Help with adding a date in ADDT

Not sure what's going on here, but its probably something simple, and me missing something obvious...
Basically I have a form to add a record to a database table.
I have two date fields in the table, of the type, Date.
This is my code for adding the record :
// Add columns
$ins_clients->setTable("clients");
$ins_clients->addColumn("name", "STRING_TYPE", "POST", "name");
$ins_clients->addColumn("company", "STRING_TYPE", "POST", "company");
$ins_clients->addColumn("website", "STRING_TYPE", "POST", "website");
$ins_clients->addColumn("tel", "STRING_TYPE", "POST", "tel");
$ins_clients->addColumn("mobile", "STRING_TYPE", "POST", "mobile");
$ins_clients->addColumn("email", "STRING_TYPE", "POST", "email");
$ins_clients->addColumn("enquirydate", "DATE_TYPE", "POST", "enquirydate");
$ins_clients->addColumn("business", "STRING_TYPE", "POST", "business");
$ins_clients->addColumn("future", "STRING_TYPE", "POST", "future");
$ins_clients->addColumn("potential", "STRING_TYPE", "POST", "potential");
$ins_clients->addColumn("callback", "DATE_TYPE", "POST", "callback");
$ins_clients->addColumn("notes", "STRING_TYPE", "POST", "notes");
$ins_clients->setPrimaryKey("ID", "NUMERIC_TYPE");
And these are the form fields for the dates :
<input type="text" name="enquirydate" id="enquirydate" value="<?php echo KT_formatDate($row_rsclients['enquirydate']); ?>" size="32" />
<input type="text" name="callback" id="callback" value="<?php echo KT_formatDate($row_rsclients['callback']); ?>" size="32" />
All of which seems about right.
But even when I enter dates in the format 2010-09-23, all that's being written back to the database is 0000-00-00.
Any ideas where I'm going wrong?
Thanks.

Its OK - I just changed DATE_TYPE to STRING_TYPE and its working now.

Similar Messages

  • Help with adding a hyperlink to a button?

    We have a simple little site we built in Catalyst and everything works great. The only problem is that we cannot figure out how to add a hyperlink to one of the buttons in the animation. We simply want to be able to click on the button and go to another site (the client's Facebook page specifically). Can anyone provide some insight? Thanks!

    The message you sent requires that you verify that you
    are a real live human being and not a spam source.
    To complete this verification, simply reply to this message and leave
    the subject line intact.
    The headers of the message sent from your address are shown below:
    From [email protected] Tue Nov 03 19:08:07 2009
    Received: from mail.sgaur.hosted.jivesoftware.com (209.46.39.252:45105)
    by host.pdgcreative.com with esmtp (Exim 4.69)
    (envelope-from <[email protected]>)
    id 1N5TPy-0001Sp-J1
    for [email protected]; Tue, 03 Nov 2009 19:08:07 -0500
    Received: from sgaurwa43p (unknown 10.137.24.44)
         by mail.sgaur.hosted.jivesoftware.com (Postfix) with ESMTP id 946C5E3018D
         for <[email protected]>; Tue,  3 Nov 2009 17:08:03 -0700 (MST)
    Date: Tue, 03 Nov 2009 17:07:49 -0700
    From: Tvoliter <[email protected]>
    Reply-To: [email protected]
    To: Matthew Pendergraff <[email protected]>
    Message-ID: <299830586.358941257293283616.JavaMail.jive@sgaurwa43p>
    Subject: Help with adding a hyperlink to a button?
    MIME-Version: 1.0
    Content-Type: multipart/mixed;
         boundary="----=_Part_36702_1132901390.1257293269030"
    Content-Disposition: inline
    X-Spam-Status: No, score=-3.4
    X-Spam-Score: -33
    X-Spam-Bar: ---
    X-Spam-Flag: NO

  • Help with adding image onclick

    Hey everyone,
    I am making a simple game in AS3 and need help with adding an image once they have click on something.
    On the left of the screen are sentences and on the right an image of a form. When they click each sentence on the left, writing appears on the form. Its very simple. With this said, what I would like to do is once the user click one of the sentences on the left, I would like a checkmark image to appear over the sentence so they know they have already clicked on it.
    How would I go about adding this to my code?
    var fields:Array = new Array();
    one_btn.addEventListener(MouseEvent.CLICK, onClick1a);
    one_btn.buttonMode = true;
    function onClick1a(event:MouseEvent):void
        fields.push(new one_form());
        fields[fields.length-1].x = 141;
        fields[fields.length-1].y = -85;
        this.addChild(fields[fields.length-1]);   
        one_btn.removeEventListener(MouseEvent.CLICK, onClick1a);
        one_btn.buttonMode = false;
        //gotoAndStop("one")
    two_btn.addEventListener(MouseEvent.CLICK, onClick2a);
    two_btn.buttonMode = true;
    function onClick2a(event:MouseEvent):void
        fields.push(new two_form());
        fields[fields.length-1].x = 343.25;
        fields[fields.length-1].y = -85;
        this.addChild(fields[fields.length-1]);
        two_btn.removeEventListener(MouseEvent.CLICK, onClick2a);
        two_btn.buttonMode = false;
        //gotoAndStop("two")

    I don't know where you're positioning the button that should enable/disable the checkbox but for "one_btn" let's just say it's at position: x=100, y=200. Say you'd want the checkbox to be to the left of it, so the checkbox would be displayed at: x=50, y=200. Also say you have a checkbox graphic in your library, exported for actionscript with the name "CheckBoxGraphic".
    Using your code with some sprinkles:
    // I'd turn this into a sprite but we'll use the default, MovieClip
    var _checkBox:MovieClip = new CheckBoxGraphic();
    // add to display list but hide
    _checkBox.visible = false;
    // just for optimization
    _checkBox.mouseEnabled = false;
    _checkBox.cacheAsBitmap = true;
    // adding it early so make sure the forms loaded don't overlap the
    // checkbox or it will cover it, otherwise swapping of depths is needed
    addChild(_checkBox);
    // I'll use a flag (a reference for this) to know what button is currently pushed
    var _currentButton:Object;
    one_btn.addEventListener(MouseEvent.CLICK, onClick1a);
    one_btn.buttonMode = true;
    function onClick1a(event:MouseEvent):void
         // Check if this button is currently the pressed button
         if (_currentButton == one_btn)
              // disable checkbox, remove form
              _checkBox.visible = false;
              // form should be last added to fields array, remove
              removeChild(fields[fields.length - 1]);
              fields.pop();
              // clear any reference to this button
              _currentButton = null;
         else
              // enable checkbox
              _checkBox.visible = true;
              _checkBox.x = 50;
              _checkBox.y = 200;
              // add form
              fields.push(new one_form());
              fields[fields.length-1].x = 141;
              fields[fields.length-1].y = -85;
              this.addChild(fields[fields.length-1]);
              // save this button as last clicked
              _currentButton = one_btn;
         // not sure what this is
        //gotoAndStop("one")
    I'd also centralize all the click handlers into a single handler and use the buttons name to branch on what to do, but that's a different discussion. Just see if this makes sense to you.
    The jist is a graphic of a checkbox that is a MovieClip symbol in your library exported to actionscript with the class name CheckBoxGraphic() is created and added to the display list.
    I made a variable that points itself to the last clicked button, when the "on" state is desired. If I detect the last clicked button was this button, I remove the form I added and the checkbox. If the last clicked button is not this button, I enable and position the checkbox as well as add the form.
    What is left to do is handle the sitation where multiple buttons are on the screen. When a new button is pushed it should remove anything the previous button added. This code simply demonstrates clicking the same button multiple times to toggle it "on and off".

  • Need help with adding emoji to my hubby's phone don't see it when I click on the keyboard tab

    I need help with adding emoji to my hubby's iPhone when I go to settings then the keyboard tab it's not there

    I did that bad it's not there and doesn't give me to option to click on it

  • Help with XML, display data on swipe/click

    Hello.
    I am trying to create a moibile app that displays XML data. It's basically a phone book. I want the data to change when swiped. I can get the data in just fine. I can get it to display fine. I am not seeing the correct image first, however. I think it's a problem with my imagenum variable.
    Then, I want to change what is displayed when the user clicks/swipes on the screen. How do I do that?
    stop();
    var nameArray:Array = new Array();
    var countryArray:Array = new Array();
    var portraitArray:Array = new Array();
    var flagArray:Array = new Array();
    var jobtitleArray:Array = new Array();
    var imageNum:Number=0;
    var totalImages:Number;
    //Load XML
    var XMLURLLoader:URLLoader = new URLLoader();
    XMLURLLoader.load(new URLRequest("recbook.xml"));
    XMLURLLoader.addEventListener(Event.COMPLETE, processXML);
    function processXML(event:Event):void {
    var theXMLData:XML = new XML(XMLURLLoader.data);
    totalImages=theXMLData.name.length();
    for (var i:Number =0; i < totalImages; i++){
      //push xml data into the arrays
      nameArray.push(theXMLData.name[i]);
      countryArray.push(theXMLData.country[i]);
      portraitArray.push(theXMLData.portrait[i]);
      flagArray.push(theXMLData.flag[i]);
      jobtitleArray.push(theXMLData.jobtitle[i]);
    //data is processed
    loadData();
    function loadData():void {
    var thisPortrait:String = portraitArray[imageNum];
    var thisCountry:String = countryArray[imageNum];
    var thisName:String = nameArray[imageNum];
    var thisJobtitle:String = jobtitleArray[imageNum];
    var thisFlag:String = flagArray[imageNum];
    var dataLoader:Loader = new Loader();
    dataLoader.load(new URLRequest(portraitArray[imageNum]));
    dataLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, dataLoaded);
    function dataLoaded(event:Event):void {
      //I want to start with image 0 (img1.jpg) and cycle through with a mouse click (finger swipe on iOS)
      stage.addEventListener(MouseEvent.CLICK, loadMainImage1);
      function loadMainImage1(event:MouseEvent):void {
       portraitUILoader.source=thisPortrait;
       flagUILoader.source=thisFlag;
       selectedName.text=thisName;
       selectedCountry.text=thisCountry;
       selectedJobtitle.text=thisJobtitle;
    //add to imageNum (1);
    imageNum++;
    if (imageNum < totalImages) {//stopping at img2
      trace("imageNum " + imageNum);
      trace("image name (thisPortrait) " + thisPortrait);//losing image 4 somewhere
      loadData();
      trace("Total Images " + totalImages);
    //click to move past the home screenI'd like to ditch this. don't know how.
    homeScreen_mc.addEventListener(MouseEvent.CLICK, goNext);
    function goNext(event:MouseEvent):void
    nextFrame();
    */here's the output:
    imageNum 1
    image name (thisPortrait) images/img1.jpg
    imageNum 2
    image name (thisPortrait) images/img2.jpg
    imageNum 3
    image name (thisPortrait) images/img3.jpg
    Total Images 4
    Total Images 4
    Total Images 4
    Total Images 4
    It starts the display on image 1 (the second in the series img2.jpg)*/

    Thank you.
    That helped. I get the correct images in the output, but not in the display. I also get the following error. Any chance you could help with that?
    new output after moving the increment:
    imageNum 0
    image name (thisPortrait) images/img1.jpg
    imageNum 1
    image name (thisPortrait) images/img2.jpg
    imageNum 2
    image name (thisPortrait) images/img3.jpg
    imageNum 3
    image name (thisPortrait) images/img4.jpg
    TypeError: Error #2007: Parameter url must be non-null.
    at flash.display::Loader/_load()
    at flash.display::Loader/load()
    at iOS_fla::MainTimeline/loadData()
    at iOS_fla::MainTimeline/loadData()
    at iOS_fla::MainTimeline/loadData()
    at iOS_fla::MainTimeline/loadData()
    at iOS_fla::MainTimeline/loadData()
    at iOS_fla::MainTimeline/processXML()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()

  • [CS3 JS] Help with adding textMacros

    I can get a textMacro added with the following.
    app.textMacros.add("myName", "this is some text")
    What I am having trouble with is having the Remember Text Attributes be grabed or set to true.
    Any one know what the syntax is for setting this during the add()
    also how do you insert a macro via a javascript?
    Mahalo
    David

    These forums are pointless. Adobe must believe that other users will cut the mustard. Absolutely a waste of effort for everyone. Adobe should PAY at least a junior developer involved in the projects to monitor and help with these posts. FLEX rules yeah and thousands more do scripting than develop plug ins...
    Come on Adobe, step up your better than this. Customer Service can be free to the customers ... we are not talking about GET IT ALL FREE, talking about buy it and create a community and support it, but then again LAYERS and INDESIGN SECRETS have people who actually want to help users rather than rabbit hole everything.
    Please join hands and SING...

  • Help With Adding Back Up of Songs & Lists on Re-Installed iTunes v 7.0.2

    I have a portable hard drive with a back up of my 10,000 songs. I have to get my Gateway PC laptop serviced as it continues to crash, and so I will need to re-install iTunes v 7.0.2 and then add back my songs from the portable hard drive.
    I need help with a couple of questions:
    1) Is there a quicker way to add the songs back on to iTunes rather than adding individual files (for songs) and individual folders (for albums)?
    2) I have several song lists (some used to make CD's). How can these lists be backed up as well so that I do not have to re-create these lists?
    Any advice very much appreciated.

    There is a good article on backup here:
    http://discussions.apple.com/thread.jspa?messageID=1522195&#1522195
    If all your music is in the iTunes Music folder and you have room, just copy the iTunes folder to your external drive.
    This will include both your music files and the iTunes library files.
    If you music is stored in other places, you need to backup those too. When you restore you need to ensure the full path name is the same.
    Life is also much easier if you can keep exactly the same account name if you reinsall windows as the account name is part of the path to My Documents.

  • Help with excel grouped data and sorting to keep data intact

    I have a master spreadsheet with lots of data. I am trying to grouped the data based on physical address/city, add the values and once done sort it by valuation based on descending order by valuation but my data keep messing up.
    So in Row 1/col A: Address 1; Col B City: XXX; Col C: Valuation $$$
    Row 2/col A: Address 1; Col B City: XXX; Col C: Vauation $$$
    Row 3/col A: Address 2; COl B City: YYY; Col C:  Valuation $$$
    SO I sort by city and in ROw 1/2 same city with same address, I grouped it.  THen I created a new row below Row 3 and add up the grouped data (i.e. ROw 1 and 2).  I go through the entire list to finalize the grouped locations.  
    But when I am done and I sort by Valuation, all my data messed up coz I created a new row with addition of grouped location valuation and the formula gets messed up.
    Any one with ideas please help.  My deadline for this project is just a week away and I am freaking out.
    THanks in advance.

    it seems upload a sample is more clearly about the required.
    KR

  • Archive applet. Help with adding files to archive, then show.

    I need help with this applet: http://pastebin.com/589064
    The user is supposed to add, remove and open archives with text in it.
    My problem is now the highlited area in the code (the lines with the @@'s).
    This button should list all files i have added to the archive, however when i press the button, i only get a numberlisting. eg, if i have added 4 files to the archive I get: 0123
    However I want the Joptionpane to show a listing of the files in the archive.
    When I press "open" i can choose a file, press add, then open a new file, press add, and then when i click show archive, the filenames of the two files i added, should list through a Joptionpane..as you can see, i've tried, but i'm very unfamiliar with this.

    OK..i've done it
    check out http://pastebin.com/589268
    however, now i'd like to change the code, so that if i try to add to files with the same filename, the applet should show an error message..
    How do i do that, please? :-)

  • Little help with FORM POST data not in UTF-8 (JSP/servlet)

    Hello,
    I am trying to update a MySQL database record with UTF-8 characters with my JSP application.
    1) I have MySQL correctly configured to handle UTF8 and have tested insert/update/select with UTF8 characters
    2) I have an "editRecord.jsp" page. At the top of the page, I specify:
    <% request.setCharacterEncoding("UTF-8"); %>
    3) I have an input form which is specified in that page which follows:
    <form action="<c:url value="/updateRecord.jsp"/>"
    name="updatetForm" method="post"
    ACCEPT-CHARSET="UTF-8"
    enctype="multipart/form-data">
    4) I have a servlet filter that takes every HttpServletRequest and modifies that object in
    doFilter(...){
    request.setCharacterEncoding("UTF-8");
    chain.doFilter(...)
    5) In updateRecord.jsp, I fill a JavaBean with the form data. Here's an example of the form input:
    name = Company
    Comments=Here's some unicode text: "&#1610;&#1606;&#1610; &#1573;&#1606; &#1576;&#1604;&#1575;&#1583;&#1607; &#1605;
    6) When I put a breakpoint and inspect the contents of the UpdateBean after posting the form, running the request through the filter, I see
    I see:
    name = Company
    Comments=Here's some unicode text: &#132;������...."
    Where could I possibly be missing something to force UTF8 encoding of these values?

    If you have to use the following code to fix the encoding:
    String value = new String(item.getString().getBytes("ISO-8859-1"), "UTF-8"); ...
    then you are just putting a band aid on something that is broken somewhere else (since this code creates a byte array in 8859-1 and then creates a string from that byte array, but assuming that the array is encoded in UTF-8). That will only work if the string you start out with is mangled.
    In many cases such a fix will actually "work" (in the sense that you may end up with something that is correctly encoded in the end), but you run the risk of breaking if the source of the original corruption is removed.

  • Need help with adding images option

    I was using the add images option a few weeks ago just fine.. using my tablet and uploading the images via usb. then all of the sudden it stopped working.
    please help with this issue.
    Danny

    A few questions. What result are you experiencing? Did PS Touch crash? Have you tried to force quit-and restart PS Touch? -Guido

  • On Hand QTY help with adding Lot and Expiration Date

    I need assistance with including the Lot Number and Expiration Date to the query below, can someone please help me with this.
    select mp.organization_code org_code
    , msi.segment1 item_code
    ,msi.description
    ,SUM (mmt.transaction_quantity) quantity
    ,mmt.subinventory_code
    ,msi.primary_uom_code  UOM
    from mtl_system_items_b msi
    , mtl_material_transactions mmt
    , mtl_parameters mp
    where msi.inventory_item_id = mmt.inventory_item_id
    and msi.organization_id = mmt.organization_id
    and mp.organization_id = mmt.organization_id
    and mp.organization_id = msi.organization_id
    and msi.organization_id = XX
    and mmt.subinventory_code = 'XXXX'
    group by msi.segment1
    ,msi.description
    ,mmt.subinventory_code
    ,msi.primary_uom_code
    ,mp.organization_code
    having SUM (mmt.transaction_quantity) >= 0
    order by 2;

    GKaiseril,
    Yes,
    I'm aware of JS API Reference disclaimer on page 277. I am executing it from folder level script. The script hasn't changed in 2 years and worked fine in Adobe versions 7.0 through 9.3.2. It stopped working when Adobe released version 9.3.3.
    I can make the script do nothing but
    this.closeDoc(true);
    so that there is no reference to the document after it closes. I still get a fatal error:
    Expected a dict Object
    Followed by Microsoft Error report
    Followed by:
    Runtime error!
    Program: C:\Program Files\Adobe\Reader9.0\Reader\Acrord32.exe
    R6025
    -pure virtual function call
    Then Reader closes.
    All our users have rolled back to Reader 9.3.2 and the problem went away.
    I don't believe it is related to the location of the method ...rather something Adobe changed between version 9.3.2 and 9.3.3.
    Cheers!
    Doug

  • Can anyone help with adding microsoft pubcenter data?

    I have a pubcenter account. I have also created an adzone. It gives some different values to display the ads. When I open the pibcenter info tab in app studio it is not clear where to enter those values because some of the names don't match. Please help

    Have a look at these ones:
    Enabling Ads
    Adding AdDuplex ads to your App Studio App
    Happy Coding!

  • Need help with adding a Key flex field to a seeded OAF page

    We have a seeded OAF page on which we already have Account Key Flex Field.
    Properties of this flex field are:
    The ApplShortName - SQLGL
    Name - GL#
    Type - Key
    As per the client requirement, in the KFF screen, we have disabled the seeded structure for Accounting Flexfield and created a custom structure.
    Our custom structure for the KFF is displayed correctly on the OAF page.
    But now the requirement is to add a new KFF on the OAF page which is duplicate of the existing KFF, along with the existing KFF field; the structure and segments are same. Only difference being the display name of the existing KFF field is Account; the new one needs to be Tax structure.
    Using personalization we added a new flex item and added the properties same as the existing KFF.
    ApplShortName - SQLGL
    Name - GL#
    Type - Key
    But the page is giving following error:
    The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = SQLGL, Code = GL# and Structure number =
    We tried options like compiling the flexfield definition, but the error persists.
    Any help in this regard is highly appreciated.
    Regards,
    Kiranmayi.

    Hi,
    Please check whether your key flex structure is frozen or not. If now please freeze it and re compile and try.
    This may helps too
    error while developing KFF in oaf
    Thanks
    Bharat
    Edited by: Bharat on May 10, 2013 4:51 AM

  • I need help with adding fire to an existing picture in elements 8

    I'm a painting contractor and I'm trying to create a new picture for my buisness cards and tee shirts. What I want to do is put flames coming from a brush and work pot that I'm holding in my hands. I've looked everywhere on line, but I can't find exactly what I want. I'm hoping that someone in this forum will be able to help me. Thanks.

    Okay, I have been playing with for a few days. Warning, this is going to be loooong. I do this differently in Photoshop but couldn't get it to work with the elements workset as it doesn't have the curves tool that Photoshop has so I had to find an alternate method to pump up the flames. Luckily, I ran into a video that used a method other than curves to get me on track. I assumed you want realistic flames...so I was pushing for how real could I make flames using paint and blend mode operations.
    Edit: I should let you know that you can try to extract flames from other photos and composite them into your photo. First, need a good fire image. It works best if you can find a fire with a black background. Screen blend mode will drop out black. Try working with two copies of the image. Turn off the topmost copy of the flames. Leave the bottom flames in Normal blend mode. Mask or erase the outer edges of the flames with a soft brush so that only the interior of the flames are visible. Now, turn on the topmost version of the flames. Leave the topmost version of the intact...don't mask or erase anything. Change this topmost flame layer's blend mode to screen blend mode. If you see any problems with your flames, you can erase or mask any defects. You can duplicate the screen layer to brighten the effect. Use opacity to control the volume. This would be the easiest solution but you'll have to find some flames that trip your fancy. I haven't tried this out yet so can't say how much better or worse it would be than using a good set of flame brushes along with some blend mode tricks.
    Below shows how close I can get using paint. I only used options available in PSE. I used layer masks that if you had PSE 9 would be native. Since you have PSE 8, you'll need to either download an install an add on that adds the basic layer mask function or use clipping masking.
    Below is a link to a freeware set that includes layer masks. Install instructions are on that site.
    http://www.cavesofice.org/~grant/Challenge/Tools/Files.html
    If you want to go the clipping mask route, have a look at this tutorial:
    http://www.photokaboom.com/photography/learn/Photoshop_Elements/layers/layer_groups_clippi ng_masks/1_layer_groups_clipping_masks.htm
    Before and After the effect.
    I would have posted sooner but had to find a workable solution to making the flames look realistic in Elements as I can’t use the curves tool as it isn’t native to Elements.
    With the help of this YouTube video I came up with something…
    http://www.youtube.com/watch?v=cOIBkWvHOqk&feature=related
    I based this tutorial on the hue/sat numbers, blend modes, and blurs.
    First, I downloaded a flame brush set. This set in specific:
    http://luexo.deviantart.com/art/Scorching-Flames-Brushpack-92945924
    The above set is really nicely done and  has large high resolution brushes.
    One thing I do not agree with in the video is the color used. White is hard to change in the Hue/Saturation dialog. Instead I use 50% gray as my paint color. This is easy to set…either use the 50% color swatch or open the Color Picker and set H to 0, S to 0, and B to 50...hex number is 808080.
    Things to keep in mind include fire is gaseous, bright and the way it burns…it one direction, fire reflects and there is probably going to be some smoke.
    In my example, I am going to set a  lunch cake. Nice 4th of July theme. J
    Let’s start my scorching the item that will be burned. In this case the lunch cake will be scorched.
    Scorch the item…preparing to light it up.
    1. Duplicate image and put image into Linear burn blend mode; opacity 100%. Add layer mask or erase everything but the item to be scorched…the lunch cake.
    2. Duplicate layer you just made in step #1. Change the blend mode to Multiply 100%. Desaturate this layer.  Image Adjustments<Hue/Saturation…move Master Saturation slider to  -100. Take burn tool set to Range: Midtones; Exposure 35%; air brush on…and scorch the item. Make it kind of smudgy. You don’t want an even coat. Make it darker as you get closer to the flames.
    Note: Here I’ve jumped ahead. I already know where my flames are going to be. Either visualize where you want your flames or jump ahead and laid down the basic paint and transform into the correct position. Turn off flame layer (s) when done. So step #3 if you do any repair work isn’t affected.
    3. If you feel you need to do any clone repairs, create a composite image ctrl + shift + alt + e if on PC…cmd + shift + opt + e if on a Mac. Do the clone work on a blank layer over this. With clone tool selected, check the box in the options bar that says something like “All Layers”, “Use All Layers”, “Sample All Layers”…the box says one of those things beside it. I can’t recall which and not sure if it’s consistent between all versions of Elements.  Anyway, Leave layer in Normal blend mode 100% and likewise leave tool in Normal blend mode…opacity to taste. Fix any defects on this layer. You can do the same thing with the healing brush if you need to do any healing. I find it best to heal to a separate layer and not mix and match the healing tool and  clone stamp on the same layer.
    4. Turn off or trash the Clone Stamp comp layer when finished with step #3.
    Let’s Build a Fire…
    5. Create a blank layer in the layers palette….Normal blend mode; 100% opacity.  Make white your foreground color chip.  Grab the paint brush tool…normal blend mode; 100% opacity. Paint one flame on your layer. I have used the 1220 sized flame near the bottom of the brush set I linked earlier. Use the transform command …Ctrl + t (PC) or Cmd + t (Mac)…to size and position the flame. I used  also slightly warped the flame using transform warp. Since you don’t have that in Elements…slightly warp the flame in the liquefy dialog.
    Note: The above flame is pretty much backlighting…you are done with it.
    6. Change the color foreground color chip in your layers palette to 50% gray. Use the same brush tip you used in step #5. Size and position it so it closely matches the white flame in Step #5. Go to liquefy dialog and slightly warp it.
    Note: The goal is for the flames in step #5 and step #6 to be very similar but not exact.
    7.. Duplicate the 50% gray flame you made in step #6 twice. Turn off the top 50% gray flame for now.
    Fire is Bright...
    8. Now that video comes in that I linked.
    (1) Blur the 50% gray flame with Gaussian blur. I used 6 pixels. Go to menu and click Enhance or is it Adjustments<Hue/Saturation…check the box that says “colorize”; change master sliders to Hue 42; Saturation 100; Lightness 0.
    (2)Duplicate the flame you made above…step  (1). Go to the menu bar and click Enhance or is it Adjustment<Hue/Saturation…change master sliders to Hue -43; saturation 0; Lightness 0. Change this layers blend mode to Color Dodge blend mode and merge down…Ctrl + e on PC; cmd + e on Mac.
    Note: This layer will now say Normal blend mode; 100%.
    (3)I duplicated the merged layer I now have from step (2). I changed the blend mode of this layer to Screen and set the opacity to 100%.
    (4) I made a duplicate of the layer I have made in step (2)…the one that now says it’s in Normal blend mode; 100%… then blurred it with Gaussian blur. I used 46 pixels. I moved this layer down in my layers palette so that it rests beneath my other two colored flame layers. The white flame layer is directly below it. Leave this layer in Normal blend mode; 100% opacity.
    9. Go back to 50% gray flame you made in step #6...visibility eye should be off. You should have two of these gray layers if not duplicate one so that you do have tow 50% gray flame layers. (These were not blurred.)  These two layers need to be on the top of the stack. If they are not, move them up so that they are the top two layers. Turn on the visibility of the bottom 50% gray layer. Change the layer’s blend mode to Screen blend mode; opacity 100%. Grab the burn tool. Burn some of the flame base and randomly in the flame of the 50% gray.  Press and hold in the alt key (PC) or the opt key (Mac) and dodge the tops of the flames and do some random dodge work.
    10. Turn on the visibility for the top 50% gray layer. Leave this one alone…no dodge + burn. Set this layer to Screen blend mode; opacity 96%.
    11. Add layer masks to white and color flame layers…not the gray ones. Paint away any unattractive color spill. Bright orange edges…bright white distractions where flame edges don’t align.
    12. Make a composite layer of all layers up to date. Set this layer’s blend mode to multiply; opacity 47%. Add a layer mask and mask out everything but the flames. Tip: You can select the flames by ctrl + shift clicking on each flame layer thumbnail…the shift lets you add to a selection. On the Mac, cmd + shift click the layer thumbnails.
    Flames Reflect…
    13. Make a copy of one of your blurred color flames. Transform it so it rest over item that it should reflect on. In this case I have added a blurred flame onto my son’s eye. The flame is in Overlay blend mode; 33% opacity.
    14 Several steps Eye enhancements to my son’s eye…omitted because it’s off topic
    15. I used a gradient map with a fire like black/red/yellow/white gradient map set to Softlight blend mode; 17% to give my image a hint of a color cast. I masked it so only some skin, hair, and car areas have this slight color cast.
    Where there’s fire there is going to be some smoke...
    16. To make my smoke, I made a separate large document my photo size. I set my color chips to the default b/w. (Shortcut is D.) I went to menu bar and clicked Filter<Render<Clouds. Next I went back to my menu bar and clicked Filter<Render<Difference Clouds. I used Ctrl + f to repeat the Difference Cloud filter until I was happy with the effect…looking for swirled black lines…kind of like lightning. (If on a Mac, use Cmd + f to repeat a filter. I then used the transform command to enlarge the pattern I made. Be sure to scale it so that height and width both are enlarged equally. Next, go to the men bar and select<All ; Edit<Crop. You want to do to get rid of the excess. I think I transformed my patter to something like 200% which makes the file really big. You can do it on your image file but because of file size the transform will take a really long time. When happy copy/paste or drag/drop this pattern into your photo file.
    17. Now blur pattern really good using Gaussian blur. Now, add a layer mask to your pattern layer. Click the layer mask in the layers palette to target it and run the the clouds and difference clouds on the mask just as you do on the pattern layer. Just those filters…no blur.
    Basic smoke pattern final
    18. Duplicate this layer w mask twice. You should have three smoke copies. Turn off all but the bottom pattern copy. Use the paint brush and paint black in mask to hide the smoke everywhere but where you want to keep it. Set this layer’s blend mode to Multiply blend mode; opacity 15%.
    View of the inside one of the smoke layer masks
    19. Turn on the visibility of the next smoke pattern. Again use a black paint to paint where you don’t want paint. (Make this variable as you want the smoke to be varying opacity.)  Layer blend mode Multiply; opacity 15%.
    20. Turn on the visibility of the next smoke pattern…top one in stack. Again use black to paint where you don’t want the smoke. Set this layer’s blend mode to Multiply blend mode; opacity 1%.
    Fire is Gaseous...
    21. Make a composite of all layers by pressing ctrl + shift + alt + e if on PC. Use Cmd + shift + opt + e if on a Mac. Blur your composite image. I used 3 pixels. Set the blend mode to Normal; opacity 64%. Add a layer mask and fill it with black paint to hide the blur effect. Use the paint brush with white paint in the layer mask to blur any sharp edges and base of flames. Remember flame is gaseous.
    Above shows my layers for completed image. Notice the comp for clone layer is off. I did not need it after I did the clone to a blank layer to add some scorched cake around my son's fingers.

Maybe you are looking for