Help with Audigy2 ex ext. I/O bo
Maybe someone can help!?!?!?
I have a SB audigy2 EX card install it works fine. But I cannot get the ext. I/O box to work no power light (nothing).... I checked the power supply to the audigy card with a multi. Meter, the power is fine . I had a SB Li've MP3+ installed before and it work fine. When i installed SB Audigy 2, uninstalled the SB Li've software & drivers . Any one with any suggestions I would be happy to hear from you !!!!
Anybody have any ideas?
Similar Messages
-
I downloaded Flip4 and Divx but still cannot videos with the following ext: wmv, avi and asf can anyone help
Try Perian and VLC.
-
Help With Crash Code In PRE8 Please
In an interest to turn some of my recent discussions in a more positive direction and in keeping with the primary function of this forum (seeking advice and solutions) and in a further effort to not continually ***** about PRE8, can someone please help with and interpret the following crash codes recently generated by PRE8?
Thanks in advance for any help.
Glenn
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangXProcB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: ba8e
Hang Type: 32
Waiting on Application Name: ElementsOrganizerSyncAgent.exe
Waiting on Application Version: 8.0.0.0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2: 84f3
Additional Hang Signature 3: f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4: ba8e
Additional Hang Signature 5: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6: 84f3
Additional Hang Signature 7: f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID: 749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangXProcB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: ba8e
Hang Type: 32
Waiting on Application Name: ElementsOrganizerSyncAgent.exe
Waiting on Application Version: 8.0.0.0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2: 84f3
Additional Hang Signature 3: f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4: ba8e
Additional Hang Signature 5: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6: 84f3
Additional Hang Signature 7: f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID: 749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangXProcB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: ba8e
Hang Type: 32
Waiting on Application Name: ElementsOrganizerSyncAgent.exe
Waiting on Application Version: 8.0.0.0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2: 84f3
Additional Hang Signature 3: f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4: ba8e
Additional Hang Signature 5: cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6: 84f3
Additional Hang Signature 7: f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID: 749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: af71
Hang Type: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: 37a5e7ba79ac8a533571e7d8f2e8acd0
Additional Hang Signature 2: d900
Additional Hang Signature 3: 431be4795d1c061aba02734aa57c4950
Additional Hang Signature 4: af71
Additional Hang Signature 5: 37a5e7ba79ac8a533571e7d8f2e8acd0
Additional Hang Signature 6: d900
Additional Hang Signature 7: 431be4795d1c061aba02734aa57c4950
Extra information about the problem
Bucket ID: 811067413
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name: AppHangB1
Application Name: Adobe Premiere Elements.exe
Application Version: 8.0.0.0
Application Timestamp: 4aa5c87c
Hang Signature: 7008
Hang Type: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: f0af3d01fb74f43241231d4e61778ffa
Additional Hang Signature 2: 0fb3
Additional Hang Signature 3: a5f1d311bc7bfa26f067b42cbdeac6af
Additional Hang Signature 4: 7008
Additional Hang Signature 5: f0af3d01fb74f43241231d4e61778ffa
Additional Hang Signature 6: 0fb3
Additional Hang Signature 7: a5f1d311bc7bfa26f067b42cbdeac6af
Extra information about the problem
Bucket ID: 781893170Here are my system specs. Let me know if you need anything else.
Thanks
Glenn
Operating System
MS Windows Vista Ultimate SP2
Installation Date: 06 March 2009, 02:58
Intel Mobile Core 2 Duo T9550
Cores 2
Threads 2
Name Intel Mobile Core 2 Duo T9550
Code Name Penryn
Package Socket P (478)
Technology 45nm
Specification Intel Core2 Duo CPU T9550 @ 2.66GHz
Family 6
Extended family 6
Model 7
Extended model 17
Stepping A
Revision E0
Instructions MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
Bus speed 266.0 MHz
Rated Bus speed 1064.0 MHz
Stock core speed 2666 MHz
Stock bus speed 266 MHz
Average Temperature 36 °C
Cache
L1 data cache size 2 x 32 KBytes
L1 instructions cache size 2 x 32 KBytes
L2 unified cache size 6144 KBytes
Core 1
Core speed 1596.0 MHz
Multiplier x 6.0
Bus speed 266.0 MHz
Rated Bus speed 1064.0 MHz
Temperature 37 °C
Thread 1
APIC ID 0
Core 2
Core speed 2660.0 MHz
Multiplier x 6.0
Bus speed 266.0 MHz
Rated Bus speed 1064.0 MHz
Temperature 36 °C
Thread 1
APIC ID 1
Memory
Type DDR2
Size 4096 MBytes
Channels # Dual
DRAM frequency 399.0 MHz
CAS# Latency (CL) 6.0 clocks
RAS# to CAS# delay (tRCD) 6 clocks
RAS# precharge (tRP) 6 clocks
Cycle time (tRAS) 18 clocks
SPD
Number of SPD modules 2
Slot #1
Type DDR2
Size 2048 MBytes
Manufacturer Hyundai Electronics
Max bandwidth PC2-6400 (400 MHz)
Part number HYMP125S64CP8-S6
Serial number 00007112
Week/year 52 / 08
SPD Ext. EPP
JEDEC #3
Frequency 400.000000 MHz
CAS# latency 6.0
RAS# to CAS# 6
RAS# Precharge 6
tRAS 18
tRC 24
Voltage 1.8 V
JEDEC #2
Frequency 333.333344 MHz
CAS# latency 5.0
RAS# to CAS# 6
RAS# Precharge 6
tRAS 16
tRC 21
Voltage 1.8 V
JEDEC #1
Frequency 266.666656 MHz
CAS# latency 4.0
RAS# to CAS# 4
RAS# Precharge 4
tRAS 12
tRC 16
Voltage 1.8 V
Slot #2
Type DDR2
Size 2048 MBytes
Manufacturer Hyundai Electronics
Max bandwidth PC2-6400 (400 MHz)
Part number HYMP125S64CP8-S6
Serial number 02008065
Week/year 52 / 08
SPD Ext. EPP
JEDEC #3
Frequency 400.000000 MHz
CAS# latency 6.0
RAS# to CAS# 6
RAS# Precharge 6
tRAS 18
tRC 24
Voltage 1.8 V
JEDEC #2
Frequency 333.333344 MHz
CAS# latency 5.0
RAS# to CAS# 6
RAS# Precharge 6
tRAS 16
tRC 21
Voltage 1.8 V
JEDEC #1
Frequency 266.666656 MHz
CAS# latency 4.0
RAS# to CAS# 4
RAS# Precharge 4
tRAS 12
tRC 16
Voltage 1.8 V
Mother Board
Manufacturer Dell, Inc.
Model 0P786H
Version A04
Chipset vendor Intel
Chipset model PM45
Chipset revision 07
Southbridge vendor Intel
Southbridge model 82801IM (ICH9-M)
Southbridge revision 03
BIOS
Brand Dell Inc.
Version A04
Date 11/26/2008
Monitor
Name Generic PnP Monitor on ATI Mobility Radeon HD 3650
State enable
State primary
Monitor Width 1920
Monitor Height 1200
Monitor Bit 32
Monitor Frequency 60
Device: \\.\DISPLAY1\Monitor0
Name Default Monitor on ATI Mobility Radeon HD 3650
State disabled
State removable
Monitor Width 800
Monitor Height 600
Monitor Bit 32
Monitor Frequency 60
Device: \\.\DISPLAY2
ATI Mobility Radeon HD 3650
GPU M86
Device ID 1002-9591
Subvendor Dell (1028)
-
I have several projects with 1000's of little clips in them- that have become unlinked- normally I can just use link media and that resolves it, but it seems like there has been either name changes to them (numbering in project panel seems different) or pathway to my ext hard drive has changed-help appreciated!!!
Are you on a Mac, or a PC?
If PC, what OS version do you have?
The easiest way to find out exactly how your version of Windows sets drive letters is to go to Help, then type in "drive letter," without the quotation marks in the query box. You will then get all references to drive letter, and choose Setting Drive Letter, or similar syntax. That will step you through the process, and probably even provide a link to the disc management utility for your version.
If you are on a Mac, then it would be Volume Name, but I cannot help with anything more than that, being a PC-only guy.
Good luck,
Hunt -
I need help with my new ipod on windows me
I bought myself an ipod in the states (usa) i was told it was universal & can be used in the uk! i have windows ME & was also told this would be compatible with this computer but once i tried to download my software of the cd & put in my details of the ipod it came up with the following error message:ERROR 1904.MODULEC:\PROGRAM FILES\IPOD\IPOD UPDATER 2005-02-07\IPOD UPDATER EXT.Dll FAIIED TO REGISTER .HRESULT-2147220473 CONTACT YOUR SUPPORT PERSONELL.
can any one help????
aslo i was told once downloaded onto my p.c i then cant use my ipod on another p.c this does not make any sense say if you upgrade your p.c does this mean you then cant use your ipod anymore ??? please help me ???Hello Andrew,
Was the reply I gave you in the other post you made of no help?
I explained that Windows ME is not compatible, but you can get it work with a little messing around, and once again, here's a link on how to do it.
Guide to iPod and Windows ME.
As I said previously though, you won't be able to use iTunes.
See my other answer to you here.
Jeff Bryan, "Need help with my iPod." #4, 06:13am Aug 8, 2005 CDT -
Help with if statement in cursor and for loop to get output
I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM......... jim@ aol.com.... 284087............. 9/28/2006.......10/5/2006...........690
JIM......... jim@ aol.com.... 292709............. 3/20/2007.......3/28/2007............516
KIM......... kim@ aol.com.... 185083............. 8/31/2004.......2/9/2006............. 928
KIM...........kim@ aol.com.... 190121............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159............. 2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237............. 2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109............. 9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647............. 11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631............. 4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922............. 7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332............. 1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336............. 1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............ 1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............ 48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............ 175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PManalytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results. -
I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.
-
Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance! -
Help with HP Laser Printer 1200se
HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie GibsonSorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Going to Australia and need help with Power converters
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies. -
Creation of context sensitive help with pure FM 12 usage doesn't work
Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000 1
#define 2022 2
#define 2030 3
#define 2180 4
#define 2354 5
#define 2560 6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
MohiHi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi -
Need help with Boot Camp and Win 7
I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
MikeMike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger -
Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge
can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found
That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum] -
Be grateful for your help with Photoshop Elements which I have been using for several years.
Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response
The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.
-
Query Help with Parent, Child, Child's Child
Hi all,
Need some help with a query. I'm trying to create a stored procedure that is sort of like a Customer, Order, Order, Details. In my situation the tables are different but nevertheless, I want to grab all the fields from the Parent, Child,
and Childs' Child, where the Parent.ParentID = @Parameter. I tried this:
CREATE PROCEDURE [dbo].[spGetCompleteProjectXML]
@ProjectID int = 0
AS
SELECT *,
(SELECT *,
(SELECT *
FROM PageControls
WHERE (PageControls.ProjectPageID = ProjectPages.ProjectPageID))
FROM ProjectPages
WHERE (ProjectPages.ProjectID = @ProjectID))
FROM Projects
WHERE (ProjectID = @ProjectID)
FOR XML AUTO, ELEMENTS
RETURN 0
I think I'm close, but it was my best effort. Could someone help?
thanks in advanceHi TPolo,
Regarding your description, are you looking for a sample like below?
CREATE TABLE customer(customerID INT, name VARCHAR(99))
INSERT INTO customer VALUES(1,'Eric')
INSERT INTO customer VALUES(2,'Nelson')
CREATE TABLE orders(orderID INT,customerID INT)
INSERT INTO orders VALUES(1,1);
INSERT INTO orders VALUES(2,1)
INSERT INTO orders VALUES(3,2)
INSERT INTO orders VALUES(4,2)
CREATE TABLE orderDetails(orderID INT,item VARCHAR(99))
INSERT INTO orderDetails VALUES(1,'APPLE1')
INSERT INTO orderDetails VALUES(1,'BANANA1')
INSERT INTO orderDetails VALUES(2,'APPLE2')
INSERT INTO orderDetails VALUES(2,'BANANA2')
INSERT INTO orderDetails VALUES(3,'APPLE3')
INSERT INTO orderDetails VALUES(3,'BANANA3')
INSERT INTO orderDetails VALUES(4,'APPLE4')
INSERT INTO orderDetails VALUES(4,'BANANA5')
SELECT customer.customerID,customer.name,
(SELECT orderId,
SELECT item FROM orderDetails WHERE orderID=orders.orderID FOR XML AUTO,TYPE,ELEMENTS
FROM orders Where customerID=customer.customerID FOR XML AUTO,TYPE,ELEMENTS)
FROM customer WHERE customerID=1
FOR XML AUTO,ELEMENTS
DROP TABLE customer,orderDetails,orders
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support
Maybe you are looking for
-
Firefox 35 crashes everyday for no reason on Mac OS 10.9.5
As the title says. One second I'm using it and the next it's gone, there no freezing, nothing special, it just quit and restarts, up to several times a day. It never did that since I started using it many years ago. It started happening not long afte
-
Sales office in Customer line items
Presently using FBL5N for details of customer line items. Now the user wants the customer details Sales office wise. Tried to change the selection views of logical database DDF used in this program but couldn't as it doesn't include table KNVV. SPRO
-
Hello, My client have some FI flatfiles with caluclations in it they want bring that data to BI. today i have meeting with finance user he is going to explain me about all files. So can you please tell me what are the questions ca
-
Print Shot List in iMovie (10.0.5)
Is there a way to print the Shot List for a trailer in iMovie (10.0.5)? It was an option in iMovie '11 but it looks like the ability to print has been removed from iMovie.
-
No EQ + Cant Edit Song Info...Please Help
Hello, I can not edit the information of each song and since installing the latest version of iTunes (7.7). Also I no longer have access to my Equalizer function..am I doing something wrong or is iTunes having issues??? Thank you.