Help with ABAP code in CMOD.

dear all,
can you help me solve the below abap coding problem? thanks.
somewhere at the top
DATA: L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA: L_S_VAR_RANGE LIKE E_T_RANGE.
 LOOP AT I_T_VAR_RANGE INTO L_S_VAR_RANGE. <-- error msg stops here.
 FIND l_s_var_range-vnam IN TABLE it_vnam.
 IF sy-subrc = 0.
 l_check = 'X'.
 EXIT.
 ENDIF.
 ENDLOOP.
Error message...
"L_S_VAR_RANGE" cannot be converted to the line type of "I_T_VAR_RANGE".
Thanks all.

Hi Try this,
DATA: L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA: L_S_VAR_RANGE LIKE LINE OF I_T_VAR_RANGE .
LOOP AT I_T_VAR_RANGE INTO L_S_VAR_RANGE. <-- error msg stops here.
 FIND l_s_var_range-vnam IN TABLE it_vnam.
 IF sy-subrc = 0.
 l_check = 'X'.
 EXIT.
 ENDIF.
 ENDLOOP.
Regards,
Ravi

Similar Messages

Help with abap code in Transformation

Hi Experts,
we have a scenario where we load delta data from an DSO into a Cube.
The records in the DSO looks like below.
Location as (L)
WorkOrder as (W)
Startdate(DDMMYYYY)/time (HH:MM:SS) as (S)
Finishdate/time as (F)
L1
W1
21/04/2009/10:00:00
21/04/2009/12:00:00
L1
W2
21/04/2009/14:00:00
21/04/2009/23:00:00
|| L1 ||W3|| 21/04/2009/16:00:00 ||21/04/2009/20:00:00 ||
Total time ( April 2009 ) for above Location L1 should be calculated as a difference between W1 and W2 since W3 is a overlapping record. So the result would be 13 Hrs. Work Orders are summarised, so we dont need work order info in the output.
Can you experts help me with the code to implement??
Thanks,
DV

For each location, for example L1, move the records to an internal table itab.
sort itab by startdate.
read table itab index 1.
You will get the first value.
sort itab by finishdate descending.
read table itab index 1.
you will get the second value.
Calculate the difference and populate it to the internal table.
finally modify the source package.
I have just given the logic. I hope you can build upon this.
I hope it helps.
Thanks.

Can you help with the code to publish Flash to my own domain.

Thank you for your help, I publish the my site to my own domain, I do not use .Mac, I tested your code and ity works well on .Mac, can you help with the code to publish to my own domain.
Thank you again

You appear to have just collected a variety of code snippets and thrown them together, including a section of AS2 code ( gage.onRelease = function() {... )
The suggestion I offered yesterday still stands. You should find a tutorial regarding AS3 and the atan2 function. Beyond that, what you show suggests this is a school assignment. You should seek help from your fellow students and instructor if that is the case.

I need help with this code error "unreachable statement"

the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AM

ladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class

Need help with WMI code that will send output to db

'm new to WMI code writing, so I need some help with writing code that we can store on our server. I want this code to run when a user logs into their computer
and talks to our server. I also want the code to:
* check the users computer and find all installed patches
* the date the patches were installed
* the serial number of the users computer
* the computer name, os version, last boot up time, and mac address
and then have all this output to a database file. At the command prompt I've tried:
wmic qfe get description, hotfixid
This does return the patch information I'm looking for, but how do I combine that line of code with:
wmic os get version, csname, serialnumber, lastbootuptime
and
wmic nicconfig get macaddress
and then get all this to output to a database file?

Thank you for the links. I checked out http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx and
found lots of good information. I also found a good command that will print information to a text file.
Basically what I'm trying to do is retrieve a list of all installed updates (Windows updates and 3rd party updates). I do like that the below code because it gives me the KB numbers for the Windows updates. I need this information so my IT co-workers &
I can keep track of which of our user computers need a patch/update installed and preferably which patch/update. The minimum we want to know is which patches / updates have been installed on which computer. If you wondering why we don't have Windows automatic
updates enable, that's because we are not allowed to.
This is my code so far.
#if you want the computer name, use this command
get-content env:computername
$computer = get-content env:computername
#list of installed patches
Get-Hotfix -ComputerName $computer#create a text file listing this information
Get-Hotfix > 'C:\users\little e\Documents\WMI help\PowerShell\printOutPatchList.txt'
I know you don't want to tell me the code that will print this out to a database (regardless if it's Access or SQL), and that's find. But maybe you can tell me this. Is it possible to have the results of this sent to a database file or do I need to go into
SQL and write code for SQL to go out and grab the data from an Excel file or txt file? If I'm understanding this stuff so far, then I suspect that it can be done both ways, but the code needs to be written correctly for this to happen. If it's true, then which
way is best (code in PowerShell to send information to SQL or SQL go get the information from the text file or Excel file)?

I need help with my code..

hi guys. as the subject says I need help with my code
the Q for my code is :
write a program that reads a positive integer x and calculates and prints a floating point number y if :
y = 1 ? 1/2 + 1/3 - ? + 1/x
and this is my code
 This program that reads a positive integer x and calculates
 and prints a floating point number y if :
 y = 1 - 1/2 + 1/3 - ? + 1/x
 import java.util.Scanner; // program uses class Scanner
 class Sh7q2
 // main method begins execution of Java application
 public static void main( String args[] )
 // create Scanner to obtain input from command window
 Scanner input = new Scanner( System.in );
 int i = 1; // i is to control the loop
 int n = 2; // n is suppose to control the number sign
 int x; // a positive integer entered by the user
 int m;
 System.out.println("Enter a positive integer");
 x = input.nextInt();
 do
 m = (int) Math.pow( -1, n)/i;
 System.out.println(m);
 n++;
 i++;
 while ( m >= 1/x );
 } // end method main
 } // end class Sh7q2 when I compile it there is no error
but in the run it tells me to enter a positive integer
suppose i entered 5
then the result is 1...
can anyone tell me what's wrong with my code

 This program that reads a positive integer x and calculates
 and prints a floating point number y if :
 y = 1 - 1/2 + 1/3 - ? + 1/x
 import java.util.Scanner; // program uses class Scanner
 class Sh7q2
 // main method begins execution of Java application
 public static void main( String args[] )
 // create Scanner to obtain input from command window
 Scanner input = new Scanner( System.in );
 int i = 1; // i is to control the loop
 int n = 1; // n is suppose to control the number sign
 int x; // a positive integer entered by the user
 double m;
 int a = 1;
 double sum = 0;
 System.out.println("Enter a positive integer");
 x = input.nextInt();
 for ( i = 1; a <= x; i++)
 m = Math.pow( -1, n+1)/i;
 sum = sum + m;
 n++;
 a++;
 System.out.print("y = " + sum);
 } // end method main
 } // end class Sh7q2is it right :S

Inner join Vs Outer join with ABAP code...?

Inner join Vs Outer join with ABAP code...?

Inner Join means, it will not select that recor at all, unless there is a matching entry in the second table.
suppose table VBAK INNER join table VBAP on VBAKVBELN = VBAPVBELN.
In this case, if there are no entries in VBAP, the header entry also will not show up.
But in case of OUTER JOIN, even if there is no items, it will show the header entry(VBAK) with blank columns for fields from item table.(VBAP)
here is one sample for inner join.
SELECT   A~EBELN
           A~EKORG
           A~EKGRP
           A~BSART
           A~LPONR
           A~LOEKZ
           A~LIFNR
           A~RESWK
           B~AEDAT
           B~WERKS
           B~MATNR
           B~MENGE
           B~EBELP
           B~ELIKZ
           B~PLIFZ
           B~PSTYP
           B~KNTTP
           B~MATKL
           B~ZZD_PLANT
           FROM EKKO AS A INNER JOIN EKPO AS B
           ON
           AEBELN = BEBELN
           INTO CORRESPONDING FIELDS OF TABLE T_DATA
           FOR ALL ENTRIES IN T_EKET
           WHERE
           A~EBELN EQ T_EKET-EBELN AND
           A~BSART EQ C_UBSTO      AND
           A~EKORG IN S_EKORG      AND
           A~EKGRP IN S_EKGRP      AND
           A~BSTYP EQ C_BSTYP      AND
           A~LOEKZ EQ SPACE        AND " Order not deleted
           A~RESWK IN S_RESWK      AND
           B~EBELN EQ T_EKET-EBELN AND
           B~EBELP EQ T_EKET-EBELP AND
           B~WERKS IN S_WERKS      AND
           B~MATNR IN S_MATNR      AND
           B~MATKL IN S_MATKL      AND
           B~LOEKZ EQ SPACE.           " Line item not deleted

Please help me with ABAP code

Hi Gurus,
Please help me with the code.
Algorithm: This is for master data extraction. I need to append some records to I_T_DATA before the loop on I_T_DATA begins.
ZTAB is a custom defined table with key KEY. STAB is standard table with key KEY.
1. Create an internal table I_T_STAB similar to STAB.
2. Loop at I_T_DATA
 Read record from ZTAB where KEY = I_T_DATA-KEY and { field1 <> I_T_DATA-field1 or field2 <> I_T_DATA-field2 <> field3 <> I_T_DATA-field3}
If success
 Delete record from I_T_DATA.
Else
 Continue loop.
Copy all records of STAB to I_T_STAB.
3. Delete records in I_T_STAB where I_T_STAB-KEY = ZTAB-KEY.
Now
4. Delete all records in I_T_DATA where I_T_DATA-KEY = I_T_STAB-KEY.
Now,
5. Append all the remaining records from step 3 in I_T_STAB to I_T_DATA.
Please help me with the code upto this part.
Now the actual code in exit starts.
Loop at I_T_DATA
Thanks,
Regards,
aarthi
[email protected]

You might get a quick answer if you were to post in the ABAP forum.
Moderator, please move to ABAP forum. Thanks.
Regards,
Rich Heilman

IDOC: How to create child segment with abap code.

Hi,
I'am trying to write an abap code to create segments for an Idoc which structure is the following:
ZLE_00060_DLVY
> E1EDL20
> Z1DEL_CONS
>Z1DEL_MAT_HEADER
> Z1DEL_MAT
> E1EDL20RET2
> E1EDL22
> E1EDL21
> E1EDL23
> E1EDL51
I receive a sintax error: Error in IDoc with status 26 .
Checking the result I note all segment at the same level and an error about the segment E1EDL22
EDI: Syntax error in IDoc (segment cannot be identified)
 Message no. E0078
Diagnosis
 The segment E1EDL22 does not occur at the current level of the basic
 type DELVRY05 (extension ZLE_00060_DLVY).
 This error can have several reasons:
 o The segment E1EDL22 is assigned to a group whose header segment does
 not occur.
 o The segment E1EDL22 does not exist in the syntax description of the
 basic type DELVRY05 (extension ZLE_00060_DLVY).
 o The sequence of segments in the group in which the segment appears
 is incorrect.
 Previous errors ('mandatory' segment or group missing) may be due to
 this error.
Procedure
 Please check the IDoc or the syntax description of the basic type
 DELVRY05 (extension ZLE_00060_DLVY).
After the error I have:
data records
E1EDL20
Z1DEL_CONS
Z1DEL_MAT_HEADER
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
E1EDL20RET2
E1EDL22
E1EDL21
Abap code:
 idoc_data-segnam = 'Z1DEL_CONS'.
 idoc_data-sdata = s_z1del_cons.
 append idoc_data.
 idoc_data-segnam = 'Z1DEL_MAT_HEADER'.
 s_z1del_mat_header-tsegment = 'MATERIAL'.
 idoc_data-sdata = s_z1del_mat_header.
 append idoc_data.
 clear idoc_data-sdata. <<<<<<<<<<< how to indent the structure because this is a child.
 idoc_data-sdata = s_Z1DEL_MAT.
 idoc_data-segnam = 'Z1DEL_MAT'.
 append idoc_data.
 idoc_data-segnam = 'E1EDL20RET2'.
 idoc_data-sdata = s_E1EDL20RET2.
 append idoc_data.
 clear idoc_data.
 idoc_data-segnam = 'E1EDL22'.
 idoc_data-sdata = s_e1edl22.
 append idoc_data.
 clear idoc_data.
 idoc_data-segnam = 'E1EDL21'.
 idoc_data-sdata = s_e1edl21.
 append idoc_data.
Any help will be well appreciated.
Thanks in advance.
Regards,
 Giovanni

Hi,
following in debugging mode the abap code of the INCLUDE ZXTRKU02 where is defined the TABLES IDOC_DATA STRUCTURE EDIDD, I find that all field of the table IDOC_DATA are not set. More exactly my expectation is to find values for SEGNUM, HLEVEL, PSGNUM.
In a few words I need to execute an enhancement, via abap code, of the struscure of the idoc before sending it out since I have a requirement to test this enhancement in my XI environment, receiving as input this ideoc modified.
Then, I need to add a new segment and one child.
Any suggestion will be well appreciated.
Thanks in advance.
Regards,
 Giovanni

Need help in ABAP code to Enhance the Extract Structure ?????

Hi all,
 I want to enhance the extract structure to get KBETR & KBRUE fields of KONP table since it didnt allow me to add those fields while creating the generic extractor because of currency key problems. I want to read all KONP records into internal table with KNUMH (Key). Next, I want to fill them into ZZKBETR & ZZKBRUE of Extract Structure ZOXUR40065 in loop.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
TABLES: KONP.
Could you please help me in completing the ABAP code?
Thanks,
Venkat.

Hello Manga,
 I have included the following code in ZXRSAU01:
WHEN 'ZREBATE'.
PERFORM ZREBATE_EXIT TABLES C_T_DATA.
After Double click on ZREBATE_EXIT on perform statement, it created ZXRSAF01 include and the following code is added in it:
FORM ZREBATE_EXIT TABLES FP_C_T_DATA STRUCTURE ZOXUR40065.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
FIELD-SYMBOLS: <l_c_t_data> TYPE ZOXUR40065.
LOOP AT fp_c_t_data ASSIGNING <l_c_t_data>.
reb_tabix = sy-tabix.
select single KBETR KBRUE
into (<l_c_t_data>-ZZKBETR,
<l_c_t_data>-ZZKBRUE,
from KONP
where KNUMH eq <l_c_t_data>-KNUMH.
if sy-subrc eq 0.
MODIFY fp_c_t_data FROM <l_c_t_data> INDEX reb_tabix.
endif.
CLEAR:reb_tabix.
ENDLOOP.
ENDFORM.
When I tried to Activate this ZXRSAF01 include, it fails with 'The FORM "ZREBATE_EXIT" does not exist'.
Should it be FP_C_T or P_C_T? I found P_C_T in ZXRSAF01 include.
What is wrong with it, please ?
 Can't I add this whole code in main include ZXRSAU01itself?
The Extractor ZREBATE is based on KONA, KONH & KONP tables. This Extractor and KONA table have the same 4000 records and KONP has 13000 records. I want to extract KBERT & KBRUE from KONP.
 Thanks in advance.
Regards,
Venkat

Noob needs help with this code...

Hi,
I found this code in a nice tutorial and I wanna make slight
adjustments to the code.
Unfortunately my Action Script skills are very limited... ;)
This is the code for a 'sliding menue', depending on which
button u pressed it will 'slide' to the appropriate picture.
Here's the code:
var currentPosition:Number = large_pics.pic1._x;
var startFlag:Boolean = false;
menuSlide = function (input:MovieClip) {
if (startFlag == false) {
startFlag = true;
var finalDestination:Number = input._x;
var distanceMoved:Number = 0;
var distanceToMove:Number =
Math.abs(finalDestination-currentPosition);
var finalSpeed:Number = .2;
var currentSpeed:Number = 0;
var dir:Number = 1;
if (currentPosition<=finalDestination) {
dir = -1;
} else if (currentPosition>finalDestination) {
dir = 1;
this.onEnterFrame = function() {
currentSpeed =
Math.round((distanceToMove-distanceMoved+1)*finalSpeed);
distanceMoved += currentSpeed;
large_pics._x += dir*currentSpeed;
if (Math.abs(distanceMoved-distanceToMove)<=1) {
large_pics._x =
mask_pics._x-currentPosition+dir*distanceToMove;
currentPosition = input._x;
startFlag = false;
delete this.onEnterFrame;
b1.onRelease = function() {
menuSlide(large_pics.pic1);
b2.onRelease = function() {
menuSlide(large_pics.pic2);
b3.onRelease = function() {
menuSlide(large_pics.pic3);
b4.onRelease = function() {
menuSlide(large_pics.pic4);
I need to adjust five things in this code...
(1) I want this menue to slide vertically not horizontally.
I changed the 'x' values in the code to 'y' which I thought
would make it move vertically, but it doesn't work...
(2) Is it possible that, whatever the distance is, the
"sliding" time is always 2.2 sec ?
(3) I need to implement code that after the final position is
reached, the timeline jumps to a certain movieclip to a certain
label - depending on what button was pressed of course...
I tried to implement this code for button number two...
b2.onRelease = function() {
menuSlide(large_pics.pic2);
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
--> sliding still works but it doesn't jump to the
appropriate label...
(4) I wanna add 'Next' & 'Previous' buttons to the slide
show - what would be the code in this case scenario ?
My first thought was something like that Flash checks which
'pic' movieclip it is showing right now (pic1, pic2, pic3 etc.) and
depending on what button u pressed u go to the y value of movieclip
'picX + 1' (Next button) or 'picX - 1' (Previous button)...
Is that possible ?
(5) After implementing the Next & Previous buttons I need
to make sure that when it reached the last pic movieclip it will
not go further on the y value - because there is no more pic
movieclip.
Options are to either slide back to movieclip 'pic1' or
simply do nothing any more on the next button...
I know this is probably Kindergarten for you, but I have only
slight ideas how to do this and no code knowledge to back it up...
haha
Thanx a lot for your help in advance !
Always a pleasure to learn from u guys... ;)
Mike

Hi,
I made some progress with the code thanx to the help of
Simon, but there are still 2 things that need to be addressed...
(1) I want the sliding time always to be 2.2 sec...
here's my approach to it - just a theory but it might work:
we need a speed that changes dynamically depending on the
distance we have to travel...
I don't know if that applies for Action Scrip but I recall
from 6th grade, that...
speed = distance / time
--> we got the time (which is always 2.2 sec)
--> we got the disctance
(currentposition-finaldestination)
--> this should automatically change the speed to the
appropriate value
Unfortunately I have no clue how the action script would look
like (like I said my action script skills are very limited)...
(2) Also, one other thing I need that is not implemented yet,
is that when the final destination is reached it jumps to a certain
label inside a certain movieclip - every time different for each
button pressed - something like:
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
that statement just doesn't work when I put it right under
the function for each button...
Thanx again for taking the time !!!
Mike

Help with html code - inserting video into Muse

I am seeking help writing the code to insert a video into Muse. I uploaded video into my Business Catalyst hosting. I need it to autoplay, loop and not show any controls or frames.
When I host video on Vimeo or YouTube, I see markings on the video that is why I am trying to just host in the same place that the files are stored for my website. If there is a way to host on youtube with out any markings showing up on the video I would be open to that too.
I don't want to see any play button or time bar.
Thanks in advance!!

Hello,
Just as an FYI - we also have an HTML5 video tool over at MuseThemes.com that achieves this, but works on mobile devices as well. The link above looks like it uses Flash, which isn't common anymore since the release of HTML5 based video.
Simply drag the widget out onto your canvas, and link up your videos / set options like loop, controls visible, etc. It's quite a flexible widget, and there's a complete training video included so you don't get stuck
Check out the widget here
Just wanted to provide another alternative that could be helpful. Cheers!
Steve Harris
MuseThemes.com

Help with date code

Sry about this amount of code lines.... but i realy need help...
I must insert into a table, the date, like 10/12/2009, and the time, like 22:34:12... but, when i select the date from a datepicker, and insert the time into a text field... i got this result:
if the date inserted was 12/12/2009 and the time 22:34:12
result is.......................12/12/0922 34:12:00 <<<<< it´s getting just the two lasts number of the year and inserting the two firsts number of the time into the year, like year 0922 ....
I´m using a javascript source to create a datepicker......
and that is the procedure to insert into the table.......
PROCEDURE set_atendimento(
p_id_chamado_atendimento IN chamado_atendimento.id_chamado_atendimento%TYPE,
p_id_chamado IN chamado_atendimento.id_chamado%TYPE,
p_informacao IN chamado_atendimento.informacao%TYPE,
p_datahora_inicio IN chamado_atendimento.datahora_inicio%TYPE,
p_datahora_fim IN chamado_atendimento.datahora_fim%TYPE,
p_hora_inicio IN VARCHAR2,
p_hora_fim IN VARCHAR2
IS
v_inicio DATE;
v_fim DATE;
BEGIN
v_inicio := TO_DATE(TO_CHAR(p_datahora_inicio || p_hora_inicio), 'DD/MM/YYYY HH24:MI:SS');
v_fim := TO_DATE(TO_CHAR(p_datahora_fim || p_hora_fim), 'DD/MM/YYYY HH24:MI:SS');
UPDATE
chamado_atendimento
SET
informacao = UPPER(p_informacao)
WHERE
id_chamado_atendimento = p_id_chamado_atendimento;
IF SQL%NOTFOUND THEN
INSERT INTO
chamado_atendimento
(id_chamado_atendimento, id_chamado, id_operador, datahora_inicio, datahora_fim, informacao)
VALUES
(SEQ_CHAMADO_ATENDIMENTO.nextval, p_id_chamado, pkg_operador.get_id_operador, v_inicio, v_fim, UPPER(p_informacao));
END IF;
END;
that is the JAVASCRIPT
<script language="JavaScript" type="text/JavaScript">
$(function(){
$.datepicker.setDefaults({
showOn: 'button',
buttonImage: '/i/themes/fwsac/includes/jquery/images/calendario.gif',
buttonImageOnly: true,
closeText: 'Fechar',
prevText: '<Anterior',
nextText: 'Próximo>',
currentText: 'Hoje',
monthNames: ['Janeiro','Fevereiro','Março','Abril','Maio','Junho','Julho','Agosto','Setembro','Outubro','Novembro','Dezembro'],
monthNamesShort: ['Jan','Fev','Mar','Abr','Mai','Jun','Jul','Ago','Set','Out','Nov','Dez'],
dayNames: ['Domingo','Segunda-feira','Terça-feira','Quarta-feira','Quinta-feira','Sexta-feira','Sabado'],
dayNamesShort: ['Dom','Seg','Ter','Qua','Qui','Sex','Sab'],
dayNamesMin: ['Dom','Seg','Ter','Qua','Qui','Sex','Sab'],
dateFormat: 'dd/mm/yy',
firstDay: 0,
isRTL: false,
showAnim: 'slide'
$('#P5004_DATAHORA_INICIO , #P5004_DATAHORA_FIM').datepicker({ beforeShow: fdateRange });
function fdateRange(input){
return {
minDate: (input.id == "P5004_DATAHORA_FIM" ? $("#P5004_DATAHORA_INICIO").datepicker("getDate") : null),
maxDate: (input.id == "P5004_DATAHORA_INICIO" ? $("#P5004_DATAHORA_FIM").datepicker("getDate") : null)
</script>
what i must change to get the 4 numbers of the year and all numbers of the time and conca " || " with the date??
can someone help with this, pls??

Hello brugo,
Try this:
v_inicio := to_nchar((to_date(p_datahora_inicio || p_hora_inicio , 'DD/MM/YYYY HH24:MI:SS')), 'DD/MM/YYYY HH24:MI:SS');
v_inicio := to_nchar((to_date(p_datahora_fim || p_hora_fim , 'DD/MM/YYYY HH24:MI:SS')), 'DD/MM/YYYY HH24:MI:SS');When I substitute strings: '10/12/2009' for p_datahora_inicio and '22:30:05' for p_hora_inicio, using this format string, I get: 10/12/2009 22:30:05 as a result.
Don.
You can reward this reply by marking it as either Helpful or Correct :)

Help with html code. not running properly once on server

The video works fine in captivate and works once i publish it, but when I try to upload it onto the server it does not. This is my first time using captivate 4, and when I matched the codes from my old movies they were quite different. So I just messed with the code I had and made it lok like the old vodes and it runs fine on the server.
I was wondering if anyone had any ideas on what is going on with the code that it does not work on the server?
Thank you!!!!!
-danielle

Hello Sue. It's very easy actually.
If you have the lastest update of Muse CC from Nov 2013, there is a FREE Muse Library by musegrid.com that you can download from the Adobe Muse Exchange page that does this specifically using Google Analytics. Here is the direct link should you like to check it out:
http://muse.adobe.com/exchange-library/add-google-analytics
Start by "Right Clicking" on the "Master Page Icon" in the "Plan View" and choose "Page Properties" from the list of menu options available.
This will open up the "Page Properties Dialog Box" for the entire site. Once that dialog box is open, paste your code into the "Metadata" tab section (I believe that tab is displayed at default - at least on the Mac it is - I'm pretty sure it's the same on the Windows platform).
All anaytics embed code goes in the <head> tag of an html page (note: it actually says "HTML for <head>" at the top of the embed window area - making it helpful to know you're in the right area). This is also where you would add any <meta> tags too like facebook's OpenGraph code etc.
If using more than one master, included it to all masters. If just using it on a specific page - say like a landing page, just go to that particular page in your site's "Plan View" and paste it there instead.
Incase i get too "wordy" i've attached screen shots of what these should look like.
Good luck Sue!
And congratulations on a nice new computer too - its got "juice".

Need help with HTML5 code

What is wrong with this code? It does not play. It should play in Windows-7 and XP with IE8.
Also, on the screen there is a large white area where the <video> code is. Why?
How do I get rid of it?
Thanks.
<!DOCTYPE HTML>
<html>
<head>
<title>video testing</title>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body>
Click the <a href="Download" _mce_href="http://www.amelox.com/Media/UX-CT-Tour-Short-1024d12db.mp4">Download">http://w ww.amelox.com/Media/UX-CT-Tour-Short-1024d12db.mp4">Download mp4 </a> button to start video.
Click the <a href="Download" _mce_href="http://www.amelox.com/Media/UX-CT-Tour-Short-1024d12db.webm">Download">http:// www.amelox.com/Media/UX-CT-Tour-Short-1024d12db.webm">Download webm </a> button to start video.
Click the <a href="Download" _mce_href="http://www.amelox.com/Media/UX-CT-Tour-Short-1024d12db.ogg">Download">http://w ww.amelox.com/Media/UX-CT-Tour-Short-1024d12db.ogg">Download ogg </a> button to start video.
Click the <a href="Download" _mce_href="http://www.amelox.com/Media/UX-CT-Tour-Short-1024d12db.flv">Download">http://w ww.amelox.com/Media/UX-CT-Tour-Short-1024d12db.flv">Download flv </a> button to start video.
<video width="480" height="270" controls="controls">
<source media="all" src="rtp:UX-CT-Tour-Short-1024d12db.mp4" type='video/mp4; codecs="vp8, vorbis"' />
<source media="all" src="rtp:UX-CT-Tour-Short-1024d12db.webm" type='video/webm; codecs="avc1.42E01E, mp4a.40.2"' />
<source media="all" src="rtp:UX-CT-Tour-Short-1024d12dB.ogg" type="video/ogv; codecs="theora, vorbis"" />
<object data="id=player1" width="480" height="270">
 <param name="classid" value="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" />
 <param name="movie" value="player.swf" />
 <param name="flashvars" value="UX-CT-Tour-Short-1024d12db.flv & autostart=true" />
 <param name="allowfullscreen" value="false" />
 <param name="quality" value="high" />
 <param name="wmode" value="opaque" />
 <param name="allowscriptaccess" value="always" />
<embed flashvars="file=UX-CT-Tour-Short-1024d12db.flv & autostart=true" id="player1" src="player.swf"
allowfullscreen="true" allowscriptaccess="always" width="480" height="270" />
</object>
</video>
here is some more text
</body>
</html>

Data load? Did it pass a syntax check?
Anyway, maybe this will help:
DATA: create_date TYPE sy-datum,
 update_date TYPE sy-datum,
 number_of_days_closed(4) TYPE c,
 alert_close_flag(1) TYPE c,
 result LIKE number_of_days_closed.
IF alert_close_flag EQ 'Y'.
number_of_days_closed = update_date - create_date .
ELSE.
CLEAR number_of_days_closed.
ENDIF.
result = number_of_days_closed.
Rob

Help with ABAP code in CMOD.

Similar Messages

Maybe you are looking for