Help with Action script 2.0 please
Hi,
I am new to actionscript and i could really do with some help
please. I am trying to load external movie clips into two different
containers depending on which button is clicked. Sometimes there
may be two conatiners attached to a buuton click, whilst other
buttons may only need to load one movie clip. Here is the action
script i have been using:
button1.onPress = function () {
_root.createEmptyMovieClip("container", 1);
_root.createEmptyMovieClip("container1", 2);
unloadMovie("container1");
loadMovie("scene2.swf", "container");
loadMovie("scene5.swf", "container1");
container._x = 50 ;
container._y = 110 ;
container1._x = 170 ;
container1._y = 5 ;
button2.onPress = function () {
loadMovie("scene6.swf", "container");
unloadMovie("container1");
container._x = 50 ;
container._y = 110 ;
This does load the movies, however i have to press button one
first before button two will work. Ideally i need to be able to
call any movieclip at any time. Can anyone tell me where i am going
wrong?
quote:
Originally posted by:
NedWebs
Try moving these lines outside of the button function:
_root.createEmptyMovieClip("container", 1);
_root.createEmptyMovieClip("container1", 2);
You can use "this" instead of "_root"... that'll save any
problem if you ever move this within some other movie. Also, move
the x/y assignments just under those lines since they relate to
them directly.
Hey thankyou for your help, that works now. although if i
move the x and y assignments i would have to create another
container right? Thanks again for your help.
Similar Messages
-
Help with action script please
hay guys, im having trouble with changing my action script to
allow multiple layers of the same thing in order to show a greater
sense of depth than the normal application. im using a flash
toutorial on making a sort of matrix like falling text (
link)
and im not completely understanding what to change in order to
accomplish my goal. i tryed to send them a message using their
contact page, but its broken, forcing me to find a forum. im sure
it has something to do with the third group of code where it
identifies what its using. but whenever i change anything there to
either match the identifiers or movie clip names the action script
crashes when i test the movie. any help is appreciated.
im using flash cs3 and made sure to create it all in action
script 2.0
please excuse my spelling, im sure i made a mistake
somewhere."FlashTastic" <[email protected]> wrote in
message news:e4ir4t$ru4$[email protected]..
>I don't think an enterframe will be your best bet.
>
> You might want to use something like
>
> if(_root._currentframe >= _root.totalframes){
> loadMovie("myMovie.swf",_root)
Why in the world would you do that when you can just put a
keyframe on the last frame and ..
loadMovie("myMovie.swf");
tralfaz -
I'm a beginner with flash. I created a flash file on my own.
I also created a flash file using a slideshow program. Generally I
like this program. I can insert them into my html with no problem.
I want to load the slideshow.swf file into an empty movie
clip in the flash file I created called products.swf. It works fine
using
loadMovie("slideshow.swf", call_mb_slideshow); (where
call_mb_slideshow is a empty movieclip.)
as long as the all the files are in the same folder. But, I
need the products.swf file with the empty movieclip to be in the
parent folder AND I need the slideshow.swf and the slideshow.xml
file to be in a child folder call musicbox_slideshow. When I change
the code to this:
loadMovie("musicbox_slideshow/slideshow.swf",
call_mb_slideshow);
It loads the slideshow.swf file into the movieclip fine, BUT
it doesn't know where to find the slideshow.xml file that loads the
pictures into the slideshow. It looks for it in the parent folder,
not the child folder.
How do I write the script in products.swf so that it knows
where the slideshow.xml file is? I cannot change the slideshow.swf
file code in any way. I need to do it from products.swf.I can use this code from html. I'm able to say where the swf
and xml file are. I just don't know how to do this using action
script.
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
width="768" height="576" id="tech" align="middle">
<param name="movie"
value="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
/>
<param name="quality" value="high" />
<embed
src="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
quality="high" width="768" height="576" name="tech" align="middle"
allowScriptAccess="sameDomain" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>. -
I have been developing a site and I am having issues with
something that is probably very simple. I have created several
movieclips that expand and contract as you roll over them. I wanted
to make a function/method so that when the user clicks, it takes
them to another scene in this movie. Here is the action script I am
using:
on(release) {
gotoAndPlay("Scene 9");
Unfortunately, this is not working. I thought that perhaps
the on(release) method wouldn't work on these movie clips based on
the action script I was already using to expand/contract the boxes,
but the following code works just fine:
on(release) {
getURL("home.html");
I'm stumped. Can anyone offer a suggestion as to what I
should do? Here is the web address of the page I'm working on, it
has the movie I'm having an issue with.
AndrewJW.com. The
first image on the left next to the word photography links to
another page of the site. The image of the pearl ring next to that
is the one that will not advance to another scene in the movie.
Thanks for any and all input.
AndrewJeckyl>
erm... ok i've to admit my mistake in 2nd script.
_root.gotoAndPlay() takes only ONE argument,
_root.gotoAndPlay("Scene 9", 1); won't works.
Thank for reminding me
actually this make me confuse sometime,
from the code hint in flash,
for
gotoAndPlay,
gotoAndPlay(
frame);
gotoAndPlay(
scene,
frame);
for
MovieClip.gotoAndPlay,
MovieClip.gotoAndPlay(
frame);
so, gotoAndPlay can accept 2 arguments only when use without
"something dot" in front.
if Andrew's script is attached to an instance of button
symbol, we can use
on(release) {
gotoAndPlay("Scene 9", 1);
Since Andrew will attach the script to an instance of
movieclip, he can only use:
on(release) {
gotoAndPlay("Scene 9");
where he have to give the label to the 1st frame of "Scene 9"
same name with the scene.
Am i right Jeckyl?
I heard many people said "scene"+"script"="buggy", but some
time I get it "works". What is your opinion? -
Help with action script number guessing game
can someone help me in flash cs6 to make a simple guessing game, i just need help with the coding. making a guessing game from 1-100
The constructor is coded to assign a random number for
the user to guess
• In the section of code indicated by the comments
(within the handler function doGuess()), write condition
statements that guide the user to guessing the number
using text written to the output
• Trace out the users' guess, plus a message
• Messages for the user depending how close they are from the
guess, condition each of the following:
• Guesses correctly, +/-1 from the guess, +/-10 from the guess,
+/-20 from the guess, +/-40 from the guess, all other guessesclose, it's actually an in class practice lab. After doing this we have to do another one that needs to be submitted. I just need help with the coding for this because i dont know how to start at all. let alone the actual lab.
-
Help with action script to load image
I have a Fla file that is works to slide open doors from
button hit and open sliding doors, but I cannot get an image to
load and display when the door begins to open, can some please
help. I can send th fla file for viewing.I did modify the script. My images were in Adobe RGB (1998) and I modified the script to match them from that to the costco printer one. The images were changed as by looking at the screen, by printing to costco, and looking at the new profile assigned. But they didn't look the same on the screen or printed as those from either Preview or ColorSyncUtility.
I finally wrote a 'shortcut' in iKey to just change all the open images in ColorSync Utility.
Note: Graphic Converter might work. It does change the image on the screen but I haven't printed it. The screen does not look the same as ColorSyncUtility, It does not give you the choice of intent either. -
Help with Action script, experts needed!
Hi, I have a website just put up today, all I need is advice, or better still, someone who can write these actionscripts for my site. Basically, I need to put into function, the three grey buttons, Print/ecard/Download on the lower right portion of the panel. Thanks in advance, I'll buy you coffee
JT
my site: http://www.jetpixels.comquote:
Originally posted by:
NedWebs
Try moving these lines outside of the button function:
_root.createEmptyMovieClip("container", 1);
_root.createEmptyMovieClip("container1", 2);
You can use "this" instead of "_root"... that'll save any
problem if you ever move this within some other movie. Also, move
the x/y assignments just under those lines since they relate to
them directly.
Hey thankyou for your help, that works now. although if i
move the x and y assignments i would have to create another
container right? Thanks again for your help. -
Help with Adobe.premiere.elements12. Please
It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos within Elements.In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
Once you've reached just new Imports of camera output, you'll be flying along. -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
Hi,
I found this Apple script online and here's how it works:
tell application "QuickTime Player"
activate
try
if not (exists document 1) then display dialog "Please open a QuickTime movie." buttons {"Cancel"} default button 1 with icon 1
set thefile to (choose file name)
save document 1 in thefile
close document 1
end try
end tell
+I run the Apple script+
*1. It prompts me to open a movie file in Quicktime*
+I open a movie in Quicktime+
*2. It prompts me for an name and directory to save the new file in*
+I enter a name and directory+
*3. It saves a new reference movie in said directory with said name*
This is useful if I want to customize every file, but unfortunately, I just want to mass create reference movies for a whole bunch of files.
What I am looking for is for an Apple script that is a drag and drop application, so I can drop say 100 movie files or so, and have the Apple script create reference movie files with the same name and in the same directory automatically with no prompts.
Since I am unfamiliar with Apple script I was wondering if someone would be able to edit my existing script to do what I want.
Thanks so much for your help!Use Automator. It's great for repetitious tasks (like the one you've described), and it's very user-friendly. Open Automator, create a new workflow that executes the action you want, and you can apply that action to the resources you wish to edit.
Good resource here:
http://bit.ly/ -
Transparency with action script
I have a swf file and i want to give it a transparent background to the stage. I understand that it's possible to give it the transparency through the HTML publish setting using the 'transparent windowless' property.
However, i wanted to know whether there's an actionscript property to give the same transparency effect to the stage. like the opactiy or something (sorry, I might be wrong)
The thing is I have a external preloader which loads the content swf and when it gets loaded, the stage loses it's transparency.
any help please with the action script on transparency?you're either misunderstanding what you see or not accurately explaining what you see.
there's only one html that embeds a swf. that embedded swf's stage color will be seen (or not depending on the html settings). no loaded swf's background color will be seen. all loaded swf graphics will be seen. everything is this paragraph are facts that you cannot change using actionscript or anything else.
if you removed the graphics from content.swf there's no way it can "still show". the below paragraph explains the ways you could misinterpret what you're seeing:
if you removed graphics from content.fla and FAILED to publish a new swf, graphics will still show. and, if you're testing in a browser, and fail to clear your cache you may be seeing an old swf version that still has background and other graphics. -
Problem with action script calculations
I have a simple action script 3 code that will not calculate the correct answer on my PC. I'm running flash cs5 on Window 7 OS. I can move the file to another machine running flash cs4 and it works, but when I run it on my laptop, I get funky answers. see cold below. I have uninstalled and reinstalled cs5 , run the cleanscript for cs5 and cs4 to make sure everything was removed. I have uninstalled and reinstalled flash player. but nothing seems to work. Any help will be appreciated. It acts like Action Script 3 is corrupt or something else that related to Action Script 3. Everything else seems to work. I also have a preloader running with the same issue. It is should be showing the percentage completed but it go 2 5 50 4 32 or something funky like that. Please help.
the code I'm using.
function calculateTotal(evtObject:MouseEvent):void {
var price:Number;
var totalCost:Number;
var numberOfJerseys:Number;
if (jerseyType.text == "2") {
price = 12;
if (jerseyType.text == "1") {
price = 10;
if (playerNames.text == "Y" || playerNames.text == "y") {
price += 1.50;
numberOfJerseys = int(numberOfPlayers.text) +int(numberOfCoaches.text);
totalCost = numberOfJerseys*price;
total.text = String(totalCost);
calc_btn.addEventListener(MouseEvent.CLICK, calculateTotal);
the preloader percentage is
var percent:int = amtLoaded*100
percent_txt.text = String(percent);HELLO,
just check navigateToURL() -
I was wondering if someone could help me with a simple bit of action script 3. I need to make a movie clip (single_mc) disappear when the user clicks on the mouse (stop_btn). Here’s what I have so far.
function setProperty(event:MouseEvent):void
single_mc.alpha=0;
stop_btn.addEventListener(MouseEvent.CLICK, setProperty);
Also I was wonder if you could recommend an Action script 3 book for me. I would like one that is not a training book, but has situations and then the script written out. For example: I click a button and a movie symbol disappears from the stage. I am a graphic artist, that from time to time, needs simple interaction in flash, but cant justify the time to learn the script.
Thanks for your timeuse the snippets panel to help with you with sample code for basic tasks.
function setProperty(event:MouseEvent):void
single_mc.visible=false;
stop_btn.addEventListener(MouseEvent.CLICK, setProperty); -
I found a script online that turns my images into a square (by extending the canvas size of the short side to match the length of the long side) which is awesome, but I would like to do an additional step and I have no scripting experience so hopefully someone can help.
now that my images are square I want to set a maximum dimension of 2500x2500 px, i have found scripts to set a resolution to a specific size but what I want to make sure I avoid is upsampling, so I just want any image larger than 2500x2500 px to down sample to 2500x2500 px
any knowledge on the code for this would be much appreciated.
When I am at the machine with the script I currently use I will paste it here in the meantime if you know something about scaling images down but preventing scaling them up I could probably chimp with the code I have and make it work.Photoshop shipts with a plug-in script that will do that for you. its found under menu File>Automate>Fit Image. Set both width and height to 2500 and check do not resize images that fit so your small square images will not be resized up in size. You could also just create an action that uses both scripts
step 1 menu File>Scripts>Make canvas Square.
setp 2 menu File>Automate>Fit Image. The 2500 x 2500 no upsize option settings will be recorded into the step and when the action is used its dialog will be bypassed and the recorded settings will ne used.
You can then batch the action using menu file>Automate>Batch or menu File>Scripts>Image Processor. -
Need help with Flash/PHP online form, please help, URGENT!
ive made my online form with the scripts shown below, when i
submit i dont get any errors... but i also dont receive any emails
from the form, if you can see anything that ive done wrong please
help me out..
-------------------------------------------------------PHP
mailer.php------------------------------------------------------------------
<?php
$fname = $_REQUEST["fname"];
$mail = $_REQUEST["mail"];
$add1 = $_REQUEST["add1"];
$add2 = $_REQUEST["add2"];
$add3 = $_REQUEST["add3"];
$town = $_REQUEST["town"];
$county = $_REQUEST["county"];
$postcode = $_REQUEST["postcode"];
$telephone = $_REQUEST["telephone"];
$subject = $_REQUEST["subject"];
$message = $_REQUEST["message"];
$full_message = $_SERVER['REMOTE_ADDR'] . "\n\n" . $message;
$message= $full_message;
$fname = stripslashes($fname);
$mail = stripslashes($mail);
$add1 = stripslashes($add1);
$add2 = stripslashes($add2);
$add3 = stripslashes($add3);
$town = stripslashes($town);
$county = stripslashes($county);
$postcode = stripslashes($postcode);
$telephone = stripslashes($telephone);
$subject = stripslashes($subject);
$message = stripslashes($message);
$subject = "Vision Ten Online Form ". $subject;
if(isset($fname) and isset($mail) and isset($add1) and
isset($add2) and isset($add3) and isset($town) and isset($county)
and isset($postcode) and isset($telephone) and isset($subject) and
isset($message)){
mail("[email protected]", $fname, $mail, $add1,
$add2, $add3, $town, $county, $postcode, $telephone, $subject,
$message "From: $mail");
?>
-------------------------------------------------------PHP-------------------------------- ----------------------------------
-----------------------------------------------ACTIONSCRIPT
for the
form----------------------------------------------------------
stop();
System.useCodepage = true
this.sent.onRelease = function () {
my_vars = new LoadVars ();
my_vars.fname = fname_box.text;
my_vars.mail = mail_box.text;
my_vars.add1 = add1_box.text;
my_vars.add2 = add2_box.text;
my_vars.add3 = add3_box.text;
my_vars.town = town_box.text;
my_vars.county = county_box.text;
my_vars.postcode = postcode_box.text;
my_vars.telephone = telephone_box.text;
my_vars.subject = subject_box.text;
my_vars.message = message_box.text;
if (my_vars.fname !="" and my_vars.mail !="" and
my_vars.add1 !="" and my_vars.town !="" and my_vars.county !="" and
my_vars.postcode !="" and my_vars.telephone !="" and
my_vars.subject !="" and my_vars.message !="") {
my_vars.sendAndLoad("script/mailer.php", my_vars, "POST");
gotoAndStop(2);
} else {
error_clip.gotoAndPlay(2);
my_vars.onLoad = function (){
gotoAndPlay(3);
fname_box.onSetFocus = mail_box.onSetFocus =
add1_box.onSetFocus = add2_box.onSetFocus = add3_box.onSetFocus =
town_box.onSetFocus = county_box.onSetFocus =
postcode_box.onSetFocus = telephone_box.onSetFocus =
subject_box.onSetFocus = message_box.onSetFocus = function () {
if (error_clip._currentframe !=1) {
error_clip.gotoAndPlay(6);
-----------------------------------------------ACTIONSCRIPT------------------------------- ---------------------------that php mail function looks suspect. that should be
mail(to,subject,message,headers,parameters)
Maybe you are looking for
-
Can any one help me . what is ei in ecc 6.0
hi friends help me out my dought is this E.I in ecc 6.0 is called netweaver xi or different ?
-
Hi, I have uploaded few files( text and word documents) through OCS UI. When I try to search for documents using Content, noting is returning. I dont know why this is not working. I want to search of all documents which has content serial# xxxx. I am
-
Adobe LifeCycle in a JEE5 application
Hello, I would like to know if it's possible to access Adobe lifecycle API in a "standard" JEE5 application like it's possible to do in a WD4J application? My need is to be able to generate pdf documents, that come from user input and Adobe forms. We
-
I have a SB li've, however my install cd is slighty damaged. I cant get a normal install. Can anybody send me a copy of the cd please, and e-mail it. Its damaged in the perfect spot so its not installed right. It works but I cant update the drivers b
-
Is there any way to copy the file location path like how you can in Windows? ie, when you press "get info" under general info, it displays where the file is eg. /Users/bc/Desktop/file.doc is there any way to copy this piece of text easily and paste i