Help with 10.5 please, running windows 7, store will not load

I have searched here and seen others having this issue also but I see no fix that has worked for me.
Installed 10.5 because I am getting an Iphone 4.  Itunes opens but the store will not load.  Starts to loads and then just sits.  I did the command prompt DNS flush fix, shut down and it did not work. 
Any suggestions for me?  Running Norton for antivirus.  I have not seen anybody on here saying that is a problem.  We have another computer running windows 7 and Norton and 10.5 is fine on that computer.
Thank you.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99425)

Similar Messages

  • Itunes store will not load please help

    I am having a lot of trubble itunes store will not load can anyone help please help

    I had the big stupid NoN response from the Itunes store and spent days researching.  Begin at
    http://www.apple.com/support/itunes/troubleshooting/
    Lotsa good stuff there.
    In the end I found a software conflict with Speedbit's SpeedOptimizer v2.xx   aka  SPO.exe in my taskmanager's process list.
    I found that by watching Norton Firewall complain about stuff while running in ADVANCED mode.
    Happy hunting.

  • Help please. CS6 exchange panel will not load.

    Hi,
    I have Photoshop CS6 extended and for some reason my adobe exchange panel will not load. This only happened earlier today.  I have been designing all week and never had a problem before this. I cannot load any of the panels in Photoshop.  I have done everything possible and trust me I worked on a solution for over 5.5 hours searching reading, uninstalling re installing etc and no solution. I just keep getting this error message "Cannot complete command because the extension could not be loaded".
    The version of Extension Manager is 6.0.7.6. I came back to edit this as I should have mentioned that I did disable my anti virus.
    I would really appreciate any advice please.
    Thank you in advance
    Rosa
    I have since discovered that the problem was the software onOne Perfect Photo Suite 8  which I had installed earlier today - so have contacted onOne for support. I ended up un-installing the program and Photoshop has returned back to normal.

    Obviously my problem was with the onOne new Suite 8 plugin. I had Suite 7.5 as well as PhotoFrame 4.6 Professional Edition and Photo Tools installed, so after trying a few different things my last option which worked was as onOne suggested and that was removing the onOne panel completely from CS6 and re installing Suite 8 ticking the 3rd option in the installation process - leaving PhotoFrame and Photo Tools installed.  I do have many panels in CS6 and to my delight after the installation of Suite 8, all the panels in my CS6 were operational and ready to go!
    Obviously there was a clash with the Suite 7.5 and 8. Removing Suite 7 worked for me. Initially onOne advised not to uninstall the previous version and just tick the first option to keep both versions. Obviously there was a clash between the version panels.
    Hope this helps.

  • In Firefox 18.0.1 on Windows XP, pages will not load until I hit reload

    In Firefox 18.0.1 on Windows XP, many pages will not load initially. They will sit, blank, with the little spinning circle. If I hit reload, they immediately load. I have verified that all plugins are up to date (AdBlock Plus and Web Of Trust) and that I have the latest version of Java. I also have added Firefox as an exception to Windows Firewall, and verified that no proxies are set.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Lenovo g550 windows xp drivers will not load

    Help!  I purchased a Lenovo G550 yesterday and am in need of assistance.  Unfortuantely it doesn't appear that there is any way to contact Lenovo, the website doesn't show any method of even emailing them without an IBM service tag (which unless you are corporate user you can't get). 
    I purchased a lenovo g550 yesterday configuration is 3gb ram 160Gb HDD.  Upon booting the system I discovered that in fact users only get access to about 100Gb of the harddrive the rest is set up under multiple hidden drives.  I the system came with windows 7 home edition.  I need windows xp.  So through several hours of work I was able to create some unallocated space on the harddrive.  I loaded my copy of windows xp professional to this space and since windows automatically selects the drive name it is drive D: 
    I went to the lenovo website prior to loading xp and manually downloaded every driver from the site (very time consuming, I saw another way via a forum but was not able to locate it on the lenovo website).  Immendiately after loading xp and rebooting I loaded the intel chipset driver.  Then rebooted.  No other drivers will load for any of the other pieces of hardware.  All of THEM, everyone crashes with an error message that there is not enough disk space on c: to load.  I would guess that there isn't since c: is a 200mb hidden drive created by Lenovo. 
    Does anyone have a work around for this problem with the lenovo drivers?  This has turned into a multi-hour project for something very simple - putting an alternative operating system on the computer.  I cannot put xp as the c: drive because of the lenovo hidden partition is named c:.  I don't want to delete windows 7, as I expect to move to it in the next year but right now I several thousand dollars worth of software in xp and need to use that software. 
    I sure would appreciate any assistance :-)  Again the issue is the lenovo windows xp drivers, everyone of them excluding the intel chipset driver will not load under windows xp when windows xp is loaded onto the d: partition.  they all say they want to load onto the c: parition which is not an option.
    thanks in advance for any help and if anyone knows how to get in contact with lenovo would love that also.

    Well if you do not want win7 all together, then just delete all the partitions and install your XP. But if your not wanting to mess up this drive to be able to use the win7 later then just buy a cheap HDD to put XP on. --> http://www.newegg.com/Product/Product.aspx?Item=N82E16822148452 $10 off and free shipping. but being that you already tried installing XP then you already messed up win7 anyways(if you did not make the restore disks), your better off just deleting and redoing XP.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • I have an issue with Acrobat, after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
    Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical.

  • Airport utilities does not recognise windows 7 and will not load, how do I fix this?

    Airport utiltiy will not load, it does not recognise windows 7 and I get an effor message telling me that it requires XP  or vista etc.
    I have deleted and reloaded Airport Utilities, Bonjour and Itunes to no effect. Help!

    well...i go only to the site "Test it here: http://java.com/en/download/help/testvm.xml". After this i was able to go to a site with the title "Java Downloads for All Operating Systems" and here you download your JRE for your OS. For XP or Win 7 it was a java 6 update 29-b11. The file to install is named '''jxpiinstall.exe'''. After install an restart you go again to [http://java.com/en/download/help/testvm.xml testvm.xml] and see that the java plugin works fine.... (see the screenshot)...
    cheers
    marco

  • After I updated Windows my Firefox will not load completley, the page is nothing but boxes.

    I updated windows 2 days ago and since then all of the pages I try to go to will not load up properly. Everything on the page is boxed off. I am using Windows Vista and have 4.01 Firefox. I already looked at my add-ons and removed or disabled the things that said they were not compatible.

    Did you remove the Firefox program folder before reinstalling Firefox?
    Do a clean reinstall and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a fresh copy of Firefox.
    *http://kb.mozillazine.org/Installation_directory
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Failure load.cpp line 4835 VI runs ok in 6i will not load in 6.1

    I have created a rather complex instrument interface in 6i and it works fine. I have recently upgraded to 6.1 professional; the VI will not load and an internal failure occurs in load.cpp on line 4835. Is this a bug, or did I do something incorrect? I tried to do a mass compile, but this fails also. The load seems to have problems with a specific VI, so I removed this VI and was able to load by cancelling attempts to locate. I have tried to re-link the problem VI, rebuild the problem VI in 6.1, modify the diagram so that the problem VI is not used/referenced; none of these worked. Labview generally would crash when I save after making the aforementioned modifications. Note: the problem VIs consist of a globa
    l variable, and a case VI that uses the same global variable.
    I hope that this information is complete enough to point to a solution. Thank You,
    Howard Havlicsek, Acutronic

    This is typically a result of having more than 555 controls/indicators on
    a front panel. A workaround is to place controls/indicators into clusters
    since each cluster only counts as a single UI object. Do this until you
    get below the 555 limit. A better ideal in most cases is that you don't
    need that many indicators on the front panel where a user has to try and
    figure out what he should be looking at. If they are not used often move
    them into subVIs and display the subVI front panels as needed.
    If this doesn't appear to be the cause of your load.cpp error I would
    contact NI tech support at ni.com/ask.
    Marcus Monroe

  • I just downloaded Itunes 11.1.4 (64-bit) and am running Windows 7, Itunes will not open and I get an error message about Microsoft runtime and I get an error R6034 and 1114 which says Itunes was installed incorrectly. Can anyone help?

    I just downloaded Itunes 11.1.4 (64-bit) update and am running Windows 7.  Itunes will not run after installing this update and I receive an error message R6034 on Loading Microsoft C Runtime Library incorrectly.  Also Error message 1114 the Itunes Installer was installed incorrectly.  Is there an new update for this problem? Is anyone else having this problem?  Please help.  Thanks.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99425)

  • I have a mac pro wich will not open windows in boot camp i get to the two options select windows but iyt will not load can you help please

    i have a mack pro which will not open in windows from boot camp get to the two options and select windows drive but it will not open can you help Please

    Hi there, Well, i thing i might have had the same problem (if you dont mean the selecting part, then try keyboad with usb and without if u dont have a macbook pro or so), i did the same and after selecting windows it said "No bootable disk" or " no boot disk" or something like that and the installer wont start when i was trying to install via CD/DVD.
    The sulution is to use 2 usb-drives, one for the support drivers from apple and one for the windows it self after burning the CD/DVD to the usb on a PC using the windows own tools and creating a ISO file.
    (there might be problems whit CD/DVD install sometimes)
    The ISO file on a own USB is the most importat thing!! (and even apple and windows didnt know that but me and a technikal support guy from the store i bought it managed to fix it after like 4 days )
    Hope it work now mate!

  • C55Dt running Windows 8.1 will not go to sleep or turn off when lid is shut

    Toshiba Model C55Dt will not go into sleep mode when I shut the lid.  Only about 10 months old....will not turn off, either.  I have checked and power settings are properly set.  All 3 lights stay on in front....battery charge, power, and computer usage.  Have checked Task Manager and nothing unusual running.  Any help appreciated.

    Which Satellite C55Dt ? There is a label on the bottom.
    Would it be a problem to reinstall your desktop applications if the data files were undisturbed?
    -Jerry

  • I'm having problems with my itunes on a windows computer it is not loading up or syncing

    Right so ive tried to restore my itunes and ive also uninstalled it and installed it back up again nothing has happened at this stage it is still not loading up, and has not been for a while now, does anyone know what to do?

    Hi tomwardthomas,
    Welcome to the Support Communities!
    Did you update your Final Cut Pro X software from 10.0 to 10.1?  (On the menu bar click on Final Cut Pro > About Final Cut Pro).  If so, the file structure has changed quite a bit.  If you chose to Update All of your projects and events, your projects should be in an event named Updated Projects. The article below will explain this in more detail.
    Final Cut Pro X 10.1: Updating and working with libraries FAQ 
    http://support.apple.com/kb/HT5958
    Where are all of my projects after I update to Final Cut Pro X 10.1?
    All of the projects that were in the Project library are collected in an event named Updated Projects at the top of the list of events in your new library in the Libraries list.
    Where does my media go after I update?
    Media that you stored inside your original event is stored inside your new library. Media that was linked to an external folder and not copied inside your original event stays in that external folder and is linked to your new library.
    I hope this information helps ....
    - Judy

  • HT1386 Need help with husband iPod......will not sync or show up in device drive??

    Ok so I thought I fixed both my husband and I iPod, but only mine is working. When I go to plug in his iPod I get a PhotoShow express pop-up as well as Auto Play. When I go to click on the file in auto play the only thing it pops up is Internal Storage and when you click on internal storage the only file that shows up is DCIM only. iTunes will not even show up and when I start iTunes it will not even sync the iPod. I go under the Device Manager and under Universal Serial Bus Controller the apply device is not even there. Basically the only thing it does it charge the iPod.....Does anyone know how to fix this problem? I know my husband said something pop up about a month ago and he tired to import music, but all of his music disappear. Now I can't get his iPod to work. He has the 4th generation of iPod. Please someone help me to fix his iPod........Thanks.

    Thank you again......I removed ALL files of Apple and iTunes and reinstalled it and now the iPod is syncing and working in iTunes.....I have a feeling I did not removed ALL files of Apple and iTunes and thats why it was not working......after I followed and make sure all files are removed and reinstalled iTunes it went into iTunes. Thank you again!!!!!!!

  • Running windows 7 itunes will not open

    i have downloaded and installed itunes and it will not open.. i am on a brand new computer, with windows 7, so i tried uninstalling and reinstaling it, still it will not open?

    Restart computer
    Refer to following article to remove SC file(s):
    Win 7/Vista http://support.apple.com/kb/TS2363
    WinXP http://support.apple.com/kb/TS1776
    Then proceed to repair your Quicktime:
    Win7/Vista - Start > Control Panel / Programs N eatures
    WinXP - Start > Control Panel / Add n Remove Programs
    Highlight QUICKTIME and click CHANGE then REPAIR.

Maybe you are looking for