Help with a Multimedia Presentation

Hi.
In a couple of months I will be making a presentation in a large hall. My intent is to develop a number of Flash videos that I will store on my Mac. I will utilize a projector to show the videos on a screen at specific times depending on the flow of the presentation. I know how to develop the videos, but I am stuck as to how I can show the videos via the Mac.
What application should I use?
Does anyone have any ideas?
Thanks in advance for any ideas.
Brian

I talked to many people about this and (Surprise) found that Apple Keynote would work the best. I purchased the software and am learning how to use it. It seems pretty easy to use so far, but has many powerful tools.
Brian

Similar Messages

Need help with publishing multimedia ebook.

I'm about to publish a multimedia ebook that I would like to be available on laptops as well as multiple devices, iPads, tablets, etc. I like the interactivity of the iAuthor platform but then only those with iPads can read it? I need it to be available to a wider audience and available in different online stores. Should I publish in InDesign or iAuthor. Do I publish as a ebook or as an App. Anyone here involved in multimedia publishing. Very confusing.

If you try to 'publish' as an app, and you use the words ebook or just book, the review teams are likely to reject and tell you to do a book instead, so be prepared to not call it any type of book and to deliver something that showcases the device and iOS as best as you can if you take that route...it's non-trivial, mostly, so be prepared to learn any skills you may not have yet need going in.
Look at the book 'Yellow Submarine' for what I consider a good example of a standard epub w/m'media. it can be done, but as noted, iBA is iPad only, so....good luck.

I Need help with IK Multimedia T-Racks 3

I have some questions about T-Racks that you guys might know about. I recently updated my Mac Pro and when I did this, I had to re-authorize T-Racks. After I authorized again, I went to play my tracks and the music was starting a half measure after I pressed play and when I pressed the pause button, the song stopped a half measure later.
I have found out that the problem is T-Racks because Logic is fine now but I am in dire need of T-Racks Deluxe 3 for my tracks. Any help would be AMAZING!
Thank You!

The battery has an expected life of nearly 1000 cycles so 13 isn't much.
About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University
Apple - Batteries - iPod
Apple - Batteries - iPhone
Apple - Batteries - iPad
Apple Portables- Calibrating your computer's battery for best performance
Mac notebooks- Determining battery cycle count
How to Calibrate Your Mac, iPhone, or iPad Battery | MacBlend

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.

powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.

Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario

Is Adobe Flex suitable to build a Multimedia Presentation?

I am looking for some advice on the suitability of using
Adobe Flex for building a Multimedia presentation system. I have
watched numerous videos about Flex and even tried some tutorials
but before I make a decision on Technologies for a project I am
working on, I wanted to consult the Flex community for some advice.
I have to take Multimedia Presentation made using PowerPoint
and build it into a custom made Multimedia Presentation that has
similar functionality. Would Adobe Flex would be a suitable tool?
The Presentation must be viewable on the Internet and be deployed
to the Desktop so combining Flex with Adobe AIR would be needed to
meet this requirement.
I guess the general requirements are as follows:-
The user must be able to navigate forward and backward
through pages of the presentation.
The Presentation must be able to display Flash video's. When
video is played, the video must open in a new window infront of the
main application. Images and animated GIF'S must have the same
functionality.
Based on these requirements, would Flex be suitable?
Thanks in advance for you help and advice.

I think Flex would be very suitable for building a multimedia
presentation system. Once you create your Flex app and generate the
SWF file, you can post it on the web, or view it on the desltop,
even without AIR. You could use view states to transition between
pages, though you would have other options as well. You could
display Flash videos easily, and I believe you could have the video
open in a new top window. Same with images and gifs. Flex would be
a very good choice I believe.

Lost with 7250i multimedia message backup :(

Hi there,
I've jst signed up as i promised i'd backup my misses phone before she goes travelling.
I went to the nokia 7250i page and downloaded the latest pc suite.
But I cannot find a way to view or backup mms? strange! looked at every option.
Also doesn't appear to be an option to view files and messages while the phone is not connected.
I have done a normal backup but don't know if that includes mms.
Can you help with any of these 3?? She leaves tommorow!

Thanks Sandy,
I have done that. I backed up messages but it doesn't give you a breakdown to say 156 text messages and 10 mms backed up or anything like that.
I wasn't sure that mms had backed up as they don't show in the Nokia PC Suite Messages section where you should be able to create and send text and multimedia messages. Only text messages show up there. No MMS.
Maybe I just have to forward mms to another phone.
Thought this would be easy lol.
I use a third party software years ago which came with usb infra red dongle - and it backed up and made messages, images and sounds etc available to view and upload to other phones with out the original present BUT I can't remember what it's called now. Not as pretty as nokia pc suite but seems to work better.lol
Ideas anyone?
Thanks

Query Help with Item Master & Warehouse Code

Forum,
I would like help with a query to identify any items within a database where a particular warehouse code does NOT exist against it. At present I have the following:
select T0.ItemCode, T1.WhsCode from OITM T0
INNER JOIN OITW T1 on T0.ItemCode = T1.ItemCode
where T0.ItemCode NOT IN ('WHS1')
This is returning all other instance and not just a list of item codes where 'WHS1' is missing from within the 'Stock Data' tab.
Thanks,
Sarah

Hi Sarah...
Try This
SELECT T0.ItemCode, T0.ItemName, T1.WhsCode
FROM OITM T0 INNER JOIN OITW T1 ON T0.ItemCode = T1.ItemCode
WHERE T1.WhsCode not in ( 'WHS1')
Regards
Kennedy

Help with encapsulation and a specific case of design

Hello all. I have been playing with Java (my first real language and first OOP language) for a couple months now. Right now I am trying to write my first real application, but I want to design it right and I am smashing my head against the wall with my data structure, specifically with encapsulation.
I go into detail about my app below, but it gets long so for those who don't want to read that far, let me just put these two questions up front:
1) How do principles of encapsulation change when members are complex objects rather than primitives? If the member objects themselves have only primitive members and show good encapsulation, does it make sense to pass a reference to them? Or does good encapsulation demand that I deep-clone all the way to the bottom of my data structure and pass only cloned objects through my top level accessors? Does the analysis change when the structure gets three or four levels deep? Don't DOM structures built of walkable nodes violate basic principles of encapsulation?
2) "Encapsulation" is sometimes used to mean no public members, othertimes to mean no public members AND no setter methods. The reasons for the first are obvious, but why go to the extreme of the latter? More importantly HOW do you go to the extreme of the latter? Would an "updatePrices" method that updates encapsulated member prices based on calculations, taking a single argument of say the time of year be considered a "setter" method that violates the stricter vision of encapsulation?
Even help with just those two questions would be great. For the masochistic, on to my app... The present code is at
http://www.immortalcoil.org/drake/Code.zip
The most basic form of the application is statistics driven flash card software for Japanese Kanji (Chinese characters). For those who do not know, these are ideographic characters that represent concepts rather than sounds. There are a few thousand. In abstract terms, my data structure needs to represent the following.
- There are a bunch of kanji.
   Each kanji is defined by:
   - a single character (the kanji itself); and
   - multiple readings which fall into two categories of "on" and "kun".
      Each reading is defined by:
      - A string of hiragana or katakana (Japanese phoenetic characters); and
      - Statistics that I keep to represent knowledge of that reading/kanji pair.Ideally the structure should be extensible. Later I might want to add statistics associated with the character itself rather than individual readings, for example. Right now I am thinking of building a data structure like so:
- A Vector that holds:
   - custom KanjiEntry objects that each hold
      - a kanji in a primitive char value; and
      - two (on, kun) arrays or Vectors of custom Reading objects that hold
         - the reading in a String; and
         - statistics of some sort, probably in primitive valuesFirst of all, is this approach sensible in the rough outlines?
Now, I need to be able to do the obvious things... save to and load from file, generate tables and views, and edit values. The quesiton of editting values raises the questions I identified above as (1) and (2). Say I want to pull up a reading, quiz the user on it, and update its statistics based on whether the user got it right or wrong. I could do all this through the KanjiEntry object with a setter method that takes a zillion arguments like:
theKanjiEntry.setStatistic(
"on",   // which set of readings
2,      // which element in that array or Vector
"score", // which statistic
98);      // the valueOr I could pass a clone of the Reading object out, work with that, then tell the KanjiEntry to replace the original with my modified clone.
My instincts balk at the first approach, and a little at the second. Doesn't it make more sense to work with a reference to the Reading object? Or is that bad encapsulation?
A second point. When running flash cards, I do not care about the subtlties of the structure, like whether a reading is an on or a kun (although this is important when browsing a table representing the entire structure). All I really care about is kanij/reading pairings. And I should be able to quickly poll the Reading objects to see which ones need quizzing the most, based on their statistics. I was thinking of making a nice neat Hashtable with the keys being the kanji characters in Strings (not the KanjiEntry objects) and the values being the Reading objects. The result would be two indeces to the Reading objects... the basic structure and my ad hoc hashtable for runninq quizzes. Then I would just make sure that they stay in sync in terms of the higher level structure (like if a whole new KanjiEntry got added). Is this bad form, or even downright dangerous?
Apart from good form, the other consideration bouncing around in my head is that if I get all crazy with deep cloning and filling the bottom level guys with instance methods then this puppy is going to get bloated or lag when there are several thousand kanji in memory at once.
Any help would be appreciated.
Drake

Usually by better design. Move methods that use the
getters inside the class that actually has the data....
As a basic rule of thumb:
The one who has the data is the one using it. If
another class needs that data, wonder what for and
consider moving that operation away from that class.
Or move from pull to push: instead of A getting
something from B, have B give it to A as a method
call argument.Thanks for the response. I think I see what you are saying.. in my case it is something like this.
Solution 1 (disfavored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          char theKanji = currentKanjiEntry.getKanji();
          String theReading = currentKanjiEntry.getReading();
          // build and show a flashcard based on theKanji and theReading
          // use a setter to change currentKanji's data based on whether the user answers correctly;
}Solution 2 (favored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          currentKanji.buildAndShowFlashcard(); // method includes updating stats
}I can definitely see the advantages to this, but two potential reasons to think hard about it occur to me right away. First, if this process is carried out to a sufficient extreme the objects that hold my data end up sucking in all the functionality of my program and my objects stop resembling natural concepts.
In your shopping example, say you want to generate price tags for the items. The price tags can be generated with ONLY the raw price, because we do not want the VAT on them. They are simple GIF graphics that have the price printed on a an irregular polygon. Should all that graphics generating code really go into the item objects, or should we just get the price out of the object with a simple getter method and then make the tags?
My second concern is that the more instance methods I put into my bottom level data objects the bigger they get, and I intend to have thousands of these things in memory. Is there a balance to strike at some point?
It's not really a setter. Outsiders are not setting
the items price - it's rather updating its own price
given an argument. This is exactly how it should be,
see my above point. A breach of encapsulation would
be: another object gets the item price, re-calculates
it using a date it knows, and sets the price again.
You can see yourself that pushing the date into the
item's method is much beter than breaching
encapsulation and getting and setting the price.So the point is not "don't allow access to the members" (which after all you are still doing, albeit less directly) so much as "make sure that any functionality implicated in working with the members is handled within the object," right? Take your shopping example. Say we live in a country where there is no VAT and the app will never be used internationally. Then we would resort to a simple setter/getter scheme, right? Or is the answer that if the object really is pure data are almost so, then it should be turned into a standard java.util collection instead of a custom class?
Thanks for the help.
Drake

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

Need help with home work see what you got

1. The MEMBERS table has the phone number broken into three fields:
   CountryCode - e,g., '1' for the United States
   AreaCode - e.g., three digits for the United States
   Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
   Any or all of the fields may be missing (null) or blank or contain only spaces.
   Write a T-SQL statement to concatenate the three fields into a complete phone number
   with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
   If no Phone is present, return a blank string.
   If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
   For this purpose, each row contains:
   PersonID - unique member identifier
   Campaign - name of war/conflict
   Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
   E.g., PersonID    Campaigns
         12345678    Global War on Terror, Iraq, Afghanistan
3. The MEMBER_STATISTICS table contains one row per post.
   For this purpose, each row contains the post's:
   Division - a way of grouping posts by their member size
   Department - the state in which the post is located
   PostNumber - unique post identifier
   Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
   Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
   Rank them by highest to lowest reinstated count.
   Return their Division, Rank, Department, PostNumber, Reinstated

I got 3 home work questions think i have the first two need help with the last one please.
Kinda stuck on #3 hard I can see data not sure witch to sum or count?
1. The MEMBERS table has the phone number broken into three fields:
CountryCode - e,g., '1' for the United States
AreaCode - e.g., three digits for the United States
Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
Any or all of the fields may be missing (null) or blank or contain only spaces.
Write a T-SQL statement to concatenate the three fields into a complete phone number
with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
If no Phone is present, return a blank string.
If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
ANSWER******************
Notes: created a funtion to format the phone
Then used the this function in a select to concatenate Phone
CREATE FUNCTION dbo.FORMATPHONE (@CountryCode int, @AreCode int, @Phone VARCHAR(14))
RETURNS VARCHAR(14)
AS BEGIN
DECLARE @ReturnPhone VARCHAR(14)
DECLARE @NewPhone VARCHAR(14)
-- Note case sets newphone to null if phone null or '' also to see if phone has '-' in it if not inserts into newphone
case
when @Phone is null or @Phone = ''
Then SET @NewPhone = Null
when @Phone = substring(@Phone,4,1)='-'
Then SET @NewPhone = @Phone
else
SET @NewPhone = substring(@Phone,1,3)+'-'+ substring(@Phone,4,4)
End
case
when @NewPhone is null then SET @ReturnPhone = @NewPhone
elese case
when @AreCode is null or @AreCode = '' then SET @ReturnPhone = @NewPhone
else
SET @ReturnPhone = @CountryCode + '(' + @AreCode + ')' + @NewPhone
END
END
RETURN @ReturnPhone
END
select dbo.FORMATPHONE(CountryCode,AreCode,Phone)
from MEMBERS
2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
For this purpose, each row contains:
PersonID - unique member identifier
Campaign - name of war/conflict
Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
E.g., PersonID Campaigns
12345678 Global War on Terror, Iraq, Afghanistan
ANSWER******************
SELECT PersonID,
STUFF(( SELECT ',' + Campaign AS [text()]
FROM PERSON_CAMPAIGN
WHERE (PersonID = Results.ID)
FOR XML PATH('')
), 1, 1, '' )
AS Campaigns
FROM PERSON_CAMPAIGN Results
3. The MEMBER_STATISTICS table contains one row per post.
For this purpose, each row contains the post's:
Division - a way of grouping posts by their member size
Department - the state in which the post is located
PostNumber - unique post identifier
Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
Rank them by highest to lowest reinstated count.
Return their Division, Rank, Department, PostNumber, Reinstated

Need help with almost completed plugin engine project

Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.

Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

Terrible customer service, and no help with defective camera

Madams and Sirs,
This camera (see below) was a Christmas present, and we discovered first last week that it had a manufacturing defect. (one of the small tabs holding the case half together got installed in a pinched way.)
Best Buy has always had fantastic customer service, and we have been very happy. We have spend many thousand dollars in your store every year. So we were sure the store would have a solution.
We took it in to your store #1423 on Curtner in San Jose to try to exchange or replace under warranty.
I understand you sometimes you are not able to help a customer, but this email is first about the shock I got when I spoke with Megan in customer service.
As many customers in Silicon Valley, I am an engineering manager, and we have performed destructive testing on many of our own products. The defect on this camera is obviously a manufacturing defect, and not possible to be caused by poor handling. This is very obvious.
Megan told me with other employees as well as my son listening next to me that I was a liar, and that the damage was caused by abuse, and not a defect. I tried to explain that was not possible, and she interrupted me, and again said that i was not telling the truth, and that the assembly error was caused by us.
I then asked if it was possible to have the matter reviewed by the store manager, and she responded she was the store manager.
I left with the camera, and the matter unresolved, and had to explain to my son that I was not a liar, and that Megan must be wrong and "some people just have a bad day sometimes".
I will not be spoken to with insults like that, and I can no longer go to your store with my kids, and if my employees treated any customer the way Megan did, I would make sure she received training to correct this. If the store manager have this attitude to customers, the entire organisation usually follows, and I will not be a customer in a store like that.
1. Please help resolve this issue.Order number: {removed per forum guidelines}

Hello erikev,
Cameras are nice to have, especially with young children, so I can imagine how frustrating it can be to find yourself with a pinched casing. When something goes wrong, it’s never a fun situation, and while it may not be something we can necessarily help with, great customer service should still be provided. It sounds like this didn’t happen the way we hoped, and I’m sorry this was at your expense.
As this situation is definitely concerning, I looked into your account to see how I might be able to assist. However, I have found your concerns have reached Terrance with our executive support team. He is currently looking into your situation and should contact you once more information is available. From here, Terrance will be your first point of contact.
Hopefully he can find a good resolution for you,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

Tips and help with re-installing Lion over Snow Leopard

I had MAJOR issues with my initial Lion install on my Mid-2009 MBP- so much so, that I had to wipe my hard drive and re-install Snow Leopard and all my applications. My major issues were as follows:
1. All my files were locked out- I could open them in most cases, but I couldn't overwrite them- Lion had aded some funky permissions scheme that I didn't recognize, and my user name wasn't present on any of them. In some cases, I couldn't even open files, even though they were resident on my hard drive (and in my own user folder) before the upgrade to Lion.
2. Apple's own Universal Binary apps wouldn't work after the upgrade. Final Cut Pro 6, in particular, came up with a message that it was a "PowerPC" app and wouldn't run- yet Shake 4.1 would run just fine!
3. Adobe Creative Suite 3- after the upgrade, my Abode Ceative Suite 3 apps worked just fine, for about a day- that is, until I tried to correct the file permissions issue by changing permission on a few of my folders in my User folder (and electing to change permissions in the files contained therein)- at which point my Adobe apps told me that they were damaged and needed to be reinstalled. Yet after uninstaling and reinstalling the entire Creative Suite 3 times, I still would get the same message.
My entire workflow is Adobe CS and FCS2- why chould I have to pay the upgrade costs just to use Lion? FCPX is completely brkoen for my workflow and eqipment, and Adobe can't even guarantee that CS5 works with Lion- so why does Apple insist on Lion when it's hardly even compatible with its own products?
I really want to use Lion, but I am looking for some tips on instalation to kep these problems from happening again. I didn' have ANY of these problems with upgrading OS 10.2 through 10.6. Any help with prepping my system/files for upgrading would be helpful. Thanks!

any new Apple kB articles
http://support.apple.com/kb/index?page=articles
Me, I think clone backups are more useful, and only use T.M. as secondary.
Using Cloning as a Backup Strategy
I'd assume that professional apps may need to be tested still; and of course check to see what you have that depends on PowerPC code and Rosetta first. That has some in a tither.
A clone lets you still be able to boot Snow Leopard. Check out Carbon Copy, SuperDuper.

Help with a Multimedia Presentation

Similar Messages

Maybe you are looking for