Help: Windows CE and WPA
Hi,
I have to install some Windows CE 4.10 devices with Aironet 350 PCMCIA card. On the cards I use firmware V5.41. The ACU is version 2.50.08. I have 1200 Access Points with IOS 12.2(15)JA. Does anyone know how to activate WPA? I can't find the entries on the ACU! LEAP works fine.
Thanks very much :-)
here's the link for configuring wpa on Windows CE:
http://www.cisco.com/en/US/products/hw/wireless/ps4555/products_installation_and_configuration_guide_chapter09186a008015486f.html#1174037
looks like you don't have the CE version that supports WPA.
the book that reference came from says it is for client version 2.30. here's the book reference:
http://www.cisco.com/application/pdf/en/us/guest/products/ps4555/c1679/ccmigration_09186a00801550d6.pdf
Similar Messages
-
Help Windows 2000 and Zen4GB is
Well, I goofed, purchased a (non-returnable) refurbished 4GB Zen and have Windows 2000. I read the specs and that page did not list the OS needed. I am certain many others have had this problem as 2000 is pretty common, and don't know why Creative hasn't handled this software issue, does anyone know how to hook up the Zen 4GB with Windows 2000?
Winamp is a program similar to iTunes that helps you to manage your music on your computer and then sync the music to your device. You can download it for free (just Google Winamp) or there is a Pro version for a small one-off payment. It supports Windows 2000. There's a wealth of information on the website, including a Help section, FAQ and a User Forum. As the program is open-source, it supports plug-ins which modify the software to suit a user's needs - you may be able to find a plug-in in order to use your Zen with it. I use it as I personally prefer it to Creative's own offering and find it'sa powerful but easy program to use.
MediaMonkey is a similar program although I haven't used it personally. Google it and you can download it for free. It has the plug-ins already installed to be able to detect and sync most MP3 players. It is supports Windows 2000 (in fact it supports Windows 95!).
Hope this helps! -
Need Help - Windows Vista and Latest Flash Player
Have Windows Vista and Adobe for viewing video. Just recently I was unable to
view the videos. Pop-up showed that I needed to update to the Flash Player 11. I down loaded
as instructed and was advised that download was successful but still can't view the videos
since the same sign shows up. Have tried to see what I'm missing but without much luck.What is your browser? If IE:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
Problems with Windows VISTA and WPA-2
Hi Guys,
I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
Is that a common problem in Windows Visa (I am using Home Edition)?Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..
-
Help: Windows freezes and iPod empty
Last night (UK) I posted a message considering the problem that My Computer, iTunes and iPod Updater don't recognise my iPod ANYMORE (so it did before).
Now, even worse, when I plug in my iPod Windows XP freezes. My iPod cannot be properly disconnected. When I do so, the iPod gets stuck on "don't disconnect." It takes a long time, before the iPod recognises it's not longer connected to the computer and it loads Menu. However, every file on it is gone (and I cant reload or update it, since my PCI doesnt recognised it anymore).
Strangely, my iPod Info says that there is just about 20 gig of free space in it. Although there are no files on it anymore.
So what is failing: my computer or my iPod???
Any help welcome!Since the iPod seems to be recognised on other comps then it does sould as if the problem is with the comp rather than the iPod itself.
Make sure the iPod is fully charged before you start.
Try creating a new user account on the comp which won't recognise the iPod and use that account.
Go through the apple 5R's, be sure to uninstall iTunes and the iPod software with the iPod disconnected from the comp and when you reinstall do so with the iPod disconnected and only connect the iPod when the software prompts you to do so or after the install has completed. You might like to reboot the PC after you've uninstalled the iTunes and iPod software and reboot again after you've completed the reinstall. Follow apple's instructions to the letter.
If you still don't get it to work you will need to consider reinstalling XP and starting over with a clean install.
Hope that helps. -
Oracle Help Window Hides Behind App
Hi,
I'm using Oracle help 4.2, although this problem occurred in 4.1.16 as well. JDK v1.4.1.
When I select help from our menu, the Help window displays, and then immediately jumps behind our application. If I move the mouse slightly after selecting Help, or if I use F1 the Help window stays on top like it should. The application is an MDI app and an internal frame is active when Help is launched. Not sure if this is related in any way, but I mention it because it is the only thing I can think could be different. I'm not doing anything tricky with Oracle Help. This is how I am launching the window:
* Displays the help browser for the given topic.
* @param topicKey
public void showTopic(String topicKey) {
// Default to the main help screen. This is shown when there is no
// frame dislayed.
String helpKey = HELP_MAIN_KEY;
// Validate the key coming in
if ((topicKey != null) && !("".equals(topicKey.trim()))){
helpKey = topicKey;
// Show the selected topic
try {
helpObject_.showTopic(helpSet_, helpKey);
} catch (Exception e) {
// Should never happen
JOptionPane.showMessageDialog(FrontPage.getInstance(),
ERR_2, TITLE, JOptionPane.ERROR_MESSAGE);
At this point I'm completely at a loss for why this occurs. Anyone have any ideas?
Thanks in advance,
Daniel SpiessThere are lot of options to customize the behavior of jQuery dialog. You can set height as auto, however you need to specify some fixed width depending on the content.
$( "#TEST_POPUP" ).dialog({ height: "auto", width:500 });Default for height is auto, so you may not need to specify it.
See http://docs.jquery.com/UI/Dialog for more info.
Regards,
Hari -
Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!
Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?
-
Could use help dual booting windows 8 and ubuntu 13.04
I have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
partitions
OS'sI have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
partitions
OS's -
I am trying to polish an application, and find that I cannot seem to reliably control which of the label or caption text appears in the context help window because I don't understand what rules are in place to determine which should appear. It seems like if I reate a named constant, then use it's right click menu command "Create Indicator" I get a control with only a Label (as long as I don't add a caption). This then appears in the context help window as the label name followed by the description text (after entering some description text). But if I add a caption, the label name is shown in bracket
s which is a 'feature' I would like to avoid, because I have certain controls where I would like to use a descriptive variable name on the block diagram side without using so much space on the front panel. It seems like there is no way to avoid showing the Label name in the context help for a control/indicator. Is this true?
I thought the purpose of having a seperate caption was to make the text that appears with a control programmatically controllable, but if that control is not extended to what appears in the context help window, it limits the usefulness of the caption and forces me to re-consider some Label names. However, the problem goes deeper than that because then even when I make the label and caption exactly the same, or if I delete (via a select caption text-backspace or select caption text- delete key .. sequence) the caption for a control, the label name in the context help window still appears in square brackets!
Can I have complete control over the context help fo
r a particular control (or has anyone found a third-party context help solution that functions compatibly with LabVIEW 7 in a built application that they will be so kind as to recommend?)
I have used LabVIEW for three years, and I am now using LabVIEW 7.0.Sorry for that.. I was changing the text of my question and didn't read carefully enough in the preview stage. I wanted it to read "What determines whether the Label name and/or Caption appears in the context help window?"
-
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
the help pagers just bring me around in circles. the ipod doesn't show up in system devices under the busses. i've tried just about everything. Im using windows xp at home and though maybe it was because of that. so went to a relatives and used a brand new lap top avus with windows 7 and it wont show up here either. When i got the ipod a few days ago from a third party the only screen i could get to come up was a picture of a usb cord with an arrow pointing towards the itunes logo. I downloaded i tunes and couldn't get it to change. brought it to at&t store today they hooked it up with my usb cord to thier computer and suddenly the menu screens work and i could even get online with it yet when i try to hook it up to one of my computers it doesn't show up anywere where can i go to get this fixed and fixed quick jumping around the apple help pages have put me in a foul mood and im sick of it two days spent trying to get it to show now. im sick of waiting around i need help asap so i can return this **** thing if it turns out it is broken somehow..which i dont think it is.
What gen iPod (3,4?) did you buy?
-
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.
Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update serverTry this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Maybe you are looking for
-
could you tell me the name of a all in one printers that i can use on mac and pc, can i buy it in apple store
-
Hello guys! I am currently working on the following business scenario: My client wants to use SEM BCS to prepare consolidation following 2 different accounting principles (lets say P1 and P2). These 2 principles have common treatments: conversions,
-
Photos not migrating by books from iPhoto
Hi all, I've installed Photos, and gone through the migration process... but none of my projects and books have migrated! :-/ Any suggestions are welcome. Thanks. Regards, Jeppe iPhoto 9.6.1 Photos 1.0 MacOS X 10.10.3 Mac Mini (late 2012)
-
I am new to software development and I would like to beginning programming in Cocoa. I have downloaded Apple's Objective-C 2.0 Tutorial from the Developer Connection website, and I plan to read it before I begin reading a Cocoa tutorial written by Aa
-
the option to synchronise google mail in the preference pain of my address book does not exist....all i have is the option to synch with yahoo....how do i add google mail...anyone...