Help with a 9000f Mark II

I am runnining Mac Mavericks and I can not get my scanner on. I get a message that I neen to turn the scanner on. I am tech savy, th scanner is on and plugged in. I have delelted the software and re-installed it. Anyone have a fix.

Hello jdyrek.
Please ensure that the unit is connected directly to one of the USB ports on your computer itself. Do not connect the scanner to any external monitors, keyboards, hubs or other extension devices.
If the issue persists, please visit the following link below to contact our support group for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Help with FLASHING QUESTION mark when starting the mac

Hi All,
My mac just froze,i had to do force shut down,when i restarted it i had the flashing question mark.Did all the instruction that are given in the site:restarting with the installation CD and then using the *disc utility*-BUT i could not find the hard drive that i need to do the "repair disc " on.So i did what the document said and i reset the PRAM-still my hard drive does not show up in the disc utility.I also tried to reset the SMC but again -same result.
please please try and help me,is my HD doomed? is there anything else i should try?

I have the exact same problem.
Today, when I turned my macbook on, it was so slow, that I decided to restart it. When I turned it on again, I got the folder with a questionmark in it on the display. Tried to put the installer CD in, but it couldn't find the HDD. Ran the Disk Utility, which said: "Invalid node structure" and "Invalid record count".
I think the HDD is "destroyed", because it makes strange sounds. But how? And why?
The Macbook isn't even a year old.
Any help?

Not able to use Canoscan 9000f Mark II with Photoshop CS6

I have bought a new Canoscan 9000f Mark II, I have installede all software that came with the scanner. But my Photoshop CS6 can't see the scanner.
Can anybody help me?
Henning Karlby, Denmark

You downloaded the twain plugin referenced here and put it in the 32 bit version photoshop cs6?
(twain from photoshop doesn't work on the 64 bit version of photoshop cs6)
http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html
The Twain_32.8BA should go in:
C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Plug-ins

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

So i have a 2011 MacBook Pro and when i turned it on this morning a flashing folder came on with a question mark in the middle of it and it keeps flashing. So i tried googling any solutions and up so far nothing has worked. Please Help ?

I tried googling several solutions, but so far nothing seems to work. Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8. When i do go to the repair disk utility, on the eft hand side shows two hardrives one is Untitled and another is Hitachi, i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer. When i insterted it onto the disc drive it came out under SUPER DRIVE and everytime i double click on the CD it says something about attaching images/ I also forgot to mention that the MAC OSX 10.6.8 Update shows on the left hand side on the bottom in DMG format. I dont know what else to do, please help?

DestroyGalaxies wrote:
a flashing folder came on with a question mark in the middle of it
This is the firmware telling you it can't find a bootable OS X volume.
Usually to solve this all you do is hold the option key down on the built in keyboard while booting the computer, this enters Startup Manager and then you choose OS X to boot, then in System Preferences > Startup Disk you change it to the boot volume and it tells the firmware.
Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8.
What you have is a 10.7 or 10.8 Recovery HD from when 10.7 or 10. was on the machine previously.
The Macintosh HD partition only was erased and 10.6 installed on it, without erasing the entire drive like what should have occured to remove the Recovery HD partition.
So you have a mucked up machine.
i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer.
Well there goes your problem there, your downloading illegal copies of Snow Leopard from a untrusted location.
10.6 is not available for download, except from pirate sites. You likely have malware or a compromised system.
I dont know what else to do, please help?
What you need to do is call Apple via phone, tell them the make of your machine and order the appropriate 10.6 disks, they are inexpensive now. Some machines that came with 10.6.3+ origianlly need machine specific disks, other wise pre-10.6.3 Intel Macs can use the 10.6.3 white retail disks.
Once you have the disks, you need to backup your personal information off the computer to a external storage drive using the emergency quick copy method, then disconnect it to prevent mistakes.
Most commonly used backup methods
Next follow this proceedure and make sure to select the ENTIRE drive on the far left with the drive makers name and size, this will erase the entire drive, then install 10.6 from the disk
How to erase and install Snow Leopard 10.6
When finished setup the machine and log onto the Internet and use Software Update to get current on 10.6.8
Don't use pirated software, it's likely been compromised in some fashion.

Anyone help mac book screen White with a question Mark in the middle of the screen .matthew

Can anyone help my mac book screen has gone White with a question Mark in the middle of the screen .Matthew

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

When i boot i get a flashing folder with a question mark. disk utility doesnt work or read my harddrives to boot with. i installed a new SSD and its not reading that either. i have a macbook pro 2011, any help?

So I came to this problem a while ago. M ycomputer basically froze so I was forced to shut down by holding the button down. When I started it up I got the flashing folder with a question mark. I started it up holding down the command and r keys which brought me to disk utility. Although my computer doesn't read that I have a hard drive to start it up. When I click on the disk utility app, I cannot verify or repair anything either. The buttons won't allow me to click on them. It also shows "Mac OSX Base System" which shows I have files and what not saved. I had been told that I need a new hard drive so I bought and manually installed a OWC SSD 240GB drive and when i booted the computer up it booted up yo the operating system fine with all my files and what not on there. After about twenty minutes, it froze again. I forced a shut down, restarted and the same thing happened. I am not able to choose my SSD to boot up, although thats probably because it doesn't have an operating system installed on it??
i have a Macbook Pro 13" 2011
any help would be great, I'm overall confused.

ryansaint11,
this isn’t Apple support; this is a user-to-user forum. We’re just fellow users of Apple products here.
If you want to boot from your SSD, then you should put the SSD where your HDD currently is, and put the HDD into the optical bay. (That setup will also get you the best performance.) At the moment, you’re still booting from your HDD. Note that you will need to format your SSD in Disk Utility [with the “Mac OS X Extended (Journaled)” format] so that you can install OS X onto it.
Since you have an Early 2011 model, it might or might not have originally come with grey installation DVDs. You will be able to find out whether it did or not by trying to use OS X Internet Recovery to install OS X onto your SSD. If it does not work, or if the installed OS turns out to be Snow Leopard, then it will have originally come with the DVDs, and you should purchase a replacement pair of DVDs from Apple or iFixit; those discs will have your MacBook Pro’s Apple Hardware Test and its iLife apps. If the installed OS turns out to be Lion, then it will not originally have come with the grey installation DVDs, and your Apple Hardware Test will be installed along with Lion, and your iLife apps will be downloadable from the Mac App Store.

Since updating to FF 8 I can no longer use Multirow book marks, can anyone help with this issue?

Since updating to FF 8 I can no longer use Multi-row book marks, can anyone help with this issue? the one I used is here http://multirowbookmarkstoolbar.com/

Try the support site:
*http://multirowbookmarkstoolbar.com/forum
*Multirow Bookmarks Toolbar Plus: https://addons.mozilla.org/firefox/addon/multirow-bookmarks-toolbarplus/

I am having trouble with my MacBook Pro. I get a blank screen with a flashing document file with a question mark in it, yes I have tried to install Mac OS X with the original disk but I get no choices of where I wish to install Mac OS X. Please help ;(

I am having some trouble with my computer, what happened was: I was playing on a game, I played with a magnet, it started to go slower and slower, I pressed F9 then it went slower and then it went to a blank screen with a flashing document with a question mark on it. I tried the original OS X installation disk but when it came to choosing the area of which I save it, it showed no areas.

Startup your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
If the startup disk is not available from that window, you may be able to repair the disk.
Help here > A flashing question mark appears when you start your Mac

File Folder with a Question Mark Blinking-HELP!!!!

Its been like a day and half since i last used my macbook, and all of a sudden it won't work.
It still turns on but it goes to a white screen and stays that way for about 20 minutes. Then a file folder with a question mark in the middle shows up and blinks. It doesnt go away at all. The only way for me to make it go away is to either turn it off or to push the eject button, and now it just turns off all together.
When all this started happening it took a long time for it to even go to the home page, but it didn't go to the desktop screen. It would take a long time on the screen when it first turns on then a a lonnnnngggg time after that it would go to a light blue screen and then a longgggg time after that a pointer would show up, and thats all it would do.
Do I need to get the software that first came with it and put it in and see if it fixes the problem or what?
WHAT SHOULD I DO?!?!? please help.

You have corrupted system files. The following is a solution:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

File icon with ? mark on it means it can't read from the hard drive. The hard drive is now wiped or bad. If just wiped then you will need to reinstall your operating system, OS X. If bad you will need to replace the drive.
Start with booting the computer from the OS X install DVD that came with your system. If the Mac came with Lion Pre-Installed then you use the Lion internet recovery system to reinstall (Hold down Command+r keys or Command+Option+r keys to boot the computer from over the internet to the Lion recovery HD system).
Good Luck.

I can't restart my mac , I get a file with a question mark? Help

Need help, what to do when I cannot restart my mac. I get a file with a question mark?

That indicates that your Mac is unable to find a system to boot from
This is usually caused be either a corrupt system file, corrupt ot dead disk drive
Allan

I have a older intel MacBook pro, now when I try to start up instead of the apple logo I see a file folder with a question mark. Need some help please.

I have a first gen MacBook pro with intel chip. All of a sudden when I try to start up instead of the apple logo I see a file folder with a question mark. Phone support wasn't much help since it is a older machine. It's either a software issue or the hard drive went. Any ideas on how to fix if it's a software issue would be appreciated. Thanks a lot.

Thanks I tried that and when I click repair it tells me
Invalid volume header
Checking hfs plus volume.
Invalid b-free node size
Volume check failed
Error: the underlying task reported faliure on exit.
1 hfs volume checked
1 volume could not be repaired because of an error.

Folder icon with a question mark now won't boot at all help?

I get a folder icon with a question mark now it says shut down and reboot keeps doing that over and over
Please help!

clifffromhomosassa,
Your system cannot find the startup volume. This can be caused by many things including a failed HD. Please look over and trouble shoot using the Apple Flashing question mark appears when you start your Mac letter.

I accidentally pushed the power button of my macbookpro... it restarted but doesnt open... what appears now is a flashing FOLDER logo with a QUESTION MARK on it.. can someboby help me to fix this?

i accidentally pushed the power button of my macbookpro... it restarted but doesnt open... what appears now is a flashing FOLDER logo with a QUESTION MARK on it.. can someboby help me to fix this?

(Assuming you don't have a firmware boot lock set)
First easy step...
1. Shut down the computer if it's on (hold the power button down... until it shuts off)
2. Press the power button
3. Immediately press AND hold the Option key ASAP
Hold until drive option images appear in a single row across the screen. Typically most people running 10.7 or 10.8 will see 2 drive options to boot from: the main volume they usually boot from, and a recovery volume. If your main volume pops up. Use the cursor or arrow keys to highlight/select the main volume and press enter. That should boot your main volume. Let me know what you get from this point... I'll give you more as you go along.

Help with a 9000f Mark II

Similar Messages

Maybe you are looking for