Help with Aperture/T2i/iMovie/large file ( 2GB) issue.

I am having an issue with a very large file (3.99 GB) that I shot with my Rebel T2i. The file imports fine into Aperture, but then it isn't recognized at all by iMovie. I found out that iMovie can only handle files that are 2 GB or smaller.
So now, I am trying to figure out how to chop my mega file neatly into a pair of 2GB halves. When I use the trim function, that does not seem to do the trick -- this may be a case of Aperture's non-destructive nature actually working against me.
Does anyone have a solution for this? My intuition suggests that this may be a job for QuickTime Pro -- but I wasn't sure how that works now that we all have QuickTime X.
Much appreciated.

The file may well be in the wrong format, can you tell us more about it. See This

Similar Messages

Need help with email transfers of large files WRT160nl

This is a new router for my home based business network. I am using Windows XP, Vonage, cable, a Dell power connect 2708 to expand ports and the WRT160nl router. Two issues: the most important is that I can no longer email large pdf files (contracts for instance) without breaking them into 6 to 7 Mg size files. Even 10mg files will not go. My previous Linksys wireless router (since 2003) never had this problem. Any ideas? I should also mention that I scan the files before trying to upload via email to clients.
Also, at least once a day I have to restart my desktop (wireless) because the connection to our server (where all our files are stored) has dropped. I can access the internet and email. Any ideas?
Many thanks

Open the setup page of the router and change the MTU size to 1365. Save the settings.
Go to Wireless tab and click on Advanced wireless settings sub tab. Change the Beacon Interval to 75, RTS and fragmentation threshold to 2306. Save the settings and power cycle the router. See if that makes any difference.
Make sure that firmware on your router is upgraded.

Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please

Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please

Raws, even if not compressed, Sould be smaller than a 24-bit Tiff, since they have only one bitplane. My T3i shoots 14 bit 18MP raws and has a raw file size of 24.5 MB*. An uncompressed Tiff should have a size of 18 MP x 3 bytes per pixel or 54 MB.
*There must be some lossless compression going on since 18 MP times 1.75 bytes per pixel is 31.5MB for uncompressed raw.

Mac OSX desktop dropping connection with multiple copy processes & large files

The servers are 6.5 SP3 running NFAP, the MAC OSX is 10.4.2 updated. The
volume the macs are using is part of a cluster. The users mount the volumes
on their macs and everying is for the most part fine. If they grab a bunch
of files and copy them from desktop to server it's fine as long as it's only
a single copy process. The users are part of the hi-res department and the
files can be 1GB or larger. If they drag one or more large files, and then
while that's copying they drag some more files, so both copy processes are
running at once....quite often the volume will dismount from the desktop and
you will get unable to copy because some resource is unavailable. Sometimes
the finder crashes, sometimes not. Often the files that were partially
copied get locked and the users needs to reboot their Mac in order to delete
them. I'm getting pretty desperate hear, anyone have an idea what's going
on. I don't know if this is a Tiger thing or a large file thing or a
multiple copy stream thing, a netware thing or a mac thing.....we have
hundreds of other users running OSX 10.3 and earlier who are not reporting
this problem, but they also don't copy files that size. Someone please tell
me they have seen this before....thanks very much. Oh, before going to 6.5
and NFAP the servers were 5.1 with Prosoft server and they never had the
problem.
Jake

Thanks for your help, I have incidents open now with Apple and Novell, I
hope one of them can provide something for us. We tried applying 6.5 SP4 to
a test server....the problem still happened but was "better", the copy
operations still quit but with SP4 applied the volume did not dismount....or
if it did it remounted automatically because it was still connected after
OKing through the copy errors.
"Jeffrey D Sessler" <[email protected]> wrote in message
news:[email protected]...
>I tried two 2GB files. No problems at all but I'm in a 100% end-to-end
>Gigabit environment. My server storage is also a very-fast SAN.
>
> Best,
> Jeff
>
>
> "Jacob Shorr" <[email protected]> wrote in message
> news:[email protected]...
>> Jeffrey,
>>
>> Have you tried the exact same test, dragging say two 500MB files in
>> seperate
>> copy operations? I hear what you're saying about the 10/100 link, but we
>> don't run gigabit to the desktops, and we're not going to anytime soon.
>> Even if that could resolve the issue we need something kind of other fix
>> for
>> our infrastructure. I will look into any errors on the switch.
>>
>> "Jeffrey D Sessler" <[email protected]> wrote in message
>> news:[email protected]...
>>> Well, considering that I'm not seeing the issue on my 10.4.2 machines
>>> against my 6.5Sp3 servers, I'm not sure what you should do at this
>>> point.
>>> Since you say that the 10.3 machines don't have an issue, it makes it
>> sound
>>> to me like this is an Apple issue.
>>>
>>> The logs point at a communication issue... Is there anyway to get that
>>> Mac
>>> on to a Gigabit connection to see if you can duplicate it?
>>>
>>> The other option is to wait for 10.4.3 to be released and see if the
>> problem
>>> goes away.
>>>
>>> Again, on only a 10/100 link, one copy of a large file _will_ saturate
>>> the
>>> link.Perhaps 10.4.2 has an issue with this?
>>>
>>> Also, when you're doing the copy, what to the error counters in the
>> switches
>>> say?
>>>
>>> Jeff
>>>
>>> "Jacob Shorr" <[email protected]> wrote in message
>>> news:[email protected]...
>>> > There are definately no mis-matches. This has been checked and
>> re-checked
>>> > a
>>> > dozen times. It's only on 10.4......we can replicate it on every 10.4
>>> > machine, and we cannot replicate it on any machine that is 10.3. What
>>> > should I do to go about getting this fixed, should I be contacting
>>> > Apple
>>> > or
>>> > Novell? The speed is always good until it actually decides to drop
>>> > and
>>> > cut
>>> > off.
>>> >
>>> >
>>> > "Jeffrey D Sessler" <[email protected]> wrote in message
>>> > news:7jj%[email protected]...
>>> >> Looks like communication between the Mac and the Netware server is
>>> > dropping.
>>> >> AFP in 10.3 and 10.4 support auto-reconnection but I'm sure that it
>> will
>>> >> fail the copy process.
>>> >>
>>> >> I'd first check to make sure that there are not any mis-matches on
>>> >> the
>>> >> switch e.g. the Mac is set to Auto (as it should be) but someone has
>> set
>>> > the
>>> >> switch to a forced mode. Both should be auto. A duplex miss-match
>>> >> could
>>> >> cause the Mac not to see the heart beat back from the Novell server.
>>> >>
>>> >> Like I said, if the workstation is only on 10/100, a single copy
>> process
>>> > on
>>> >> a G5 Mac will saturate that link. Adding more concurrent copies will
>> only
>>> >> result in everything slowing down and taking longer, or you'll get
>>> >> the
>>> >> dropped connections.
>>> >>
>>> >> Best,
>>> >> Jeff
>>> >>
>>> >>
>>> >> "Jacob Shorr" <[email protected]> wrote in message
>>> >> news:Ybc%[email protected]...
>>> >> > Take a look at the last entries in the system log right after it
>>> > happened,
>>> >> > let me know if it means anything to you. Thanks.
>>> >> >
>>> >> > Sep 29 13:26:10 yapostolides kernel[0]: AFP_VFS afpfs_mount:
>>> >> > /Volumes/FP04SYS11, pid 210
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>> doing
>>> >> > reconnect on /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> > connect
>>> >> > to
>>> >> > the server /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> > Opening
>>> >> > session /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> > Logging
>>> >> > in
>>> >> > with uam 2 /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> >> > Restoring
>>> >> > session /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS
>>> >> > afpfs_MountAFPVolume:
>>> >> > GetVolParms failed 0x16
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> >> > afpfs_MountAFPVolume failed 22 /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides KernelEventAgent[43]: tid 00000000
>>> >> > received
>>> >> > VQ_DEAD event (32)
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> > posting
>>> >> > to
>>> >> > KEA to unmount /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides KernelEventAgent[43]: tid 00000000
>>> >> > type
>>> >> > 'afpfs', mounted on '/Volumes/FP04SYS11', from
>>> >> > 'afp_0TQCV10QsPgy0TShVK000000-4340.2c000006', dead
>>> >> > Sep 29 13:31:13 yapostolides KernelEventAgent[43]: tid 00000000
>>> >> > found
>> 1
>>> >> > filesystem(s) with problem(s)
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_unmount:
>>> >> > /Volumes/FP04SYS11, flags 524288, pid 43
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> > "Jeffrey D Sessler" <[email protected]> wrote in message
>>> >> > news:GH%[email protected]...
>>> >> >> We move large files all the time under SP3 with no issues however,
>>> > there
>>> >> > are
>>> >> >> several finder/copy/afp issues in Tiger that are do to be fixed in
>>> >> >> 10.4.3.
>>> >> >>
>>> >> >> Also, if you have any type of network issue such as duplex
>> mis-matches
>>> > or
>>> >> >> are running say, only a 10/100 network, a single Mac can not only
>>> >> >> transfer
>>> >> >> more than 10MB/sec (filling the network pipe) or generate so many
>>> >> > collisions
>>> >> >> (duplex mis-match) that you could drop communication to the
>>> >> >> server.
>>> >> >>
>>> >> >> What type of server (speed, disks, raid level, NIC speed) and what
>>> >> >> type
>>> >> >> of
>>> >> >> network (switched gigabit, switched 10/100, shared 10/100, etc.)
>>> >> >>
>>> >> >> How long does it take to copy that single 1GB file to the server?
>>> >> >>
>>> >> >> Does a single copy process always work?
>>> >> >>
>>> >> >> Jeff
>>> >> >>
>>> >> >> "Jacob Shorr" <[email protected]> wrote in message
>>> >> >> news:[email protected]...
>>> >> >> > The servers are 6.5 SP3 running NFAP, the MAC OSX is 10.4.2
>> updated.
>>> >> > The
>>> >> >> > volume the macs are using is part of a cluster. The users mount
>> the
>>> >> >> > volumes
>>> >> >> > on their macs and everying is for the most part fine. If they
>> grab
>>> >> >> > a
>>> >> >> > bunch
>>> >> >> > of files and copy them from desktop to server it's fine as long
>>> >> >> > as
>>> > it's
>>> >> >> > only
>>> >> >> > a single copy process. The users are part of the hi-res
>> department
>>> > and
>>> >> >> > the
>>> >> >> > files can be 1GB or larger. If they drag one or more large
>>> >> >> > files,
>>> > and
>>> >> >> > then
>>> >> >> > while that's copying they drag some more files, so both copy
>>> > processes
>>> >> > are
>>> >> >> > running at once....quite often the volume will dismount from the
>>> >> >> > desktop
>>> >> >> > and
>>> >> >> > you will get unable to copy because some resource is
>>> >> >> > unavailable.
>>> >> >> > Sometimes
>>> >> >> > the finder crashes, sometimes not. Often the files that were
>>> > partially
>>> >> >> > copied get locked and the users needs to reboot their Mac in
>>> >> >> > order
>>> >> >> > to
>>> >> >> > delete
>>> >> >> > them. I'm getting pretty desperate hear, anyone have an idea
>> what's
>>> >> > going
>>> >> >> > on. I don't know if this is a Tiger thing or a large file thing
>> or
>>> >> >> > a
>>> >> >> > multiple copy stream thing, a netware thing or a mac
>>> >> >> > thing.....we
>>> > have
>>> >> >> > hundreds of other users running OSX 10.3 and earlier who are not
>>> >> > reporting
>>> >> >> > this problem, but they also don't copy files that size. Someone
>>> > please
>>> >> >> > tell
>>> >> >> > me they have seen this before....thanks very much. Oh, before
>> going
>>> > to
>>> >> >> > 6.5
>>> >> >> > and NFAP the servers were 5.1 with Prosoft server and they never
>> had
>>> >> >> > the
>>> >> >> > problem.
>>> >> >> >
>>> >> >> > Jake
>>> >> >> >
>>> >> >> >
>>> >> >>
>>> >> >>
>>> >> >
>>> >> >
>>> >>
>>> >>
>>> >
>>> >
>>>
>>>
>>
>>
>
>

Help with Photo Gallery using XML file

I am creating a photo gallery using Spry. I used the Photo Gallery Demo (Photo Gallery Version 2) on the labs.adobe.com website. I was successful in creating my site, and having the layout I want. However I would like to display a caption with each photo that is in the large view.
As this example uses XML, I updated my file to look like this:
<photos id="images">
            <photo path="aff2010_01.jpg" width="263" height="350" thumbpath="aff2010_01.jpg" thumbwidth="56"
               thumbheight="75" pcaption="CaptionHere01"></photo>
            <photo path="aff2010_02.jpg" width="350" height="263" thumbpath="aff2010_02.jpg" thumbwidth="75"
               thumbheight="56" pcaption="CaptionHere02"></photo>
            <photo path="aff2010_03.jpg" width="350" height="263" thumbpath="aff2010_03.jpg" thumbwidth="75"
               thumbheight="56" pcaption="CaptionHere03"></photo>
</photos>
The images when read into the main file (index.asp) show the images in the thumbnail area and display the correct image in the picture pain. Since I added the pcaption field to the XML file, how do I get it to display? The code in my index.html file looks like this:

rest of the code here:
        <div id="previews">
            <div id="controls">
                <ul id="transport">
                    <li><a href="#" class="previousBtn" title="Previous">Previous</a></li>
                    <li><a href="#" class="playBtn" title="Play/Pause" id="playLabel"><span class="playLabel">Play</span><span class="pauseLabel">Pause</span></a></li>
                    <li><a href="#" class="nextBtn" title="Next">Next</a></li>
                </ul>
            </div>
            <div id="thumbnails" spry:region="dsPhotos" class="SpryHiddenRegion">
                <div class="thumbnail" spry:repeat="dsPhotos"><a href="{path}"><img alt="" src="{thumbpath}"/></a><br /></div>
                <p class="ClearAll"></p>
            </div>
        </div>
        <div id="picture">
            <div id="mainImageOutline"><img id="mainImage" alt="main image" src=""/><br /> Caption: {pcaption}</div>
        </div>
        <p class="clear"></p>
    </div>
Any help with getting the caption to display would be greatly appreciated. The Caption {pcaption} does not work,

Photoshop cs4 makes huge files - but with Aperture Whats the biggest file ?

When editing w/Photoshop cs4 by adding layers and masks etc, This makes HUGE files - but with using Aperture alone, what's the biggest file size when editing a RAW file?? (??? _Kb ??? __ mgB ????)
I think I heard -12kb. True ?_________ From what little I understand. Aperture changes the pixels once you have finished the editing. Or to put it another away, Aperture replaces the old or original pixels with the edited final pixels you prefer. IE -lighter darker. and with that said. is this still a RAW IMAGE?

Hello, and welcome to the Discussions.
It would seem that none of what you report hearing is accurate. A RAW file downloaded into Aperture, remains as the Master for this image, and is never changed -- that is why Aperture is said to utilize non-destructive editing. When editing in Aperture, only a small file of edit detail is saved, and no actual new version needs to be created until you Export for some purpose.
When you send an image file from Aperture to Photoshop to be edited, it typically will be a version created as a TIFF file, although there are 4 choices in the Preferences -- TIFF, TIFF 16-bit, PSD, and PSD 16-bit. When finished editing, the image is Saved in PS, that file is available to Aperture, and the version created for sending to PS will change to reflect those changes made in PS.
Aperture cannot send an edited RAW file to PS in this fashion, but you can Export the RAW Master, to later be opened in Photoshop.
You should watch all the available online tutorials about Aperture, and possibly buy a book as well.
Aperture may have trouble with super-sized images, but I have not had trouble with those in the range of 100 MB or less. Larger ones than that would likely be from scans and not from editing an image shot with your camera in Photoshop.
Ernie

Need help using JTextArea to read large file

Hi here is the deal.
I've got a large file (about 12Mbytes) of raw data (all of the numbers are basically doubles or ints) which was formed with the ObjectOutputStream.writeInt/writeDouble (I say this to make clear the file has no ascii whatsoever).
Now I do the file reading on a SwingWorker thread where I read the info from the file in the same order I put it originally.
I need to convert it to string and visualize it on a JTextArea. It starts working. However a one point (56% to be exact since I know exactly the number of values I need to read) it stops working. The program doesn�t freeze (probably because the other worker thread froze) and I get no exceptions (even tough I�m catching them) and no errors.
Does anyone have any idea of what the problem could be?
Thank you very much in advance.
PD: I don�t know if it matters but I'm using ObjectInputStream with the readInt/readDouble functions to get the values and then turning them to strings and adding them to the JTextArea.

I can put up the code.
I don't have it with me right now but I'll do it later.
Thank you.
Second. I need to debug a function aproximation that uses a method that has to manage that many numbers. If I don�t put it into a txt and read it there is no way I will know where the problems are, if any. And yes I can look at the txt and figure out problems. It's not that hard.
What I'll try to do is to write directly to regular txt file instead of doing it to the JTextArea.
Thank you for your help and I'll post back with the code and results.
PD: I don't know what profiling is, would you mind telling me?

Error importing clip in iMovie, large file still exists somewhere

I'm running the newest version of iMovie and lately I've tried to import large clips from my camcorder only to result in an "Error" when importing. That's pretty annoying on its own, but to make matters worse, those extremely large files exist somewhere and I have no idea how to find or delete them. They don't exist in the iMovie Event folder that I created for them. Are they in some temporary folder? Because I've tried quitting iMovie and restarting my computer, but those 180GB that have been eaten up on multiple attempts are still missing.

I have the same issue so I called apple care and they were absolutely no help at all. 10.8, iMovie 11 (9.0.7), late 2011 Macbook Air.

Please help with opening old mac AE file on a pc

Hi,
With the latest version of AE on a pc I tried opening older mac version .aep file created I believe in 1999. I had very little hope so I wasn't surprised to see this message:
"After Effects error: this file was created with an older version of After Effects [3.0 (Macintosh PPC)], and can’t be opened. You can convert this file using an older version of After Effect and resaving."
It is not clear which version should be used, Pc or Mac, and if at the end that file could eventually be opened in thet latest AE on a pc.
I will greatly appreciate any help with this.

Thanks Mylenium
Rebuilding is not an option. It is a lot of work and I need this as a portfolio item. I created a promotional interactive CD with Macromedia Director in 1999 for a sign company. I created 19 short animations for it with After Effects 3 using old PPC Mac. I haven't used After effects since then but recently several new clients asked me if I can make animations from that nature. So, I'm trying to use my old work as a demonstration of my creative skills. The problem is that the animations were rendered tiny with 309 x 228 pixels to fit in the interactive interface of the presentation intended for the small monitors used at that time. I took the animations from the interactive CD and using the latest AE on a pc, I created a rough composition with running the animations one after another. To make the animations a bit larger I scaled most of them to 320 x 240 hoping it will look better.
In my archives I have the project files and all .ai vector graphics used for the animations. I still have the old PPC Mac retired somewhere in the closets and installer CD with After Effects 3 and 4. I thought it would be great if I can somehow open the files in the latest version on a pc but if not I guess I have to take out that old mac are render to higher resolution using this ancient machine and AE version. And I'm wondering if all this is worth it.
I will appreciate any tips, advices, things to be aware, etc, and how to make this looks better on YouTube.
Oh, and another question by the way, I haven't been current to the animation software for a long time and wonder if this kind of presentational animations are best suited for creating with Flash or After Effects is still OK?

Help with exporting Deski to text file via Web Intelligence

We are currently converting from BO version 5 to BO XI rev2. I have a report that must be scheduled to a flie in plain text format. I am using a deski report. When I save as to text, the file is fine. When I schedule it in webi, the file seems to be missing the end of line character for each row in the table, so it cannot be used for an import to another program. Can anybody help with this?-

well, in that case you need to determine if this issue only happens with a perticular report or all of them, if it happens only with reports imported from 5.x or with newly created reports as well.
Looks like it is happening only when report is exported from Infoview, not in the Deski client. This might indicate a problem at the Web Apllication server (tomcat or one you use).
If this issue is happening with any report - it might be a bug. In that case you have no options as there are no more patches for XIR2.
On the other hand - if all you need is to extract data for consumption in another tool , why not use Data integrator instead ?
Also, if this desn't work in Deski - does it work if you convert your reports to webi and export from those ?

Help with Aperture 3 printing to Epson R1800 please

No I haven't got the wrong forum, I think I will get the best answer here. I am a fully paid up member of the Lightroom 2 club and like to use both as I am sure others here do.
I cannot get a good print from Aperture 3, there is always a slight magenta colour cast. Prints from Lightroom and CS4 are perfect! And yes all settings are correct, I am not a beginer at this. This is with custom Permajet paper profiles and with Colormunki profiles. And as I have said prints from Lightroom and CS4 using a digital dog test print are spot on.
I remember back in earlier versions of Lightroom printing to the R1800 was problematic and the only way to get round this was to go into the ColorSync Utility and and under Devices and then the default Epson Media type, change the Current Profile to the paper profile that you wished to use. It now seems that this is also the only solution for A3. Doing this will give me an identical print to LR and CS4.
Now was this a problem with Lightroom or the R1800 driver? I am using the latest driver V6.23. Also I am using Aperture 3.0.2 and OSX 10.6.3.
I would be grateful for any help.

Hi Ian,
I am glad to hear you're getting good prints from LR and CS4. I am not aware of any outstanding issues with print color management in Lightroom (the print path is pretty solid and conforms to the OS requirements, and will perform correctly as long as the driver also conforms to the OS requirements; many recent drivers do, some older ones do not).
FYI, I understand you feel that there are forum participants here who may be able to help answer your question with Aperture. Though that may indeed be the case, that does not make it an appropriate use of this forum. (As an analogy, many forum participants here are also well-qualified to answer Photoshop questions, but Photoshop questions should be directed to the Photoshop forum, instead of here.)
Eric

Help with Aperture

Right now I only use Aperture to edit RAW files and export finished images to iPhoto for viewing purposes. Is it possible to have Aperture libray located on an external drive? is it possible to have multiple library?
In your opinion, which one is better for viewing and slide show purposes? Aperture or iPhoto?

Yes, your library can be located on an external
drive. Drag the library to the selected drive and it
will make a copy. Then go to preferences and select
choose and navigate to the new preferred location and
select. Yes you can have more than one library, but
Apple can only see oner at a time. You simply select
the one you want to work with using the methodology I
gave earlier. Aperture is far better at viewing and
managing your images. I also prefer the slideshow
feature.
Jeff
but..... I can't get slideshow in Aperture to play with music like iPhoto. Is there a way to do it? sorry... I just got Aperture a week ago

Elements 8 -help with outputting slide shows to File?

Can anyone help with saving a slide show in created in Elements to a file on my laptop? I know a WMV file is created, which option should I select to save in UK widescreen format 16:9?

Bob, thanks for prompt answer.
I am ultimately going to write the file to a DVD using Windows DVD Maker. Is the 16:9 format the DVD-PAL 720x576 option, or the High 1024x768 option?

Help with editing a template flash file..

FIRST OFF..please don't shoot the noobee..I know some folks
don't like the templates and I appreciate that.
I have done some reading but not a whole lot about Flash. I
certainly don't want to BUILD a flash (not yet), but want to edit
one that is included in a template. I only want to edit the header
that drops down. It says The Web STudio. I, for example, want it to
say Marks Studio.
Ok..the temp comes with Flash/non flash.
I open w/flash and have a 3 folders: flash, psd and html.
-flash folder has Images, fla doc and one flash html file
-PSD folder has 3 psd files
-html folder has flash folder, images folder, css file and
one single index.html file.
I opened the flash folder and found the image.jpg I wanted to
change to Marks studio.
I opend the PSD and found the slice that is the same as that,
then edited it like I want it in PSD, then saved to replace the old
image. top1. jpg
Still, it is the same ole one that came with the temp.
as I said, please don't shoot the noobe. I just wanna edit
the flash file.
Thanks for any help.
Mark

You'd need Flash to edit the FLA file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"snipingkid" <[email protected]> wrote in
message
news:enev5r$p8l$[email protected]..
> Hey guys,
>
> I need some help with editing a flash template, I have
the .swf, .fla, and
> .html file of this thing, I would like however to edit
something on it....
> Ive
> tried everything, I have access to photoshop and
dreamweaver 8... Im not
> any
> good at it but with decent help I could get something
done. What I would
> like
> to edit is just text that flies in.... I would like to
edit the text, how
> do I
> do it.... Thanksj
>

Help with fixing my iTunes - Corrupt File

I need help trying to correct the problem with my iTunes. I just installed the new iTunes update, iTunes 6.0.1, and now my iTunes isn't working properly. Everytime I open my iTunes, my library is gone. Luckily I saved my library before, but I don't want to keep reloading it over and over again when I open iTunes.
I keep getting a message saying, "iTunes.exe - Corrupt File" with a message saying "The file or directory C:\Documents and Settings\Username\My Documents\My Music\iTunes\Itunes Library.itl is corrupt and unreadable. Please run the Chkdsk utility"
I tried to repair iTunes, reinstalling it over and over again, and running the Chkdsk utility, but nothing works.
I am stumped and don't know what to do now.

hi Nick!
"iTunes.exe - Corrupt File" with a message saying "The file or directory C:\Documents and Settings\Username\My Documents\My Music\iTunes\Itunes Library.itl is corrupt and unreadable. Please run the Chkdsk utility"
good lord ... okay, if it's not a hard drive problem, let's try downloading some fresh definitions and doing vigorous spyware and virus scans.
does that show up anything?
love, b

Help with Aperture/T2i/iMovie/large file ( 2GB) issue.

Similar Messages

Maybe you are looking for