthorized
> operation. 2014-10-27 00:25:56 Slp: Watson bucket for exception based
> failure has been created 2014-10-27 00:25:56 Slp: Configuration action
> failed for feature SQL_Engine_Core_Inst during timing ConfigNonRC and
> scenario ConfigNonRC. 2014-10-27 00:25:56 Slp: Attempted to perform an
> unauthorized operation. 2014-10-27 00:25:56 Slp: The configuration
> failure category of current exception is ConfigurationFailure
> 2014-10-27 00:25:56 Slp: Configuration action failed for feature
> SQL_Engine_Core_Inst during timing ConfigNonRC and scenario
> ConfigNonRC. 2014-10-27 00:25:56 Slp:
> Microsoft.SqlServer.Configuration.Sco.ScoException: Attempted to
> perform an unauthorized operation. --->
> System.UnauthorizedAccessException: Attempted to perform an
> unauthorized operation. 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String
> subkey, RegistryAccess requestedAccess) 2014-10-27 00:25:56 Slp:
> --- End of inner exception stack trace --- 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String
> subkey, RegistryAccess requestedAccess) 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String
> subkey, RegistryAccess requestedAccess) 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.SqlEngine.EtwSetup.UpdateWmiSecurity(Guid
> guidInstance) 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.SqlEngine.EtwSetup.Install(String
> strInstanceName, Guid guidInstance, String strPath) 2014-10-27
> 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.SetupETW(EffectiveProperties
> properties) 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.Install_ConfigNonRC_Prepare(EffectiveProperties
> properties) 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.Install(ConfigActionTiming
> timing, Dictionary`2 actionData, PublicConfigurationBase spcb)
> 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String
> actionId) 2014-10-27 00:25:56 Slp:    at
> Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String
> actionId, TextWriter errorStream) 2014-10-27 00:25:56 Slp: Exception:
> Microsoft.SqlServer.Configuration.Sco.ScoException. 2014-10-27
> 00:25:56 Slp: Source: Microsoft.SqlServer.Configuration.Sco.
> 2014-10-27 00:25:56 Slp: Message: Attempted to perform an unauthorized
> operation.. 2014-10-27 00:25:56 Slp: Inner exception: 2014-10-27
> 00:25:56 Slp:    Exception: System.UnauthorizedAccessException.
> 2014-10-27 00:25:56 Slp:    Source:
> Microsoft.SqlServer.Configuration.Sco. 2014-10-27 00:25:56 Slp:
>    Message: Attempted to perform an unauthorized operation.. 2014-10-27
> 00:25:56 Slp: Error: Action
> "SqlEngineConfigAction_install_confignonrc_Cpu64" failed during
> execution. 2014-10-27 00:25:56 Slp: Completed Action:
> SqlEngineConfigAction_install_confignonrc_Cpu64, returned False
> 2014-10-27 00:25:56 Slp: Sco: Attempting to get instance feature flag
> UpgradeIncomplete for feature SQL_Engine_Core_Inst, instance
> MSSQL10_50.MSSQLSERVER, machine name NN
>
> (...)
>
>
> 2014-10-27 00:26:39 Slp:
> ---------------------------------------------------------------------- 2014-10-27 00:26:39 Slp: 2014-10-27 00:26:39 Slp: Error result:
> -2068119551 2014-10-27 00:26:39 Slp: Result facility code: 1211 2014-10-27 00:26:39 Slp: Result error code: 1 2014-10-27 00:26:39 Slp:
> Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE,
> machine 2014-10-27 00:26:39 Slp: Sco: Attempting to open registry
> subkey 2014-10-27 00:26:39 Slp: Sco: Attempting to open registry
> subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
> 2014-10-27 00:26:39 Slp: Sco: Attempting to get registry value DW0201
> 2014-10-27 00:26:54 Slp: Submitted 1 of 1 failures to the Watson data
> repository

Hello,
The first “Attempted to perform an unauthorized operation” is related to permissions to the registry keys. Please provide full permissions
on the following registry key:
SOFTWARE\Wow6432Node\Microsoft\MSSQLServer
Please note that SQL Server 2008 requires Service Pack 3 (SP3) to make it compatible with Windows 8.1. Please perform
an slipstream installation of SQL Server 2008 + SP3:
http://support.microsoft.com/kb/955392
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

G500 Windows 7 installation issues

Hi All,
Please could you assist I have a few issues since installtion Windows 7 Professional 64 bit
I am no IT pro but have the following issues.
(even after installing all the drivers on the support website in the correct order as per previous posts).
1. WLAN driver - No Appropriate driver to be installed
2. Under devices; no driver installed under "Network Controller", "USD2.0 CRW"
3. Windows Update - "Windows update cannot currently check for updates because the service is not running... etc"; I have restarted it numerous times and even switched it of manually in cmd.
Thanks a mil

Hi Colin_McDaniel,
Welcome to Lenovo Community!
I’m sorry to hear that there are multiple issues occurred after installing Windows 7 OS (Operating System) in your computer. Please let me know if this is the only OS installed in the computer and have you clean install while installing Windows 7 in the computer.
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Oracle Entitlements Server 10gR3 with Windows env - Installation issues

Hi Everybody,
I am trying to install OES 10gR3 on Windows. while installing admin server, when i click on "Done" (after installing the admin server), one new command prompt open and finally it show me the below error:
Dropping deprecated database constraints, stored procedures, sequences, and views
Run database loader...
Initializing the Administration server for the first time...
Starting "ALES Service Control Manager"...
The ALES Service Control Manager service is starting......
The ALES Service Control Manager service was started successfully.
Waiting for Service Control Manager to initialize...
Waiting for server at url: https://f2tssh1s:7019/ManagedServer.................................................................................................................
+..........failed.+
The requested action wait to URL https://f2tssh1s:7019/ManagedServer failed.
+2010-11-23 16:11:19,531 [main] ERROR com.bea.security.utils.ASISignal - java.rmi.RemoteException: Unable to wait for the server within 120 times+
Service Control Manager failed to start.
You may troubleshoot any issues in console mode by using the WLESadmin debuginit
command to initialize the server for the first time.
--- Then i apply the Admin Patch CP4, and then restarted the admin server then i found the this error (given below)..........
Starting ALES.WLS.f2tssh1s...
The ALES WLS.f2tssh1s service is starting.......................................
The ALES WLS.f2tssh1s service was started successfully.
Waiting for server READY at url: https://f2tssh1s:7017/services/ManagedServer...
failed.
The requested action waitready to URL https://f2tssh1s:7017/services/ManagedServ
er failed.
2010-11-23 17:07:24,562 [main] ERROR com.bea.security.utils.ASISignal - java.rmi
.RemoteException: Unable to wait for the server within 240 times
Admin Console failed to start.
Please make sure all configurations are correct, or check the logs for errors.
---- **I checked the connection of database for admin user and password, everything is working fine.** **Please see the log details (given below) for your reference.**
2010-11-23 16:04:30,656 [main] ERROR com.bea.security.management.databaseloader.AdminPasswordUtil - Error setting admin user password.
<1.0.0-SNAPSHOT-SNAPSHOT nonfatal user error> kodo.jdo.UserException: ORA-00942: table or view does not exist
{prepstmnt 1937054 SELECT t0.id, t0.create_id, t0.create_time, t0.description, t0.loc_id, t0.qualified, t0.upd_id, t0.upd_time FROM dir_curr t0 WHERE (t0.qualified = ?) [params=(String) //dir/RootOrg!AdminDir] [reused=0]} [code=942, state=42000]
     at org.apache.openjpa.kernel.QueryImpl.execute(QueryImpl.java:805)
     at org.apache.openjpa.kernel.QueryImpl.execute(QueryImpl.java:766)
     at kodo.kernel.KodoQuery.execute(KodoQuery.java:43)
     at org.apache.openjpa.kernel.QueryImpl.execute(QueryImpl.java:762)
     at kodo.kernel.KodoQuery.execute(KodoQuery.java:39)
     at org.apache.openjpa.kernel.DelegatingQuery.execute(DelegatingQuery.java:517)
     at kodo.jdo.QueryImpl.execute(QueryImpl.java:98)
     at com.bea.security.management.databaseloader.AdminPasswordUtil.createInitialUser(AdminPasswordUtil.java:136)
     at com.bea.security.management.databaseloader.AdminPasswordUtil.setAdminuserPasswd(AdminPasswordUtil.java:103)
     at com.bea.security.management.databaseloader.AdminPasswordUtil.main(AdminPasswordUtil.java:82)
NestedThrowablesStackTrace:
org.apache.openjpa.lib.jdbc.ReportingSQLException: ORA-00942: table or view does not exist
{prepstmnt 1937054 SELECT t0.id, t0.create_id, t0.create_time, t0.description, t0.loc_id, t0.qualified, t0.upd_id, t0.upd_time FROM dir_curr t0 WHERE (t0.qualified = ?) [params=(String) //dir/RootOrg!AdminDir] [reused=0]} [code=942, state=42000]
     at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingConnectionDecorator.java:191)
     at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.access$800(LoggingConnectionDecorator.java:56)
     at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.executeQuery(LoggingConnectionDecorator.java:843)
     at org.apache.openjpa.lib.jdbc.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:262)
     at org.apache.openjpa.jdbc.kernel.JDBCStoreManager$CancelPreparedStatement.executeQuery(JDBCStoreManager.java:1372)
     at org.apache.openjpa.lib.jdbc.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:252)
     at org.apache.openjpa.jdbc.sql.SelectImpl.execute(SelectImpl.java:359)
     at kodo.jdbc.sql.KodoSelectImpl.execute(KodoSelectImpl.java:33)
     at org.apache.openjpa.jdbc.sql.SelectImpl.execute(SelectImpl.java:317)
     at org.apache.openjpa.jdbc.sql.LogicalUnion$UnionSelect.execute(LogicalUnion.java:407)
     at org.apache.openjpa.jdbc.sql.LogicalUnion.execute(LogicalUnion.java:218)
     at kodo.jdbc.sql.TrueUnion.execute(TrueUnion.java:169)
     at org.apache.openjpa.jdbc.sql.LogicalUnion.execute(LogicalUnion.java:208)
     at org.apache.openjpa.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:94)
     at org.apache.openjpa.kernel.QueryImpl.singleResult(QueryImpl.java:1275)
     at org.apache.openjpa.kernel.QueryImpl.toResult(QueryImpl.java:1212)
     at org.apache.openjpa.kernel.QueryImpl.execute(QueryImpl.java:987)
     at org.apache.openjpa.kernel.QueryImpl.execute(QueryImpl.java:796)
     at org.apache.openjpa.kernel.QueryImpl.execute(QueryImpl.java:766)
     at kodo.kernel.KodoQuery.execute(KodoQuery.java:43)
     at org.apache.openjpa.kernel.QueryImpl.execute(QueryImpl.java:762)
     at kodo.kernel.KodoQuery.execute(KodoQuery.java:39)
     at org.apache.openjpa.kernel.DelegatingQuery.execute(DelegatingQuery.java:517)
     at kodo.jdo.QueryImpl.execute(QueryImpl.java:98)
     at com.bea.security.management.databaseloader.AdminPasswordUtil.createInitialUser(AdminPasswordUtil.java:136)
     at com.bea.security.management.databaseloader.AdminPasswordUtil.setAdminuserPasswd(AdminPasswordUtil.java:103)
     at com.bea.security.management.databaseloader.AdminPasswordUtil.main(AdminPasswordUtil.java:82)
2010-11-23 16:11:19,531 [main] ERROR com.bea.security.utils.ASISignal - java.rmi.RemoteException: Unable to wait for the server within 120 times.
Any quick suggestion/solution would be much appreciated.
Thanks,
User814822

Hi User814822.
I too come accross this issue. But, I didn't installed any patch on top of OES.
I just rebuild the OES schema in database and it started perfectly. Hope it helps.
B/W did you tried to configure external user store to OES like LDAP??
Thanks

Windows 7 Installation Issue Resolved

Hi if anyone is running into problems installing CS4 on a Windows 7 machine (Which some are) there's nothing online about how to fix this, here i've detailed what my problem was and how i managed to fix it. Basically the problem would occour if you've modified your document locations in windows, this would stop the installation in its tracks with no relevant error message given from the installer.
See the blog post for more info

I changed the drive letter to the correct letter which is now E:/ in all of the entries in my Windows registry, I had manually changed this drive letter in windows many months before CS4 was even near the system, so perhaps it was an Windows Installer bug?
It was obviously looking at the wrong path, realising it didn't exsist then just failing the install process.

Java_es-5-websuite-ga-windows-x86 installation issue not setting JAVA_HOME

looks like the installer from java_es-5-websuite-ga-windows-x86.zip is not setting the JAVA_HOME variable correctly.
C:\Sun\JavaES5\DSEE\dscc6\bin>dsccsetup.exe initialize
Failed to create child process ["1/bin/java.exe" -Dsun.directory.clip. [...]

Sorry for the late response. Do you need the other components provided by JES? If not, I suggest installing DSEE from the zip installer which can be downloaded separately. If you have to use JES and the problem is still not resolved, please log a case with Sun.

Help with new installation issues

I just installed CS5 extended, student and teacher edition. It says it's 12.1, which I understand is the same as 12.0.4. Installation is on Win 7 SP1 on a Samsung RC710.
Both 32 and 64 bit versions installed.
Activation seemed OK.
Editing functions seem to work fine, but...
There are several oddities:
System Info... makes it fall over with Adobe Photoshop CS5.1 has stopped working
Phototools 2.5 (my 'freebie') does the same thing
Both the above happen in 32 and 64 bit, with or without OpenGL enabled.
Any ideas?

It would be a good idea to look in the Windows system event log (click Start then type in event log) in the Application log to get the specific information about what module failed. That can often point the finger at what to do next.
Many times a display driver update is a good idea, though display driver problems usually hinge on the OpenGL setting. With a laptop one doesn't have quite the flexibility to download display drivers as one usually has to go through the laptop manufacturer to get new drivers.
-Noel

HELP: Windows 7 Ultimate installation issues

Similar Messages

Maybe you are looking for