Help With Activation Process

I currently have verizon Wireless sadly. I am looking to sign up for the iPhone GoPhone plan which is slightly cheaper than the normal plan plus I wont have to worry about have a contract with AT&T. Does anyone have ay tips to definatly fail the credit check? I know its an odd question but I really want the iPhone.

Do you know ow to do it at the store? I doubt they would let me get it if I just asked for it.

Similar Messages

I need help with activating Adobe MC CS4

Good day! I need help with activating Adobe MC CS4. Recent installation was not deactivated.I have Adobe License Certificate ID and other data and can provide it. Now activation not accept serial number provided in certificate.

What message do you get when the serial number is not accepted?

Help with scheduling Process Flows in Workflow in 10gR2

Dear All
I am after some help with the scheduling of process flows (PF) in Workflow in OWB 10gR2. I am trying to set up some PF’s to handle the refresh of some staging tables from various source systems. I have created a separate Process Flow Module for each source systems, mainly just to keep them separate and organised. I have a number of mappings which all run fine if execute manually or linked directly to a schedule/job. The problem I am encountering is when I try to run process flows from schedules. I have created process flows ok and have run them manually and they complete fine so I know that the content of the PF is ok. After linking and deploying the jobs I can never get all the process flows to run from the various schedules. What appears to happen is that the first PF works ok and any other PF that are within the same Process Flow Module/packages also runs ok even if its running off as different schedules. However PF’s under the other Process Flow Module fail with the following error
CC_DAILY_0400
Description :
Runtime User : OWBRT_USER
Started : 2006-08-31 04:00:00.0
Status      Log
Error      ORA-20002: 3114: Activity 'PACK_1/CC_DAILY_0400' is not a process.
ORA-06512: at "OWF_MGR.WF_ENGINE", line 3920
ORA-06512: at line 1
Following this error the PF will not even run manually! If I then stop the schedule and either drop or replace this failed PF thus redeploying, the PF then runs fine manually and if the restart the schedule it runs ok the next evening. My problem is that this then appears to impact on the other PF’s which all though have not been touched and ran ok the previous evening they then fail the following evening with the same error
WS_DAILY_2400
Description :
Runtime User : OWBRT_USER
Started : 2006-09-01 00:00:01.0
Status      Log
Error      ORA-20002: 3114: Activity 'PACK_1/WS_DAILY_2400' is not a process.
ORA-06512: at "OWF_MGR.WF_ENGINE", line 3920
ORA-06512: at line 1
ORA-20002: 3114: Activity is not a process.
I basically can not get both sets to run even though they are on separate modules and separate schedules.Has anyone any idea as to what could be wrong or if I am setting something up in a strange way which would cause these symptoms.
All help or advice greatly appreciated
Regards Kevin

Dear All
I am after some help with the scheduling of process flows (PF) in Workflow in OWB 10gR2. I am trying to set up some PF’s to handle the refresh of some staging tables from various source systems. I have created a separate Process Flow Module for each source systems, mainly just to keep them separate and organised. I have a number of mappings which all run fine if execute manually or linked directly to a schedule/job. The problem I am encountering is when I try to run process flows from schedules. I have created process flows ok and have run them manually and they complete fine so I know that the content of the PF is ok. After linking and deploying the jobs I can never get all the process flows to run from the various schedules. What appears to happen is that the first PF works ok and any other PF that are within the same Process Flow Module/packages also runs ok even if its running off as different schedules. However PF’s under the other Process Flow Module fail with the following error
CC_DAILY_0400
Description :
Runtime User : OWBRT_USER
Started : 2006-08-31 04:00:00.0
Status      Log
Error      ORA-20002: 3114: Activity 'PACK_1/CC_DAILY_0400' is not a process.
ORA-06512: at "OWF_MGR.WF_ENGINE", line 3920
ORA-06512: at line 1
Following this error the PF will not even run manually! If I then stop the schedule and either drop or replace this failed PF thus redeploying, the PF then runs fine manually and if the restart the schedule it runs ok the next evening. My problem is that this then appears to impact on the other PF’s which all though have not been touched and ran ok the previous evening they then fail the following evening with the same error
WS_DAILY_2400
Description :
Runtime User : OWBRT_USER
Started : 2006-09-01 00:00:01.0
Status      Log
Error      ORA-20002: 3114: Activity 'PACK_1/WS_DAILY_2400' is not a process.
ORA-06512: at "OWF_MGR.WF_ENGINE", line 3920
ORA-06512: at line 1
ORA-20002: 3114: Activity is not a process.
I basically can not get both sets to run even though they are on separate modules and separate schedules.Has anyone any idea as to what could be wrong or if I am setting something up in a strange way which would cause these symptoms.
All help or advice greatly appreciated
Regards Kevin

I need help with the processes running a media server.

Hi there! I need some help with the following log please. The processes listed I am assuming are the current processes being used from my MacBook Pro to the media server? Is that correct? Are these common processes?
Incident Identifier: EC931B64-E141-4C64-B428-427DF014C7E8
CrashReporter Key: b16be41bf16206d8f231e7e71676ab2a9c4dd25e
Hardware Model: iPhone4,1
OS Version: iPhone OS 5.0.1 (9A405)
Kernel Version: Darwin Kernel Version 11.0.0: Tue Nov 1 20:34:16 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8940X
Date: 2012-08-24 16:06:18 -0400
Time since snapshot: 152 ms
Free pages: 1195
Wired pages: 88383
Purgeable pages: 0
Largest process: mediaserverd
Processes
 Name UUID Count resident pages
 atc <2271ed33ec773eeb9f381bf1baac9dee> 390
 securityd <e31a714c227a3d1c98ef8aacd44d91ee> 243
 assetsd <281396d3e7d831fbb6a5374157663dbc> 1370
 MobileMail <7064f2baf3f23db987bc8ec99855fe53> 1438 (jettisoned)
 mstreamd <cbe9881735043a389e7cdad3b5bcf5ce> 1099 (jettisoned)
 Camera <88291709452932ac9cbd0f1c06902214> 3105 (active)
 dataaccessd <b4f61f117ee635c48329af8572733d30> 1760
 MobilePhone <fe38c6944a053c9187b41ee50aa151b0> 5549
 networkd <6ee7a78e56073f6e8db4c2cc3265fdb4> 170
 aosnotifyd <58089d732ab43bbea0aec4a6f812f446> 320
 BTServer <e03baab8e0103188979ce54b87591065> 261
 aggregated <68a25a1690cb372096543a46abed14d7> 337
 apsd <e4b6e6e4f31e36f79815747ecbf52907> 291
 fairplayd.N94 <2c0105776e393b39ba95edffaf3bdd17> 294
 fseventsd <78af02202422321885dfc85c24534b0e> 170
 iapd <3ee7f82879033b4fb93b9cf1f4ecae29> 366
 imagent <8e2042f2ec9e3af9ba400f031f1bbfa7> 416
 mDNSResponder <b75f43f012ad3d9ea172d37491994e22> 265
 mediaremoted <b9fa7d1381013c2fa90ea134ff905f59> 258
 mediaserverd <478e5e8345c83be5ba1868906813bb75> 6774
 ubd <7eaf0b0ca5b83afabecb0dfaa38c7a19> 389
 wifid <e176ab123beb3000bdb89e020612c1d6> 284
 locationd <91c84ab19dd03e4ab1b4cc30178ab1c0> 831
 powerd <25ddef6b52e4385b819e777dd2eeed3c> 167
 lockdownd <a68aa1526ef13a9bb4426bb71ffc1e3c> 250
 CommCenter <51922c9a50e73fe3badccaa4b1b1123b> 781
 syslogd <dd3766bcb1213e91b66283635db09773> 107
 SpringBoard <7506c20d86da3f1dbe9bf38f8bda253d> 5673 (active)
 configd <3430c0025ed13f56800a329b7254d2ae> 418
 notifyd <3793fabace3a385687b3c29c1fa1fcac> 252
UserEventAgent <6e1cabc1ec6d372c90a6bdeaa7b258fa> 433
 launchd <cc35dd7a872334319ed028e6bbeae081> 133
**End**
Thanks a bunch!!!

COULD NOT OF BEEN BOUGHT BRANDNEW IN 2011** apologies

Help with batch processing

Hi, I am having trouble with batch processing. I want to apply adaptive noise reduction (ANR) to several files from the same source tapes. So, following the help instructions, I create a script from one file. When I try to apply it to the other files, instead of applying ANR to them, it simply saves them as is. The steps I perform are as follows:
I select the entire wave (I have also tried it without first selecting)
I open the scripts box in the file menu
I click on open/new script collection and create a new script
I title the new script
I click 'record'
I close the scripts box
I run ANR on the file
I go back to the scripts box and click 'stop current script'
I click add to collection
I close the scripts box
I open the batch processing box
I select the files, then the script, then I click to start processing
When I try to apply this to script to other files, it saves them but doesn't apply ANR.
Can anyone suggest what I am doing wrong? Also, in the scripts box, there are three options for the type of script that I can create. One is highlighted: 'Scripts start from scratch.' Is that the correct one to use? If not, how do I select one of the others? I click on them but nothing happens. Finally, when creating a script, do I save the file before or after clicking 'stop record'? I have tried it both ways but don't know which is correct (neither seems to make a difference).
Just to be as thorough as possible, below is the text of one of my scripts, in case that contains any clues. Thanks so much for any and all help!!
Collection: doubletnr
Title: d2
Description:
Mode: 2
Undo: 0
Selected: none at 0 scaled 109479495 SR 44100
Freq: Off
cmd: Channel Both
Selected: 0 to 109479494 scaled 109479495 SR 44100
Freq: Off
Comment: Restoration\Adaptive Noise Reduction
cmd: {EA93BBBE-0B8F-47D6-AC6D-B67B46524E41}
1: 52,AAAÛÚZAAQãýÇÛÚÚAAAĎč¸āĂ}úÓ~ipkiëåÁëåÁ
2:
3: 13
4: 0
5: 0
6: 3190728
7: 0
8: 0
9: 0
10: 1
Freq: Off
End:

This is what my script looks like. Although I was worried about the strange characters in the script, it does work.
Make sure that the script you use is suitable for the sample rate and bit depth of the file. E.g. if you have 44100/32-bit files, then don't use a script that was recorded on a file with e.g. 48000/16-bit. If required, resample or make different scripts for different rates/depths.
Collection: Test ANR AA Forum
Title: Test ANR AA Forum
Description:
Mode: 4
Undo: 1
Selected: 0 to 9233563 scaled 9233563 SR 44100
Freq: Off
cmd: Channel Both
Selected: 0 to 9233563 scaled 9233563 SR 44100
Freq: Off
Comment: Restoration\Adaptive Noise Reduction
cmd: {EA93BBBE-0B8F-47D6-AC6D-B67B46524E41}
1: 52,AAAÛÚZAAQãýÇÛÚÚAAAĎč¸āĂ}úÓ~ipkiëåÁëåÁ
2:
3: 13
4: 0
5: 0
6: 154705552
7: 0
8: 0
9: 0
10: 1
Freq: Off
End:

Urgent help with BPEL process

Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thanks,
Dps

Read the Demo examples given with Oracle BPEL Process Manager.
I am now at a proficient level in BPEL in the past 1 year,
still need to reach the excellent mark.
Thanks & Regards,
Gopal D. Kalsekar
Sr. Software Developer
Business Solutions (eGroup)
M.H. Alshaya Company W.L.L.
www.alshaya.com
Jai Maharashtra
P :- (965) 224 3598
F :- (965) 224 2488
E :- [email protected]

Help with Active X code

Hello Everyone,
I am trying to update my quicktime code to comply with active x. I have been following the istructions on this site here.
http://developer.apple.com/internet/ieembedprep.html
I get through steps 1. and 2. just fine but when I get to 3. I get stumped. I am not sure what Ia m supposed to do here. Can anyone shed some lite on rhis for me.
Thank you very much.

I downloaded the app and did the external method that you suggested and still nothing. Here is the code it generated, does this look right?
If so I am confused as to where this code goes in the HTML file.
<script language="JavaScript" type="text/javascript"></script>

Help with inline processing for Memory Optimization

Hello all. I have an embedded PXI system who's sole purpose is to gather digital data. I've been tasked to see just how much data we can gather on our PXI-8106 Real-Time controller before we run out of our 2GB memory.
The digital data is being captured by a PXI FGPA card and being DMA'd up to the Real-Time process running on the controller. The storage for the data on the controller uses a functional global that is pre-allocated before the test begins to maintain determinism and prevent jitter. Each 32-bit digital word that the FGPA captures has a 32-bit word-counter and a 32-bit timestamp attached to it prior to being sent up through the DMA channel. Once the test is complete, the large "compressed data" array is then de-interlaced into three seperate arrays (word count, data, timetag) and wrapped up in a cluster; this is where I see a problem. After I reformat the compressed data to its 'cluster of arrays', I have now doubled the amount of allocated memory when I really don't need the 'compressed data' array any longer. I was hoping somebody could offer me some help on how I can inline this conversion prior to storing the data such that only the final format of the data is left in memory, cutting my memory needs in half and thus doubling the amount of data I can gather. We are stuck with using LabVIEW 8.2 so I don't think we have any access to some fancy memory deallocation VI's that i've read about.
Here is the functional global used to store the "compressed data" that we get back everytime we do a DMA Read. This functional global has three methods: clear data, add data, and read data.
Here is the data conversion VI that converts the compressed data into its final form; ready to be TCP'd up to the host computer. This VI is passed the "CD array" from the "Read Data" case of the functional global above.
Thanks in advanced for your help.

SiegeX wrote:
Ravens Fan wrote:
Do you really need a cluster of 3 arrays as your end result data structure. Why not just go with the 3 arrays?
Rather than a cluster of 3 arrays, why not make it a 1-D array of the cluster?
The final output decision of a cluster of 3 arrays was made long ago (3 years IIRC). Immedaitly after the de-interlacing, this cluster isflattened to a string and then sent to the host PC via TCP/IP. Wrapping the arrays in a cluster made this very easy to do. At this point, this format is unfortunately set in stone for all intents and purposes as it would require a rewrite of some upstream API's in released code that expects it. To go down this path, I would have to prove that changing the output format would be the only way to fix this memory copy problem. I don't believe this is the case, is it?
Why not do all of your deinterlacing inside your functional global variable to create whatever final data structure makes the most sense. That way you only maintain one copy of the final large data structure rather than a copy of the original, a copy of the final, and copies of the intermediate data structures?
On the way home I was thinking about possible solutions and that is one I thought of and wrote down to test tomorrow. Just to be sure we are on the same page I was thinking on altering the "Read Data" case by tapping off the compressed data wire to the de-interlacing VI and then using a cluster indicator as output from the SubVI. I'm hoping this would prevent the double copy.
If not, my other idea was to de-interlace at the very beginning of the functional global, before it even enters the case structure. I would have to maintain 3 seperate arrays, each 1/3 the size of the current compressed data array and then in the "read data" case I would simply wrap up the 3 arrays in a cluster.
I hope one of these two ideas does the trick, otherwise I'm at a loss on how to do this and still keep a cluster of arrays as the output data structure.
That may help along with taking the next steps of putting the logic that converts and transmits the cluster in that state playing "Chase the dots" as you go.
Another approach is to convert the AE over to use the final cluster format and take advantage of the in-place operators (were they available in 8.2?, I think).
Have fun,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Need help with batch processing picture packages

Hi, I am having trouble batch processing picture packages is CS2. (Windows).
I have hundreds of images that need to be processed into picture packages and would love to find a speedier way to do this.
I know how to create an action. I know how to batch process from this action. I also know how to create picture packages, but I cannot get the final result I am after - please read on....
I have seperated all the images into their seperate folders for each style of picture package required.
I can create an action for the picture package required and then do a batch process on the particular folder, but this leaves all the picture packages open on the desktop - as when you chose the close and save in the batch process - this only closes and saves the original image - the picture package has been created as a new document and is on the desktop still open - named Picture Package 1, Picture Package 2 - etc etc.
I hope I am making some kind of sense here... (??!!)
What I would like to happen is that the picture package will be saved over the original file (or to a new folder) with the original file name of the original image or maybe even with an adjustment to file name (e.g - orignal file name sc1234.jpeg - new file name sc1234packA.jpeg)
So is this possible to do?? I'm thinking there must be a way.... i'm sure there are many group photographers out there who come across this everyday??
Otherwise I have to save each picture package manually to original file name (via searching though files to match the original image to the picture package....) Very time consuming.
Thanks for your help (in anticipation)...
Jodie

hmm - thanks for that - sounds like I will have to try and find some info and assistance regarding the scripting - it may be something I need to look into at a later time in the future....
At the moment though I will have to plod along with this method I guess!
Thanks for your assistance...
Jodie

Help with frozen process, retry delay and transaction rolled back

Hi all,


Is there a way to create a JPD that will be able to retry a specific logic for several times with delay in between and freeze on the last retry. Also, at the same time, not rollback any database commits?


I have tried several ways to approach this but did not work.


1) create a JPD with transaction block with start node = "freeze on failure". Set retry count and delay in the transaction block. The outcome is, the JPD freezes, retries correctly, unfreezed properly, but all DB transactions are rolled back


2) create a JPD without transaction block, and set start node with "freeze on failure", group the nodes that I would like to perform retry and in the exception path add in the retry count. Use timer in the exception path to introduct the delay. The outcome of this is: JPD freezes, retries correctly, unfreezed INCORRECTLY (when trying to unfreeze this process, it will start at the ontimeout method of the timer and does not start from the beginning of the jpd), DB transactions are commited correctly


Any help or suggestions would be much appreciated...

Thanks!


Carol

The issue may be due to the transaction timeout, verify the configured timeouts and the processing time of the process B.
Try increasing Sync Max Time Out and the other timeouts accordingly and test it.
Refer the below URL for the details of configuring the timeouts.
http://www.albinsblog.com/2011/11/oracle-soa-11g-configure-transaction_20.html
Regards
Albin I

Help with activation question

Hello, I was told today that there has been a change in the past week regarding the requirement that existing AT&T customers sign a new 2 year contract to activate an iPhone purchased from a third party (eg eBay). A salesman at a local AT&T store said that a month-to-month customer can continue this service and only has to add the $20 iPhone data charge to use the iPhone. I have been unable to confirm this from anyone else as yet. My impression has been that the phones are activated through iTunes completely apart from AT&T, and automatically require a 2 year contract. I don't know if the other local people denying this haven't gotten the word yet, or if this fellow is just plain wrong - can anyone +definitely confirm or refute+ this info?
My son is serious about purchasing an iPhone, but I really dislike cell phone contracts if I can avoid them.
Any help in clarifying would be greatly appreciated,
John

When you activate the iPhone in iTunes, the 2 year contract plans are the only options. If you do not pass the credit check, you are then provided with option of a GoPhone plan.

Need help with activating 3gs

I have just recieved a new 3gs and i do not know how to upgrade my iphone without it being set up yet. it is still in activation mode but i cannot finish this process because i apparently need to upgrade the phone for it to sync with my computer....? HELP

You need a sim card to activate the phone. If it doesn't have a sim card you cannot activate the phone.

Help with Active Directory Integration and kerberos

Hello,
Im encountering a bug preventing me to use Active Directory integration with kerberos :
Our domain name is CORP.DOMAIN.COM.
When we request the GC in this domain :
bash-3.00# nslookup -query=any gc.tcp.corp.domain.com
Server: 1.2.1.6
Address: 1.2.1.6#53
** server can't find gc.tcp.corp.domain.com: NXDOMAIN
there is no answer.
But when we request without corp, we find the servers :
bash-3.00# nslookup -query=any gc.tcp.domain.com | grep sis
gc.tcp.domain.com service = 0 100 3268 serveur02.corp.domain.com.
gc.tcp.domain.com service = 0 100 3268 serveur01.corp.domain.com.
bash-3.00#
Is-it possible to add the possibility to enter the domain name where reside the gc.tcp ?
Thank you.

Hello
the domain.com domain exist, but it's not our domain.
so, when I put domain.com, it search with no result (nothing appends).
our kdc.conf :
[kdcdefaults]
kdc_ports = 88,750
[realms]
CORP.DOMAIN.COM = {
profile = /etc/krb5/krb5.conf
database_name = /var/krb5/principal
admin_keytab = /etc/krb5/kadm5.keytab
acl_file = /etc/krb5/kadm5.acl
kadmind_port = 749
max_life = 8h 0m 0s
max_renewable_life = 7d 0h 0m 0s
default_principal_flags = +preauth
krb.conf
[libdefaults]
default_realm = CORP.DOMAIN.COM
default_checksum = rsa-md5
[realms]
CORP.DOMAIN.COM = {
kdc = dc01.corp.domain.com
kdc = dc02.corp.domain.com
[domain_realm]
.corp.domain.com = CORP.DOMAIN.COM
corp.domain.com = CORP.DOMAIN.COM
in every domain, I think the GC are in corp.domain.com. but in my company, it's in domain.com...
Thank you,

Need help with actively replacing text in SVG

I am new to Dreamweaver, Illustrator and SVG. Also, I do have a firm understanding of HTML but limited knowledge of Javascript and other languages. I am trying to create a website where the user is able to type in a form field (or something to that extent) and have the text in a displayed SVG be updated with the typed text. I've done extensive searching on the subject and come up with nothing that seems to work. Nor do I seem to be able to make it work.
I found a dead tutorial on the Adobe website which might help illustrate what I am trying to achieve:
http://www.adobe.com/svg/basics/text.html
ANY help would be GREATLY appreciated.
Thank you
Adam

Select the text. Copy to Clipboard. Open TextEdit. Paste. Resize its window appropriately. Choose Print off its File menu. Done.

Help with uploading process

why is th uploading process not working? i am trying to convert a pdf into a word doc

Hi dburtz2468,
We would like to help! What type of specific error messages are you receiving? Have you been able to convert any pdf's? What is the size of the document?
Looking forward to hearing back from you!
Regards, Stacy

Help With Activation Process

Similar Messages

Maybe you are looking for