Help with Adobe PS Elements 10~

I was having some problems w/ my Mac harddrive and Adobe PS was not opening. I uninstalled (so I thought) the program and when I tried to reinstall it, it keeps saying there are erros. I have NO idea what to do.. Any tips or help would be very much appreciated.. I am learning how to use MAC and this is so frustrating!

I would recommend you review your installation log to determine what errors you are receiving. You can find details on how to accomplish this at Troubleshoot install using logs | Elements - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html.

Similar Messages

Need help with Adobe Premiere Elements 2

I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

hi Bill -
ok fine. I have PSDs too. I tried what you said.
I put a PSD right beside a JPEG in the timeline. I rendered it (which I
didn't know to do because the instructions don't even mention it. The
instructions are terrible. Seems it leaves out a lot of info.)
So, then I click PLAY on my monitor. I see no difference between the PSD
and the JPEG yet. So, if I want to put this on YouTube, what's the best way
exactly, without gettting too technical? It looks like I have the choice
between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
likes wmv.
From: Bill Hunt <[email protected]>
To: Tommy Midyette <[email protected]>
Date: 6/3/2010 10:01:24 AM
Subject: need help with Adobe Premiere Elements 2
>
When you drag the stills to the Timeline, there should be a red line
above them. Press Enter to Render the Timeline.
Â
Do not know the particulars of PrE 2, but in later versions, you can
Rt-click on the Program Monitor, and choose Magnification = 100%, rather
than Fit. You might have to resize your Program Monitor, but check at 100%.
Â
Also remember a few points:
Â
1.) You are looking at a DVD-quality image now, and that was designed
with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
hi-rez sources and displays is probably less than what VHS vs DVD was, not
that long ago.
2.) You are looking at an emulation, a preview
3.) Your images have already been compressed to JPEG once, loosing
quality. That is why I always work in PSD, especially if there has already
been one JPEG compression, whether in camera, or in the image processing
stage. I keep JPEG either out of my workflow, or as limited, as is
possible. Some do not see the quality loss with JPEG compression, but I do,
and if I can create images that are as good as it gets, I know that my
clients will be happy.
Â
Good luck,
Â
Hunt
>

Help with Adobe Premiere Elements 8.0

Hello!
I recently began fooling around with Premiere elements and I had a couple of questions about it: First, if you could please watch this video: http://www.youtube.com/user/iTerabithia#p/search/6/01qfQSyq1WI In the almost beginning it shows Lucy hug Edmund and then a shot of Lucy crying fades into it and then out again. Do you know how to do that with Adobe Premiere Elements? And also, how is that color achieved from the very beginning of the video? And is there any way to do audio effects? If you could please answer these questions I would appreciate it ever so much!
Thanks!

John T.,
Thanks. I should have added that info.
What does that little "scene" look like to you? I'm thinking a Video Clip on a higher Video Track, and maybe with less that 100% Opacity. Guess that if it covers the whole Frame, it would not be a PiP, officially, but would involve the same principles.
Appreciated,
Hunt - who sometimes gets lost in acronyms and jargon!

Need Help With Adobe Photoshop Elements 2.0

I have and use Adobe Acrobat and three versions of Adobe Photoshop Elements (2, 5 and 7). I use version 2 frequently as I'm more familiar with it and it's simpler to use for what I need to do. All was fine until recently when my computer was installed with Windows 8. Now I can't save photo edits from Version 2.0...... it aborts each time I try. Why is that? It is costing me a lot of wasted time. The other versions that i have don't do that. Need help. Thanks. Stu Snyder.

The first thing i would try is deleting the Photoshop Elements 2.0 Prefs folder as explained in the post #2 linked to below:
http://forums.adobe.com/thread/1254224?tstart=30
Does it happen when trying to save as any file format or just a certain one like jpeg?
Have you tried saving a photo to a different place like your desktop?

Help With Adobe Photoshop Elements Download and Installation

I purchased Adobe Photoshop Elements yesterday and was sent the download link. I tried to download the product but one of the 2 files I need would not download and after a few attempts it blocked my access saying there were too many download attempts. Please help.

if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Help with Adobe Premiere Elements window appearing!

I've owned Adobe Premiere Elements 4.0 for about 5 or 6 years now. I still have the original disc and serial number. I installed it on my laptop (Sony Vaio bought in 2009. Runs on Vista), and when I open the program up and click on "files and folders" and double click on a video, I keep getting a pop-up saying "Adobe Premiere Elements is not working." And then the program closes. It frustrates me. I can't afford a new update. Anyway this can be fixed? It never did this to me on my old laptop which I do not have anymore. Thank you for your time.

blaqk
Before you focus on the Premiere Elements 4 itself, let us look at the computer environment and the properties of the video that you are importing into the project.
1. Given you have Premiere Elements 4. Is it installed on Windows Vista 32 or 64 bit?
2. What are the properties of this video that you are importing into the new project and what have you set as the project preset to match the properties of that source media?...I am looking for video and audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio, duration. If you were to import a few jpg photos into a new project would that shut down the project/program as well?
3. Do you have the latest verision of QuickTime installed on your computer with Premiere Elements 4? Do you have the program set for Run As Administrator and set to run from a User Account with Administrative Privileges?
4. Is your video card driver version up to date according to the web site of the manufacturer of the video card?
5. Is your computer optimized with a program such as ccleaner (regular cleaner and registry cleaner)?
http://www.piriform.com/ccleaner
6. Please describe your computer resources?
Let us start here and then we can decide what next based on your details.
Thanks.
ATR

Can anyone help with Adobe Photoshop Elements 13 installation?

I initially tried the free trial of Photoshop Elements 13, but it wouldn't install. When I received an email suggesting I purchase the product on sale for USD 70. (ending January 3) I purchased it, and have now paid for it and received a serial number. On January 3, when I tried to install it, I was told downloading, extraction and installation were complete, but then it quit. I tried again, but only got as far as 'download complete.' I clicked on 'open bundle,' then got message beginning: "The file archive part of Adobe Photoshop Elements is missing..." I repeated the process and got the same message.
On January 5 I paid a computer professional to install it. He got it working and I actually worked on a couple of images, but it quit after about fifteen minutes, and I am getting the above message again.

if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Help with Adobe Premiere Elements 11 Editor - Won't work after Maverick upgrade

I bought Adobe Elements 11 in March of 2013. It was working fine until upgrading to Maverick. It will not open now. Adobe will not help without a serial number. Apple does not provide serial numbers when you buy directly from the App Store. After 3 hours of trying to unintall and reinstall, no luck. Apple said to call Adobe back, Adobe says to call Apple. Finally just asked Apple to refund me the $85.00. They said said they ‘can’t’ since I’ve ‘had it for so long’ (7 months ?? ). They said the problem was my fault because I didn’t check and make sure Adobe Elements was compatible with Maverick before installing Maverick. I should mention that it states (on the App Store page) that Adobe Elements 11 is "compatible with OS X 10.7.5 or later”.   Just wondering if anyone else has experienced this problem and if any kind of resolution was achieved?   Again, any help would be greatly appreciated.
Tony

Yes and no help.
See discussion
Please visit http://www.adobe.com/support/contact if there are more questions for Adobe. Thank you.
General Info
Chat start time      Dec 13, 2013 6:52:37 AM EST
Chat end time      Dec 13, 2013 7:08:55 AM EST
Duration (actual chatting time)      00:16:18
Operator      Vaibhav
Chat Transcript
info: Hi, there are several customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
You might also try our community forums, where experts are online 24/7.
info: You are now chatting with 'Vaibhav'
Vaibhav: Hello. Welcome to Adobe Technical Support.
Vaibhav: Please allow me a moment while I look into your account & verify the details.
Jerry: okay will wait
Vaibhav: Can you elaborate the issue please?
Jerry: I've been trying to open the app, its does not open it give me an error
Vaibhav: Well we are getting many customer with this issue
Vaibhav: premiere elements 11 is not compatible with MAC 10.9
Jerry: okay what are you doing to resolve the problem
Vaibhav: Well if there will be any update we would inform all the customers right now we have send this to engineering
Jerry: A friend of mine was sent a link that allowed them to reinstall the application and they were also given a serial number as well can't you do the same for me I really need to use this application asap
Vaibhav: for this you need to contact customer services or sales
Jerry: I'm not looking into buying a new copy I NEED HELP!!!!!!
Vaibhav: Well we can not help in this case as this version was released before mac 10.9
Vaibhav: and if you want to use it on MAC 10.9 you would need to purchase Premiere Elements 12 and for that need to contact sales
Jerry: It looks like I am not going to get the same help as every one,just no that you've lost a customer in me
Vaibhav: Well there is nothing that we on chat or phone can do in this
Vaibhav: Thank you for contacting Adobe. Good Bye.
info: Your chat transcript will be sent to [email protected] at the end of your chat.

Need help with Adobe Premiere Elements 9 for the Windows XP PC

Just got it today, so I could make my own video and audio files from pre-existing ones. I first used a version of Adobe Premiere back in school in the '90s, and seemed to easily make them there, while not working on school work. There was a row for inserted video, and a row below that for inserted audio. I'm out of college currently, and just bought Elements 9, as said, but am struggling with it. Could someone please tutor me to get me started? Perhaps even talk over the phone? I'm trying to combine different video and audio tracks into a new singular video/audio file.
Thanks in advance.
>>
Welcome to the forum, but unfortunately, you have posted to the Premiere Pro, CS 4 and Earlier forum.
Instead, you should post to the PrElements Forum, as few here will know anything about PrE 9.
Now, the starting secret of PrE is your Source Files. Can you tell us the full details of those?
Next, matching those to the correct Project Preset, is the next step. Can you tell us what you chose at New Project?
For a list of some of the resources for learning PrE, see this ARTICLE.
Good luck,
Hunt
>>
What are Source Files? You mean the videos I'm using? The main one is here:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Two to four additions to it will be used with video parts from here:
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
And my first project is a .prel file. Is that what you meant?
Is it possible I could get assistance over the phone?
Thanks.

I created a more precise list of what I wish to combine to make one new video program:
Audio:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:33) (All)
Video:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:08)
Fade to
Transformers_S2.mpg (0:31 - 0:33)
Fade to
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
Rodimus.mpg (0:00- 0:08) (Note: Should start after grey jet passes by on top of screen (less than a second in), and stop after blue robot tramples over the other two robots, cutting off the part where he's shot at from the sky, and all that afterward.)
http://www.youtube.com/watch?v=5yd1OmZvU8w
(1:34 - 1:38) (Note: Should start as soon as video beings, and end when the four side robots are shooting their laser guns, and the one in the middle shoots his shoulder-cannons, cutting off the part with the bridge and missiles, and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
trypt.mpg (0:15 - 0:16) (Note: Only shows the brief second or two where the five robots quickly transform to one big robot.)
http://www.youtube.com/watch?v=h23kRJ9i058
(5:22 - 5:25) (Note: Should start with all 5 robots appearing onscreen, and end with them, in a combined robot, firing at the screen, cutting off the white laser-shooting base/battle-station and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:23 - 0:33) (Note: Should start with lava-flowing ending, and lined-walkway appears, and goes to the end.)
Not sure if I can get all of these videos in, in the 33 second time limit. I'm willing to cut either the trypt.mpg clip, and/or the youtube link-clip below it.
I have a youtube downloader program, so no worries there. Also need to know how to cut video so I can make these clips that are from youtube and tfarchive.
I also want the video to contain the same quality as shown from each file here, and all fit the size of the largest file (the youtube one, I think it is).
Please LMK how to do this, and if any of this is unclear. Things like this are all I really want to use APE9 for, so I won't be asking much else here.
Thanks.

Help with Adobe Photoshop elements 10 download

I have been trying for 3 days to download a copy of PSE 10. I have tried everything suggested in the forums with no luck. I even tried the direct download links and they did't work. I received a copy of PSE 10 from a promotion with EVGA. I can't understand why adobe makes it so difficult to downlaod programs. The Downlaod asistent is terriable. All I want is to downlaod the PSE 10 files. I have never had this much trouble with any product before. Adobe why not make it easier for us to try your products. If the failure in the ADA are common why not just correct that. As a share holder I am even less happy.

For the direct download links to work you need to follow the Very Important Instructions to the literal letter.

I need help with adobe premiere elements 12

I just bought premiere elements 12 and i tried to upload a video to youtube and it was longer than 15 minutes and it said it was to long to upload to youtube. I have uploaded a 22 minute video before how can i upload a longer video thanks.

YouTube won't allow you to upload a video that long directly from Premiere Elements.
If you've got a modified YouTube account that allows longer videos, you can do so by manually uploading a video you output using Publish & Share/Computer/AVCHD with the YouTube HD preset.

Help with adobe shotoshop elements 10

can I remove photo shop 3 using windows add and remove after transfering photos to elements 10. Will I lose any of these photos in elements 10?

You can go-ahead un-install the software, it will not affect the photos

Can anyone help me print a phot pacage with Adobe Photshop Elements 8?

I am trying to print a picture package with Adobe Photshop Elements 8. The package size is letter (1)5x7 (4) 2.5x3. When I press print, the package is sent to my printer (an HP Photosmart Premium), but it never prints.
My computer shows it is "printing", but it just remains stuck in the que. I cannot even delete or cancel the jammed print job without shutting off the printer, closing the program, and rebooting my computer.
I can print individual pictures with Adobe Photoshop 8 and I can print other pictures and documents from other applications on my computer. So my computer and printer seem to be communicating and functioning correctly except during the use of APE 8.
The problem seems to be a gliche in the adobe program which does not allow me to print photo packages. Does anyone know how to fix this?

Though I can't tell you how to fix your problem, you can use a work-around to print your picture photo.
You can easily save your picture package as a pdf file which you can print at your convience.
install any print-to-pdf application.The application would register itself as a printer and whenever sent a page to print, would convert and save it as a pdf
prepare your picture package and print it using the print-to-pdf application
load the saved pdf file and print it
Adobe has its own print-to-pdf application too. http://www.adobe.com/products/acrobat/print-to-pdf.html

Remove Green Screen with Adobe Photoshop Elements

Hi,
I have setup a Green Screen in my home. I took some pictures of my wife with the Green Screen Background and want to remove the Green Screen and replace with a different background. I was able to do this via the Adobe Premiere Elements 7.0 but need help with the Photoshop Elements.
Any help is appreciated.
Sridhar

FWIW, She is really easy to select on that green screen if you use a few tricks. The screen shots are in CS3 my preference but worked with Elements limitations to show you how easy she can be selected without any filters.
My end product doesn't look as good as Mark's though. That's a tough act to follow. Thought I'd post this anyway just in case you couldn't get that filter to work in Photoshop Elements 7,
First, make a copy of the image and desaturate it to make it black and white. I prefer using Hue/Saturation from the image menu (CTRL U) and moving desat slider down to -100. Next Invert it (CTRL I), then run levels from the image menu (CTRL L) to push the image towards pure white and black...well close. It should look something like this when these steps are done.
Copy this image to a new layer. (Just in case something goes wrong so you don't have to repeat the last steps). Leave the copy in Normal blend mode. Grab your paint brush tool. Set the brush tool's mode to Overlay blend mode. You will use black and white paint to push dark gray to black and light gray to white. When done, it should look something like this:
Not perfect...I did this really fast and was a bit sloppy and didn't get all of my light grays pushed to whites. Probably not a problem for the hair edges but would need to be fixed for face and body areas as this will be a mask to make the selection.
Select mask that was just made and copy it into your clipboard. Select<All; Edit<Copy. Create and adustment layer mask that has a mask. I used the Solid Color Fill Adjustment layer. Alt click the mask of the adjustment layer you created. It will turn the document white. This is because the mask is now the focus. Now paste. Edit<Paste. This will paste the above mask into the adjustment layer mask. Now, either alt click the mask or click on another layer to remove the focus from the mask. You'll use this adjustment layer as a base to a clipping mask. See next paragraph.
The Solid color fill layer (or whatever you picked) with your mask is going to be the base on which your selection will be built. Create a copy of your original image up above this base layer. Now, hold in the alt key and move your curser in the layers pallete to the line separating these two layers. Notice the cursor changes to an odd symbol...a solid ring and a hollow ring with an arrow. Click the palette on the line separating these two layers. (Release alt key when done.) She should now be covering the mask you created. Areas that are white in the adjustment layer mask will show the original image; areas in black in the adjustment layer mask will be transparent. (Areas that contain shades of gray would be semi-transparent...amount based on the gray's brightness value.)
For the green cast on the edges, I removed that by using a Hue/Saturation adjustment layer to remove the green spill over. If you only wanted to effect the girl and not a new background add it to clipping mask. (Same way...alt click the line between her image and the Hue/Saturation layer.)
Not perfect but this is what I came up with based on the above mask:

Problem with Adobe Premiere Elements 10 : error DW046

Dear community members,
I have bought Adobe Premiere Elements 10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
When creating a new project , I get the following message :
following a serious error, Premiere Elements 10 must stop
Then I click OK and I get a new message :
The Premiere 10 application has closed suddenly after having been rebooted
Then I end up to the error report window. I have sent the error report to Apple ( I can send it to you if you want)
I have also got the following error message :
DW046 : following conflicting process were running, block : dynamiclinkmanager
Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
Thanks you for your help

AT Romano,
The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
It seems that it is now working.
Thank you, your reply was very quick and your advices very good
Kitaguchi38
Date: Wed, 1 Jan 2014 19:39:00 -0800
From: [email protected]
To: [email protected]
Subject: problem with Adobe Premiere Elements 10 : error DW046
    Re: problem with Adobe Premiere Elements 10 : error DW046
    created by A.T. Romano in Premiere Elements - View the full discussion
kitaguchi38
When you get the message
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
Are you getting message to close the dynamiclinkmanager so that you can move forward?
If so, please check out dynamiclinkmanager location in the following link
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
Have you seen this Photoshop Elements Forum thread with the same DW046?
http://support.muse.adobe.com/message/4771879
More later.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help with Adobe PS Elements 10~

Similar Messages

Maybe you are looking for