Help with Add-On Adobe FLash
I have a Galagy Tab 3 Tablet NOT a phone. I downloaded the APK filefor android and installed it. When I open it it says I need an add on. When I go to Fire Fx add ons it is not that for me to eable it fr all sites like instructions are telling me to. I have the enable add on button checked. I just an't get the flash player to show up as an add on. I know it can be done because several people have said they have theris up and running. i really need this for one of my school programs that will only work with firefox and has to have flash.
Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash update and/or a malfunctioning browser plugin such as Real Player.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
* [[Flash Plugin - Keep it up to date and troubleshoot problems]]
* [[Flash 11.3 crashes]]
* [[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
* http://forums.adobe.com/thread/1018071?tstart=0
* http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please tell us if this helped!
Similar Messages
-
when i go to download adobe flah player, i click on the
install button. When it goes to the next page a gold bar comes up.
It either says IE has blocked the installing of ActiveX control or
do you wish to install ActiveX. when it comes to installing it, i
click install it, then the adobe flash install. after that the
screen says it was successfully installed, but i recieve no video
or ability to watch thing online.Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash update and/or a malfunctioning browser plugin such as Real Player.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
* [[Flash Plugin - Keep it up to date and troubleshoot problems]]
* [[Flash 11.3 crashes]]
* [[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
* http://forums.adobe.com/thread/1018071?tstart=0
* http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please tell us if this helped! -
Help with installation for adobe flash player
When I try to download the flash player it states: The installer will automatically continue when these conflicting applications are closed : Internet Explorer. What should I do? Thank you.
Hi, you may want to try the manual Uninstall/Install.
Download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer for IE- use the EXE Installer
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Close all browser windows, you only want to be looking at your Desktop.
Disable any messenger services, as yahoo, msn, etc in the system tray(area near the clock)
Be sure to use the Administrator Account.
Disable your Anti-Virus until Flash Player is Installed correctly
Run the Uninstaller and when finished, Reboot(restart) your computer.
Now check and make sure the Anti-Virus is still Disabled before running the Installer
Run the Installer for IE, and when finished, Reboot.
Then go to this test site and test each browser:
http://www.adobe.com/software/flash/about/
You should be able to see the Flash Player logo animate(spin) and the latest version displayed.
You may want to print these instructions to make it easier to follow. If you have any questions, let me know.
Thanks,
eidnolb -
Help With Buttons In Adobe Flash CS4
Hello, I am trying to create a satellite map where the user scrolls over each satellite button and displays an overlay and some information about the satellite.
I have got a test site where you can look at what I am trying to do. (home.exetel.com.au/jasdemo)
The first map has the satellites on the equator and the second one is the map with Overlays of where the satellites cover.
When the user scrolls over each Yellow spot on the equator I want the overlays and information to be different for each button.
At the moment I have a problem where you scroll over where the overlay sits and it still comes up which I don’t want only when you scroll over each yellow spot on the equator.
Each spot on the maps have been converted to buttons, they all have a mouse over keyframe so the name of the satellite can show up.
The First map on my test site works fine except no overlays for each spot and no information which I need.
Hope I make sense...
Please either email me or post me back if you need more information or if you have a solution to this..
ThanksIm not sure what you mean sorry ill link my .fla file and you can see what I have done.
Link to file
http://www.mediafire.com/?z3ryzt0za0z
Justin -
This website wants to run the Following add-on: 'Adobe Flash Player'...
Alright, So i'm getting this information bar to pop up everytime i enter a new site that has adobe content.
This website wants to run the Following add-on: 'Adobe Flash Player' from 'Adobe System Incorporation'. If you trust the website and the following add-on and want to allow it to run, Click Here...
Here's an example picture on cartoonnetwork.com
(Click to enlarge)
Now, If i hit allow it will allow it but it pops up on almost every new website i go to and i have to allow it each and everytime.
Yet my Adobe version is 10,0,32,18 as shown in the picture below.
I've uninstalled and reinstalled overwritten and uninstalled Internet Explorer 8 with no luck of getting rid of this annoying problem. So if anyone has a slight idea of how to fix this problem i'll try anything because i hate it when something isn't working correctly. (Yes, I've googled around for a good 2 hours with no luck)Alright guy's It always happens. Over 90% of the time it's just a matter of time before i fix my own problems. I solved my problem and now it works perfectly fine.
I'm gonna say how i fixed it so who ever finds this page on google can see how i did it. I uninstalled Adobe Flash Player using the uninstaller from adobe http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player.exe after i did that i went to my system32 folder and delete my adobe folder which still had files left over in it (Deleted the whole macromed folder) C:\WINDOWS\system32\Macromed\Flash
Note, You need to exit any browser you have up (IE,Firefox,ect) or else you will not be able to delete it and it'll say access denied. After deleting that i installed Adobe Flash Player with a .exe i downloaded from Adobe and it worked perfect! No more annoying message
Side note, I'm use XP so the marcomed folder might possible be somewhere else if you are useing Vista or Windows 7. -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
Can you help me to install adobe flash media
can u help me to install adobe flash on my computer?
Are you seeking help for installing Adobe Flash Player or Flash Media Server. Your post is little confusing but i would assume since you posted here its for FMS.
You can find instructions here:http://help.adobe.com/en_US/flashmediaserver/install/index.html -
I need help getting rid of Adobe Flash Player
First - cor-el, thanks for your suggestion (reply form won't let me enter a reply).
Now, my problem: I use very slow dial-up. I cannot have a Flash Player on my computer or nothing else opens. When I downloaded Adobe Reader 8, somehow Adobe Flash Player 10 downloaded with it. It is messing up my Internet use. When I tried to remove it in Add or Remove Programs, and with Adobe's downloadable remover, a notice opens saying it will remove the Flash Player when Windows Messenger is closed. But Windows Messenger isn't open. I never use it. Adobe states “Due to recent enhancements to the Adobe Flash Player installers, you can now remove the player only by using the Adobe Flash Player uninstaller.” Surely there must be a way to find the components and delete each one. Can anyone tell me how to do that? Or maybe suggest something else besides reinstalling the operating system again (I did it two weeks ago -- took all day with help from Dell techs on the phone) and living without Adobe Reader?
== Operating system ==
WinXPFirst, a quick workaround.
In Firefox,
Tools> Addons
Plugin Tab
Locate Flash Player on the list and press disable.
Restart Firefox.
That should at least prevent it from running in Firefox and slowing down browsing. I think. -
I have cleared the "approved sites" for the Adobe Flash add-on in IE because I want to approve each site individually. The problem I am having is that EVERY PAGE I visit triggers the subject alert whether or not the page actually contains flash content. Anyone else experiencing this and more importantly, is there any way to solve this so the alert only pop-up for pages using flash content?
Disable AxtiveX filtering. http://forums.adobe.com/thread/867968
If that doesn't help, then use another browsewr besides Internet Exploder.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work trouble free where IE won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. -
Help with editing buttons in flash
I have dreamweaver 8 and flash 8 and i need to add content to
the nav bar that was made in flash 8....when i do edit and export
back to dreamweaver it doesn't acknowledge the change even when i
refresh....or close the program and manually take out the
files....what am i doing wrong???
undesirable#1I'm totally confused - i think it is your terminology - when
you say things like "window" - it is
very hard to tell what you mean. "Window" can refer to so
many different things. Then you say things
that popup at first glance can't be seen - even more
confusing. When you say "when I open the window
more..." what "window" are we talking about? Are you
previewing in a browser? Or is this inside the
DW IDE? Or the Flash IDE?
It's probably a very simple solution but I can't figure out
what you are physically looking at, what
it looks like now, and what it should look like based on your
workflow.
sorry - trying to help.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
howtocheatinflash.com
undesirablenumberone wrote:
> just to stating the obvious, ....i'm a total novice.
>
> i'm using the same file from dreamweaver, just renaming
it....then i change
> the placeholder to correspond with the new file...then i
save it and
> refresh....I notice that when i preview it in flash that
as a flash item, when
> the window with the nav bar in it pops up at first
glance you don't see it, but
> if i open the window more then the text is there ...but
still doesn't show up
> in dreamweaver.......
> -
Problem with installation of Adobe Flash Player on mac
Hi, i have a macintosh with OsX Yosemite 10.10.2 and i can't update the software to te last version. The download always stop at 20-30%. It's not a problem of my internet connection. I tried to uninstall e reinstall flash player, but i have the same problem, with the difference that now i neither have the software... What can i do? Thank you!
Hi,
Ok. So I found this and it worked:
1. Re: Flash download freezes at 25%. What will help?
Jeromie Clark Mar 18, 2015 5:00 PM (in response to Geri J)
Please use the offline installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
Download the install package from this link. Double-click to open it from your downloads folder; when you see the red "install" folder, right-click it and select "Show Package Contents"; click on the "Contents" folder; then click on the "Resources" folder; then double-click on the "Adobe Flash Player.pkg" file. The installation will start. It worked for me.... FINALLY!! I hope it also works for you. -
I need help with shooting in my flash game for University
Hi there
Ive tried to make my tank in my game shoot, all the code that is there works but when i push space to shoot which is my shooting key it does not shoot I really need help with this and I would appriciate anyone that could help
listed below should be the correct code
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
//making it so the user can't shoot for a bit
shootAllow = false;
//declaring a variable to be a new Bullet
var newBullet:Bullet = new Bullet();
//changing the bullet's coordinates
newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
newBullet.x = tank_mc.x;
//then we add the bullet to stage
addChild(newBullet);
listed below is my entire code
import flash.display.MovieClip;
//declare varibles to create mines
//how much time before allowed to shoot again
var cTime:int = 0;
//the time it has to reach in order to be allowed to shoot (in frames)
var cLimit:int = 12;
//whether or not the user is allowed to shoot
var shootAllow:Boolean = true;
var minesInGame:uint;
var mineMaker:Timer;
var cursor:MovieClip;
var index:int=0;
var tankMine_mc:MovieClip;
var antiTankmine_mc:MovieClip;
var maxHP:int = 100;
var currentHP:int = maxHP;
var percentHP:Number = currentHP / maxHP;
function initialiseMine():void
minesInGame = 15;
//create a timer fires every second
mineMaker = new Timer(6000, minesInGame);
//tell timer to listen for Timer event
mineMaker.addEventListener(TimerEvent.TIMER, createMine);
//start the timer
mineMaker.start();
function createMine(event:TimerEvent):void
//var tankMine_mc:MovieClip;
//create a new instance of tankMine
tankMine_mc = new Mine();
//set the x and y axis
tankMine_mc.y = 513;
tankMine_mc.x = 1080;
// adds mines to stage
addChild(tankMine_mc);
tankMine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal(evt:Event):void{
evt.target.x -= Math.random()*5;
if (evt.target.x >= stage.stageWidth)
evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
removeChild(DisplayObject(evt.target));
initialiseMine();
//declare varibles to create mines
var atmInGame:uint;
var atmMaker:Timer;
function initialiseAtm():void
atmInGame = 15;
//create a timer fires every second
atmMaker = new Timer(8000, minesInGame);
//tell timer to listen for Timer event
atmMaker.addEventListener(TimerEvent.TIMER, createAtm);
//start the timer
atmMaker.start();
function createAtm(event:TimerEvent):void
//var antiTankmine_mc
//create a new instance of tankMine
antiTankmine_mc = new Atm();
//set the x and y axis
antiTankmine_mc.y = 473;
antiTankmine_mc.x = 1080;
// adds mines to stage
addChild(antiTankmine_mc);
antiTankmine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal_2(evt:Event):void{
evt.target.x -= Math.random()*10;
if (evt.target.x >= stage.stageWidth)
evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
removeChild(DisplayObject(evt.target));
initialiseAtm();
function moveForward():void{
bg_mc.x -=10;
function moveBackward():void{
bg_mc.x +=10;
var tank_mc:Tank;
// create a new Tank and put it into the variable
// tank_mc
tank_mc= new Tank;
// set the location ( x and y) of tank_mc
tank_mc.x=0;
tank_mc.y=375;
// show the tank_mc on the stage.
addChild(tank_mc);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onMovementKeys);
//creates the movement
function onMovementKeys(evt:KeyboardEvent):void
//makes the tank move by 10 pixels right
if (evt.keyCode==Keyboard.D)
tank_mc.x+=5;
//makes the tank move by 10 pixels left
if (evt.keyCode==Keyboard.A)
tank_mc.x-=5
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
//making it so the user can't shoot for a bit
shootAllow = false;
//declaring a variable to be a new Bullet
var newBullet:Bullet = new Bullet();
//changing the bullet's coordinates
newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
newBullet.x = tank_mc.x;
//then we add the bullet to stage
addChild(newBullet);
if (tank_mc.hitTestObject(antiTankmine_mc))
//tank_mc.gotoAndPlay("hit");
currentHP -= 10;
// remove anti tank mine
removeChild(antiTankmine_mc);
if (tank_mc.hitTestObject(tankMine_mc))
//tank_mc.gotoAndPlay("hit");
currentHP -= 10;
// remove anti tank mine
removeChild(tankMine_mc);
//var maxHP:int = 100;
//var currentHP:int = maxHP;
//var percentHP:Number = currentHP / maxHP;
//Incrementing the cTime
//checking if cTime has reached the limit yet
if(cTime < cLimit){
cTime ++;
} else {
//if it has, then allow the user to shoot
shootAllow = true;
//and reset cTime
cTime = 0;
function updateHealthBar():void
percentHP = currentHP / maxHP;
healthBar.barColor.scaleX = percentHP;
if(currentHP <= 0)
currentHP = 0;
trace("Game Over");
updateHealthBar();USe the trace function to analyze what happens and what fails to happen in the code you showed. trace the conditional values to see if they are set up to allow a shot when you press the key
-
I need to make a hyper link to jpegs, and while this is easy
enough, the images are already in a PDF doc. I would love to not
have to go page by page and save them out as jpegs. Is it possible
to link a hyper link to a specific page in a specific PDF ? And if
not a hyper link is there some other way of clicking on some text
or something and telling it to go to page 2 of Test.pdf ?
-ThanksI'm totally confused - i think it is your terminology - when
you say things like "window" - it is
very hard to tell what you mean. "Window" can refer to so
many different things. Then you say things
that popup at first glance can't be seen - even more
confusing. When you say "when I open the window
more..." what "window" are we talking about? Are you
previewing in a browser? Or is this inside the
DW IDE? Or the Flash IDE?
It's probably a very simple solution but I can't figure out
what you are physically looking at, what
it looks like now, and what it should look like based on your
workflow.
sorry - trying to help.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
howtocheatinflash.com
undesirablenumberone wrote:
> just to stating the obvious, ....i'm a total novice.
>
> i'm using the same file from dreamweaver, just renaming
it....then i change
> the placeholder to correspond with the new file...then i
save it and
> refresh....I notice that when i preview it in flash that
as a flash item, when
> the window with the nav bar in it pops up at first
glance you don't see it, but
> if i open the window more then the text is there ...but
still doesn't show up
> in dreamweaver.......
> -
Issue with installing updated adobe flash player to my macbook pro
I have been attempting to update the adobe flash player on my macbook pro for some time now with no success. The installation gets to over 90% complete before a message popping up saying to close safari--which, but this doesn't help. I have read several other similar issues but am yet to find a suggestion that works.
any ideas?
thank you
Peta1. System Preferences > Security
Select App store & identified developers
2. Uninstall Adobe Flash Player:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
3. Reinstall Adobe Flash Player.
http://get.adobe.com/flashplayer/
4. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it. -
Help with editing a template flash file..
FIRST OFF..please don't shoot the noobee..I know some folks
don't like the templates and I appreciate that.
I have done some reading but not a whole lot about Flash. I
certainly don't want to BUILD a flash (not yet), but want to edit
one that is included in a template. I only want to edit the header
that drops down. It says The Web STudio. I, for example, want it to
say Marks Studio.
Ok..the temp comes with Flash/non flash.
I open w/flash and have a 3 folders: flash, psd and html.
-flash folder has Images, fla doc and one flash html file
-PSD folder has 3 psd files
-html folder has flash folder, images folder, css file and
one single index.html file.
I opened the flash folder and found the image.jpg I wanted to
change to Marks studio.
I opend the PSD and found the slice that is the same as that,
then edited it like I want it in PSD, then saved to replace the old
image. top1. jpg
Still, it is the same ole one that came with the temp.
as I said, please don't shoot the noobe. I just wanna edit
the flash file.
Thanks for any help.
MarkYou'd need Flash to edit the FLA file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"snipingkid" <[email protected]> wrote in
message
news:enev5r$p8l$[email protected]..
> Hey guys,
>
> I need some help with editing a flash template, I have
the .swf, .fla, and
> .html file of this thing, I would like however to edit
something on it....
> Ive
> tried everything, I have access to photoshop and
dreamweaver 8... Im not
> any
> good at it but with decent help I could get something
done. What I would
> like
> to edit is just text that flies in.... I would like to
edit the text, how
> do I
> do it.... Thanksj
>
Maybe you are looking for
-
Hi, I got a problem with registration of a sale order with a BAPI : it set automatically a delivery block , and this not happen when using VA01. After create the order, for this one will be insert a technical object (serial number) and made some othe
-
Hi guys! This is my first discussion and I'm not exactly sure what kind of details to put, so I'll just be as detailed as possible. I hope I don't confuse anyone. I really REALLY need help! I've got a 16 GB iPhone 4S and always find myself filling up
-
Skype account always showing online
Hello, I have skype installed on my Windows 8 system and even when I logout from my account and sign in with my friend's account I am still showing online. How do I know from which devices or locations I am signed in. I have a smart phone but I am no
-
Very weird internet problem :I
Hi everyone, I am calling for all the experts because I have spent my last two days resolving this problem without any success. I moved to a new location Saturday where I set up my Airport Extreme to provide a wifi network. The extreme is connected t
-
Having repeated intel graphics accelerator driver crashes - screen goes black and it recovers - get little error message screen as what happened. Happens frequently. I have done driver scans and everything is up to date. Did not have this problem wit