HELP! 'Wireless Network Connection doesn't have va...

'Wireless Network Connection doesn't have valid IP configuration'.
The problem that I'm having on multiple devices gives me this message on my desktop PC. No devices in the house can connect to the internet apart from xbox systems weirdly enough. I have 3 xbox's in the house, two 360's and one xbox one which all connect perfectly fine.
No computers will connect and no mobile phones. The router is shining a blue light indicating that nothing is wrong. I have been searching for a solution for hours now and nothing has worked. If someone has a suggestion please let me hear it.

Turn off smart setup.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Split the wireless bands.
http://bt.custhelp.com/app/answers/detail/a_id/44798/related/1
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Bootcamp Windows 7 Wireless Network Connection: No Valid IP Configuration

I just bought a new 13" MBP and have installed Windows 7 Ultimate via Bootcamp 5.0. I installed the Windows Support Software that I had previously downloaded via Bootcamp Assistant on Mac OS. Although the Wireless Network Connection asked for my network key and connects to the network, I cannot access the internet. The troubleshooter find this problem: "Wireless Network Connection" doesn't have valid IP configuration. I am using my old Dell computer and it is connecting to the wireless properly and my MBP can connect on Mac OS, so I don't think it's a router issue. Here are the things I have tried so far to resolve this issue, but none have worked:
Uninstalling the Broadcom Network Adapter driver, restarting the computer, and reinstalling
Repairing the Windows Support Software with the Bootcamp 5.0.5033 Support Software Update downloaded from www.apple.com
Uninstalling the Broadcom Network Adapter driver, restarting the computer, and reinstalling the driver from Bootcamp 5.0.5033
ipconfig /release gives an error about disconnected media.
ipconfig /all says:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Alise-PC
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 68-5B-35-7C-FC-A9
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter
   Physical Address. . . . . . . . . : A8-BB-CF-1B-54-3A
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::1d6a:752c:62e3:d01b%15(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.208.27(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 313048015
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-C6-A6-83-A8-BB-CF-1B-54-3A
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Bluetooth Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
   Physical Address. . . . . . . . . : A8-BB-CF-1B-54-3B
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{C38C3280-5682-4E5A-A978-9DD1A96CDBFF}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{ABCE958D-5FDB-4D1E-86F5-ECF01B80E01F}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{749630EF-9B2E-4DF1-9B6F-B38A5237F81A}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Please help!

Did you find a solution for this? I have exaclty the same problem.
But I could temporarily solve it by setting an IP, gateway, dns etc manually. But that will only work in my current wifi-network.
I can't even get internet sharing from my iphone

Conflict with WRT160N and Windows Wireless Network Connection

I have a WRT160N router connected to a Verizon FIOS cable modem with five computers (all Windows based) wirelessly connected to the N router. Four of the computers auto detect the N router connection when the computer starts up using Windows Wireless Network Connection and operate well. One of the computers, which is the only one running Easylink for router configuration, will not connect through the Wireless Network Connection. I have to use Easylink to manually connect. The WNC gives a msg that Windows cannot configure this wireless connection and to configure the wireless connection using Wireless Zero Configuration service. When I configure WZC correctly the WNC sees all available networks and allows me to select the Advanced Wireless checkbox to allow Windows to connect to the wireless network. However, when I reboot the computer none of the configuration parameters are saved and I am back to manually connecting using Easylink and going through the entire process again. Any suggestions? Thx

Uninstall the EasyLink and connect manually. I think EasyLink 3.0 or later is coming soon ..
For information on upgrading the firmware on the linksys routers :
http://linksysfirmwares.googlepages.com/upgradingfirmware
For information on wireless security :
http://linksysfirmwares.googlepages.com/wirelesssecurity
C | EH
linksyshelp.blogspot.com

Airport Express! wireless network connection promp need Help!

First time user cant hook up to my wireless network just bought airport express to extend my my network but I keep on get an error say that my wireless network connection is valid any help anyone please on the brink of giving up!

Hi, yonhtna. Welcome to the forums!
Would you mind answering a few questions? I need a little more information about your network setup and about the exact nature of the problem.
1) What type of router is your main router?
2) Do you plan on using the Express to extend the range of your network, or are you only going to be using it for AirTunes or printer sharing?
3) When and where do you see the error message? If possible, can you provide the exact wording?
4) Is AirPort Utility able to find the Express?

Local area connection doesn't have valid ip

I have a Touchsmart 320-1030 that belongs to a friend. Everything was working fine then for no apparent reason connection to the internet was lost. They have contacted their isp and gone through all troubleshooting with them. All other equipment (ie laptops, phones, ect..) connect and work fine. The windows troubleshooter offers no help and says local area connection doesn't have valid ip is the reason it won't connect. This is true when trying to connect wired or wireless. I piddle with fixing computers as a hobby so they have asked me to see what I can do if anything. I have been Googling, reading, and trying everything I have found for three days and have had no luck. So I am hoping I can find some help here. I have never seen anything like this. It may be a hardware problem and I'm not smart enough to realise it. But I need to know that too.
System -
Touchsmart 320-1030
Win 7 Home Premium
4 gigs ram
What I have done -
Brought system to my house to see if it will connect, it does not so I am working on it here.
I have rebooted modem & router
Connected systen directly to modem bypassing router
Uninstalled and allowed windows to detect and reinstall network drivers
Updated network drivers
Updated Bios
Tryed to inatall orginal drivers from support but they wont install
I have changed from detect automaticly to use this ip in tcip ip4 and used ip I know is good to my router -
When I did this last thing the wireless did see my network but the network 2 thingy that it makes still won't connect even tho when I search for connections the list says I am connected to my network. The little thing by the clock says not connected. Also the ethernet adapter says unknown public network when I do that. Wireless says unknown public network or connection when I have it detect ip automaticly.
Network discovery will not turn on in homegroup, nether will the services assocated with it.
I have run tweaking . com firewall repair
I have uninstalled avast security, there are no other av or firewall programs
I have uninstalled bonjoir because I read that causes a conflict of somekind
I have run tweaking . com windows repair ( just in case because it looked liked the firewall repair was doing something).
I have run sfc /scannow and it found and fixed some things, ran it again and it found nothing.
I am pulling my hair out with this one. Please help.
Thanks for your time.

SSCRSR1, welcome to the forum.
Wifi problems can be very difficult to diagnose. Here is the Wireless / Networking / Internet section for the computer. Read the Wireless area to see if there is any help with the problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

Wireless networks connections are not showing up

I have a 3000 C200 model with windows 7 installed. From a few days the wireless network connections are not being detected. The networks are being detected in my other laptop. Can someone please help me in resolving the issue.

Hi Sandy2246,
Thanks for posting and welcome to the community. Was reading through your post and was wondering if you try reinistalling the driver listed below. Please ensure to choose the correct drivers that matches your machine wireles card.
Networking: Wireless LAN
Driver
Operating System
Released
Broadcom Wireless LAN driver for Windows Vista (32-bit) - 3000 C200, Lenovo N100 ... Learn more
Version
: 5.60.18.8
Broadcom Wireless LAN Driver
Read me
Windows Vista
14 Dec 2009
Broadcom Wireless LAN driver for Windows XP - 3000 C200, N100 ... Learn more
Version
: 4.170.75.0
Broadcom Wireless LAN Driver
Read me
Windows XP
24 Mar 2009
Intel wireless 3945abg driver for Windows XP - 3000 C200, N100 ... Learn more
Version
: 10.5.1.59
Intel Wireless 3945abg driver
Read me
Windows XP
04 Oct 2006
Wireless LAN (Intel abg) driver for Windows Vista (32-bit) - 3000 C200, Lenovo N100 ... Learn more
Version
: 12.4.3.9
Intel Wireless LAN (abg) Driver
Read me
Windows Vista
24 Aug 2009
Hope this helps.
Please do post back your results.
Regards

More than one wireless network connection

Is it possible to keep more than one wireless connection installed for my Deskjet 3000 (J310 series) in Devices & Printers? I am using Windows 7 Pro. For example when I travel to my dad's house I take my printer with me and he has a wireless cable connection. I have to go through the setup to get the printer on his network, then when I come home I have to go through the process again to get back on my network. I would like to be able for it to keep BOTH so all I have to do is select one or the other and not go through setup again!
Hope there is a solution!
Patti

Hello pranderson
Unfortunately the printer can only store one network settings at a time. I'm not sure of any printer than remembers multiple network settings either.
Unless its a mobile printer, printers are not typically moved between different networks.
Is there a particular reason for moving the printer? I'm just curious and hope I have been informational.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Netsh does not work to set IP address of "Wireless Network Connection"

On Windows 7 Professional
This set of commands work for configuring the "Local Area Connection"
netsh interface ip set address name="local area connection" static 74.94.87.157 255.255.255.248 74.94.87.158 1
netsh interface ip set dns name="local area connection" static 8.8.8.8
netsh interface ip add dns name="local area connection" 68.87.77.130 index=2
BUT for the WiFi connection, this command errors with this message "ELEMENT NOT FOUND"
netsh interface ip set address name="Wireless Network Connection" static 74.94.87.157 255.255.255.248 74.94.87.158 1
BUT the 2 following dns commands DO work for the Wifi Connection.
netsh interface ip set dns name="Wireless Network Connection" static 8.8.8.8
netsh interface ip add dns name="Wireless Network Connection" 68.87.77.130 index=2

I FOUND A SOLUTION
I manually renamed the interface from "Wireless Network Connection" to "Wifi"
Then when I use "WiFi" in the command line, I no longer get the
ELEMENT NOT FOUND error.
I have no idea why renaming the interface works . . as shown on original post above, "set dns name" command worked without the name change, but the "IP set Address" did not work.
Anybody know what this is about ?

2nd Computer Requires a Manual Wireless Network Connection Setting on Powerup

2nd Computer Requires a Manual Wireless Network Connection Setting on Powerup
On power-up, my 2nd computer, a 3 yo IBM R51, requires that I open the Network Connections window, then set the Wireless Network Connection Properties under the Wireless Network Tab, clicking on "Use Windows to configure my wireless network settings", before the automatic connection launches to the WRT150N v1.1 router signal.
I just bought the router and have the latest firmware.
My primary computer does not require the above settings change every time.
Is there a selection I can make so this is automatic on power-up or restart of my 2nd computer?

It was already set to automatic on both extended and standard tabs.
For a good measure, I set it to disable, applied, then reset it to automatic and applied again. Still does same thing.
I notice that if I double click on the small icon for the Intel ProWireless Network Card, I get a Wireless Connection Status Window.
This window has a Wireless Settings section where it seems to have a possibly obsolete "Current Location Profile" called ssnetwork (the name of my old network on my old D-Link router that I just changed out for the Linksys.
Anyway, the Network Name (SSID) field is now blank but when it first came up, it had the new name of the network I'm using.
Do you know how I access this "Current Location Profile" so I can edit it and possibly enter my new network name?
There is a button at the bottom of the screen called "Modify WLAN Settings" that I click but nothing launches when I do so.
Now that I manually did the connection setting, my network name appears in the "Current Location Profile."
Ted

Getting this messg on Factime "could not sign in, check your network connection", but I have Wifi activated and working with internet??

Getting this messg on Factime "could not sign in, check your network connection", but I have Wifi activated and working with internet?? what can I do?

Usually it's because you are not making internet connection via wifi. Open Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Win7 Home Premium - systray Wireless network connection icon?

Hi,
My home wireless connection is running fine and I do not have my Ethernet cable plugged in.
In the systray part of the taskbar, there used to show a Wireless network connection icon - a little graphic icon that looked like 5 vertical bars side-by-side, with bars increasing in height, left to right. That icon is no longer in the systray and
it appears to have been replaced by the "wired" icon - a little square with a tiny picture of a plugger on its left side. And since I don't have my Ethernet cable plugged in, there's a little red "x" on the wired icon. I don't
know what I did to cause the wired icon to replace the Wireless network connection icon in the systray. Any idea how I screwed this up and how to put things back again?

Hi cwr64,
It might be caused by netsh command using. Please try following methods
Method1: Uninstall all “6to4 Afapter” and “isatap” device in device manager.
Right click this computer->Properties->Device manager->View->show hidden devices
Right click and uninstall all “6TO4 Adapter” and “isatap” devices in
Network adapters.
Method 2
Please try to uninstall all your network adapter driver and reinstall them again. Then restart your computer check if the icon comes back. It might be caused by netsh command using.
Note: backup or download your adapter driver before removing the drivers from device manager.
Regards

How do I activate iMessage when it tells me that I need to check my network connection but I have full internet connection?

How do I activate iMessage when it tells me that I need to check my network connection but I have full internet connection?

iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues

Got a new MacBook pro but for some reason I can't connect to my schools wireless. It doesn't have a problem connecting to any other wifi. My schools network is unsecured all you do is login with your username and password but the window never loads

I jus got a MacBook pro and Im having trouble connecting to my schools network. It is not secured and only requires to login with school id. A Window pops up to sign in but it never loads anyone know why I'm having this problem? Doesn't have a problem connecting to any other wifi

"This is a flaw in OS X Lion. It does not want to connect to open WiFi that has a login page that open in a browser."
Nonsense, no problems logging in at sites that you mention. I use OpenDNS servers. For the OP try:
System Preferences>Network>Advanced>DNS. In the left side column click on the + sign and insert the following:
208.67.222.222
208.67.220.220
Then click OK, then click Apply.

HP 175nw Problems with Wireless Network Connection - Mac OS X 10.8.3

Please help!
I have an HP 175nw, from one day to the next it decided it was no longer going to connect to the wirless connection.
I run a Mac on 0S X 10.8.3.
I can't find the installation software (the whole software not just the driver) on the web and the CD is worthless b/c this is a Mac.
I installed the printer on my windows laptop and it works fine, it connected to the wireless network using the setting sets on my laptop, it now prints wireless no problem, but not with the Mac.
I have plugged the printer directly into the Mac but the Mac doesn't even seem to recognize it. The printer shows up on my printer list but when I try to print or scan from it the Mac says the printer is offline.
I need this printer/scanner for work desperately, Any ideas would be greatly appreciated.

First, download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Next, download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-107394-1&cc=us&dlc=en&lc=en...
What router are you using?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HELP! 'Wireless Network Connection doesn't have va...

Similar Messages

Maybe you are looking for