Help with a basic query

Hello
I am looking at a set of records and need to query them but cannot work out what syntax to use to get the desired result.
This is the query for the basic data
SELECT
SCE_STUC,
SCE_CRSC,
SCE_STAC
FROM SRS_SCE
WHERE SCE_AYRC = '2009/0'
and Sce_stuc LIKE '0702794'
This gives:
SCE_STUC SCE_CRSC SCE_STAC
0702794     OAKC3ZSKG     C
0702794     UBSH1BINS W
0702794     UBSH1WIDS C
So I need to create a query that shows where a person (sce_stuc) has a C status for sce_crsc OAKC3ZSKG but also has another SCE_CRSC not OAKC3ZSKG that is not status C.
I am using Oracle SQL developer btw
Any help much appreciated

Hi thanks for these
So I am looking for people that are C on course OAKC3ZSKG but have a record that is not C for another course this could be an In ('W','N') etc.
Sorry I have not been that clear so looking to return:
SCE_STUC SCE_CRSC SCE_STAC
*0702794     UBSH1BINS      W*
where the student has
SCE_STUC SCE_CRSC SCE_STAC
0702794     OAKC3ZSKG     C
0702794     OAKC3ZSKG     C
0702794     UBSH1BINS     W
Again many thanks

Similar Messages

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Help with an SQL Query on the Logger

We are running UCCE 8.5(3) and need help with an SQL query. When I run the below I would also like to see skill group information(name preferably)? Any help would be greatly appreciated!
select * from dbo.t_Termination_Call_Detail where DateTime between '10-11-2012 00:00:00:00' and
'10-11-2012 23:59:59:59'

David, thanks for replying. Unfortunitly I don't know enough about SQL to put that into a query and have it return data. Would you be able to give an example on what the query would look like?

Help with a PowerPivot query

Hi,
I've got a server audit log in PowerPivot (114,000 rows) which I provide some basic reporting from (PowerPivot is not my specialist subject so go easy). What I now need to perform a Distinct filter, but can't get the logic right. Basically the log
as two bits of information, 1) is the source of the job and 2) if it was a success or failure. What I need to do is to find all of the Source items that have never completed sucessfully. Any ideas on what formula is best to use, or
do I need to split in to multiple sheets and create a table relationship?
Source,Status
======,======
Source1,Fail
Source1,Fail
Source1,Success
Source2,Fail
Source3,Fail
Source3,Success
So in the above example, I would only expect the filter to show me Source2
Thanks
Alex

Hi Alex,
using Power Query instead, it would work like this:
Once you've pushed your table to PQ, add a column "helper" with value=1.
Then pivot on "Status", taking "helper"-column into "values column"
(hope translation is understandable, as I'm using localized Version & translation via "Quick info" isn't working in the PQ menu)
Then filter on column "Success" = blank.
Imke

Help with Inner Join query in SQL

Hope someone can help with this, as this is quite an involved project for me, and I'm just about there with it.
My table structure is :
table_packages
packageID
package
packageDetails
etc
table_destinations
destinationID
destination
destinationDetails
etc
table_packagedestinations
packageID
destinationID
..so nothing that complicated.
So the idea is that I can have a package details page which shows the details of the package, along any destinations linked to that package via the packagedestinations table.
So this is the last part really - to get the page to display the destinations, but I'm missing something along the way....
This is the PHP from the header, including my INNER JOIN query....
PHP Code:
<?php
$ParampackageID_WADApackages = "-1";
if (isset($_GET['packageID'])) {
$ParampackageID_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
$ParamSessionpackageID_WADApackages = "-1";
if (isset($_SESSION['WADA_Insert_packages'])) {
$ParamSessionpackageID_WADApackages = (get_magic_quotes_gpc()) ? $_SESSION['WADA_Insert_packages'] : addslashes($_SESSION['WADA_Insert_packages']);
$ParampackageID2_WADApackages = "-1";
if (isset($_GET['packageID'])) {
$ParampackageID2_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
mysql_select_db($database_connPackages, $connPackages);
$query_WADApackages = sprintf("SELECT packageID, package, costperpax, duration, baselocation, category, dateadded, agerange, hotel, educational_tours, field_trips, corporate_outings, plant_visits, budget_package, rollingtours, teambuilding, description, offer FROM packages WHERE packageID = %s OR ( -1= %s AND packageID= %s)", GetSQLValueString($ParampackageID_WADApackages, "int"),GetSQLValueString($ParampackageID2_WADApackages, "int"),GetSQLValueString($ParamSessionpackageID_WADApackages, "int"));
$WADApackages = mysql_query($query_WADApackages, $connPackages) or die(mysql_error());
$row_WADApackages = mysql_fetch_assoc($WADApackages);
$totalRows_WADApackages = mysql_num_rows($WADApackages);
$colname_educationalDestinations = "1";
if (isset($_GET['PackageID'])) {
$colname_educationalDestinations = (get_magic_quotes_gpc()) ? packageID : addslashes(packageID);
mysql_select_db($database_connPackages, $connPackages);
$query_educationalDestinations = sprintf("SELECT * FROM destinations INNER JOIN (packages INNER JOIN packagedestinations ON packages.packageID = packagedestinations.packageID) ON destinations.destinationID = packagedestinations.destinationID WHERE packages.packageID = %s ORDER BY destination ASC", GetSQLValueString($colname_educationalDestinations, "int"));
$educationalDestinations = mysql_query($query_educationalDestinations, $connPackages) or die(mysql_error());
$row_educationalDestinations = mysql_fetch_assoc($educationalDestinations);
$totalRows_educationalDestinations = mysql_num_rows($educationalDestinations);
?>
And where I'm trying to display the destinations themselves, I have :
<table>
        <tr>
                 <td>Destinations :</td>
            </tr>
           <?php do { ?>
        <tr>
             <td><?php echo $row_educationalDestinations['destination']; ?></td>
        </tr>
        <?php } while ($row_educationalDestinations = mysql_fetch_assoc($educationalDestinations)); ?>
</table>
If anyone could have a quick look and help me out that would be much appreciated - not sure if its my SQL at the top, or the PHP in the page, but either way it would be good to get it working.
Thanks.

First off, you need to get the database tables so that there is a relationship between them.
In fact, if there is a one to one relationship, then it may be better to store all of your information in one table such as
table_packages
packageID
package
packageDetails
destination
destinationDetails
etc
If there is a one to many relationship, then the following would be true
packages
packageID
package
packageDetails
etc
destinations
destinationID
packageID
destination
destinationDetails
etc
The above assumes that there are many destinations to one package with the relationship coloured orange.
Once you have the above correct you can apply your query as follows
SELECT *
FROM packages
INNER JOIN destinations
ON packages.packageID = destinations.packageID
WHERE packages.packageID = %s
ORDER BY destination ASC
The above query will show all packages with relevant destinations

Need help with LikeFilter for querying the keyset instead of value

Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.

NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM

Help with a group query

I have the following table
EX_ID
EX_NAME
EX_SURNAME
EX_FLAG
1
TOM
JONES
Y
1
JIM
SLIM
N
1
BO
SELECTA
Y
2
AIRES
BEARS
N
2
JIM
DAVIES
Y
3
PAUL
BALL
N
3
YOU
KNOW
N
I need to create a query that only displays one of the ex_id’s, it doesn’t matter which one. When the query has been run it will look like below:
EX_ID
EX_NAME
EX_SURNAME
EX_FLAG
1
TOM
JONES
Y
2
AIRES
BEARS
N
3
YOU
KNOW
N
Can anyone help with this query?

SELECT * FROM
SELECT *,ROW_NUMBER () OVER (PARTITION BY ex_id ORDER BY (SELECT 0))
FROM tbl
) AS Der WHERE rn=1
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

I need help with a SELECT query - help!

Hello, I need help with a select statement.
I have a table with 2 fields as shown below
Name | Type
John | 1
John | 2
John | 3
Paul | 1
Paul | 2
Paul | 3
Mark | 1
Mark | 2
I need a query that returns everything where the name has type 1 or 2 but not type 3. So in the example above the qery should bring back all the "Mark" records.
Thanks,
Ian

Or, if the types are sequential from 1 upwards you could simply do:-
SQL> create table t as
2 select 'John' as name, 1 as type from dual union
3 select 'John',2 from dual union
4 select 'John',3 from dual union
5 select 'Paul',1 from dual union
6 select 'Paul',2 from dual union
7 select 'Paul',3 from dual union
8 select 'Paul',4 from dual union
9 select 'Mark',1 from dual union
10 select 'Mark',2 from dual;
Table created.
SQL> select name
2 from t
3 group by name
4 having count(*) <= 2;
NAME
Mark
SQL>Or another alternative if they aren't sequential:
SQL> ed
Wrote file afiedt.buf
1 select name from (
2    select name, max(type) t
3    from t
4    group by name
5    )
6* where t < 3
SQL> /
NAME
Mark
SQL>Message was edited by:
blushadow

Help with the problem query

Hi,
I have another query running slow when executed from cognos. It is also not returning any output continues to execute,
with "Union15" as (
select distinct CASE WHEN(substr(to_char(FLOOR("EES_ENERGY_MASTER"."DISC_MON"/100)), 1, 4) IS NULL) OR (case substr(to_char(FLOOR("EES_ENERGY_MASTER"."DISC_MON"/100)), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end IS NULL) THEN NULL ELSE (substr(to_char(FLOOR("EES_ENERGY_MASTER"."DISC_MON"/100)), 1, 4)||case substr(to_char(FLOOR("EES_ENERGY_MASTER"."DISC_MON"/100)), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end ) END "QUARTER", "EES_ENERGY_MASTER"."PAT_KEY" "Cases_Using_Energy", 0 "Total_Cases"
from "MDM_DBA"."EES_ENERGY_MASTER" "EES_ENERGY_MASTER", "MDM_DBA"."EES_CONS_PROV" "EES_CONS_PROV"
where "EES_ENERGY_MASTER"."DISC_MON">=2006101 and "EES_ENERGY_MASTER"."PDCT_CAT"='Energy' and substr("EES_ENERGY_MASTER"."ICD_CODE", 1, 2)='68-gyn' and "EES_ENERGY_MASTER"."MANUFACTURER"='EES' and "EES_CONS_PROV"."CONS_06_09_YN" in ('N', 'Y') and "EES_ENERGY_MASTER"."PROV_ID"="EES_CONS_PROV"."PROV_ID" union
select CASE WHEN(substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 1, 4) IS NULL) OR (case substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end IS NULL) THEN NULL ELSE (substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 1, 4)||case substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end ) END "QUARTER", 0 "Cases_Using_Energy", count("MVW_EES_ICD_STATS"."CASES") "Total_Cases"
from "MDM_DBA"."MVW_EES_ICD_STATS" "MVW_EES_ICD_STATS", "MDM_DBA"."EES_CONS_PROV" "EES_CONS_PROV", "MDM_DBA"."EES_HOSP_CHG_PROV" "EES_HOSP_CHG_PROV"
where "MVW_EES_ICD_STATS"."DISC_QTR">=20061 and "MVW_EES_ICD_STATS"."ICD_GROUP"='68-gyn' and "EES_CONS_PROV"."CONS_06_09_YN" in ('N', 'Y') and "EES_HOSP_CHG_PROV"."PDCT_CAT"='Energy' and "EES_HOSP_CHG_PROV"."MANUFACTURER"='EES' and "MVW_EES_ICD_STATS"."PROV_ID"="EES_CONS_PROV"."PROV_ID" and "MVW_EES_ICD_STATS"."PROV_ID"="EES_HOSP_CHG_PROV"."PROV_ID"
group by CASE WHEN(substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 1, 4) IS NULL) OR (case substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end IS NULL) THEN NULL ELSE (substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 1, 4)||case substr(to_char(FLOOR("MVW_EES_ICD_STATS"."DISC_QTR")), 5, 1) when '1' then 'Q1' when '2' then 'Q2' when '3' then 'Q3' when '4' then 'Q4' end ) END)
select "T1"."C0" "levelkey", "T1"."C1" "Cases_Using_Energy", "T0"."C0" "Cases_Using_Energy1", "T1"."C2" "Total_Cases"
from (
select count(distinct "Union15"."Cases_Using_Energy") "C0"
from "Union15") "T0", (
select "Union15"."QUARTER" "C0", count(distinct "Union15"."Cases_Using_Energy") "C1", sum("Union15"."Total_Cases") "C2"
from "Union15"
group by "Union15"."QUARTER") "T1"The explain plan is as follows,
PLAN_TABLE_OUTPUT
| Id | Operation                             | Name                        | Rows | Bytes |TempSpc| Cost |
|   0 | SELECT STATEMENT                      |                              |     1 |    50 |       |    22 |
|   2 | TEMP TABLE TRANSFORMATION            |                              |       |       |       |       |
|   1 |   RECURSIVE EXECUTION                 | SYS_LE_2_0                   |       |       |       |       |
|   0 |    INSERT STATEMENT                   |                              | 3053 |   128K|       | 1372 |
|   1 |     LOAD AS SELECT                    |                              |       |       |       |       |
|   2 |      SORT UNIQUE                      |                              | 3053 |   128K|   376K| 1372 |
|   3 |       UNION-ALL                       |                              |       |       |       |       |
|* 4 |        HASH JOIN                      |                              | 3052 |   128K|       |   185 |
|* 5 |         TABLE ACCESS FULL             | EES_CONS_PROV                |   622 | 3732 |       |     2 |
|* 6 |         TABLE ACCESS BY INDEX ROWID   | EES_ENERGY_MASTER            | 3055 |   110K|       |   182 |
|* 7 |          INDEX RANGE SCAN             | IDX_ENERGY_PDCT_CAT          | 1978 |       |       | 2478 |
|   8 |        SORT GROUP BY                  |                              |     1 |    40 |       | 1160 |
|* 9 |         TABLE ACCESS BY INDEX ROWID   | EES_HOSP_CHG_PROV            |     4 |    72 |       |     1 |
| 10 |          NESTED LOOPS                 |                              |     1 |    40 |       | 1157 |
| 11 |           NESTED LOOPS                |                              |     1 |    22 |       | 1156 |
|* 12 |            TABLE ACCESS BY INDEX ROWID| MVW_EES_ICD_STATS            |     1 |    16 |       | 1155 |
|* 13 |             INDEX RANGE SCAN          | MVWICDSTATS_DISCQTR_IDX      |    13M|       |       | 26068 |
|* 14 |            TABLE ACCESS BY INDEX ROWID| EES_CONS_PROV                |     1 |     6 |       |     1 |
|* 15 |             INDEX UNIQUE SCAN         | EES_CONS_PROV_PK             |     1 |       |       |       |
|* 16 |           INDEX RANGE SCAN            | PROV_ID_IDX_2                |    65 |       |       |     1 |
|   3 |   MERGE JOIN CARTESIAN                |                              |     1 |    50 |       |    22 |
|   4 |    VIEW                               |                              |     1 |    13 |       |     3 |
|   5 |     SORT GROUP BY                     |                              |     1 |    13 |       |       |
|   6 |      VIEW                             |                              | 3053 | 39689 |       |     3 |
|   7 |       TABLE ACCESS FULL               | SYS_TEMP_0FD9D68B3_C112F95D | 3053 |   110K|       |     3 |
|   8 |    VIEW                               |                              |     1 |    37 |       |    19 |
|   9 |     SORT GROUP BY                     |                              |     1 |    37 |       |    19 |
| 10 |      VIEW                             |                              | 3053 |   110K|       |     3 |
| 11 |       TABLE ACCESS FULL               | SYS_TEMP_0FD9D68B3_C112F95D | 3053 |   110K|       |     3 |
Predicate Information (identified by operation id):
   4 - access("EES_ENERGY_MASTER"."PROV_ID"="EES_CONS_PROV"."PROV_ID")
   5 - filter("EES_CONS_PROV"."CONS_06_09_YN"='N' OR "EES_CONS_PROV"."CONS_06_09_YN"='Y')
   6 - filter("EES_ENERGY_MASTER"."DISC_MON">=2006101 AND SUBSTR("EES_ENERGY_MASTER"."ICD_CODE",1,2)='68-gyn'
              AND "EES_ENERGY_MASTER"."MANUFACTURER"='EES')
   7 - access("EES_ENERGY_MASTER"."PDCT_CAT"='Energy')
   9 - filter("EES_HOSP_CHG_PROV"."PDCT_CAT"='Energy' AND "EES_HOSP_CHG_PROV"."MANUFACTURER"='EES')
12 - filter("MVW_EES_ICD_STATS"."ICD_GROUP"='68-gyn')
13 - access("MVW_EES_ICD_STATS"."DISC_QTR">=20061 AND "MVW_EES_ICD_STATS"."DISC_QTR" IS NOT NULL)
14 - filter("EES_CONS_PROV"."CONS_06_09_YN"='N' OR "EES_CONS_PROV"."CONS_06_09_YN"='Y')
15 - access("MVW_EES_ICD_STATS"."PROV_ID"="EES_CONS_PROV"."PROV_ID")
16 - access("MVW_EES_ICD_STATS"."PROV_ID"="EES_HOSP_CHG_PROV"."PROV_ID")
Please help with some solution.

OK: the third parameter of the SUBSTR function indicates the (maximum) length of the returnd string.
Therefore SUBSTR("EES_ENERGY_MASTER"."ICD_CODE",1,2) could possibly be '68' , but never '68-gyn'.
'68-gyn' is just 4 characters too long.
Urs

Need help with writing a query with dynamic FROM clause

Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'Simply sticking the later query in the first query does not work.
Any pointers will be appreciated.
Thanks
rogers42

Hi,
rogers42 wrote:
Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'
Remember that anything inside quotes is case-sensitive. Is the owner really "Schema_Name" with a capital S and a capital N, and 8 lower-case letters?
Simply sticking the later query in the first query does not work.Right; the table name must be given when you compile the query. It's not an expression that you can generate in the query itself.
Any pointers will be appreciated.In SQL*Plus, you can do something like the query bleow.
Say you want to count the rows in scott.emp, but you're not certain that the name is emp; it could be emp_2011 or emp_august, or anything else that starts with e. (And the name could change every day, so you can't just look it up now and hard-code it in a query that you want to run in the future.)
Typically, how dynamic SQL works is that some code (such as a preliminary query) gets some of the information you need to write the query first, and you use that information in a SQL statement that is compiled and run after that. For example:
-- Preliminary Query:
COLUMN     my_table_name_col     NEW_VALUE my_table_name
SELECT     table_name     AS my_table_name_col
FROM     all_tables
WHERE     owner          = 'SCOTT'
AND     table_name     LIKE 'E%';
-- Main Query:
SELECT     COUNT (*)     AS cnt
FROM     scott.&my_table_name
;This assumes that the preliminary query will find exactly one row; that is, it assumes that SCOTT has exactly one table whose name starts with E. Could you have 0 tables in the schema, or more than 1? If so, what results would you want? Give a concrete example, preferably suing commonly available tables (like those in the SCOTT schema) so that the poepl who want to help you can re-create the problem and test their ideas.
Edited by: Frank Kulash on Aug 11, 2011 2:30 PM

Need a help with something basic, renaming pages made in muse

Hi All
can someone help me with a basic task,
I need to rename a page ivve made in muse containing slide shows or forms,
when I upload via FTP it over writes the websites index.html page
any suggestions on what i do to rename Ive tried everything
Thank you, In anticipation
Julie

Hi Julie,
To rename a page name in Muse, please right click on page and go to page properties. You can rename the page name of all the pages as well as the "file name" in Muse but you can't change the 'File name" of the index page in Muse. Please refer to the following screenshot :
If you choose to export the site as HTML, you can then change this as well but then the menu items links will be broken and you will have to manually link all the menu items outside muse.
Hope this helps.
Cheers!
Aish

Help with a update query from a subquery

Hello All,
I wanted to see if someone can help me with an update query.
I need to grab a latitude & longitude from a the same user that is in two accounts. therefore i am trying to update lat/long in a users table for one account based off of the same user in another account. I am matching the users up by phone number and last name. I tried a subquery but am having difficulty.
I was thinking of something like the following:
update users
set lat = getlat, long = getlong
inner join (select lat as getlat, long as get long from users where account_id = '1')
on phone = phone and last name = lastname
where account_id = '2' and lat IS NULL and long IS NULL
Am I going in the right direction???
Thanks in advance for any assistance!!!!

What difficulty are you having? Have you tried what you posted and get an error?
Although someone may be able to give you sql advice here, I would try posting this over at Stack Overflow as its not really related to Coldfusion.

Help With Geodetic Rectangular Query Please

I'm new to spatial so I appreciate your help.
I have a 3D geodetic coordinate system defined that is index in 2D (lon & lat).
I want to do a query that returns all points (lat, lon, alt) within the rectangle described by the query.
I read in the "Oracle Spatial User's Guide" that this rectangle must have 5 points (since I'm using geodetic).
I have not found a good example of how to format the query. Can you help with an example?

here is an example which assume a wgs-84 coordinate system (srid=8307). Note that altitude will be ignored.
select col1,col2,etc
from geom_table
where sdo_relate(geom,mdsys.sdo_geometry(2003,8307,NULL,
mdsys.sdo_elem_info_array(1,1003,1),
mdsys.sdo_ordinate_array(-70.05,40.8, -69.05,40.8, -69.05,41.2, -70.05,41.2, -70.05,40.8)),
'mask=anyinteract querytype=window') = 'TRUE';

Need help with the following query

I have the following data
INVOICE_ID PAID_AMT PYMNT_GROSS_AMT DISCOUNT
10151 1375 1375 55
10151DC -44.81 -44.81 0
20017 25 25 7
Ok the data I want to grab the discount field is paid_amt = pymnt_gross_amt and discount <> 0. If however there is another invoice_id out there (same invoice ID except with a DC appended to it like 10151DC) then you want to select the differece between the discount field without the DC and the Invoice ID with the DC the paid_amt field.
So the results would be.
Invoice_ID Discount
10151 10.19
20017 7
Thanks for all your help!

Why scan same table twice when it can be achived using single scan :
Hope this helps :
with inv_data as
(select '10151' invoice_id,
1375 paid_amt,
          1375 pymnt_gross_amt,
          55 discount from dual
union all
select '10151DC' invoice_id,
-44.81 paid_amt,
          -44.81 pymnt_gross_amt,
          0 discount from dual
union all
select '20017' invoice_id,
25 paid_amt,
          25 pymnt_gross_amt,
          7 discount from dual)
select replace(invoice_id,'DC') invoice_id,
sum(case when invoice_id like '%DC' then pymnt_gross_amt
     else discount end) discount
from inv_data
group by replace(invoice_id,'DC')
INVOICE DISCOUNT
10151 10.19
20017 7
2 rows selected.

Need help with Visual BASIC

I am in an intro to programming course, and I am writing a console on Visual Basic 2013. My problem with Visual Basic right now is that I cannot get the formula to work. All of my inputted values end up being 0's. Am I using incorrect parameters,
am I misunderstanding how to use arguments; am I not coding correctly? The scenario for my problem is:
Areas of Rectangles: The area of a rectangle is the rectangle’s length times its width. Design a program that asks for the length and width of two rectangles. The program should tell the user which rectangle has the
greater area, or if the areas are the same.
//My code is
Module Module1
Sub Main()
Dim LENGTH As Double = 0
Dim WIDTH As double = 0
Dim AREA_1 As Double
Dim AREA_2 As Double
Dim RECTANGLE As String = " "
area1(LENGTH, WIDTH)
areaCalc1(AREA_1, LENGTH, WIDTH)
area2(LENGTH, WIDTH)
areaCalc2(AREA_2, LENGTH, WIDTH)
decision(AREA_1, AREA_2, RECTANGLE)
displayDec(RECTANGLE)
Console.WriteLine("Press any key to exit...")
Console.Read()
End Sub
Sub area1(ByVal LENGTH, WIDTH)
Console.WriteLine("Please input the following for your first rectangle:")
Console.Write("Length: ")
LENGTH = Console.ReadLine()
Console.Write("Width: ")
WIDTH = Console.ReadLine()
End Sub
Sub areaCalc1(ByVal AREA_1, ByRef LENGTH, WIDTH)
AREA_1 = LENGTH * WIDTH
Console.WriteLine("This is the area for rectangle 1: " & AREA_1)
End Sub
Sub area2(ByVal LENGTH, WIDTH)
Console.WriteLine("Please input the following for your second rectangle: ")
Console.Write("Length: ")
LENGTH = Console.ReadLine()
Console.Write("Width: ")
WIDTH = Console.ReadLine()
End Sub
Sub areaCalc2(ByVal AREA_2, ByRef LENGTH, WIDTH)
AREA_2 = LENGTH * WIDTH
Console.WriteLine("This is the area for rectangle 2: " & AREA_2)
End Sub
Sub decision(ByRef AREA_1, AREA_2, ByVal RECTANGLE)
If AREA_1 < AREA_2 Then
RECTANGLE = "rectangle 2"
Else
RECTANGLE = "rectangle 1"
End If
End Sub
Sub displayDec(ByRef RECTANGLE)
Console.WriteLine("The rectangle with the greater Area is " & RECTANGLE)
End Sub
End Module

Hi,
If you are just beginning to program i highly recommend setting the following options in the Visual Studio menu (Tools/Options). Open the Options window and go to the (Projects and Solutions) and click on (VB Defaults). Now set the options as follows.
Option Strict - On
Option Explicit - On
Option Infer - Off
And probably one of the most important things to do is learning to Debug your code. That will save you hours of headaches when you get unexpected results in your applications. You will know how to track it down and find where in the code your results
are being thrown off. There are quite a few Debugging tutorials on the internet. Here are a few decent ones.
Debugging Express
Breakpoints and Debugging Tools
If you say it can`t be done then i`ll try it

Help with a basic query

Similar Messages

Maybe you are looking for