Help with 10g Reports Parameter form Fonts

Hi
We are trying to upgrade to 10g from 6i developer, when we try to run a report, the parameter form fonts comes out ugly.., on a Linux plat form , the fonts we have on the parameter form are Ariel 8, 10 and 12. Any idea what to do to fix these?.

Please try this question on the Reports forum. I know that there is a way to handle this.
Frank

Similar Messages

How to display Reports parameter form in Oracle Forms 10g.

hello,
am migrating from Forms 6i applications to Forms 10g.
one of my application contain report, that report display parameter form
I wrote below code for WHEN-BUTTON-PRESSED Trigger
DECLARE
pl_id      ParamList;
v_report_id report_object;
v_report varchar2(100);
vjob_id varchar2(100);
vc_rep_status varchar2(100);
BEGIN
pl_id := create_parameter_list('my_list');
add_parameter (pl_id,'P_HOSPITAL_ID',text_PARAMETER,
:bm_hospitals.hospital_id);
add_parameter(pl_id,'PARAMFORM',text_PARAMETER,'NO');
v_report_id := FIND_REPORT_OBJECT('bm_r001');
v_report := RUN_REPORT_OBJECT ( v_report_id,pl_id );
vjob_id := substr ( v_report, length(<reportservername>)+2,
length( v_report) );
vc_rep_status := REPORT_OBJECT_STATUS (v_report);
IF vc_rep_status = 'FINISHED' THEN
     WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id||
'?server=rep_mohahubkpcomp_ORaHOme_IAS'||'&userid=
bedman/bedman@bedman'||'&paramform=yes','_blank');
ELSE
     message ('Report failed with error message '||vc_rep_status);
END IF;
Destroy_Parameter_List(pl_id);
END;
The Above code is running report and displaying Output perfect but cannot
display the Parameter Form at runtime.
any help in this very thankful.
Regards
Gagan.

In Your code there is a line:
add_parameter(pl_id,'PARAMFORM',text_PARAMETER,'NO');
which actually disables the report parameter form.
The line:
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id||
'?server=rep_mohahubkpcomp_ORaHOme_IAS'||'&userid=
bedman/bedman@bedman'||'&paramform=yes','_blank');
displays the report to which vjob_id refers. At this point the report is competed so the parameters userid and paramform are useless.
Hope this helps.
Regards
Bekcic Aleksandar

Report 10g: Runtime Parameter Form

Is there any way in Reports 10g to trigger Parameter Validation just after
user enters a Parameter?
I would like to have dynamic LOV in Reports Parameter Form....
So contents of LOV list items in Report Parameter #3 would depend on the user selection from LOV in Report Parameter #1

It is not as simple as just adding this parameter to the URL. You have to do some coding too.
The basic problem is that the paramform code contains a HTML FORM without any action. So, you have to create an action yourself.
See Metalink note 139546.1 on how to modify your reports (there should be a white paper on OTN too, but I can't find the link anymore).
Bottom line is: yes, it is much simpler to use Forms as your parameter form.

Urgent! Using Reports parameter forms with RUN_REPORT_OBJECT on 9iAS

Hi all, I am migrating client-server to 3-tier with 9iAS Rel2 on AIX 5.1. The forms and reports are upgraded from Forms4.5 to forms9i and Reprots 2.5. We used to have user defined parameter in parameter form(e.g. articale no.) to select records appearing in the report.
However, the Report parameter form doesn't work on web.
I have read Note : 139546.1 but I want the parameter entered in Report parameter form, not in the Form that call the report.
Does anyone has samples of Forms and Reports doing to achieve that? Thank you very much in advance.
best regards,
Kathy

Kathy,
please have a look at the Forms and reports integration Whitepaper that is available from otn.oracle.com/products/forms. This shows you a coding example of what needs to be done to make parameter forms work on teh Web. This papaer is available for Forms9i/Reports9i and Forms6i/Reports6i
Frank

Report Parameter form not showing list of values in Report svr

I was using reports 6i where I used to have list box in report parameter form. I now converted recompiled my reports in 10g and when I run I am not geting the list of values. I get the values as a list below the field
ex.
ITEM :___________
box,book,pencil,rubber,
dvd,floppy...
previously it was coming as a list in the item field
thanks
MG

Hello,
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/howto/params/pmp_creating_list_of_values.htm?tp=true
If you run the report from a Web browser and the list of values is unrestricted, the HTML Parameter Form will display a text field instead of a combo box, and a list of static values that you can copy and paste into the text field.
Regards

Not getting Reports Parameter Form in web-forms environ

I am not able to get a report parameter form to appear for a
report called from forms via a 'run_product' command. It works
fine in client/server mode. In web-forms the report just goes
ahead and runs without the needed parameters. I have tried
explicitly passing a parameter list with the 'paramform' set to
'yes' and this did nothing. I have this on a NT box with latest
Dev2 patches applied.
1. Is the reports parameter form supposed to work in web-forms
mode?
2. How do you set it up to work, if it is supposed to work?
Thanks for any replies.
null

I guess you have to use web.show_document - I found this article
on DevConnect:
Article-ID: <Note:68647.1>
Circulation: PUBLISHED (EXTERNAL)
Platform: GENERIC Generic issue
Subject: How to show Reports HTML PARAMFORM when
calling Reports
from Forms
Modified-Date: 09-AUG-1999 18:02:04
Document-Type: BULLETIN
Content-Type: TEXT/PLAIN
Impact: MEDIUM
Component: SQLREP
PURPOSE:
This bulletin explains how to overcome the current restriction
of calling an Oracle Report from Oracle Forms and showing a
PARAMETER FORM. This is currently not possible when using the
RUN_PRODUCT built-in with
WEB DEPLOYED APPLICATIONS.
DESCRIPTION:
When you call an Oracle Report from Oracle Forms using
RUN_PRODUCT in Client-server, you can specify an optional
parameter called PARAMFORM to display the parameter form defined
in the Oracle Report.
For web-deployed applications, the PARAMFORM parameter can be
set to HTML to produce a HTML version of the parameter form.
When calling Oracle Reports from an Oracle Form using
RUN_PRODUCT and specifying PARAMFORM=HTML in the parameter list,
the Oracle Reports parameter form doesn't show the in the client
browser. If the Oracle Reports Cartridge/CGI is used and
PARAMFORM=HTML is specified, then the Oracle Reports parameter
form does appear in the client browser.
Oracle Forms does not use either the Cartridge or the CGI with
RUN_PRODUCT, and it's these thin clients that produce the HTML
Oracle Reports parameter form.
As a workaround to this problem, you can use either the
Cartridge or the CGI with the WEB.SHOW_DOCUMENT Oracle Forms
builtin. This does require either the Oracle Reports Cartrige
or the CGI to be installed. Neither of these are necessary if
the parameter form isn't required.
INSTRUCTIONS:
The following items need to be installed:
1. Oracle Reports Multi-tier Server.
2. Oracle Reports Web Cartridge
or
Oracle Reports Web CGI.
Here is a typical URL that can be specified in a browser
to run a report using Oracle Reports Cartridge implementation:
http://your_webserver/r30ows?
server=repserver21+report=emp_30.rep+
destype=cache+desformat=html+userid=scott/tiger@mydb+paramform=ht
ml
For CGI implementation:
http://your_webserver/your_vir_cgi_dir/r30cgi32.exe?
server=repserver21+report=emp_30.rep+destype=cache+desformat=html
userid=scott/tiger@mydbparamform=html
The Oracle Reports parameter form now is shown. This can be
used with WEB.SHOW_DOCUMENT issuing the request to execute the
report to the Oracle Reports Multi-Tier Server instead of using
RUN_PRODUCT.
The following code may be added to a program unit, which then
issues the request to run the report:
IF get_application_property(user_interface) = 'WEB' then
/* Use Cartridge configuration with WEB.SHOW_DOCUMENT. */
WEB.SHOW_DOCUMENT('http://your_webserver/r30ows?
server=repserver21+report=emp_30.rep+destype=cache+desformat=html
userid=scott/tiger@mydbparamform=html', '_self');
/* OR for CGI configuration. */
WEB.SHOW_DOCUMENT
('http://your_webserver/your_vir_cgi_dir/r30cgi32.exe?
server=repserver21+report=emp_30.rep+destype=cache+desformat=html
userid=scott/tiger@mydbparamform=html', '_self');
ELSE
/* use RUN_PRODUCT for client-server with PARAMFORM=Yes. */
Add_Parameter(plid, 'PARAMFORM', TEXT_PARAMETER, 'YES');
RUN_PRODUCT
(REPORTS,'emp_30.rep',SYNCHRONOUS,RUNTIME,FILESYSTEM,plid);
END;
RELATED DOCUMENTS:
Developer/2000: Guidelines for Building Applications, Deploying
Applications on the Web (for detailed instructions on setting up
the Oracle Reports Cartridge and CGI)
Laura (guest) wrote:
: I am having the same problem with Dev 6 on NT. The parameter
: screen for reports works in client/server but not web using
run-
: product. I am getting error REP-0788: Warning the value of
the
: restricted LOV parameter is not among the selectable values.
: Any reports without a parameter screen work fine with run-
: product.
: Any help would be appreciated.
null

Report parameter form in ADF/JHS

I am looking for the best way to develop a ADF page (with or without JHS) similiar to the Headstart report parameter form in Oracle Forms. I found a dynamic parameter form example on Steve Meunch's "Not Yet documented ADF Sample Applications", #93 that seems ideal. Has anyone implemented this approach using the existing Headstart tables? How were the LOV queries handled?
Any feedback would be appreciated.

Hi Carl,
Include PARAMFORM=YES in the URL to display the parameter form in RDF to be displayed in the web.But it is showing a submit and reset button at the top.I am not sure how to get rid of it.Hope this will help
Gracelin

HELP with Oracle Reports 6i - user parameters .....

Hi, i have made a form with button in Oracle Forms 6i.
When i press the button it fires trigger (when-button-pressed) where i declared and made parameter (:p_dep_no) which i want to sedn to report and later query report with this (:p_dep_no) ...
In Oracle report i made this parameter under user parameter and made my SQL statemet where i included in where clause my parameter (:p_dep_no) .
When i run oracle forms and press this button i get popup screen which asks me to enter this user parameter....
My question is - how i can make it all automaticly ... that i didn't need to write (:p_dep_no) manualy, but report could get this parameter from oracle forms and then show me only queried report ....
Plz help

i have similar code already wroten to button, but when i push button and report is opening, i get popup report parameter form screen and it asks me to write parameter value....
here i have (when-button-pressed) code :
declare
     pl_id ParamList;
begin
     pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
           Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
     Add_Parameter(pl_id,'par_report',TEXT_PARAMETER, :registry_id);
     RUN_PRODUCT(REPORTS, 'C:\Oracle\DS6i\BIN\reg_atskaite_vienam.rdf',SYNCHRONOUS,runtime,FILESYSTEM,'pl_id',null);
end;

Display Report Parameter Form on Web Browser

I have prepared a report (with a user parameter form )using Report Developer. Then I call the report in a web-based application through the web-browser. the parameter form display normally, except that there are two buttons on the top : submit and return. Also, the layout of the parameter form is not consistent with the style of my application.
1. Can I customized the layout of the parameter form so that it can have consistent style with my web-based program ? If yes, how?
2. Can I suppress the buttons shown on the parameter form ?
(Our Report Server is 9iAS )

Hi
Reports built-in parameter form is deliberately fairly simple in capabilities (otherwise, you'd have all the functionality of Forms inside of Reports). However, with JSPs in Reports 9i, you can go farther to create a custom parameter form of your own liking.
Thanks
The Oracle Reports Team

REP-50134 occurs when using the submit button on the Reports Parameter Form

Good Morning,
I get the "REP-50134: Cache subitem reports does not exist" error after clicking on the Submit Button from a Reports parameter form.
I am using Forms/Reprots 9i.
Using the source code given in the Whitepaper 'Oracle Forms Services - Using Run_Report_Object() to call Reports with a parameter form', all works well when paramform=no, but when I have a Form print a report with paramform=yes, the parameter form appears correctly, but generates the error after clicking the Submit Button.
Any inputs as to causation or possible places to look to solving this problem would be greatly appreciated.
Thank you

Hello and thanks.
The value in the tag is <form method=post action="reports?">
Looking at this I suspect my problem is related to this setting. I am trying to follow all the instructions in the White Papers but they are a little confusing as they are not all exactly the same. Each attempts to explain a specific functionality without regards to the whole.
For instance I believe I need to have the variables P_ACTION, P_USER_CONNECT and P_SERVER_NAME in the report being called and then add a Before Parameter Form trigger to reset the values. But this seems to duplicate and override what has already been sent via the REPORT_OTHERS property. It is a tad bit confusing.
Can you confirm?
Thanks for any clarification you can provide.

Problem in Insertion into table through After Report Parameter form trigger

Hi All,
I am getting problem in inserting some data into temp table through Report.
My requirement is like that, I have to do a calculation based on user parameters, and then insert the data into the temp table. I wanted to do this into After Report Parameter form trigger function. I have done all the calculation and wrote all the insert statement in that function. There is no problem in compilation. then I am taking value from this temp table in my formula columns.
When I run this report, it hangs, don't understand what is the problem.Can anybody help me out in this.
Thanks,
Nidhi

The code is as follows:
function AfterPForm return boolean is
CURSOR CUR_RECEIPT(RECEIPT_NUM_FROM NUMBER, RECEIPT_NUM_TO NUMBER) IS
SELECT DISTINCT receipt, item_no FROM xxeeg.xxeeg_1229_sp_putaway WHERE RECEIPT BETWEEN
RECEIPT_NUM_FROM AND RECEIPT_NUM_TO ;
V_CUR_RECEIPT CUR_RECEIPT%ROWTYPE;
begin
OPEN CUR_RECEIPT(:RECEIPT_NUM_FROM, :RECEIPT_NUM_TO);
FETCH CUR_RECEIPT
INTO V_CUR_RECEIPT;
LOOP
EXIT WHEN CUR_RECEIPT%NOTFOUND;
IF V_CUR_RECEIPT.ITEM_NO = 'TEST1' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 12
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 13
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 14
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
IF V_CUR_RECEIPT.ITEM_NO = 'TEST2' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 16
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 17
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 18
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 19
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 20
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 21
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
END IF;
END IF;
END LOOP;
COMMIT;
CLOSE CUR_RECEIPT;
return(TRUE);
end;
.....................................................................................................................

I need help with a 1 Page Form with scrollable text field (5000 limit characters) and printing

Hello, I have no training in using Adobe Acrobat Pro or Livecycle Designer so I need major help with a 1 page form that I am attempting to create. Basically the form will be used to nominate employees for a Job Well Done Award.
The form contains the following:
1.) The name(s) of the employees being nominated and the date of the accomplishment.
2.) In the middle of the page I have a section for a write up, limited to 5000 characters, this is were I am needing the most help. A couple of things, about this section: The font is set at 11 and I don't want it to change. The text field has multiple-line, scroll long text enabled. The text field is a certain size and can only hold so much text, then it starts to scroll, which I am ok with, I like that feature. The issue I am having is during printing. I would like to keep the text field scrollable but when I print I would like to be able to print everything in that field. Executing this is the problem, I have no clue how to do it. I was hoping for some setting within Acrobat Pro or LiveCycle to be available, but the more I read and research this, it appears that it may require java, xml, basically some coding. I don't know for sure.
3.) Below the text field I have another field for the person nominating to type their name and right next to that another field for a digital signature.
4.) And finally below those two fields I have a Submit button that is setup to start email application so the form can be emailed to the proper inbox.
Thank you in advance.

With an Acrobat form the only thing you can do is export the text to
another location (like a blank field on another page) or to another file
format. With an LCD form you can expand the text box itself, but you'll
need to ask about that over at the LCD Scripting forum.

URGENT: Report parameter form set to yes in calling report from menu

I have write this code for calling report from menu module. But where i put the code
PARAMFORM='YES' to display the report parameter form in order to enter the parameter by user.
DECLARE
pl_id ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
v_server VARCHAR2(100);
rep_status varchar2(100);
v_host VARCHAR2(100);
BEGIN
     select rep_server into v_server from reports_data;
     select machine into v_host from reports_data;
     pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
     Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'P_C_NAME',TEXT_PARAMETER,:GLOBAL.COMPANY);
Add_Parameter(pl_id,'P_B_NAME',TEXT_PARAMETER,:GLOBAL.BRANCH);
Add_Parameter(pl_id,'P_user',TEXT_PARAMETER,:GLOBAL.user);
     repid := find_report_object('REPORTOBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_open_balance.RDF');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
          v_rep := RUN_REPORT_OBJECT(repid, pl_id);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               LOOP
                    rep_status := report_object_status(v_rep);
                         message('Running');
               END LOOP;
          IF rep_status = 'FINISHED' or rep_status is NULL THEN
          WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
          ELSE
               null;
     END IF;
END;

Jeneesh,
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,
'paramform=YES
what about this variable ?
P_VAR1 = ........');

Heading Change in "Report Parameter Form"

Hi,
Is there any way to change Headings and presentation on "Report Parameter Form" in 11g,
as shown in
http://3.bp.blogspot.com/_KYY-OV98iIo/TCnw5J8TEaI/AAAAAAAAAHo/9DnTJTs8now/s1600/here03.bmp
is displaying headings like
"Report Parameters" and "Enter Values for Parameters, Enter Start: , Enter End:"
Can they be user given
Farrukh

The parameter form is inside the report and the layout of it can be altered.
The only exception to if there is an automatic parameter form....but that is not the case in the example
that you have shown.
Dave

Report Parameter Form not displayed

When I ran a report using the following procedure code in web-enabled Oracle forms ,
PROCEDURE RUN_REPORT IS
pl_id ParamList;
BEGIN
pl_id := get_parameter_list('tmpdata');
if not id_null(pl_id) then
destroy_parameter_list(pl_id);
end if;
pl_id := create_parameter_list('tmpdata');
add_parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'YES');
run_product(REPORTS, 'D:\ORACLE\DIVISION', SYNCHRONOUS, runtime, FILESYSTEM, pl_id, NULL);
END;
No parameter form was displayed. What do you suspect? Or report parameter form cannot be used in web-enabled Oracle forms.
Hope some experts here broaden my mind!
Many thanks,
Richard

Richard,
passing paramform=yes will do it. However, beside of that I wouldn't recommedn using run_product for reports on the Web, indeed paraneter forms are a bit tricky and don't work out of the box. There is a work around that i documented in a Forms/Reports integration Whitepaper available in teh Forms6i collateral section on otn.oracle.com/products/forms. This description uses run_report_object, addressing the Reports Server.
Frank

Help with 10g Reports Parameter form Fonts

Similar Messages

Maybe you are looking for