Help with Aperture 1.5 & OSX Snow Leopard
Using iMac w/intel core 2 Duo, 1GB RAM, over 100GB of HD left.
Just upgraded to Snow leopard, getting ready to move up to LION (after I get an additional 1GB of RAM).
Discovered my Apert. 1.5 can not be used with OSx SL 10.6.8 and need Apert.2. or 3.
Since I already have AP 2 on hand, I'll be using 2.1 + upgrades.
My questions are:
1.Will AP2, once installed & updated, recognize my pics in 1.5?
2. Will they auto transfer to AP 2 or do I have to manually move them.
3. If manual is required, how do I accomplish this without being able to open 1.5?
I checked Finder and under Ap library I can see my folders and individual pics.
Could I simply drag Finder's AP1.5 Library folder into the folder for 2.x or into
2.x once opened?
I do have a external back-up of my HD but it's an older copy and would lose my new stuff (yep, lesson learned).
Any help would be greatly appreciated.
George
When you start the new Aperture on the old library Aperture should tell you the library needs to be upgraded and offer to do it. You can upgrade the library or quit.
Make sure you have a good working backup of your library before you upgrade it. While it normally goes ok it might not. Plus if for whatever reason you need to go back to the old version of Aperture there is no way to downgrade the library.
Let me just comment on your system, even though you didn't ask about that. 1GB of ram is way to little to have and expect any decent performance from Aperture (or you system for that matter). Even 2gb is at the bottom end of what is acceptable.
Don't know which iMac you have but I believe all intel iMac's were able to go up to at least 4gb of ram. If that is the case then I would strongly recommend you go to 4, 8 would be even better. Once you put Lion on you'll really feel it.
Just a thought, good luck.
regards
Similar Messages
-
Tips and help with re-installing Lion over Snow Leopard
I had MAJOR issues with my initial Lion install on my Mid-2009 MBP- so much so, that I had to wipe my hard drive and re-install Snow Leopard and all my applications. My major issues were as follows:
1. All my files were locked out- I could open them in most cases, but I couldn't overwrite them- Lion had aded some funky permissions scheme that I didn't recognize, and my user name wasn't present on any of them. In some cases, I couldn't even open files, even though they were resident on my hard drive (and in my own user folder) before the upgrade to Lion.
2. Apple's own Universal Binary apps wouldn't work after the upgrade. Final Cut Pro 6, in particular, came up with a message that it was a "PowerPC" app and wouldn't run- yet Shake 4.1 would run just fine!
3. Adobe Creative Suite 3- after the upgrade, my Abode Ceative Suite 3 apps worked just fine, for about a day- that is, until I tried to correct the file permissions issue by changing permission on a few of my folders in my User folder (and electing to change permissions in the files contained therein)- at which point my Adobe apps told me that they were damaged and needed to be reinstalled. Yet after uninstaling and reinstalling the entire Creative Suite 3 times, I still would get the same message.
My entire workflow is Adobe CS and FCS2- why chould I have to pay the upgrade costs just to use Lion? FCPX is completely brkoen for my workflow and eqipment, and Adobe can't even guarantee that CS5 works with Lion- so why does Apple insist on Lion when it's hardly even compatible with its own products?
I really want to use Lion, but I am looking for some tips on instalation to kep these problems from happening again. I didn' have ANY of these problems with upgrading OS 10.2 through 10.6. Any help with prepping my system/files for upgrading would be helpful. Thanks!any new Apple kB articles
http://support.apple.com/kb/index?page=articles
Me, I think clone backups are more useful, and only use T.M. as secondary.
Using Cloning as a Backup Strategy
I'd assume that professional apps may need to be tested still; and of course check to see what you have that depends on PowerPC code and Rosetta first. That has some in a tither.
A clone lets you still be able to boot Snow Leopard. Check out Carbon Copy, SuperDuper. -
Need help with Mountain Lion downgrade to Snow Leopard
Recently upgraded to Mountain Lion, my daily applications do not work and i am losing patience, I need help downgrading to snow leopard, i have the snow leopard CDS that came with my mac
***detailed instructions help***
my mac specs
macbook pro 13" early 2011
My time machine
i have a backup with mountain lion, and i also have a backup from snow leopard,(my goal is to restore my latest backup from mountain lion to snow leopard)
i have backed up my files using time machine AND justcloud
My question is how, i do not want to lose any data, also is there any thing i need to be aware during this processDowngrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
Help with Upgrading from Tiger to Snow Leopard
I would like to upgrade my os from Tiger 10.4.11 to Snow Leopard. Best Buy said that I would have to buy the box set for $129 for that to be possible. The box set says that it includes Snow Leopard, but how do I know it's just not the Snow Leopard upgrade? Any advice is greatly appreciated!
Hi She, and a warm welcome to the forums!
The $29 version works fine if you don't need iLife or iWork Apps that the "Box Set" contains.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/ -
SSD Issue: Can't Install OSX-Can I use Target Mode to Install OSX Snow Leopard onto a laptop?
Cannot reinstall my OSX Snow Leopard from my original disks: 2010 MacBook Pro 7,1.
Cannot do a Recovery Install—just put in a solid state drive, and have to do a clean install, cannot clone old OS off the old hard drive.
Can I make my tower/desktop computer work somehow, I have a .dmg Snow Leopard Installation file on my tower. I'm out of options; I've tried to do a recovery download of Yosemite and usb startup thumb drive. Nothing is working: crashing, stopping short of full installation.
I'm just trying to get any operating system to install on the MacBook Pro. Nothing seems to work.
-the old hard drive had issues that couldn't be resolved, seemed like software.
-swapped it out with ssd drive, had made backup of all files.
-tried to startup with installation disks/ original osx snow leopard disk. Failed, wouldn't complete
-tried to do recovery download installation via internet, cmd-r, with Yosemite but that seems like a long shot. Just kept stalling, so it seems like this model cannot support that os without first having the original os?
-made a thumb drive an installation of osx 10.6.8
-nothing is workingSince you provide no information regarding what has happened other than it didn't work, how can we help you? I can only give you the whole process:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the SSD's entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now log onto the App Store with your Apple ID. Go to your Purchases page and re-download the last version of OS X that you purchased and/or downloaded prior to the release of Yosemite. -
our imac recently displayed the white screen and flashing file icon with a question mark on it, it runs osx snow leopard but i dont have the installation disc, can i reboot it off the osx lion disc? or do i need to buy the snow leopard disc and reboot it off that first. thanks for your help in advance!
Yes you can. If the iMac meets the system requirements for Lion then you can boot it off the Lion disc (which is actually a USB drive, unless you download and burn it yourself).
-
The certificate on my applications install DVD for bundled software has expired. I am unable to reinstall with this dvd on my snow leopard on macbook pro. Pl help. If I use Lion, it works fine with the expired certificate. But doesnt work with snowleopard.
Create a DMG file of your DVD (instructions here: http://www.wikihow.com/Make-a-DMG-File-on-a-Mac).
Then follow the instructions here: http://managingosx.wordpress.com/2012/03/24/fixing-packages-with-expired-signatu res/ -
Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.
Where are addresses kept on MAIL? I don;t like the new format at all. Frances
Begin forwarded message:
From: Frances Topping <[email protected]>
Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
Date: August 25, 2014 at 9:46:01 AM EDT
To: discussions-replies <[email protected]>
Old Entourage is POP and new Mavericks MAIL is IMAP I believe. I don;t know how to export in the forms you mention. Frances -
im on osx snow leopard but the lion is no longer available on app store. How can i still upgrade to lion? my computer by the way is not compatible with mountain lion. thanks
Hello royalaqua,
I do think you should ask yourself if upgrading to Lion is the right course to take.
Snow Leopard is an excellent OS and Lion has literally been frozen out after barely a year. Remember too that some of your apps may not work with Lion (those that have Rosetta, for example) so that could mean more new purchases. Plus you may need to uprate your RAM too. -
How do i get a dvd with osx snow leopard to boot from since i lost mine?
Having trouble with my early 2009 intel iMac. I have reset PRAM and SRC, used disk utility in safe mode to repair disk permissions (several were found/repaired) and tried to verify disk. System said it could not verify disk because it needed to be repaired while booted from another source. I could not find my OSX Snow Leopard disk, tried to start from Leopard disk. Now the system wont go through boot process at all. the gray screen with logo and progress bar appears, but after a minute the computer shuts down. I did run the apple hardware test (start up while holding D key) and no hardware issues were found. This must be a software issue.
Is there a way I can download a copy of OSX Snow Leopard on my laptop so I can burn a disk to boot my iMac from so I can repair the disk?You will need the Mac OS X DVD later, because it's clear that there's a problem with the hard disk. Your Mac turns off because fsck couldn't repair the hard drive, so Mac OS X can't start up. Your only option is to format the hard drive, because it's not possible to repair it.
As you have the Leopard DVD, insert it and hold the C key while your Mac is starting. Then, choose your language and go to Utilities menu (on the menu bar) > Disk Utility, choose your hard drive at the top of the sidebar, go to Erase tab and erase the drive. If it's working properly, close Disk Utility and reinstall OS X.
If it couldn't be erased, the hard drive is damaged and you need a different one -
Question:
When I sync with my iphone I get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open. This continues until I quit Entourage. How do I turn this message off? It interferes with any other work I am doing. I appreciate any suggestions.I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck. -
I currently have Mac OSx 10.4.11, and just purchased OSX Snow leopard. Can I keep my original version of iMovie along with the new version when I download the new operating system?
I purchased the Mac Box Set which includes Snow Leopard, iLife, and iWork. So after downloading the box set, will I be able to keep my iMovie 6.0.3?
-
I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?
I got the macbook from a friend a few years ago and it already had OSX Lion installed. Whenever it boots from the Snow Leopard disc it says it cannot install from disc. Is there anythingI can do or should I take it to an Apple store to get them to boot OSX Lion for me?Insert your Snow Leopard disc and restart, press and hold the C key as soon as you hearthe startup chime, hold C until you see the Apple Logo. When your computer starts up you'll be at the first install screen, choose your language and click the arrow to go to the next screen. This screen has a menu bar, from the Utilities menu select Disk Utility, select your hard drive, this is the one with the manufacturers name or numbers, click the partition tab and then delete any existing partitions by selecting them and clicking the minus. In the drop down box select one partition and click apply. Name your hard drive and click erase. When it's done quit DU and go back to the installer, install Snow Leopard. When the installer is done and the computer is back up and running run Software Update to get to 10.6.8
-
Iphoto8 can work with osx snow leopard
i have a old macbook air with i photo 8, i have installed osx snow leopard last week and after this i can not see my video from my iphone in the iphoto, why?
when i drag it to desk top can play.Welcome to the Apple Discussions. When you installed Snow Leopard did you also select the option to install Quicktime Player 7. If you don't have Quicktime Player 7 installed use the SL install disk to do a custom install and install just Quicktime Player 7. Then see if you can play the videos from iPhoto.
Actually, with iPhoto 8, the videos will open outside of iPhoto when double clicked on from inside of iPhoto.
OT
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
NOTE: this is not the same as routinely backing up your entire iPhoto library folder to protect your photos. It only protects the loss of your organizational efforts that the database file contains.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete. -
Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?
Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?
Hi,
You can check system requirement for CS5 in link : http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection5/systemreqs .html
Regards,
Jatin Dembla
Maybe you are looking for
-
Adobe AIR Installer Crashes - Mac OS 10.4.11
I've tried the International workaround to no avail. Here's what I get from the Console: 2008-12-17 23:24:31.879 Adobe AIR Installer[988] *** +[WebFontCache fontWithFamily:traits:weight:size:]: selector not recognized 2008-12-17 23:24:31.879 Adobe AI
-
Skype can't connect. HOW DO I FIX IT!!!!!!!
Everytime i bring up my skype program i log in and the blue circle spins for about 20 seconds. Then highlighted in yellow it comes up with, Skype can't connect. I have tried re-installing it, and fidiling with my internet options. My firewall is comp
-
Hi everyone; How would I add a certain number of white [blank]spaces to the end of a string? I know how to add a space, but don't know how to add more than one. Thanks in advance.
-
I am trying to activate our adobe in-design and we are getting a message "serial number you provided is valid but a qualifying product could not be found on this computer"
-
Hi All, I have got an issue with item based approval of SC. Approval loop is getting repeated multiple times when some changes are made to SC( e.g. cost center change, G/L a/c change etc. ). I guess it is repeating approval process only when changed