Help...with a friend...need assistance

Hey everyone. A new mac user friend has accidentally dropped 1900 photos from a usb key drive into the desktop and I have the beachball of death on the screen with these icons/photos loading. I want to stop the process and cannot find a way to start activity monitor...any help appreciated...

Click here and follow the instructions.
(27494)

Similar Messages

Help with syncing friends... LG vortex

My LG Vortex was synced to Facebook but never updated my contacts, so I unsynced it and tried to do it again. It brought up the option to import friends, and I selected Smart Select. Now my phone is stuck with the notification "getting friends..." and I've waited about 10 minutes. If I exit this screen, I cannot return to importing friends. How do I sync friends to contacts??

Choffm18, I love having my Facebook contacts synced to my phone and would love to make sure yours is working as well. If you're still having problems loading the application, clear cache from Facebook by going to Settings, Applications, Manage Applications, All, Facebook for LG, Clear data/cache. You'll need to setup the application again.
Let me know if you still need assistance syncing the contacts.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Help with Instrument I/O Assistant

I am trying to control an Instrument with 'Instrument I/O Assistant. The control commands that the instrument expects are a ASCII character immediatly followed by a 'nul' character.
If the instrument does not see the null character then it will not run the command. Is there a way of entering a 'null' character as ACSII?
Also with 'Instrument I/O Assistant, What is the termination character \n? What do the termination characters do?

Unless there have been changes to the assistant in LabVIEW 8.x, you can't use it to send a NULL character. The termination character input is where you tell the assistant to append a specific control character at the end of each command and what character will terminate a read. The only options are \r (Carriage Return), \n (Line Feed), or \t (Tab). You need \00 which is the same as hex 00 and is the ASCII NULL character. You can create an assistant task and then convert to a regular subVI or just use the lower level VISA Write in the first place. There is a couple of shipping examples for serial communication. One has the front panel string control set for '\' Codes Display which does allow you to enter \00. The other sets the termination character with a VISA property node.

Help with display settings needed urgently

Graphics and icons that are supposed to be round appear oval. For instance the Safari and App icons on the dock appear very oval. Logos on websites I've visited before and I know are round appear oval.
I've tried all display settings and nothing helps. I'm a designer and this is causing a major hinderance. Everything appears condenced / squashed sideways. I'd be very grateful if someone could help with this.
I've just purchased the laptop. I have been using Mac for a few years and I've always selected the "stretched" option from the Display settings which sorted out the problem completely. A circle looked a proper circle. But in this version the option is not available.
Badly hoping someone can help with this.
Thanks.
Version Details - OS X Lion 10.7.4

It sounds like you have selected an incorrect resolution. For starters, are you talking about your Air's display or an external display? You haven't said which Air you have. If you have an 11" model, make sure your display resolution is set to 1366x768. If you have a 13" model, it should be set to 1440x900. These are the proper resolutions for the built in displays. Chosing anything other than the referenced "native" display resolutions will result in distortions or clarity problems.

Need help with printer friendly

I would like to create a new template for printer friendly mode. I would like the text to appear just as large and in the same locations in printer friendly mode just as it appears on the form before clicking the print button .Could someone please lead me in the right direction on what to do. Please take into account I am not a HTML guru.
Thanks

Hello
I would like to know how to have a printer friendly page print according to my printer preferences. Currently when I print I am left with what appears to be pieces of graphics around a report as well as not printing in duplex mode as the printer preferences define.
I too am not an HTML programmer, are there additional setups to check aside from the "Printer Friendly" checkbox?
Thanks for any help

I need some help with my video - need to blur some footage.

Hi!
I was wondering if somebody could help me out with my video. I've got some video footage downloaded from the internet (with permission, of course) and I was wondering if there is any way I could blur the clip and then have it slowly fade into focus. I know how to blur the video (the Gaussian blur effect), but I basically want it to look like I've filmed the footage myself and I'm slowly turning the focus wheel until the image is in focus.
Obviously it's quite easy to do in-camera but for my film I needed footage of animals and wasn't able to film any of my own so I needed to source footage online. It's really imperative to my production that I get this blur thing working so if anyone can please explain to me the easiest way to do it then I would be extremely thankful! (That's if it is possible at all... I sure hope so)
I've searched online but so far I've only been able to find videos explaining how to blur a small section of the image (e.g. blurring out logos, faces, etc)
Thanks a lot

For what you want to do, the 'Camera Blur' effect (Windows only)
will work much better than Gaussian Blur.
Add the effect to the clip (or to an Adjustment Layer above to the clip),
then use keyframes to change the amount of blur over a specified
period of time.
Camera Blur effect (Windows only)
http://help.adobe.com/en_US/premierepro/cs/using/WS1E7C690B-2342-43c3-9253-2BAAFF4168EF.ht ml#WS1c9bc5c2e465a58a91cf0b1038518aef7-7deaa
Adjustment Layers - Pr
http://helpx.adobe.com/premiere-pro/using/help-tutorials-adjustment-layers.html#id_1358
Adding, navigating, and setting keyframes - Pr
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7e63a .html
WS3878526689cb91655866c1103906c6dea-7df0a.html

Help with a prog needed - program thats outputs a triangle

Hello!!!!!
How are we all this fine evening?
Hopefully someone out there can help me. I have been working on this for ages but keep getting stuck. I am trying to make a program that prints out a triangle such as:
The first task was to creat a program that prints a box like this:
The code for which I have sussed to be:
import java.util.*;
public class sess11
     public static void main(String[] args)
          // setup data input and declare variables
          Scanner dataInput = new Scanner(System.in);
          int size, x, y;
          System.out.print("Enter the size of the square: ");
          size = dataInput.nextInt();
          while ((size < 2) || (size > 10))
               System.out.printf("The size must be 2 or greater and less than or equal to 10!%n");
               System.out.print("Enter the size of the square: ");
               size = dataInput.nextInt();
          for (y=0; y<size; y++)
               for (x=0; x<size; x++)
                    System.out.print("*");
               System.out.printf("%n");
}the next task was to make it do this:
which modifying the above with this does:
if ( y>0 && y<(size-1) && x>0 && x<(size-1) )
                         System.out.printf(" ");
                    else
                         System.out.print("*");However, no matter what I try to do to change the code
to output the
I cant seem to get it to work, I can get every other combination but the one i need.
I would be greatful of any helo at all.
Cheers

woo! the lightbulb has lit!
import java.util.*;
public class lecture11b
     public static void main(String[] args)
          // setup data input and declare variables
          Scanner dataInput = new Scanner(System.in);
          int size, x, y;
          System.out.print("Please enter the size of the square: ");
          size = dataInput.nextInt();
          while ((size < 2) || (size > 10))
               System.out.printf("The size must be 2 or greater and less than or equal to 10!%n");
               System.out.print("Please enter the size of the square: ");
               size = dataInput.nextInt();
          for (y=0; y<size; y++)
               for (x=-1; x<y; x++)
                         System.out.print("*");
               System.out.printf("%n");
}done it! thanks for the nudge. I think the problem was i have been trying to do this for hours now so all logical thought has gone.
thankyou thankyou thankyou, if you were here id kiss you! :)

Help with (Error-1) needed please

OK Here goes...... I setup a new iMac for my wife, (In the process I Had to replace the hard disk in her old iMac) Which I took for myself. Now I basically used carbon copy cloner to create the new machine Therefore they probably have the same machine name or something. I set up my account, and installed My software, etc...
Heres the problem: Her machine can backup to the 1 TB Time Capsule no problem, but when I try I get This message:
The Backup disk image "/Volumes/Time Capsule/._Lisa ****'s Computer_001b63976362.sparsebundle" could not be accessed (error -1_).
Is there a way to change this machines Name or ID somewhere in the preferences or at the terminal?
Please help. Thanks

I'm not exactly clear on what you did.
Her iMac has a new internal HD, with a "clone" of your Mac, and can back up ok, right?
Your Mac (also an iMac?) can no longer back up? Did you install her old internal HD in your Mac?
Time Machine keeps track of which computer is which by a hardware identifier, not the Computer Name. But for your own purposes, you might want to change one or both Computer Names, via +System Preferences > Sharing.+ See #P1 in [Using Time Machine with a Time Capsule|http://web.me.com/pondini/TimeMachine/TimeCapsule.html] (or use the link in *User Tips* at the top of this forum), for details and limitations on the format of the names. (Sometimes Time Machine will change the name of the sparse bundle on the first backup after you do that, sometimes it won't.)
Time Machine puts each Mac's backups in a separate sparse bundle, so there should be two on your Time Capsule. The one made under Leopard will include the hardware address in the name; the one made under Snow Leopard won't.
If you double-click the Time Capsule in a Finder window's sidebar, then click the Data folder, you should see something like this (in +Column View):+
|
You may need to just select the proper sparse bundle via +Time Machine Preferences.+
If that doesn't help, try repairing your sparse bundle, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If that doesn't work, please correct anything I misunderstood, or if you see something different than the sample.

Help with "You may need to enter the name and password for an administrator

I'm trying to move files from one of my external harddrives to another external harddrive. I keep getting this message "You may need to enter the name and password for an administrator on this computer to change the item named "Documents". I also get this for other folders I want to move, but not all folders on that drive.
I am the administrator, and it only gives me an "ok" button, no option to enter my name and password again.
Any ideas?

I have the same problem, trying to copy items from external hard disk to another computer on the network. I can copy without problems from external hard disk to my laptop. But not from external hard disk to another computer on the network, and neither from my laptop to another computer on the network, but ONLY if the files I try to copy from my laptop were first copied from that external hard drive. It keeps popping me up with this message. Please help, or fix.

Need help with Macbook Resources needed

Hi,
I would like to buy a new laptop (probably a Macbook) and I would like to know if
1 Go is enough to make personnal video (via video capture with my digital 8 video camera)
Thank you very much for your help.

.. So I'm not going to yell after my "futur" macbook because it's too slow (video and/or CPU) because I just have 1 Go for the RAM....
define 'slow' ...
I know, in the 'PC' world, speed is a huge issue.. I'm using Macs since '86, and used Windows at work... speed was never an issue for me... probably, I'm a slow man ... responsiveness, 'snappy' - yes, THIS is important, that's why I'm allways recommending to use at last 1GB of RAM.. the 'min. recommendations' of Apple for OsX are, imho, too low...
OsX/iM makes widely use of the 'speed' of the built in graphic-cards.. e.g. older Macs don't support that 'Quartz' thing... just read the specs of the apps... compare to the hardware you like to buy...
but, as said: iM is a consumer product; it fullfills consumer needs; if you want HiDef imports rendered faster than realtime, and encoding of a 2h videoDVD in less than 65min.. a MacBook is too 'slow'... if you want to edit family video, burn some nice 24min onto a DVD with good looking menus, and you're finishline is next Xmas... get any Mac ...
... the hardware needs of forthcoming (next week) 10.5. nobody can tell you, speculations are not allowed on this board...

Urgent Help With Connections File Needed Please

Hello All!
I am getting the following error when I attempt to test my
live site. I am testing database connectivity within my site that
is hosted by GoDaddy. All pages are ASP and the database is stored
in the root directory in GoDaddy's folder called "access_db". The
folder has read/write access.
Here is the error:
Microsoft JET Database Engine error '80040e4d'
Cannot start your application. The workgroup information file
is missing or opened exclusively by another user.
/sitename/requestquote/index.asp, line 130
Here is the code from the connections file:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
Dim MM_connNAME_STRING
MM_connNAME_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;DataSource=username\access_db\filename.mdb;UserId=usern ame;Password=password;"
%>
The error above refrences "/sitename/requestquote/index.asp,
line 130", and here is the code:
rs_quote.ActiveConnection = MM_connNAME_STRING
Please help.
Thanks - Matt

Sorry Tim? This is Dave. Did you read what said? I'm not
Matt.
Dave
"TC2112" <[email protected]> wrote in message
news:[email protected]...
> It could be, you'd have to check in the control panel to
make sure
> permissions are set to read and write.
> Have you tried changing the path in your connection
string to the GoDaddy
> path and uploading the file?
> The info I posted tells you how to find out what the
path on GoDaddy is.
>
> Tim
>
>
> "Baxter" <baxter(RemoveThe :-)@gtlakes.com> wrote
in message
> news:[email protected]...
> > Tim,
> > Very good reply! I have no experience with GD other
than the complaints
I
> > have read here about connections to databases etc.
I think that if his
> > connection test is ok that it has to be a
permissions issue? What do you
> > think?
> > Dave
> > "TC2112" <[email protected]> wrote in message
> > news:[email protected]...
> >> Hello,
> >>
> >> Sorry if some of this is repetitive in respect
to what others have
> >> advised
> >> in this thread.
> >> It's an answer I gave someone with similar
problems a while ago.
> >> It does answer your question about the
successful path on your local
> > server
> >> being different than the path on GDs server.
> >> There are also instructions on how to find the
path on GD's server if
> > needed
> >> for DNS-Less connection.
> >>
> >>
> >> Option 1:
> >> You can try using a map path function like this
in your connection
> >> string:
> >> access_db is the folder the database is in and
mydatabase.mdb is the
> > access
> >> file.
> >> Substitute your names.
> >>
> >> STRING = "Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" &
> >> Server.MapPath("access_db") &
"\mydatabase.mdb;User Id=admin;Password="
> >>
> >> -or-
> >>
> >> Option 2:
> >> You could try an OLEDB DSN-Less connection
instead of using a DSN. It's
> > not
> >> hard to do.
> >>
> >> Step 1 is to figure out the location of the
root directory on the
host's
> >> server..That's very easy to do yourself.
> >>
> >> Just make an asp page (I named mine
"findit.asp"), and put the
following
> >> code between the <body> tags, like so:
> >> <body>
> >> <%
> >> Response.Write("The location of this page
is:<br>")
> >>
Response.Write(Request.ServerVariables("PATH_TRANSLATED") &
"<br>")
> >> Response.Write("The location of my root
directory is:<br>")
> >> Response.Write(Server.MapPath("\"))
> >> Response.Write Path
> >> %>
> >> </body>
> >>
> >>
> >> Upload it to the same location as your site's
home page.
> >> Once your new asp page is uploaded, just
navigate to that page in your
> >> browser.
> >>
> >> For a site on GD the "findit.asp" page displays
something like this:
> >>
> >> The location of this page is:
> >> d:\hosting\mysite\findit.asp
> >> The location of my root directory is:
> >> d:\hosting\mysite
> >>
> >> Now that you know the root directory location
on their server, you can
> >> figure out the path to your database.
> >> Let's say that the folder your database is in
is named _private, and
it
> >> happens to be in the root
> >> directory along with your home page.
> >>
> >> Next, just add the database folder name
(_private) and the database
> >> inside's name (mydatabase.mdb) to the root
directory location:
> >>
> >> d:hosting\mysite\_private\mydatabase.mdb
> >>
> >> That's your Data Source path.
> >>
> >> The connection string would look something like
this:
> >>
> >> = "Provider=Microsoft.Jet.OLEDB.4.0;Data
> >>
Source=d:hosting\mysite\_private\mydatabase.mdb;User
ID=;Password=;"
> >>
> >> (the code above may appear wrapped (two lines)
in the forum/ng but it's
> > one
> >> line with no return within)
> >>
> >> IMPORTANT: If you are using a local testing
server, make a copy of your
> >> connection asp page as a backup.
> >> The reason? The connection information you are
going to put in this
file
> >> will only work on the host's server.
> >> Once you upload the new connection.asp page
with the changes for the
> >> host,
> >> you'll need to change your local copy back to
your local connection so
it
> >> will work on
> >> your local testing server.
> >>
> >> Upload to server.
> >>
> >> Please note: From now on, when you upload (or
"put" if you're using DW)
> >> files that refer to your connection asp page
you're going to get a
> >> warning
> >> that your connection asp on the host is
different than your local copy.
> >> Always say "No" to updating it, or you'll
replace the GD DSN-Less
> > connection
> >> with your local one.
> >>
> >>
> >> Did you set the appropriate read/write
permissions on the
> > directory(folder)
> >> your database is in?
> >> You can do that in GD's control panel.
Hosting> Select your site >
Manage
> > to
> >> open it.
> >>
> >> I hope this helps.
> >>
> >> For what it's worth, I only use GD for domain
names now.
> >> I had numerous problems with some sites hosted
there, switched them to
> >> HostMySite and haven't had any.
> >>
> >> Take care,
> >> Tim
> >>
> >>
> >>
> >>
> >>
> >> "Baxter" <baxter(RemoveThe
:-)@gtlakes.com> wrote in message
> >> news:[email protected]...
> >> > Baxter - I get "Connection was Made
Successfully" if connection to
the
> >> > database was made Successfully not sure
what's going on here? When
you
> >> > look
> >> > at your site files in Dreamwerer on the
server is there a folder
named
> >> > access_db? If so is your data base in that
folder? The database needs
> >> > permissions set to read and write to that
file. Have you checked
> >> > permissions
> >> > on the site? does GD give you a control
panel so that you can set the
> >> > permissions your self? I have never used
GD but have seen where
people
> >> > have
> >> > had lots of problems with them when using
a scripting language. I
don't
> >> > know
> >> > what else it could be at this point.
> >> > Dave
> >> > "mtrueblood"
<[email protected]> wrote in message
> >> > news:[email protected]...
> >> >> Baxter - I get "Connection was Made
Successfully" with the
credentials
> >> >> you
> >> > gave
> >> >> me. My site works just fine on my
local machine with
> > access_trueblood.dsn
> >> > (it
> >> >> also worked with the dsn I initally
created for the site). All pages
> >> > display
> >> >> and I get no errors. I think where the
issue may be, now I am
guessing
> >> > here, is
> >> >> that my connection refrences a
database located in the folder
> >> >>
C:\Users\Administrator\Websites\Sitename\access_db, but once I
upload
> > my
> >> > site,
> >> >> the database still sits in access_db,
but the root folder possibly
has
> >> > changed
> >> >> (maybe causing the connection to
fail).
> >> >>
> >> >> Dooza - I don't understand how I can
use "c:myDsnFile.dsn", when
once
> > I
> >> > upload
> >> >> my site, "c:myDsnFile.dsn" would then
not be the location of my dsn.
> >> >> "c:myDsnFile.dsn" refrences a file on
my computer. I am using an
> >> >> online
> >> > hosting
> >> >> company. Am I not understanding you
correctly? See note above. I did
> > use
> >> > your
> >> >> information and got the following
browser error:
> >> >>
> >> >> Microsoft OLE DB Provider for ODBC
Drivers error '80004005'
> >> >> General error: Invalid file dsn ''
> >> >> /sitename/contactus/index.asp, line
130
> >> >>
> >> >> line 130 -
rs_contactus.ActiveConnection = MM_connTrueblood_STRING
> >> >>
> >> >> I am researching on how to do a
dsn-less connection, unless I can
get
> >> > this
> >> >> figured out.
> >> >>
> >> >> Thanks - Matt
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

Help with regular expression needed

Hi,
Perhaps someone here can help me with my regular expression I'm trying to build in my Java code.
The regular expression that I'm looking to build consists of any non-whitespace character up until it finds one or two <>= symbols and then any character thereafter. So both these Strings would match the expression:
City 1==London
Age>=18
The regular expression that I'm using is as follows:
(\\S+)([><=]){1,2}(.+)However, group 1 always retrieves the first <>= symbol as in "City 1=". How can I make the <>= part greedy so that it retrieves both operator symbols?
Thanks.

Make the first group, the non-spaces, reluctant:
"(\\S+?)([<>=]{1,2})(.+)"

Help with Delta Values needed

Below is an example of the output from a “show access-list” command on the Cisco PIX/ASA.
NDC-FW-01# show access-list
access-list allow-in line 1 extended permit tcp any host <IP_1> eq www (hitcnt=186) 0x67305930
access-list allow-in line 2 extended permit tcp any host <IP_1> eq https (hitcnt=0) 0x4612a177
access-list allow-in line 11 extended permit tcp any host <IP_2> eq www (hitcnt=480) 0xce0a6156
access-list allow-in line 12 extended permit tcp any host <IP_2> eq https (hitcnt=64) 0xf530e0aa
access-list allow-in line 20 extended permit tcp any host <IP_3> eq www (hitcnt=7671) 0xea971ac0
access-list allow-in line 21 extended permit tcp any host <IP_3> eq https (hitcnt=41920) 0x8d30dc38
access-list allow-in line 22 extended permit tcp any host <IP_4> eq https (hitcnt=34) 0xbf7c0975
What I want to be able to do is monitor the delta value of the hit count between polling intervals. I want to do this, ideally, for only some access-list, and for only some of the access-list entries within those access-lists.
Is this something I can do directly or do I need to use a third party piece of software to do this and if so, can anyone suggest which software to use ?
Thanks very much
DavidT

That's nothing the ASA can do native. But if you have a linux-Box, it shouldn't be to hard to script with some lines of AWK: http://www.gnu.org/software/gawk/manual/gawk.html
BTW: You should move this Thread to "Firewalling" as it has nothing to do with IPS ...
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Should I delete all my .MTS files? Help with workflow desperately needed

I use a Sony NEX 6 to film a lot of personal projects. My workflow has so far been
Film Import to lightroom Export as H.264 to hardrive Import to iMovie
But now I am going to start using final cut pro x. Apparently Final Cut X is unable to import .MTS files so again, workflow at the moment is
Film Import to lightroom Export as H.264 Import to Final Cut Pro X and convert to ProRes
My hardrive has quickly filled up and I've realised that I stupidly have my footage saved in 3 different locations. Lightrooms catalogue (.MTS), the file on my hardrive that I export the footage from lightroom to (export as H.264 but file type says it's mp4?) and Final Cut Pro's catalogue (ProRes).
I want a system where my footage is saved in one place on my laptops hardrive, then I will back my computer up with an external hardrive.
How does this workflow sound?
Film Import to lightroom Export as H.264 Import to Final Cut Pro X Delete footage from lightroom Delete exported file on computer Backup laptop on external hardrive
Can anyone suggest a better workflow?
Will I come across any problems in the future by deleting everything except the ProRes files?
Is lightroom a good enough program to be exporting my footage from or should I use a dedicated converter?

Thank you for your help, yes I will be backing up elsewhere. I'm a massive noob at all this and after an afternoon of searching I think I've got my head around it. Best option for future footage
Import AVCHD directly from camera into Final Cut Pro. Convert it to ProRes if I have the space or if I'm not happy with the speed of working with native footage.
For all the footage that I have in lightroom but no longer have on a memory card my plan is to
Rewrap the files (I'm using a trial of clipwrap which changes the .MTS to .MOV).
Import the .Mov files into FCP, transfer file into FCP catalogue
Delete the movies from lightroom and the lightroom catalogue

Help with downloading "Adobe Download Assistant"

Heyy,
I was downloading the free trial of Adobe Photosho CS6 and I clicked "Download Now" to get Adobe Download Assistant.
Abdobe Download Assistant shows up in my downloads folder but I can't open it, no matter how many times I click on it.
On the website, it says it would open immediately but it didn't.
My laptop is Windows Vista.
Is there another way to open this file?
Any help is appreciated,
Thank you.

hey tsoichitsoichi
You might have some UAC(User Account Control) , please check the setting fo it.
Follow the link below to get more info on UAC,
http://windows.microsoft.com/en-in/windows-vista/turn-user-account-control-on-or-off
OR
Please visit this website for direct download link.
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Please follow the correct steps to download the software.

Help with my friends att centro it keeps on crashing and reseting nonstop !!!

Help help well ok heres the story I put a mini sd card that had an app called ljp and I put it in my friends centro. Then I started to reset then reset and keeps going on and now im scared he might charge me what do I do to fix it.
Post relates to: Centro (Sprint)

hello
some application may create this problem..
but its no big deal.. ( if he has no data on the phone)
you can do warm reset or hard reset on the phone
check the link http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=87,E=0000000000054489278,K=1176,Sxi=19,Case=obj(887)
hope it will help you
Post relates to: Palm TX

Help...with a friend...need assistance

Similar Messages

Maybe you are looking for