Help with 655 Max and Possible Memory Problems...

Just recieved my 655 Max and have put my system together, but when I turn it on it makes a constant beeping sound. I tried taking out both memory sticks, lol, and turning it on and the sound stops, I tried putting in one memory stick and the sound starts again.
I suppose this is a memory problem.
by the way I am using Corssair 256mb CMX256a-3200C2 memory.

[The alarm that you are getting is the CPU Fan Alarm you will have to diable it in the Bios. I am using a Vantec Aeroflow heatsink and my CPU alarm also is constantly on and was very annoying till I disabled it. My system still doesn't boot to XP yet as I have RMA'd bothe the MB and Ram. QUOTE]Originally posted by TritonB7
Hey Kaiguy the comp does continue to make sounds till I shut the system off. And I'm not sure how a standard pc tone sound would sound like, :(. But it does make beep followed by a lower pitched beep, and it repeats this till I shutdown the system.
(1) I cannot Access Bios.
(2) I have two sticks of Corsair 256mb CMX256a-3200C2 memory. I do not have any other ram available that will be compatible with this motherboard. Ive tried using one stick at a time in each of the slots. No Luck.
I highly think that both sticks not working is very unreal.
(3) and reseting bios by the jumper isnt working either.
I can probably try buying some diffrent memory, or returning the whole mobo and exchanging it for the same one.
By the way on my monitor when i turn the comp on it says 8x Extreme or something close to it while the comp is beeping. I doubt that, that has anything to do with it. This is my first MSI board :( , I've always been an Asus person but Im still open for MSI i'm sure I just recieved a faulty board.
[/QUOTE]

Similar Messages

Need help with new build. Possible gpu problem?

MSI 970a-g45 board. This is my second build with the same board, but i am using a different GPU this time and i am unable to get the signal to the monitor. my psu is an OCZ ModXStream Pro Power Supply - 500-Watt and the specs are as follows. Wattage    500W
SLI/Crossfire    SLI Ready
Energy Efficiency    80 PLUS
Fan    140 mm
+3.3V    25 A
+5V    25 A
+12V 1    18 A
+12V 2    18 A
-12V    0.3 A
+5VSB    2.5 A
my gpu is an MSI N440GT-MD1GD3/LP
RAM corsair Vengeance 1600mhz 8 gigs
cpu AMD fx 4100 3.6 ghz, quad core
the only difference in this build from my last is the gpu. so its making me think something wrong with it..
Any help would be greatly appreciated.

do you have access to your 1st PC to swap parts for tests?

Help with update issues and resulting boot problems

Ok so I have arch installed and can get through all the updating except for glibc..I know there are countless post on the subject and I have spent the past two days reading through them. I have also broken my system and have done about 15 re-installs trying to get through this. Also, after I update (excluding glibc) and re-boot I get the root device cannot be found error and am dropped to a shell.
What I am asking is, can someone PLEASE give me a straight forward answer on how to fix this stuff...I'm tired of reading and re-installing.
I'd appreciate any help you can give..

If you're using the most recent iso, the /lib to /usr/lib move has already been taken care of, so none of those countless bbs threads (or the infinitely superior official advice from the devs) apply any more. Please post the exact commands you are using and the exact error messages you are seeing.

Need help with Apple ID and broken phone problem!!

My iPhone is broken and apple are goin to exchange it for a new one. Thing is before they do this they need my apple I'd and password. I thought I had forgot and wouldn't mind as av had two id's. Now I think I might mind it, but since I can't check my phone is there any other way of finding out if this is the one connected to my phone? Maybe by seriel number or phone number..

Welcome to the Apple Community Frances.
You may be able to find your Apple ID at Look up your old and forgotten Apple ID

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchsed a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears ro work but I am being told there are updates. I hav

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchased a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears to work but when I try to update, although I am being told there are updates it attempts to download the update but then tells me there is a problem and to quit and try again later.. I have tried a number of times to download the updates but itkeeps telling me to quit and try later. what is wrong please?

There could be a 32 bit vs 64 bit issues-is the old machine a 32 bit? and what is the new machine as far as 32/64 bit. I am not sure now if CS5 has in the help menu of the PS app the selection to update within PS if so that might work. I know that the Creative cloud app for installs updates etc has caused me much consternation over the last couple few years. Last it could be something like your Software firewall settings or anti-virus anti malware programs. I know that updating the infamous adobe flash that Internet Explorer pop ups setting and having AV turned on as opposed to off can interfere or plain break the update ability

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

Help with photoshop quitting and AMD graphics

help with photoshop quitting and AMD graphics
im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though

Hi Chris
I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
its frustrating as i am paying for CC but cant use it!

Oracle 11g with cocoon.war and glassfish pdf problem?

Hi all,
I m install oracle 11g express on CentOS 5.6 OS, oracle apex listener 1.1.2.131.15
glassfish v2 and cocoon 2.1.11 and connect glasfish with oracle apex and working fine
Problem begin when I was build cocon xml and deploy cocoon.war on glassfish,
adding fop_post on cocoon/fop_post (as describe on http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html) but pdf dont work!
(I was setting all this steps on open suse 11.2-32 byte machine and ubuntu 8.04-32 byte and pdf work ok )
Is there any idea whats happen whith this pdf error?
Is problem with 64 byte some specific settings, with java jdk, cocoon, glassfish or something on oracle 11g apex ?
Gordan
Edited by: useruseruser on Jun 20, 2011 9:49 PM

Udo wrote:
Hi Gordon,
what kind of error do you receive? And did you receive any error when building the cocoon.war with the 64bit Java? And which JDK are you using anyway?
-Udo
>Hi Gordon,
what kind of error do you receive? And did you receive any error when building the cocoon.war with the 64bit Java? And which JDK are you using anyway?
-Udo
Hi Udo
When I make export to pdf from report theres error Could not open file ///tmp/Report-1.pdf
I was installing on OpenSuse 11.3 oracle 11g 64 based OS and oracle
next I was download and unzip and build cocoon2.1.11 as bash build.sh war -- and in build folder theres make cocoon.war
next I was download apex listener and from command line I was type java -jar apex.war
next download and build glassfish v2 and this two war files I was deploy on server, and making username as describe
in apex listener conf documentations, so apex working good over glassfish only cocoon cant create pdf
giving me error Could not open file ///tmp/Report-1.pdf. and jdk is 1.6 26 64 byte
error messages from open suse 11.3 64 byte on cocoon/fop_post>
An error has occured
org.apache.cocoon.ProcessingException: Unknown request object encountered named template : null
Cocoon stacktrace[hide]
Exception in StreamGenerator.generate()
context://fop_post/sitemap.xmap - 17:32     <map:serialize type="xml">
context://fop_post/sitemap.xmap - 13:33     <map:generate type="stream">
Unable to get transformer handler for cocoon://fop_post/xsl
context://fop_post/sitemap.xmap - 38:37     <map:serialize type="fo2pdf">
context://fop_post/sitemap.xmap - 31:39     <map:transform>
context://fop_post/sitemap.xmap - 30:38     <map:generate>
context://sitemap.xmap - 1055:92     <map:mount>
Java stacktrace[show]
org.apache.cocoon.ProcessingException: Unknown request object encountered named template : null
     at org.apache.cocoon.generation.StreamGenerator.generate(StreamGenerator.java:122)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.processXMLPipeline(AbstractProcessingPipeline.java:579)
     at org.apache.cocoon.components.pipeline.impl.AbstractCachingProcessingPipeline.processXMLPipeline(AbstractCachingProcessingPipeline.java:280)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.process(AbstractProcessingPipeline.java:780)
     at org.apache.cocoon.components.source.impl.SitemapSource.toSAX(SitemapSource.java:414)
     at org.apache.cocoon.components.xslt.TraxProcessor.sourceToSAX(TraxProcessor.java:306)
     at org.apache.cocoon.components.xslt.TraxProcessor.getTransformerHandlerAndValidity(TraxProcessor.java:241)
     at org.apache.cocoon.transformation.TraxTransformer.setup(TraxTransformer.java:331)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.setupPipeline(AbstractProcessingPipeline.java:398)
     at org.apache.cocoon.components.pipeline.impl.AbstractCachingProcessingPipeline.setupPipeline(AbstractCachingProcessingPipeline.java:718)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.preparePipeline(AbstractProcessingPipeline.java:501)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.process(AbstractProcessingPipeline.java:453)
     at org.apache.cocoon.components.treeprocessor.sitemap.SerializeNode.invoke(SerializeNode.java:144)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.SwitchSelectNode.invoke(SwitchSelectNode.java:104)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:47)
     at org.apache.cocoon.components.treeprocessor.sitemap.MatchNode.invoke(MatchNode.java:108)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelineNode.invoke(PipelineNode.java:143)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelinesNode.invoke(PipelinesNode.java:93)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:235)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:177)
     at org.apache.cocoon.components.treeprocessor.TreeProcessor.process(TreeProcessor.java:254)
     at org.apache.cocoon.components.treeprocessor.sitemap.MountNode.invoke(MountNode.java:118)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:47)
     at org.apache.cocoon.components.treeprocessor.sitemap.MatchNode.invoke(MatchNode.java:108)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelineNode.invoke(PipelineNode.java:143)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelinesNode.invoke(PipelinesNode.java:93)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:235)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:177)
     at org.apache.cocoon.components.treeprocessor.TreeProcessor.process(TreeProcessor.java:254)
     at org.apache.cocoon.Cocoon.process(Cocoon.java:699)
     at org.apache.cocoon.servlet.CocoonServlet.service(CocoonServlet.java:1154)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Java full stacktrace[show]
org.apache.cocoon.ProcessingException: Unable to get transformer handler for cocoon://fop_post/xsl
     at <map:serialize type="fo2pdf"> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/fop_post/sitemap.xmap:38:37
     at <map:transform> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/fop_post/sitemap.xmap:31:39
     at <map:generate> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/fop_post/sitemap.xmap:30:38
     at <map:mount> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/sitemap.xmap:1055:92
     at org.apache.cocoon.transformation.TraxTransformer.setup(TraxTransformer.java:339)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.setupPipeline(AbstractProcessingPipeline.java:398)
     at org.apache.cocoon.components.pipeline.impl.AbstractCachingProcessingPipeline.setupPipeline(AbstractCachingProcessingPipeline.java:718)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.preparePipeline(AbstractProcessingPipeline.java:501)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.process(AbstractProcessingPipeline.java:453)
     at org.apache.cocoon.components.treeprocessor.sitemap.SerializeNode.invoke(SerializeNode.java:144)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.SwitchSelectNode.invoke(SwitchSelectNode.java:104)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:47)
     at org.apache.cocoon.components.treeprocessor.sitemap.MatchNode.invoke(MatchNode.java:108)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelineNode.invoke(PipelineNode.java:143)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelinesNode.invoke(PipelinesNode.java:93)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:235)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:177)
     at org.apache.cocoon.components.treeprocessor.TreeProcessor.process(TreeProcessor.java:254)
     at org.apache.cocoon.components.treeprocessor.sitemap.MountNode.invoke(MountNode.java:118)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:47)
     at org.apache.cocoon.components.treeprocessor.sitemap.MatchNode.invoke(MatchNode.java:108)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelineNode.invoke(PipelineNode.java:143)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelinesNode.invoke(PipelinesNode.java:93)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:235)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:177)
     at org.apache.cocoon.components.treeprocessor.TreeProcessor.process(TreeProcessor.java:254)
     at org.apache.cocoon.Cocoon.process(Cocoon.java:699)
     at org.apache.cocoon.servlet.CocoonServlet.service(CocoonServlet.java:1154)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: org.apache.excalibur.xml.xslt.XSLTProcessorException: Exception when creating Transformer from cocoon://fop_post/xsl
     at org.apache.cocoon.components.xslt.TraxProcessor.getTransformerHandlerAndValidity(TraxProcessor.java:300)
     at org.apache.cocoon.transformation.TraxTransformer.setup(TraxTransformer.java:331)
     ... 56 more
Caused by: org.apache.cocoon.ProcessingException: Exception in StreamGenerator.generate()
     at <map:serialize type="xml"> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/fop_post/sitemap.xmap:17:32
     at <map:generate type="stream"> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/fop_post/sitemap.xmap:13:33
     at org.apache.cocoon.components.source.impl.SitemapSource.toSAX(SitemapSource.java:424)
     at org.apache.cocoon.components.xslt.TraxProcessor.sourceToSAX(TraxProcessor.java:306)
     at org.apache.cocoon.components.xslt.TraxProcessor.getTransformerHandlerAndValidity(TraxProcessor.java:241)
     ... 57 more
Caused by: org.apache.cocoon.ProcessingException: Exception in StreamGenerator.generate()
     at <map:serialize type="xml"> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/fop_post/sitemap.xmap:17:32
     at <map:generate type="stream"> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/fop_post/sitemap.xmap:13:33
     at org.apache.cocoon.generation.StreamGenerator.generate(StreamGenerator.java:163)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.processXMLPipeline(AbstractProcessingPipeline.java:579)
     at org.apache.cocoon.components.pipeline.impl.AbstractCachingProcessingPipeline.processXMLPipeline(AbstractCachingProcessingPipeline.java:280)
     at org.apache.cocoon.components.pipeline.AbstractProcessingPipeline.process(AbstractProcessingPipeline.java:780)
     at org.apache.cocoon.components.source.impl.SitemapSource.toSAX(SitemapSource.java:414)
     ... 59 more
Caused by: org.apache.cocoon.ProcessingException: Unknown request object encountered named template : null
     at org.apache.cocoon.generation.StreamGenerator.generate(StreamGenerator.java:122)
     ... 63 more
The Apache Cocoon Project
and other error from CentOS 64 byte same cocoon/fop_post >
Resource not found
org.apache.cocoon.ResourceNotFoundException: No pipeline matched request: fop_post/
<map:mount> - context://sitemap.xmap - 1055:92
Cocoon stacktrace[hide]
No pipeline matched request: fop_post/
context://sitemap.xmap - 1055:92     <map:mount>
Java stacktrace[show]
org.apache.cocoon.ResourceNotFoundException: No pipeline matched request: fop_post/
     at <map:mount> - file:///home/nadrog/glassfish/domains/domain1/applications/j2ee-modules/cocoon/sitemap.xmap:1055:92
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelineNode.invoke(PipelineNode.java:149)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelinesNode.invoke(PipelinesNode.java:93)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:235)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:177)
     at org.apache.cocoon.components.treeprocessor.TreeProcessor.process(TreeProcessor.java:254)
     at org.apache.cocoon.components.treeprocessor.sitemap.MountNode.invoke(MountNode.java:118)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:47)
     at org.apache.cocoon.components.treeprocessor.sitemap.MatchNode.invoke(MatchNode.java:108)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelineNode.invoke(PipelineNode.java:143)
     at org.apache.cocoon.components.treeprocessor.AbstractParentProcessingNode.invokeNodes(AbstractParentProcessingNode.java:69)
     at org.apache.cocoon.components.treeprocessor.sitemap.PipelinesNode.invoke(PipelinesNode.java:93)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:235)
     at org.apache.cocoon.components.treeprocessor.ConcreteTreeProcessor.process(ConcreteTreeProcessor.java:177)
     at org.apache.cocoon.components.treeprocessor.TreeProcessor.process(TreeProcessor.java:254)
     at org.apache.cocoon.Cocoon.process(Cocoon.java:699)
     at org.apache.cocoon.servlet.CocoonServlet.service(CocoonServlet.java:1154)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
The Apache Cocoon Project
All this steps above, I was making with open suse 32 byte, with oracle 32 byte 10g with
apex listener, cocoon and glassfish and apex and pdf export working good.
is there any idea, whats solution for 64 byte cocoon, apex listener oracle express pdf export?
regards
Gordan
Edited by: useruseruser on Jun 23, 2011 9:09 AM

Problems with 655-MAX FISR

I have an MSI 655-MAX FISR motherboard and I installed a Radeon 9000 128mb Pro on it. I play counter-strike alot and on my old pc, like 2 or 3 months before I built this one it started to skip and I got this motherboard and it skips on counter-strike too. I play for like 10-15 seconds then I freeze for like 5-10 then I play for like 10-15 seconds again and so on. I have tried a Radeon 9700 Pro 128mb and it does the same thing and I have also tried different ram and it does the same thing. What could be causing this problem? Is it the fact that this motherboard only works with Geforce cards ? Plz help me! Thanks.
My Rig :
Pentium 4 2.41 GHZ with 533FSB
80 Gig Maxtor HD
550 Watt Power Supply
Radeon 9000 128mb Pro
512mb PC2100 266mhz - also tried 512mb PC2700 333mhz together and seperate
Kingwin K-11 Case

Did that already, when I uninstalled the drivers for 9000 and put in 9700 but it still did the same thing. What else could be the problem, I have tried alot of things and don't know what else to do. Help Plz :(

Help with "gapless plaayback " and "syncing" problems

ok....i just restored my ipod to factory settings after it would restart at random intervals. After everything was erased, it loaded only my playlists, and then went on a "analyzing gapless playback Info" for a bit, then upload 2 or 3 more songs, then pop up an error message saying that "SONG "a" COULD NOT BE IMPORTED TO CRUCHIES IP" and would not load anymore songs. then, it would start cutting songs in half to different tracks..i only have 325 out of 3000 and i am angry.i need help with this... i dont want to have to re-install itunes, because i figure it would erase my perchases fron the itunes store.?/?/?/? or do i not haave a choice? has anyone else had this problem??? please give any info you can.

*I'm at work at the moment*
I bought 2 kits of the Corsair value ram (see sig for part number), 512 mg sticks, total 4 sticks. When you say just put 2 matching ones in, I think I did that. I tried 2 sticks at a time, switching them out so I'm pretty sure I tried all combinations of them and the pc wouldn't boot using 800fsb and 667 ram speed. It will boot and run ok at 667 FSB and 400 ram speed, because I've been using it like that since about the 2nd week of Nov. Will try again to just boot using 2 mem modules at full FSB/Mem speed but I know I've tried that before and the pc would lock. Not for sure what you meant by 'matching' as all 4 are the same brand/model etc.
As for the EIT? or whatever it was, I don't recall clicking that anywhere , is that a BIOS option? I'll check when I get home but I'm not recalling choosing that option. Google showed that to be some some of processor power saving option or something.
As for linking where I bought them at, I got them from Newegg. Newegg doesn't have the MB anymore, they have a refurbished unit but here's the link to the MSI page
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=663 , here's a link to the refurb one on Newegg
http://www.newegg.com/Product/Product.asp?Item=N82E16813130501R
The ram is http://www.corsairmemory.com/corsair/valueselect.html#ddr2dimm the 2nd one under pc2-5300, the VS1GBKIT667D2. I bought 2 of those kits. Newegg link http://www.newegg.com/Product/Product.asp?Item=N82E16820145568
What I've read on the support pages, MSI supports that ram and the ram shows that MB as being supported.
Appreciate the replys.

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Hello I have a few questions and I need some help with my iTunes and iPod

Hello iTunes people.
I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech friends already had put the program onto my PC so I did not even have to download it. Anyways I put my life's collection of mp3's onto iTunes and then syncs it with my iPod and it worked great. Here is my problem. I just recently bought a MONSTER PC. I have lovingly named it " ED209 " I downloaded iTunes for it and I have the most up to date version.8.1.1 is the most current version correct? Ok well here is my problem. What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library. I DO NOT want to import anything from the library or playlist or whatever you call it ONTO the iPod because there is nothing in the library. Now this is were its gets weird and possibly silly. A person I was chatting with on Facebook sort of made fun of me because she was like " Dude! Just push " Sync " But the reason I am paranoid is because THIS is the message I get....
" The iPod " Aaron's iPod " is synced with another iTunes library. Do you want to erase this ipod and sync with this iTunes library? "
HOLY COW!! That girl on Facebook was making fun of me but READ THAT. That exactly says ERASE the "iPod" and Sync with THIS library " It does not say put what is ON the iPod into THIS Library. It says it the other way around. Clear as day it says it will ERASE the " Ipod " it does not say " Fill the library with whats on your iPod "
Do I all of a sudden not understand English or something???? I know how to freaking read and from what it says is sounds a 100 percent like " we will ERASE youe iPod and put everything from this playist or library onto your iPiod" But there is NOTHING in my library? Am I mentally challenged or what?
I hope someone can help me here and I have another request. Could someone just tell me all the cool things I can do with iTunes and my iPod? I am trying to read the help files and the FAQ and whatever else Apple provides you with but it has SO MUCH crap that looks usless. I find myself reading a whole paragraph about some simple little section of s section of a section of a feature! Know what I mean. Someone give me the long and short of the neat things I can do with this stuff. I have windows Vista with a wicked computer that has like 6 gigs of ram and m iPod is a 80 GB Classic
help !!
PROTEUS

*What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library.*
1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

Help with computer setup and PP settings for faster/better previews

I have been using Cyberlink PowerDirector software for video editing. It is very easy to use and can do quite a bit. It was also accelerated by Intel HD graphics built into my system, so I could see a lot of my work at a pretty high resolution in real time.
However, I wanted to see what PP was capable of, specifically the Warp Stabilizer.
So I downloaded PP and have been trying to use it, but it was just slow as heck to preview anything (chop stop chop stop...), with render times being insanely long (12 hours for five minutes of footage vs. about 30 minutes with PowerDirector).
Thinking it was a problem with my system and I needed to get a real graphics card, I got an EVGA GTX 670 (FTW) for $400, and popped it in. I modified the text file so PP would see it as a compatible card, opened up PP and changed the engine to the new card.
Things are faster, but I was expecting a lot more. Here's what I'm doing:
1. Shooting Canon 5D mark II (now III) clips 20-60 seconds long, 1080p.
2. Import to PP and sequence them.
3. Adding effects:
     A. Top adjustment layer for fast color correction (white balance)
     B. Next adjustment layer: 3-way color, shadow/highlight, unsharp mask, fast blur
     C. Video 1 layer has the clips with warp stabilizer applied to each, and dissolves.
My final output will be 720p. ( I shoot 1080p so the Warp Stabilizer will have more to work with, and I can crop without feeling like I'm degrading quality).
My system: i7 2600k, 16GB RAM, GTX 670 graphics, 120GB SSD "Max IOPS", 2TB 7200rpm internal, 2TB 7200rpm external (USB 2.0, backup drive).
I can currently preview at 1/4 res in realtime. I would really like to be able to get to 1/2 res (of course full would be great). One thing that worries me is that GPU-Z indicates that my GPU is only running at about 2% while previewing, while CPU usage is at around 50%. I was under the impression that the Mercury thing would use GPU/CUDA to process previews and effects that are supported (that includes Warp Stabilizer).
I've looked at Sequence Settings and fiddled with Preview File Format and size, but that doesn't seem to do anything. I'm currently looking around at codecs (Cineform, DNxHD), but don't know if those can help.
What settings should I alter to get better previews?

Well I'm still pretty clueless about this, but for anyone who is looking at this and wondering, here's what I've gleaned:
1. After Effects, especially CS6, makes much more and better use of graphics cards than does Premiere Pro. I'm guessing that PP will, in future versions, make better use of them. For now, no need to spend more than a couple hundred bucks on one.
2. Update the software. PP and AE both performed substantially better after installing the .01 update from adobe. After you install the update, be sure to re-do the CUDA hack, if necessary.
3. As it stands, money for a PP system is best spent on a processor, as in the newest Intel (currently Ivy Bridge), and overclocked. This is where performance happens. I'd say on a 2012 system, 16 GB RAM should be considered a minimum for video editing, and 24 or 32 if you can afford it. More than that probably won't be utilized. Hard disks can affect performance, but I don't think it's a bottleneck unless you're doing something that requires VERY fast/large reads and writes (4k source?). Most people who have high-end editing stations also have a bunch of drives in RAID, but if you look at the performance chart, the SECOND highest scoring tester did not use RAID (though did use a presumably fast and large SSD).
Keep in mind that all of this has to do with RENDER speeds. I still don't know what the bottleneck is for PREVIEWS, but I'm just going to assume it's the same.

Help with 655 Max and Possible Memory Problems...

Similar Messages

Maybe you are looking for