Help with Archive and Install

Hi, I just archived and installed OS X today 10.5 and I noticed that there's a folder called previous system. This folder has the same applications that I have on the new applications folder, for example, I had two versions of iTunes, the new one would not read the library so I deleted it and moved the older one to the new applications folder. My question is: Is that folder really necessary? Because it has the same applications that I have on the new one and it's taking up disk space. Is it Ok to delete? or should I just leave it alone?
Thank You for your time

if all your apps are working normally you can safely delete that folder. it's left there just in case something didn't migrate properly.

Similar Messages

Need help with archive and install

I'm doing and archive and install. The first try was with a defective retail version of OS X Tiger, which did part of the job then stalled. Now I've been able to get a good DVD of this and was able to do an archive and install,although I couldn't check the box to save user settings etc., On the screen it gives me 3 options transfer info from another mac, transfer info from another partition on this mac or do not transfer my info. I'm new to all this, because of the first failed archive and install do I transfer the info from another partition or not transfer at all and find the old folder later on in the process?

Hi D,
I couldn't check the box to save user settings etc.
I think that is due to the partial previous install moving things to a Previous System folder, but not finshing.
Let's see if that's what happened... if you have 2 Macs with Firewire this could be a lot easier.
Oh, do you have a Backup?
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
After quitting DU, look for Terminal in that Menu Bar, open that and type in this...
Wait, let's hear if you have another Mac or Boot Disk first...

Problem with Archive and Install - Second disc won't complete

I'm trying to run an archive and install for my iMac, OS 10.4.11. I get through the first disc fine, but after I put in the 2nd install disc, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs Installer Script". it says less than a minute remaining, and the downloading bar is swirling, but there is nothing happening and it hangs here for hours. I've tried reinstalling, but it will only ask me to load the 2nd disk again, and the same thing happens over and over. I even tried a different install disc 2, and the same thing happened. Is there a way to push past this, or start the entire archive and install again? when i reboot to the disc drive with the 1st install disk, it ask me to put in the 2nd disc.
This all started because iTunes was acting up after I got an ipod touch, no prior problems with the computer. Can anyone help?

I've seen this reported before. What some have had some success with is to do a custom install so the second disk is not needed. See BDAqua's tip to someone with the same issue in the Tiger forum.
http://discussions.apple.com/message.jspa?messageID=9959537#9959537

Trouble with Archive and Install of Tiger 10.4.6

During a Software Update of QuickTime 7.5 I ran into multiple problems:
1. Iphoto would not import from any souce.
2. Safari quit when I used the Bookmark menu.
3. Itunes won't show any graphics.
4. Others I haven't run into yet?
I tried repairing permissions, then I downloaded the Quicktime 7.5 and tried to install, the installation quit.
I tried re-installing Iphoto from my ILife 06 disk, still could not import.
I tried to do an Archive and Install from my Tiger 10.4.6 DVD, the installatiion quit, said retry. I repaired permissions using the Tiger install DVD, the tried to do an Archive and Install again, but it quit during the installation.
Any thoughts would be appreciated.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
How much free space do you have on what size HD?

Please help with erase and install

I have been having major problems lately with my Leopard upgrade which I did once Leopard first came out.... Ran good for a while but now it locks up all the time and force quit does nothing... At first I did an Upgrade from Tiger but now I want to do an erase and install...
Can someone run me through using Time Machine to backup my existing drive for my Applications I have like CS3 and Quark etc...
My main question is... after running TM and having a copy of my existing hard drive.. once I erase and install Leopard can I just tell TM to put certain files back on but leave the NEW Leopard install clean?
Thank you in advance,
Marc

If you are going to go to the extreme of doing an Erase and Install, then do it right and also re-install all your third-party software. This will assure that you won't have problems caused by damaged components or files belonging to your third-party applications. Just backup your personal data files, pictures, music, etc. which you can do by copying them to your backup drive.
If this isn't feasible then rather than an Erase and Install do an Archive and Install:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Help with downloading and installing Flash Player into new Mac OS

After spending hours installing and uninstalling flash player into my new (I have had it for 5 days) macbook pro, I need your help.
I have MAC OS Snow Leopard 10.6.4 64 bit
My web browser is Safari 5.0.2 ( i couldn't find whether it is 32bit or 64 bit.
Flash player version is 10.1
The flash player installer is in the applications folder and it says that it has succeeded to install, however it has not installed.
Tried heaps of times to install.
Please help

Hi minnie,
Look into the HD/Library/Internet Plug-ins/ directory and see if you have the below two files:
Flash Player.plugin
flashplayer.xpt
Cheers
--Vikas

Video podcasts won't play after archive and install

I'm one of the folks having capture issues with FCP 4.5 and OS X 10.4.9. So I decided to archive and install to 10.4.8. Now it seems I'm having all kinds of video problems, including downloading and playing video podcasts in iTunes (7.2). When I download a podcast, say "Tiki Bar TV", the file downloads, but in the podcast screen, I get an error message which reads,
"There is a problem adding the video to iTunes. The file might be corrupted, or a file type that iTunes cannot play." For the record, I have never run into anything like this before. And it's the same way with every video podcast.
I had some similar wonkiness going on with QuickTime, too. But after I installed a divx plug-in, and flip for mac, everything seems to be okay with the QT. iTunes is still a mystery. Any ideas on what my next step should be would be appreciated.
Thank you.
Ben
PowerMac G5 Dual 2.5Ghz Mac OS X (10.4.8) 3GB RAM, 500GB hard drive, ATI9800XT

There are files that are not brought along with Archive and Install.
Some are invisible and not accessible without enabling "root" access and even then you have to know exactly which files have to be moved from the 'previous System' folder.
Archive and Install never works with Apple's Pro apps.
If Niel's suggestion doesn't work you'll have to erase your hard drive and reinstall everything making sure you first backup important data to another hard drive.
(don't forget to save your mail and addresses)

FCP won't launch after Archive and Install

After the fiasco of the 1.1 update for the Alu-iMac's I had to do an archive and install on my system to return it to 1.0.
Everything is now working fine but FCP6 won't launch. It bounces in the dock once and then nothing. LiveType and DVD Studio 4 will open but Color, Motion and FCP won't.
I have trashed preferences and repaired permissions with no luck.
Any ideas?
Thanks in advance.

There are files that are not brought along with Archive and Install.
Some are invisible and not accessible without enabling "root" access and even then you have to know exactly which files have to be moved from the 'previous System' folder.
Archive and Install never works with Apple's Pro apps.
If Niel's suggestion doesn't work you'll have to erase your hard drive and reinstall everything making sure you first backup important data to another hard drive.
(don't forget to save your mail and addresses)

Need help with frozen Archive and Install

I'm trying to run an archive and install for my intel iMac, OS 10.4.11. I get through the first disk fine, but after I put in the 2nd install disk, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs Installer Script". it says less than a minute remaining, and the downloading bar is swirling, but there is nothing happening and it hangs here for hours. I've tried restarting, but it will only ask me to load the 2nd disk again, and the same thing happens over and over. Apple even sent me a new install disk 2, and the same thing happened, so I know it's not the disk. Is there a way to push past this?
I did a disk utility repair and it said everything was fine.
WZZZ suggested a custom installation, but I haven't tried it yet because I'm worried I might lose the data on my hard drive. (Stupidly) none of it is backed up. Any advice? Do you think I'll lose my data if I force it start over with disk 1 and do a custom install?
If not, is that the best thing to do?

Hi there, WZZZ is one sharp guy, go for it, (known him since he was knee high to a Grasshopper!
Do you think I'll lose my data if I force it start over with disk 1 and do a custom install?
At worst we should maybe only have complications with several Previous System Folders, but after forcing shutdown reboot do what WZZZ pointed to...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
http://support.apple.com/kb/HT1442

I need help to recover/relink mail after archive and install

I am helping my friend fix her 15" G4 PowerBook after memory failures caused many crashes. There was no recovering short of a reinstall via "archive and install". All that worked great, but now Mail doesn't recognize the accounts, mailboxes, signatures, etc. that are still located in the user/library/mail folder.
What's up with that? I can't figure out how to relink Mail to this stuff.
Here's more detail:
1) After lots of prior debugging (Disk Utility, Disk Warrior, Apple Hardware Test, single-user commands per Apple tech notes), I did the A&I to 10.3.4 from the original disks.
2) Per Dr. Smoke and The X Lab, I ran the 10.3.9 combo installer right away so that the "older" system would not get confused by the "newer" stuff in the Previous Systems folder.
3) I Launched Mail and it started anew, i.e. didn't recognize accounts and wanted to start over.
Thanks for any help.

The account settings are stored in HOME/Library/Preferences/com.apple.mail.plist. It looks like that file became corrupt -- maybe its permissions went awry (Disk Utility cannot fix that) and Mail just deleted the file to create a new one.
If your friend doesn't have a backup copy of that file, just set up the accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don't. Just enter the account information and Mail will automagically rediscover the data in HOME/Library/Mail/ when done.
You'll also have to re-configure most settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it's enabled.

I did and Archive and Install on MBP with 10.4.11...now what?

I recently performed an "Archive and Install" on my MBP that was having odd random shutdowns (not battery related). Just prior to this I used DiskWarrior 4.0 to fix errors to try to possibly cut down on the shutoffs. All it did was f**k up my machine so bad that as soon as the grey screen and apple logo came up, it was like this grey curtain went down and an "on/off" icon came up saying I had to restart. I was never able to boot my machine off my hard drive again until i did the archive and install. Everything seems fine now.
My question is, I want to get the "old system" folder off my HD since it's taking up a lot of room. how do I know what files are critical and what ones aren't? I copied over my printers folder but all my other data seems to either be where it was before or it got moved over during the archive and install.
Any help on what i HAVE to save before i trash the old system?
Thanks!

Cool, that was my first guess as to what to do. But now the old lockup issue has returned. I had put my MBP to sleep for an hour or so. When I came back up from sleep mode, I got the black box in the middle of the screen with the "on/off" button and the message that I had to restart or shut down. On restart when I clicked "report", the following came up in the box:
panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x017b6900, CR3: 0x00e1a000, CR4: 0x000006e0
EAX: 0x01610000, EBX: 0x017b6900, ECX: 0x00000420, EDX: 0x00000000
CR2: 0x017b6900, EBP: 0x25153c38, ESI: 0x00001000, EDI: 0x00000000
EFL: 0x00010202, EIP: 0x0017eaa9, CS: 0x00000008, DS: 0x03860010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x25153a18 : 0x128d0d (0x3cc65c 0x25153a3c 0x131f95 0x0)
0x25153a58 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
0x25153b68 : 0x19b3a4 (0x25153b80 0x18c296c 0x0 0x0)
0x25153c38 : 0x15df65 (0x423d220 0x1000 0x0 0x14185d)
0x25153c88 : 0x16214b (0x3f953e8 0x1801000 0x0 0x25153df4)
0x25153d28 : 0x16e29d (0x3f953e8 0x25153df4 0x3f909f8 0x1801000)
0x25153e78 : 0x37558d (0x1803000 0x0 0x3 0x0)
0x25153eb8 : 0x3481e9 (0x1801600 0x0 0xb88 0x0)
0x25153f58 : 0x37b300 (0x3fb67d0 0x48469a0 0x48469e4 0x0)
0x25153fc8 : 0x19b77e (0x483eea0 0x0 0x19e0b5 0x4133348) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0080be8
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacBookPro2,2, BootROM MBP22.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.2.2
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
Parallel ATA Device: MATSHITADVD-R UJ-857D
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Primax Electronics, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
Any ideas on what's causing the error, or is this the same one that i see posted all over this site with no resolution either from Apple or anyone else?

Help with archive & install

Aloha!
I hope someone can help me since I've been searching and reading these discussions all day and haven't found the answer to my problem.
I updated my OS to Leopard 10.5 and began experiencing problems. I did a archive and install back to Tiger 10.4 and now don't know how to restore all the user files in the "previous system folder". I've read the Apple article on restoring after archive and install but I don't understand the whole instructions. I tried creating a new user (with same short name and password) and created a .dmg file of the previous system user folder using disk utility. After copying the files, it doesn't allow me to open the applications. It says I don't have sufficient access privileges. I can't confirm if the file transfer was successful. I'm totally lost and confused. Any help will be appreciated.

Which article was that please?

Archive and install help snow leopard 1.6.5

I've a macbook pro 2009 mid year model.
and i accidentally deleted this adobe air and after reinstalled..it was corrupted and my friend borrowed my mac...and he installed those cracked photoshops. and i now i want to get them off my computer.
I'm thinking about reinstalling the Mac OS? with a clean fresh one. but i don't want to lose all my iphotos, imovie, calendars, itune, music, movies and the photos in photo booth. is there anyways to keep them? I'm going on a trip really need to get it done in 9 more days.
I've read some forums about Archive and install ? but I've tried youtube for some tutor how to make a Archive and install ? but i couldn't find anything. or websites. please help me up.
my questions is pretty much. how do i make an Archive and install on my macbook, snow leopard 1.6.5 or keep every files, so i can reformat my macbook pro. (planning to update to the 1.6.6 after everything is done like reinstalled mac osx.)
cheers

Snow Leopard no longer has Archive and Install. To keep your user data, clone backup your machine at least twice, and restore only the data you need after an erase and install.
Report your "friend" to http://www.apple.com/legal if you suspect them of having put illegal software on your machine. You don't know what else they might have messed up..

Archive and Install of OS X. Help!

My macbook has been stuck at the loading wheel and grey screen for a couple weeks now. I've tried a series of things from re-setting the PRAM and SMC, to booting with the install disc and running the DU, verified and ran disc repair and permission thing. Now that these haven't worked I'm attempting to archive and install, but after i select my language after booting up from the install disc it tells me i can't install OS X. Supposedly this is where you would pick a destination for where you want to install, but it seems I'm kind of stuck. Any help would be much appreciated!!!

Right after I boot from the install disc, I get to the select a language screen and hit the arrow to continue, then a box appears saying "preparing to install" followed by the box disappearing and the message "Mac OS X cannot be installed on this computer. The software can not be installed on this computer."

HELP! I tried archive and install

I posted this earlier :
HELP! macbook problems
Posted: Oct 15, 2008 2:27 PM Reply Email
i need help. onbe day my macbook worked and the next it wouldnt. I would turn it on and it would sound like it was starting up but only display a white screen. after awhile, it would display a flashing folder with a question mark. so i put it away until i could fix it. when i took it out, it started up with my installation disk in it and went to the install. when i go through the steps, it says selct install destination and no icons pop up. it actually went into installation once but i did not hasve the other disk and could not finsish it (i thinkit froze anyways) does anyone have any ideas what to do? thanks so much! its a macbook osx but im not sure the number (10.5, 11 etc..)
I was told to do an archive and install which i tried. My computer keeps freezing, but my smart is verified and i tried to fix problems and it says there are none needing to be fixed. When i go back to install, it let me once and froze. After that, when i would try to click where to install, no icons pop up to install. I tried to erase everything to zero and it freezes. What do i do? Thanks so much!

Take it in for repair. You likely have some other, probably hardware, problem.

Help with Archive and Install

Similar Messages

Maybe you are looking for