Help with apex 4.0 installation steps

i tried to install apex 4.0 running on my laptop with oracle 11g on windows7.
unfortunately i am stuck at a point it doesnot accept admin password.
the installation guide listed below is too unstructured and am not sure what all the components it require for apex running?
if anyone has list of software required and the steps (including pre-requisites) in the PROPER ORDER, PLEASE POST. Appreciate your help
It will be a quite bit of help. I have spent enough time on this but the document i found below for installation is not good. It is just my opinion.
http://download.oracle.com/docs/cd/B32472_01/doc/install.300/b32468.pdf
Edited by: rajugopalli on May 18, 2011 1:02 AM
Edited by: rajugopalli on May 18, 2011 1:03 AM

Hi,
If you like install Apex version 4, it might help and advisable if you read same version documentation.
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/toc.htm
Link you did post is release 3.0 document
Regards,
Jari

Similar Messages

Help with Adobe Reader update installation on mac book pro

am trying to update adobe reader 9.4.6 to the latest version on my mac book pro. Am able to download the updtae to 10. whatever and proceed with installation. At the step where I am asked to choose the adobe reader file, I select the file and then the process stops and I get a message that installation has failed and i am to contact the software manufacturer.

I figured it out. Thanks!
The key, during both life and death, is to recognize illusions as illusions, projections as projections, and fantasies as fantasies. In this way we become free.
Date: Mon, 10 Sep 2012 04:54:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with Adobe Reader update installation on mac book pro
    Re: Help with Adobe Reader update installation on mac book pro
    created by Nikhil.Gupta in Adobe Reader - View the full discussion
How exactly are you trying to update your Adobe Reader 9.4.6Try the following link to download latest Adobe Raeader: http://get.adobe.com/reader/
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4686315#4686315
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4686315#4686315. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help With New Hard Drive Installation Recovery

I had a bad hard drive crash. I installed a new one and got the bios to boot from the cd drive, with the windows 7
orginal install cd in the drive. It recognized Drive 0, I clicked new in the options. It created ONE System partition.
Installed windows 7 seemingly fine. Inserted the application and driver recovery disk and installed those. It all seemed fine. This morning I turned it on and it the hard drive error message (3F0) please install an operating system. I shut it down and restarted, it seemed normal. I installed a few programs, shut it down again. Returned to it later, started it up again and it took me to the diagnostic screen telling me SMART Check - Not Installed and Short DST - Not Installed.. Can someone tell me how to delete that partition and I can format the drive in a usb sata enclosure and start over again.
Please tell me the correct proceedure to get this laptop back up and running to a factory state. I have original Windows7 and Windows8 and Application and Driver disks for both OS'es.. I want to stay with the Windows7 installation.
Thanks for any help with this problem. I have no idea where I went wrong !
This question was solved.
View Solution.

It is not impossible that the new hard drive is bad, have seen it before. It is also possible that the sata controller on motherboard is bad-but I would look at that possibilty last. Can you get an exchange on the new hdd?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Need help with DM software install - installer thinks I have previous installation, but I don't

This is really frustrating me, but I recently uninstalled v4.3 and have been struggling to re-install ANY version of the DM onto my XP Pro machine. I have followed every bit of advice I can find including clean un-install / install, change the TEMP environment variable, unzip the installer and store locally, but I still can't figure this out.
I've been studying the installer log file, and I think this might be a clue:
InstallShield 14:12:58: Registering Msi Server...
MSI (c) (4C!DC) [14:12:58:742]: Note: 1: 2732 2: 0
InstallShield 14:12:58: Invoking script function RIM_CheckForDesktopDowngrade
RIM: Found existing DesktopMgr.exe at: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
RIM: Failed to retrieve version info from: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
InstallShield 14:12:58: CallScriptFunctionFromMsiCA() ends
MSI (c) (4C!DC) [14:12:58:774]: Leaked MSIHANDLE (55) of type 790531 for thread 3804
MSI (c) (4C!DC) [14:12:58:774]: Leaked MSIHANDLE (54) of type 790531 for thread 3804
Action ended 14:12:58: RIM_CheckForDesktopDowngrade. Return value 3.
MSI (c) (4C:40) [14:12:58:789]: Doing action: SetupCompleteError
Action 14:12:58: SetupCompleteError.
Action start 14:12:58: SetupCompleteError.
Info 2898.For Tahoma8 textstyle, the system created a 'Tahoma' font, in 0 character set.
Info 2898.For TahomaBold10 textstyle, the system created a 'Tahoma' font, in 0 character set.
Action 14:12:58: SetupCompleteError. Dialog created
It seems to think that I have a previous version installed in my Program Files, but no such executable exists (as I mentioned earlier, I have followed the clean install procedures more than once
Any ideas?
Message Edited by tbarcelo on 05-19-2009 02:21 PM
Solved!
Go to Solution.

Hi and Welcome to the Forums!
You say you followed the instructions for a clean install -- but what about a clean un-install? Those instructions are here...
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02206&slic...
Edit -- oh...and reboots...lots of them...one between each step...after an uninstall...after an install...etc.
Message Edited by sdgardne on 05-19-2009 11:09 AM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help with apex to ebusiness suite 11.5.10

Hello,
posted on ebusiness suite side, but they say to try here on apex side.
We are trying to follow the Cabot document found at
http://www.stuffspec.com/Read/_sp.d3d3Lm9yYWNsZS5jb20-sp..sltechnetwork.sl_developer-tools.sl_apex.sl_apex-ebs-wp-cabot-consulting-169064.pdf
but are having troubles just trying to get the ebusiness set up part done.
We are having troubles on page 5 of 8 where it talks about creating the plsql form function with the following attributes.
When we set the Properties/Type to be SSWA plsql function, it does not want to accept it and will not save as SSWA plsql function.
I have searched and read and followed so many links my head is spining. Has anyone else had this type of issue, and could tell us what we are doing wrong? Does the Cabot approach work for everyone, or is there another method that will work better?
We are using a stand alone apex server. We have a 11.5.10.2 e-bus suite which we use SSO for the hrSelfService. We are trying to add the new apex application to the hrselfservice menu. I following the Cabot white paper and I have created the procedure apex_launch as follows. I have some questions about it that are inline:
PROCEDURE APPS.apex_launch (
application IN NUMBER
, page IN NUMBER DEFAULT 1
, request IN VARCHAR2 DEFAULT NULL
, item_names IN VARCHAR2 DEFAULT NULL
, item_values IN VARCHAR2 DEFAULT NULL)
Is
Begin
OWA_UTIL.mime_header('text/html', false); ---- Is the url correct? Since my apex server is separate, do I need the APPS_FRAMEWORK_AGENT???
OWA_UTIL.redirect_url( ---- Do i need to create a DAD for pls/apex?
'https://ourserver.school.edu/pls/apex/f?p='||
application||':'||page||'::'||request||':::'||
item_names||':'||item_values);
End apex_launch;
I created the form function with the following attributes:
Properties/Type -> SSWA plsql function
Web HTML/HTML Call -> apex_launch
Form/Parameter -> application=310
I am able to save the plsql form function with no errors. However, when i go back in to look at the form function: property type, it is set to "database provider portlet". (I have opened an SR on this issue and as yet, i don't have a solution.)
I then add the new form function to the hr self service menu. When I go into self service, the new function does not display.
If I change the property to SSWA plsql function that opens a new window (Kiosk mode) and save the form function and don't change anything else, when I go into self service the new function displays. However ,when I click on it, it opens another e-bus suite logon page. After entering the username/password it just brings up the ebus suite application, not the apex application.
Can anybody help me? thanks.
Thank you,
Mark

Hi Mark,
Nope, that is the one of the issue im facing still that is the single sign on(even if i integrated APEX with EBS R12), im having issues with that.
It is asking two login credentials for me
<li>one is Ebs login credentials
<li>The other one is Apex Login credentials.
Soon after logging into the ebs, if i clicked the APEX menu means, the APEX login page is appearing.
If it is SSO means, the APEX login page should not appear soon after clicking the APEX menu in the EBS.
How to pass my APEX login credentials to the EBS, so that i can enter into my APEX application (via) EBS only with the EBS login page. Soon after entering into the EBS login page into the application. While if i clicked the APEX menu means, i need to navigate directly to the APEX Application page. And APEX login page should not appear.
Thanks
Regards,
Mini

Help with APEX.COLLECTIONS in v. 3.2

Hello, we are trying to create an apex.collection in our program similar to the one used in the sample application "Matrix Order 1.0"
Working Code used in "Matrix Order 1.0" is as follows:
if APEX_COLLECTION.COLLECTION_EXISTS (p_collection_name => 'MATRIX' ) then
APEX_COLLECTION.DELETE_COLLECTION (p_collection_name => 'MATRIX' );
end if;
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY(
p_collection_name => 'MATRIX',
p_query => 'select PRO_STYLE,PRO_COLOUR,PRO_UNIT_PRICE,S,M,L,XL from MATRIX_PRODUCTS_BY_SIZE order by 1,2,3' );
What we've tried in ours is as follows:
if APEX_COLLECTION.COLLECTION_EXISTS (p_collection_name => 'TRAINING' ) then
APEX_COLLECTION.DELETE_COLLECTION (p_collection_name => 'TRAINING' );
end if;
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY(
p_collection_name => 'TRAINING',
p_query => 'select * from IDEAS_USERS_VIEW' );
End result is a message stating "no data found"
Any thoughts?
Additional information:
we've tried above creating a view from a table, we've also tried putting the table name right in the query field - same results.
we've also tried several over variations of the code found on the web such as the following:
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY(
p_collection_name => 'TRAINING',
p_query => 'select * from IDEAS_USERS_VIEW' ,
p_generate_md5 => 'NO' );
Again - same result - "no data found"
Please Help!

My teammate figured it out.
the problem was under the Conditional Processing section they had the following set:
Condition Type = "Request = Expression 1"
Expression 1 = NEW
Solution was to set to "No Condition" and deleted the value of "NEW"
I'm sure we'll be back soon with questions on how to update and store it.... stay tuned.

Help with NWDI Software Component Installation on CRM 5.0?

Hello,
We are currently running CRM 5.0 on Windows Server 2003 with MS-SQL Server. While installing CRM 5.0 we didn't select the DI (NetWeaver Development Infrastructure) software component as we didn't expect earlier to do any Java development. Now, it seems that for E-Commerce enhancements and development we must have NWDI. I have already checked the NW7.0 Java Installation on Windows guide and couldn't get much information on NWDI software component.
Can anyone please guide on the steps for installing NWDI on our CRM Box? Also, any idea on approximately how much space would this require for CRM System?
Thanks and Regards,
Vasu

run netweaver 2004s installation master CD. under that select SAP CRM5.0 Suppoty release-> SAP Systems-> sql-> Central system. select custom installation-> you get ERP 2005 Software units.
under that select the DI option and continue.
Regards,
Mahesh
select sql-server instead of oracle.
Edited by: Mahesh Kumar Sutrave on Feb 15, 2008 7:02 AM

Help with Adobe Flash Player Installation

I need help. I have tried several time to download Adobe Flash Player to my computer. But when I get to about the 50% point of the installation I get a message that says "Please close the following programs to continue.....and a small box appears with the words "internet explorer". I make sure that I am not on the internet (close internet explorer by clicking the X in upper right corner), and then hit the RETRY button....but the same message keeps appearing. What do I need to do to at this point so I can complete the installation? Even though I know that the internet is not open...what can I do to make sure that Internet Explorer is not open?

You need to close all iexplore.exe instances; use the Task Manager's Processes tab.

Help with Apex.

Hi, i work with Oracle XE and Apex 2.1.0, i need generate reports using Word Documents,
i need create the reports, based in template of Word, my question is:
How create a new Word Document based in template and store in the field BLOB type?
Can i have using PL/SQL PROCESS?
And finally, how open the Word Documents from Apex? One example please.
Thank.
Roberto.

Hi, have a problem to open documents Word:
My table is:
file_subjects;
NAME .............................VARCHAR2(4000)
SUBJECT.........................VARCHAR2(4000)
ID.....................................NUMBER
BLOB_CONTENT..............BLOB()
MIME_TYPE.....................VARCHAR2(4000)
...i created a report with column link , call to procedure DOWNLOAD_MY_FILE as URL:
#OWNER#.download_my_file?p_file=#ID#
My store procedure is:
create or replace
PROCEDURE download_my_file(p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content)
INTO v_mime,lob_loc,v_file_name,v_length
FROM file_subjects
WHERE id = p_file;
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
end download_my_file;
....i clicking on column link, generate the error:
Forbidden
The requested operation is not allowed
Help me, please.
Roberto.

Oracle SQL Newbie need help with OE Demo Schema Installation

Hello everybody !
I'm hoping some kind soul can help out this SQL newbie.
First of all i've installed 10g R2 database on a PC running XP SP2.
Oracle is installed on the root C: drive
I'm using the SQL Fundamentals I Exam Guide and DBA Handbook (Both Oracle Press)
as my reference.
My problem is this.
I installed the DB and created the demo HR schema without too much problem
but it's the demo OE schema i'm having problems getting running and cannot
find anywhere on the net that outlines a step by step SQL process.
I am using SQL Plus to execute these commands.
My questions are these:
-For the default tablespace i specify "users" ?
-What do i specify for the temporary tablespace ? "temp" ?
-what directory path do i put for the data files as parameter 6 ?
I put down "C:\oracle\product\10.2.0\db_1\demo\schema\order_entry" but i suspect it's
the wrong thing ?
-What do i specify for the writable directory path for the log files ?
Is it C:\oracle\product\10.2.0\RDBMS\log
-And what is "Specify version as parameter 8:" line ?
I assumed it was the db version but i believe it's wrong.
Could somebody please help me ? I've already done my CCNA and i wanted to add oracle under my belt.
I know if i had these few things cleared up for me it would pave the way to actually enjoying learning Oracle :)
Thank you for any assistance :)

I installed the DB products from the companion disk and there was no specific mention of the demo schemas. Regardless... They're all there within the demo subfolder and have already created the hr schema.. I just need somebody (I'll pay if necessary) to PLEASE just answer (what would be easy to you guys my questions so i can move on.
this is a cap from my sql plus..
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jun 14 15:01:29 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> alter user oe account unlock identified by oe;
User altered.
SQL>
specify password for OE as parameter 1:
Enter value for 1: mewfymewf
specify default tablespeace for OE as parameter 2:
Enter value for 2: users
specify temporary tablespace for OE as parameter 3:
Enter value for 3: temp
specify password for HR as parameter 4:
Enter value for 4: mewfymewf
specify password for SYS as parameter 5:
Enter value for 5: mewfymewf
specify directory path for the data files as parameter 6:
Enter value for 6: C:\oracle\product\10.2.0\db_1\demo\schema\order_entry
writeable directory path for the log files as parameter 7:
Enter value for 7: C:\oracle\product\10.2.0\db_1\RDBMS\log
specify version as parameter 8:
Enter value for 8: 10.2.0
User dropped.
old 1: CREATE USER oe IDENTIFIED BY &pass
new 1: CREATE USER oe IDENTIFIED BY mewfymewf
User created.
old 1: ALTER USER oe DEFAULT TABLESPACE &tbs QUOTA UNLIMITED ON &tbs
new 1: ALTER USER oe DEFAULT TABLESPACE users QUOTA UNLIMITED ON users
User altered.
old 1: ALTER USER oe TEMPORARY TABLESPACE &ttbs
new 1: ALTER USER oe TEMPORARY TABLESPACE temp
User altered.
Grant succeeded.
Connected.
Session altered.
Session altered.
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/coe_10.2.0"
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/loe_10.2.0"
SP2-0310: unable to open file "C:\oracle\product\10.2.0\db_1/demo/schema/order_entry/poe_10.2.0"
Session altered.
...creating subschema OC in OE
Type created.
Type body created.
Table created.
FROM inventories i, warehouses w
ERROR at line 6:
ORA-00942: table or view does not exist
FROM product_information p
ERROR at line 10:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM customers c
ERROR at line 20:
ORA-00942: table or view does not exist
FROM orders o
ERROR at line 9:
ORA-00942: table or view does not exist
ON oc_orders FOR EACH ROW
ERROR at line 2:
ORA-00942: table or view does not exist
TABLE order_item_list OF oc_orders FOR EACH ROW
ERROR at line 2:
ORA-00942: table or view does not exist
Commit complete.
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 5:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
FROM oc_product_information o
ERROR at line 4:
ORA-00942: table or view does not exist
1 row created.
1 row created.
1 row created.
1 row created.
Type altered.
3 rows updated.
0 rows updated.
0 rows updated.
0 rows updated.
Commit complete.
Type body altered.
Type body altered.
Type body altered.
PL/SQL procedure successfully completed.
SQL>
Like i can figure out that the "version in parameter 8" has something to do with the coe, poe & loe files
but i don't know what.
If somebody can please help me with my questions then i know i can move on.
Thanks
Edited by: user11216992 on Jun 14, 2010 3:37 PM

Need help with apex listener administration username & passwd

Hello,
I downloaded apex ODD and tried to lunch listener admin http://localhost:8888/apex/listenerAdmin
Please help me the username and password.
Thank you very much.

Hailt wrote:
Hello,
I downloaded apex ODD and tried to lunch listener admin http://localhost:8888/apex/listenerAdmin
Please help me the username and password.
Thank you very much.1) To not attempt to eat a listener. It is not good for you.
2) Are you sure you are in the right forum for this? (You may be .. but you may well not be) ... if ODD is open developer day the information on passwords is usually in the installation instructions.
.. i cant recall having to worry about apex listeners, but i havant used the latest versions ...
The main purpose of the post way to correct your possible eating disorder.

Help with LR 5 disk installation

Hi, recently I downloaded a trial of LR5 now that's finished and the develop module is disabled. In this trial period I got a LR5 disk with a new camera purchased so I've also loaded this into my new iMac. Now I need to be able to add my licence number into LR so that I can continue with it but I can't find anywhere to do this as it doesn't seem to recognise my disk version. Please can someone help me sort this out. Thanks

is lr 5 installed?
if so, open your lr 5 trial>click help>activate>enter your serial number and proceed.

Need help with SB X-FI installation

I just got my SB x-fi I cant figure out how to install it. I have a MSI K8N Neo4 motherboard. It uses the nforce4 chipset and I have gig of cruical ram, and a AMD athlon 64 3.0 cpu. I have a WD raptor 40g, and a seagate 300g. The only other thing i have in the computer is a dvd rom dri've. anyway the problem:
With the card installed I get a error message on boot up:
warning: Have option ram cannot be invoke (vendor ID: 000....
The warning goes on but thats the jist of it.
The mobo has onboard audio but I have disabled the only thing I could find in the bios relating to audio. (all that i could find at least) I have tried the card in the 2 and 3 pci slots but same thing happens. I havent tried the st pci slot becuase the PCIE slot with the video card blocks the st pci slot.
I have also deleted and disabled all the onboard audio stuff in windows, but nothing changed.
Any help would be appreciated.
thnx

In the Knowledge Base, it says you can have problems with nForce4 motherboards, and suggests that updating the BIOS will solve the problem. Howver, I've got a Gigabyte nForce4 board, updated to the latest BIOS, and no go. Looks to me that the X-Fi and the nForce4 don't play well together.

Help With apex.server.process

Hello,
I am trying to use the new apex.server.process function to and I seem to be having some issues with it. The call itself seems to be working fine as in firebug it returns what I expect. Its just that I am returning the json string into an object and that is what is causing the problem.
Here is my on-demand process:
DECLARE
lv_json             VARCHAR2(4000 CHAR);
lv_score            NUMBER(12);
BEGIN
    --Will get the score from the database...
    lv_score := round(fm_apex.events_api.get_percent_complete(:P40_EVENT_ID,'TOTAL'));
    IF lv_score = 100 THEN
      lv_json := '{"success":true}';
    ELSE
      lv_json := '{"success":false}';
    END IF;
    htp.p(lv_json);
END;
And this is my javascript function:
function checkScore(pThis)
    var getScore = apex.server.process(
        'IS_SCORE_COMPLETE_JSON',
            pageItems: "#P40_EVENT_ID"
    if ( eval(getScore.success) ) {
        alert('This is successful');
        //doSubmit(pThis.id);
    } else {
        openModal('notScoredFully');
What is happening is when the response is {"success":false} and in firebug it is still evaluating it to true? Can anybody see what I am doing wrong?
Cheers,
Paul.

1/ apex.server.process is asynchronous. You are handling it as if it is not. You fire the call and it is gone, unlike htmldb_get which works synchronously (=makes the browser wait for the return). You need to use the success function.
JavaScript APIs apex.server.process
The return value of the server.process call is a jqXHR object, documentation on which you can find here: jQuery.ajax() | jQuery API Documentation
I would just use success though, as demonstrated in the example of the documentation.
apex.server.process ( "MY_PROCESS", {
x01: "test",
pageItems: "#P1_DEPTNO,#P1_EMPNO"
success: function( pData ) { ... do something here ... }
Thus something along these lines:
apex.server.process(   'IS_SCORE_COMPLETE_JSON'
                     , { pageItems: "#P40_EVENT_ID" }
                     , { success: function( pData ) {
                                    if(pData.success){
                                      alert('This is successful');
                                    } else {
                                      alert('This is NOT successful');
2/ apex.server.process by default handles the return value as a json datatype. You would not need to "eval" it.

Request for help with apex page popup on button press.

Apex 3.2/Solaris 10
I'm attempting to open an apex page (report) in a popup window when a button is pressed following the plethora of examples in the forum.
I've applied the following in "Edit Page Buttons" to either of "Button Attributes" and "URL Target" trying to open my report (page 14) in a popup window.
javascript.popupURL('f?p=&APP_ID.:14:&SESSION.');
javascript.popup2('f?p=&APP_ID.:14:&SESSION.');
window.open('f?p=&APP_ID.:14:&SESSION.');
I've also implemented the conditional branch for this button to alleviate the "page not found - restart application" error.
The window.open variant does not work. The 2 javascript. variants open the page, but in the same window (no popup).
also I've read that in order to close my pop up report (should it be working), a window.close(); should be issued somehow associated with a close button on the popup page. Specifically, where would this code be placed?
Thank you!
Paul

Paul:
Specify the URL as
javascript:popupURL('f?p=&APP_ID.:14:&SESSION.');
instead of
javascript.popupURL('f?p=&APP_ID.:14:&SESSION.');
Varad

Help with apex 4.0 installation steps

Similar Messages

Maybe you are looking for