Help with 1...n mapping.... help.. important

Hello,
Scenario : IDOC-FILE
IDOC  to multiple recievers using DEBMAS
I have IDOC on the source side and
"Sold to party",
" ship to party" and
"bill to party"
on the destination end
The requirement is that if the sender IDOC has multiples lines of Sold to parties, then customer bill shud also contain multiple lines with account number different for each line.... this would require 1....n  communication
anybody who did similar scenario please help me...

hi venkat,
you will have multiple receiver determinations + receiver agreements for multiple receivers....
no sender agreement ...since you have IDoc on the sender side...
thr will be a single 1....n Mapping  .....Assuming that all the receivers have same inbound interface
In Mapping....map the occurence of the source node with the node to be generated  in the target ( The occurence will then  be handled) map the fields under the corresponding nodes directly....
Regards,
Sushil.

Similar Messages

  • How can i open my imac with mountain lion in 32 bit. With the Mountain Lion, some important softwares are not functioning. Please help !

    How can i open my iMac with mountain lion in 32 bit. With the Mountain Lion, some important softwares are not functioning. Please help !

    Thx for yr reply. maybe i don't express myself very well. i know ML is 64 bit system. and it does not open up my VPN connection (the VPN connection i am talking here is Cisco and it is only in 32 bits) . i was wondering is there a way my macbook air 11 inch first generation can turn back into its original operation system, so that i can use the VPN connection. THX

  • Help importing Workshop 8.1 project into Workshop 10

    Hi,
    I'm trying to import a workshop 8.1.4 project into workshop 10 using the "Import > Other > Workshop 8.1 Application " wizard.
    I select "myapp.work".
    I then click on "Target Runtime > New" button to make sure my project is pointing to the 8.1 runtime and not the 10.1 runtime.
    From the "New Server Runtime" wizard, I select "Weblogic 8.1", and then click on "next". I then select the 8.1 Application Server Directory, in my case it's "e:\bea814\weblogic81"
    I then click on "Finish",
    Now the problem:
    I get brought back to the "Application Import" wizard, but the 8.1 Runtime is still not installed. I dont get an error message, and the eclipse .log file is empty...
    PLEASE HELP.
    Thanks.

    Workshop 10.0 only supports WLS 10.0. Workshop 10.1 supports 8.1, 9.0, 9.1, 9.2 and 10.0, but support for 8.1, 9.0 and 9.1 is limited to standard J2EE technologies. Controls, NetUI, EjbGen, WLS Web Services, etc. are only supported on 9.2 and 10.0.
    If you have a Workshop 8.1 app that uses any of above features, then you would have to migrate to WLS 9.2 or 10.0 in order to use Workshop 10.1 with your application. The import process will upgrade your project metadata and make changes to your source code such that it will work on the newer version of WLS.
    If you have a Workshop 8.1 app that only uses straight J2EE technology, then it would be possible for you to move to Workshop 10.1 while continuing to target WLS 8.1. The catch is that you have to do a bit more work manually to make that happen. There is no upgrade wizard for this case, but you can create new projects in Workshop 10.1 that target WLS 8.1 and copy your existing Workshop 8.1 source files into the new projects.
    Hope this clarifies what is and what isn't possible.
    - Konstantin

  • Help Importing New Pictures & Text in Document

    Dear Adobe Customer Service,
           I just purchased your servcie and would greatly appreciate your help importing new photos and text in the document that has been changed from pdf to docx.  I have a Mac and when attempting to change or update photos or text in the document the alignment is totally off and will not allow.
            Can you please help?  Please call me and walk me through the process.  If this matter cannot be resolved I will need to cancel my subscription and get a full refund.
    Thank You
    Dr. Joy Macci
    214-223-3738

    OK, if this is a template file and you are trying to customize a single word, or a list of words that are always in the same places (I was thinking at first that you want to change words in one part of a paragraph if some other trigger word appeared), like a form letter that needs to have the recipients name inserted, then you can use either a custom text variable or Data Merge.
    For one-off production the variable is probably easier -- just redifine the text string  each time you make a new copy, but if you have a list of words and want to make a copy for each one in a single session, Data Merge would be more efficient.

  • LabVIEW Help Important Information Copyright page broken links

    None of the files or folders listed in the LabVIEW Help >> Important Information >>Copyright page are existing in my W7 64 bits LV 2013 installation:

    It's been a while since I installed 2013...
    But since you are mentioning it, I get the same page for LV 2014 Help, and sure enough, none of it matches anything I can find in the Program Files/National Instruments folder (obviously since it is shared by all versions).
    I HAD an installation error when installing 2014.

  • I need help importing navigation bars and rollover buttons from fireworks?

    I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
    Thanks

    In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons. 
    #1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing.  After 2-3 times of this, it gets old in a hurry.
    #2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
    #3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
    That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
    Nancy O.

  • Urgent Help Import

    i need help importing my music library from i tunes to my new zen library..can this be done or have i blown a fortune. thanks in advance

    Do you know the formats of your music files?

  • Placing Word docs with custom style mapping

    I am trying to place Word 2007 docs in InDesign CS3 using custom style mapping.
    When I place the Word doc, InDesign creates a whole new set of styles with the correctly mapped new names but with the Word style definition. It records no name conflicts with the my already existing styles of the same names. Each of the new styles has the disc icon next to it, showing it was imported.
    If I delete each of the styles I can replace it with my original InDesign style, but isn't the point of style mapping to eliminate that step?
    Thanks.

    This issue is now solved in the 6.0.4 update. See the release notes for item #2335625.
    An important update to the InCopy and InDesign products has been released today!
    To install the update, choose Help > Updates from any Adobe CS4 application, or navigate to the Adobe Updater and launch it:
    Mac: /Applications/Utilities/Adobe Utilities/Updater6/Adobe Updater.app
    Win: C:\Program Files\Common Files\Adobe\Updater6\Adobe_Updater.exe
    You can also download the updates from Adobe.com at the following locations:
    InCopy Mac: http://www.adobe.com/support/downloads/product.jsp?product=30&platform=Macintosh
    InCopy Win: http://www.adobe.com/support/downloads/product.jsp?product=30&platform=WIndows
    InDesign Mac: http://www.adobe.com/support/downloads/product.jsp?product=31&platform=Macintosh
    InDesign Win: http://www.adobe.com/support/downloads/product.jsp?product=31&platform=WIndows
    Release notes are here: http://www.adobe.com/go/id6_readme_en

  • Problems with Java DOM Mapping

    Hi Experts,
    as part of my diploma-thesis I have to write a java DOM-Mapping, which mapps the following incoming message:
    <mt_MappingOUT>
    <set>
    <set_Element_01>...</set_Element_01>
    <set_Element_02>... </set_Element_02>
    <set_Element_03>... </set_Element_02>
    <set_Element_10>  </set_Element_10>
    </set>
    </mt_MappingOUT>
    to the following outgoinig message:
    <mt_MappingIN>
    <TABLE>
    <item>
    <item_FIELD_01>  </item_FIELD_01>
    <item_FIELD_10>  <item_FIELD_10>
    <i/tem>
    </TABLE>
    </mt_MappingIN>
    I am not a very experienced Java-Developer. You can see my code down there, which I tried to implement according to some bloggs; unfortunately the result is not what I want to have
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.InputStream;
    import java.io.OutputStream;
    import java.util.Map;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.ParserConfigurationException;
    import javax.xml.transform.Transformer;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.dom.DOMSource;
    import javax.xml.transform.stream.StreamResult;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import org.w3c.dom.Text;
    import org.xml.sax.SAXException;
    import com.sap.aii.mapping.api.StreamTransformation;
    import com.sap.aii.mapping.api.StreamTransformationException;
    public class DOMMAPPING implements StreamTransformation{
         public static void main(String[] args) throws Exception
              try
                   FileInputStream fin =
                        new FileInputStream("C:/mt_MappingOut.xml");
                   FileOutputStream fout =
                        new FileOutputStream("C:/target.xml");
                   DOMMAPPING mapping = new DOMMAPPING();
                   mapping.execute(fin, fout);
              catch (Exception e)          {
                   e.printStackTrace();
    public void setParameter (Map param) {}
    public void execute (InputStream in, OutputStream out)
         throws com.sap.aii.mapping.api.StreamTransformationException {
              DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
              Document documentIn = null;
              DocumentBuilder builder = null;
              try {
                        builder = factory.newDocumentBuilder();
                   } catch (ParserConfigurationException e1) {
                        e1.printStackTrace();
              try {
                   Element itemNode = null;
                   NodeList[] list_f=new NodeList[10];
                   Element[] field=new Element[10];
                   documentIn = builder.parse(in);
                   Document documentOut = builder.newDocument();
                   Element rootNode = documentOut.createElementNS("urn:agrp:xi:geissseb","ns0:mt_MappingIn");
                   documentOut.appendChild(rootNode);
                   Element tableNode = documentOut.createElement("TABLE");
                   rootNode.appendChild(tableNode);
                   NodeList list_Set=documentIn.getElementsByTagName("set");
                   System.out.println(list_Set.getLength());
                   for(int j=1;j<10;j++){
                        list_f[j-1]=documentIn.getElementsByTagName("set_ELEMENT_01"+j);
                list_f[9]=documentIn.getElementsByTagName("set_ELEMENT_10");
                   //NodeList list_f01=documentIn.getElementsByTagName("f01");
                   for (int i=0;i<list_Set.getLength();i++)
                        itemNode=documentOut.createElement("item");
                        tableNode.appendChild(itemNode);
                        for(int k=0; k<10;k++){
                             Node f=list_f[k].item(i);
                             f=f.getFirstChild();
                             String str_f=f.getNodeValue();
                             Text text_f=documentOut.createTextNode(str_f);
                             field[k]=documentOut.createElement("item_FIELD_"(k1));
                             field[k].appendChild(text_f);
                             itemNode.appendChild(field[k]);
                   TransformerFactory tf = TransformerFactory.newInstance();
                   Transformer transform = tf.newTransformer();
                   transform.transform(new DOMSource(documentOut), new StreamResult(out));
                   } catch (SAXException e2) {
                        e2.printStackTrace();
                   } catch (IOException e2) {
                        e2.printStackTrace();
                   }catch (Throwable t) { throw new StreamTransformationException("error", t); }
    Unfortunately there seems to be at least one error in there because the result I get is just the following:
      <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
    - <ns0:mt_MappingIn xmlns:ns0="urn:agrp:xi:geissseb">
      <TABLE />
      </ns0:mt_MappingIn>
    Below you will find my source message:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <xsd:schema targetNamespace="urn:agrp:xi:geissseb" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:agrp:xi:geissseb">
      <xsd:element name="mt_MappingOut" type="dt_MappingOut" />
    - <xsd:complexType name="dt_MappingOut">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">a7a28830bebf11dc81aa001a4b0af224</xsd:appinfo>
      </xsd:annotation>
    - <xsd:sequence>
    - <xsd:element name="Set">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366510aeda11dcb3bb00174205b856</xsd:appinfo>
      </xsd:annotation>
    - <xsd:complexType>
    - <xsd:sequence>
    - <xsd:element name="f01" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366511aeda11dcaf2600174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_02" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366512aeda11dc84d400174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_03" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366513aeda11dcbcab00174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_04" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366514aeda11dc96a300174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_05" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366515aeda11dca77700174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_06" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366516aeda11dc8f7d00174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_07" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366517aeda11dcc24b00174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_08" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366518aeda11dc92cd00174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_09" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b366519aeda11dcc9b100174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
    - <xsd:element name="set_ELEMENT_10" type="xsd:string">
    - <xsd:annotation>
      <xsd:appinfo source="http://sap.com/xi/TextID">0b36651aaeda11dcc5a700174205b856</xsd:appinfo>
      </xsd:annotation>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:sequence>
      </xsd:complexType>
      </xsd:schema>
    When I had problems withe Java SAX Mapping, I got great hints in the forum. So I hope you can help me out again...
    Cheers Sebastian

    Here you go.
    Code
    package com.sap.test;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.InputStream;
    import java.io.OutputStream;
    import java.util.Map;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.ParserConfigurationException;
    import javax.xml.transform.Transformer;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.dom.DOMSource;
    import javax.xml.transform.stream.StreamResult;
    import org.apache.crimson.tree.TextNode;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import org.w3c.dom.Text;
    import org.xml.sax.SAXException;
    import com.sap.aii.mapping.api.StreamTransformationException;
    public class DomTest {
         Document documentOut = null;
         public static void main(String[] args) throws Exception
         try
         FileInputStream fin =      new FileInputStream("test.xml");
         FileOutputStream fout = new FileOutputStream("test_out.xml");
         DomTest mapping = new DomTest();
         mapping.execute(fin, fout);
         catch (Exception e) {
         e.printStackTrace();
         public void setParameter (Map param) {}
         public void execute (InputStream in, OutputStream out)
         throws com.sap.aii.mapping.api.StreamTransformationException {
         DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
         Document documentIn = null;
         DocumentBuilder builder = null;
         try {
         builder = factory.newDocumentBuilder();
         } catch (ParserConfigurationException e1) {
         e1.printStackTrace();
         try {
         Element itemNode = null;
         //NodeList[] list_f=new NodeList10;
         //Element[] field=new Element10;
         documentIn = builder.parse(in);
         documentOut = builder.newDocument();
         Element rootNode = documentOut.createElementNS("urn:agrp:xi:geissseb","ns0:mt_MappingIn");
         rootNode.setAttribute("xmlns:ns0", "urn:agrp:xi:geissseb");
         documentOut.appendChild(rootNode);
         Element tableNode = documentOut.createElement("TABLE");
         rootNode.appendChild(tableNode);
         NodeList list_Set = documentIn.getElementsByTagName("set");
         System.out.println(list_Set.getLength());
         for(int j = 0 ; j < list_Set.getLength() ;j++){
              Element setNode = (Element)list_Set.item(j);
              NodeList children = setNode.getChildNodes();
              for(int index = 0; index < children.getLength(); index++)
                   Node child = children.item(index);
                   if (child instanceof Element) {
                        Element element = (Element) child;
                        if(element.getNodeName().startsWith("set_ELEMENT"))
                             createItemFeildNode(tableNode,element);
         //list_f[9]=documentIn.getElementsByTagName("set_ELEMENT_10");
    //     NodeList list_f01=documentIn.getElementsByTagName("f01");
         /*for (int i=0;i<list_Set.getLength();i++)
         itemNode=documentOut.createElement("item");
         tableNode.appendChild(itemNode);
         for(int k=0; k<10;k++){
         Node f=list_f[k].item(i);
         f=f.getFirstChild();
         String str_f=f.getNodeValue();
         Text text_f=documentOut.createTextNode(str_f);
         field[k]=documentOut.createElement("item_FIELD_"(k1));
         field[k].appendChild(text_f);
         itemNode.appendChild(field[k]);
         TransformerFactory tf = TransformerFactory.newInstance();
         Transformer transform = tf.newTransformer();
         transform.transform(new DOMSource(documentOut), new StreamResult(out));
         transform.transform(new DOMSource(documentOut), new StreamResult(System.out));
         } catch (SAXException e2) {
         e2.printStackTrace();
         } catch (IOException e2) {
         e2.printStackTrace();
         }catch (Throwable t) { throw new StreamTransformationException("error", t); }
         private void createItemFeildNode(Element root, Element element) {
              String inName = element.getNodeName();
              int temp = inName.lastIndexOf('_');
              if (temp == -1)
                   return;
              String index = inName.substring(temp+1);
              String nodeName = "Item_FIELD_" + index;
              String nodeVal = element.getFirstChild().getNodeValue();
              Element newElement = documentOut.createElement(nodeName);
              Text txtNode = documentOut.createTextNode(nodeVal);
              newElement.appendChild(txtNode);
              root.appendChild(newElement);          
    Input
    <?xml version="1.0" encoding="UTF-8" ?>
    <mt_MappingOut xmlns="urn:agrp:xi:geissseb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:agrp:xi:geissseb file:/D:/Eclipse/workspace/SDN/test.xsd">
    <set xmlns="">
      <set_ELEMENT_01>E1</set_ELEMENT_01>
      <set_ELEMENT_02>E2</set_ELEMENT_02>
      <set_ELEMENT_03>E3</set_ELEMENT_03>
      <set_ELEMENT_04>E4</set_ELEMENT_04>
      <set_ELEMENT_05>E5</set_ELEMENT_05>
      <set_ELEMENT_06>E6</set_ELEMENT_06>
      <set_ELEMENT_07>E7</set_ELEMENT_07>
      <set_ELEMENT_08>E8</set_ELEMENT_08>
      <set_ELEMENT_09>E9</set_ELEMENT_09>
      <set_ELEMENT_10>E10</set_ELEMENT_10>
      </set>
      </mt_MappingOut>
    Output
    <?xml version="1.0" encoding="UTF-8" ?>
    <ns0:mt_MappingIn xmlns:ns0="urn:agrp:xi:geissseb">
    <TABLE>
      <Item_FIELD_01>E1</Item_FIELD_01>
      <Item_FIELD_02>E2</Item_FIELD_02>
      <Item_FIELD_03>E3</Item_FIELD_03>
      <Item_FIELD_04>E4</Item_FIELD_04>
      <Item_FIELD_05>E5</Item_FIELD_05>
      <Item_FIELD_06>E6</Item_FIELD_06>
      <Item_FIELD_07>E7</Item_FIELD_07>
      <Item_FIELD_08>E8</Item_FIELD_08>
      <Item_FIELD_09>E9</Item_FIELD_09>
      <Item_FIELD_10>E10</Item_FIELD_10>
      </TABLE>
      </ns0:mt_MappingIn>

  • Create key mapping using import manager for lookup table FROM EXCEL file

    hello,
    i would like create key mapping while importing the values via excel file.
    the source file containing the key, but how do i map it to the lookup table?
    the properties of the table has enable the creation of mapping key. but during the mapping in import manager, i cant find any way to map the key mapping..
    eg
    lookup table contains:
    Material Group
    Code
    excel file contain
    MatGroup1  Code   System
    Thanks!
    Shanti

    Hi Shanti,
    Assuming you have already defined below listed points
    1)  Key Mapping "Yes" to your lookup table in MDM Console
    2) Created a New Remote System in MDM console
    3) proper rights for your account for updating the remote key values in to data manager through import manager.
    Your sample file can have Material Group and Code alone which can be exported from Data Manager by File-> Export To -> Excel, if you have  data already in Data Manager.
    Open your sample file through Import Manager by selecting  the remote system for which you want to import the Key mapping.
    (Do Not select MDM as Remote System, which do not allows you to maintain key mapping values) and also the file type as Excel
    Now select your Soruce and Destination tables, under the destination fields you will be seeing a new field called [Remote Key]
    Map you source and destination fields correspondingly and Clone your source field code by right clicking on code in the source hierarchy and map it to Remote Key if you want the code to be in the remote key values.
    And in the matching criteria select destination field code as a Matching field and change the default import action to Update NULL fields or UPDATED MAPPED FIELDS as required,
    After sucessfull import you can check the Remote Key values in Data Manager.
    Hope this helps
    Thanks
    Sowseel

  • How to create Rules with Flex Field mapping in the bpm worklist

    I Have created a flex field label and was able to map to the flex field attributes .
    But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
    Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
    Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
    Any pointers or suggestion is highly appreciated .

    Hi,
    SE38 -> Enter program
    Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
    Now the selection screen will display with a button "Variant Attributes" at the top.
    Click on that button.
    In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
    In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
    Now whenever you run the prgrm with this variant, date will be displayed by default.
    Regards,
    Subramanian

  • Problems with external context mapping

    Hi ,
    I am having the following problems with external context mapping from one WD component to another.
    Problem description:
    In the <i>Component Interfaces</i> I have defined a WD interface "InfA".
    In the <i>interface controller</i> of this compoenent,I have ContextA and attributeA(cardinality 1..1).The contextA is marked as an "Input Element".
    Now my webdynpro componentB adds InfA as used component.In componentB I decalre a contextB with attributeB and map it to contextA to set up the external context mapping.
    Now I expect that if any webdynpro component implements this WD interface InfA ,he has access to contextA with the data getting filled from contextB.
    After i have created the component for the used component I try to fill values in the source node contextB thru this code:
    wdContext.currentContextB.setB(value);
    But in the runtime I keep getting error nullPointerException for nodeContextB,suggesting that the mapping has not been completed.
    Can anyone suggest due to what the error can come ,and, if its a webdynpro bug ,is there a workaround??
    Thanks in advance for your help.
    Best regards
    Sourav

    HI,
    Valery : I personally checked  by doing the example, if the names of value attribute are different in the child's interface and parents component controller then it throws the exception.
    Sourav: NullPointer Exception is thrown when something is not properly initialised, if in the main component the cardinality of mapped origin is 1.1 then you need to access it element directly like:
    wdContext.currentParentNodeElement().setFname("Abhijeet");
        wdContext.currentParentNodeElement().setLname("M");
    i will suggest just check out if you are declaring some element of value node and without initialising taking its use or what?
    if this doesnt solve your problem, please post the expanded exception.
    hope it helps
    let me know if you face nay problem
    regards

  • Problem with castor xml mapping

    Hi,
    we have following problem with castor xml mapping.
    How to use references in the collections(Hashmap or vector)?
    WE have a method called getAttribute map which will return a hashmap consist different type of objects. We want to keep only the
    references of objects if that object occurs more than once,instead of keeping the whole object
    Following is the the xml mapping file.
    <mapping>
    <class name="com.opvista.ndtool.core.mos.ManagedObject" identity="Id" auto-complete="false" verify-constructable="false">
    <map-to xml="ManagedObject"/>
    <field name="Id" get-method="getId" set-method="setId" type="string">
    <bind-xml name="Id" node="attribute"/>
    </field>
    <field name="AttributeMap" type="org.exolab.castor.mapping.MapItem" collection="map" get-method="getAttributeMap">
    <bind-xml name="AttributeMap" node="element">
         <class name="org.exolab.castor.mapping.MapItem">
    <field name="key" type="java.lang.Object">
         <bind-xml name="key" node="attribute"/>
    </field>
    <field name="value" type="java.lang.Object">
         <bind-xml name="value" node="element" reference="true"/>
         </field>
    </class>
         </bind-xml>
    </field>
    </class>
    </mapping>
    we are using reference=true for the values. But it will throw below exception.
    Unable to resolve ID for instance of class 'java.lang.String' due to the following error: Unable to resolve ClassDescriptor.
         at org.exolab.castor.xml.Marshaller.getObjectID(Marshaller.java:1988)
         at org.exolab.castor.xml.Marshaller.marshal(Marshaller.java:1628)
         at org.exolab.castor.xml.Marshaller.marshal(Marshaller.java:1831)
         at org.exolab.castor.xml.Marshaller.marshal(Marshaller.java:1814)
         at org.exolab.castor.xml.Marshaller.marshal(Marshaller.java:1825)
         at org.exolab.castor.xml.Marshaller.marshal(Marshaller.java:821)
    Please help us to overcome from this problem?
    Thanks,
    Dileep

    for your ref here is what i think the basic mapping file would look like
    <class name="Person">
    <map-to xml="person"/>
    <field name="name" type="string">
    <bind-xml name="name" node="attribute" />
    </field>
    <field name="age" type="string">
    <bind-xml name="age" node="attribute" />
    </field>
    </class>
    <class name="MetaPerson">
    <map-to xml="person"/>
    <field name="dependents" type="string">
    <bind-xml name="dependents" node="attribute" />
    </field>
    <field name="presentAdd" type="string">
    <bind-xml name="present_add " node="attribute" />
    </field>
    <field name="permanentAdd" type="string">
    <bind-xml name="permanent_add " node="attribute" />
    </field>
    </class>
    however i am still not clear as to how i can use the metaperson object in the person class as well as in the mapping file.
    hope this gives a better idea abt my problem statement.
    Please help me out

  • When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be perfomed on a file with a user-mapped selection open'.

    When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
    Can anyone help solve this please?

    ELEMENTS 12 AND ELEMENTS 13
    Upgraded to 13 Thinking might resolve the issue.
    Was working fine up until we had "Tech" come in the office and "up grade some stuff"
    then all of a sudden i started getting this message, something happened but i don't have a clue what.

  • Trouble with after effects map and geotagging cities using "locations" plugin

    Question for anyone who uses the After Effects Locations plugin to add location based data to After Effects maps. I just downloaded (and watched the tutorial) "Locations" plugin from this page: Locations
    In his tutorial, the "Locations" designer (Fabian) explains how to use gpsvisualizer's geocoder to obtain lat/log coordinates for a bunch of cities. The problem is that Google won't allow me to obtain more than one city's lat/long coordinates at a time. Google says I need an "API key" to obtain more than one city's coordinates.
    I also need to know if Locations will work with any world map? Any help would be much appreciated.
    I've had no luck so far using "Locations" after downloading an equirectangular (2000 x 1000 pixel) map from wikipedia:
    Basically all the cities are way way off on the world map, even though I have the correct lat/long coordinates for those cities.
    Le Havre for example is in Normandy and on the map it's not even showing up in France.  So everything is wrong.

    Hi Dave,
    Not sure why but now everything's working!
    I must have been off with something, but haven't figured out what exactly.
    Still using the 2000 x 1000 pixel map but it's actually a vector map prepped in Illustrator, so not pixel based. Just the artboard is set to 2000x1000 pixels.
    Thank you in any case. 

  • TS1702 Dear Apple: You've lost your way with the new Map app

    Dear Apple:
    I have always been a faithful iPhone user because I believed it was the best device on the market.  Other phones keep coming out with useful and fun features and applications, but I remained loyal to the iPhone, knowing that it was a game of leap-frog and Apple would always catch up and surpass the competition.
    Now, unfortunately, you have fallen short.  Not only did you not beat the competition, but you took a big step backwards with your Map application. 
    I rely on a good map app to help me get around a city that is still new to me, find stores and locations quickly and easily, and get information on public transportation.  Your map app can do none of that.  It's cumbersome, not integrated with public transit routes, and doesn't even know where my local BevMo! is.
    I don't just want the old Map app back, I NEED it back.  The new one feels crippling compared to what I had before.  I'm struggling with it on every use, and am longing for the old app on every usage.
    I don't care about your competition with Google.  That's between you and them.  But don't make the customer the victim of this war.  Swallow your pride and admit that Google beat you handily on this one front.  And then get the old Map app back for me.  It will make Apple the winner in the long run, I promise.
    Sincerely,
    Eric

    This is a user to user help forum only. You are not addressing anything to Apple here.
    The licensing agreement between Apple and Google for the Maps app and YouTube app expired. Rumor has it Google wanted to include advertising with Apple's Maps and YouTube apps and probably wanted to increase their licensing fee. It isn't coming back.
    http://maps.google.com

Maybe you are looking for