Help with audiobooks and iPod

I downloaded/installed the applescript from Doug's Applescripts for iTunes to convert audio CD's to audiobooks in iTunes. Things went well until I synced the new audiobooks to my iPod. Below are the two major problems I've experienced.
1. I had 3 books in my iTunes Library which were converted and made bookmarkable using Doug's applescript . As promised the books showed up in the audiobooks of iTunes. They appeared correctly (alphabetically by book title) in iTunes. However, the books were all scrambled together after being synced to my iPod. That is I had about 30 Track 1's, (3 books, 10 disks each), then 30 Track 2's, 30 Track 3's, etc. all the way through to 30 Track 99's. What did I do wrong, or did i skip a step somewhere, and how to I correct this so that I can listen to the books?
2. The sound quality is poor. The sound is scratchy - it sounds like you are listening to an old worn out record on a turn table. Any suggestions to clear up the noise?
3. If there is no fix for the above issues, how to I convert the books back to their original form, so that they will show in the Music playlist section of the iTunes library.
Thanks

Hey, I have a question along similar veins. This is driving me a bit crazy.
How do I separate my various audio books into their separate folders just like how it is automatically done for music?
Right now I have a big list of all of my audio book files, and the only sorting option is apparently alphabetic.
1. Is there a way to separate these into albums based on the album info field? I tried this and it doesn't work.
2. Is there a way to sort and play these files based on the track number and not alphabetically? I tried track field and that didn't work either.
Please advise,

Similar Messages

  • Help with itunes and ipod

    I want to copy some songs from my ipod to my pc, but I don`t know how to do it.
    My ipod isn't syncronized with my library and I don't know which other way to do it.
    I just downloaded iTunes 7, but I think there area few bugs.
    The PREFERENCE window is way to big and I can't save hte changes.
    please, if anyone can help me!

    "I want to copy some songs from my ipod to my pc, but I don`t know how to do it."
    If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers has been introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    iPod Access Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    CopyPod Windows Only
    "I just downloaded iTunes 7, but I think there area few bugs. The PREFERENCE window is way to big and I can't save hte changes"
    Click on the chevron > to the left of the iPod icon in the Source list. This will display the various icons for the iPod itself, Music, Movies, TV Shows and Playlists. Click on Music and you'll see the traditional song view with the information at the bottom.

  • Need help with Itunes and IPod Shuffle

    I have the latest updates for both Itunes and the IPod Shuffle. I have Itunes on two different PCs, one for the wife and one for myself. I got a new Nano and gave my wife the Shuffle I had and she gave her shuffle to a friend. Everything has worked just fine in the past. When she plugged in my shuffle it asked if she wanted to sync to this PCs library and she said yes. Everything went fine except that no files will copy to the shuffle. It seems to take a VERY long time to sync as well. I tried dragging a song or a playlist but it just sits in sync mode for a long time and then when it's done there is no music on the shuffle. I don't understand the problem. When I attach the shuffle to my PC it asks if I want to sync to the library and everything works, files transfer, no problem. Putting back on her PC and going through the resync business again results in the same situation. Help!

    Hello! no, you haven't stumped the pros. This is a user board. No pros here to stump, just volunteers.
    Shuffles are only designed to sync with one PC. Connect it to your PC and restore it to factory settings. Eject it. When your wife connects it to her PC, it should get recognized.

  • I need help with photos and iPod

    I put a bunch of my pictures on my iPod to view them. They were saved onto an external harddrive, which is now dead. How can I get the pictures from my iPod back onto my computer?
      Windows XP  

    Is there a program thats free? Im fine with this one
    if now, its just I have a ton to get back and the 25
    per day is kind of low.
    That's the only one I know of. You might want to try searching on Google or a similar search engine.
    evangosensgo,
    No, I don't work for Apple
    btabz

  • I need help with itunes and ipod on my phone

    ok so for as long as ive had my phone ive downloaded and bought music from my itunes on my phone. well this past year ive bought 5 new songs. i can find them in my ipod or on my purchased items, i get recipts sent to me from itunes but have not succesfully heard the songs how do i fix this. ive spent $15 or more. for nothing. can someone help me. or tell me how i can get my money back.

    On the receipt there should be a "Report a Problem" link.  Click that and let iTunes support know your situation, they can resolve this for you.

  • Desperatly need Help with itunes and ipod argument!!1

    Itunes will work, slowly, until i plug pod in and then it sync's for about 10 secs and then every program running freezes. Itunes refuses to respond, cant close or open additional applications, can move external windows but they leave a ghost accross the screen.
    i have done all the 5 R's to Pod, reinstalled itunes 3 times and run a virus scan twice - im at witts end, i hope someone can help. I have over 2000 songs on itunes and i cant do anything with them or my pod.
    If anyone can help please either reply or contact me on: [email protected]
    cheers

    Hello! no, you haven't stumped the pros. This is a user board. No pros here to stump, just volunteers.
    Shuffles are only designed to sync with one PC. Connect it to your PC and restore it to factory settings. Eject it. When your wife connects it to her PC, it should get recognized.

  • Need Help with itunes and ipod

    my computer crashed and I lost everything. However, all my music is on my ipod. How do I transfer my music from my ipod to itunes. I transfered all my purchased music but how do I put in all the music I added from cd's?????? I do not want to loose all the music I added because I don't have most of the cd's anymore. What do I do? Thanks!!!!

    Take a look at some of these other posts; other people have had the same problem
    http://discussions.apple.com/thread.jspa?messageID=1545861&#1545861 (buegie’s post)
    http://discussions.apple.com/message.jspa?messageID=797432#797432 (MacMuse's post)
    http://docs.info.apple.com/article.html?artnum=61131
    http://discussions.apple.com/thread.jspa?messageID=4717269&#4717269 (Jeff Bryan's post)
    5g video Ipod 30G   Windows 2000   iTunes 7.1.1.5

  • HT3209 Help with Movies and Ipod Nano

    Can an SD movie download to an Ipod Nano?

    I have to disagree, for some reason 1 out 5 movies i have purchased through itunes have been able to be uploaded to our Ipod Nano. Don't understand why, have tried to file convert through choose file, create new version, but that option won't highlight. Still looking for help

  • Help with my itunes/ipod

    Please can someone help......I am a complete novice with itunes and ipod and i seem to be having some difficulty....I have managed to download all my music into itunes and have also managed to sync the music to my ipod however everytime I try and add new songs it 'syncs' the complete library again and as I have so many songs it takes a very long time to sync (about 35 mins). I have tried setting up a playlist and just ssyncing the playlist however then all the other music disaapears from my ipod and only the few songs in the playlist remain. Does itunes have to sync everything everytime I plug my ipod in? Is there anyway that I can keep all my music on my ipod and just add new songs and not have to sync the whole library time after time? I would really appreciate some help. I have tried the online tutorials but they are not answering my question
    Many thanks
    Amanda

    mandymoomoo wrote:
    ... however everytime I try and add new songs it 'syncs' the complete library again and as I have so many songs it takes a very long time to sync (about 35 mins).
    Depending on the size of your library, memory, processor speed etc, iTunes can spend a long time deciding which tracks might need to be updated on the iPod but unless something has gone wrong it should then only copy new or updated tracks and delete those you have removed from your library. My almost full 160gb iPod has just taken about 20 mins to sync, with only the last minute or so being used to transfer ~100 updated files.
    If all your files are being copied each time you sync then I suspect the iPod library is getting corrupted. One possible cause for this is an irritating feature called write-behind caching. It could be that when you eject the iPod, iTunes decides it's finished and asks for the device to be disconnected when Windows still has data to write to the disk.
    *Disable write-behind caching*
    Right-click on your iPod in *My Computer* and select Properties and then the tab that says Hardware. Highlight the selection that says *Apple iPod USB Device* and select Properties. Under the tab that says Policies make sure that *Optimize for quick removal* is checked.
    While I would generally recommend auto-sycning if it is not working well for you then you might try switching to the manually manage option in which case you get to control manually which tracks are added to or removed from the iPod. This can be a much faster way to add a few tracks but makes it much harder to keep information in the iTunes & iPod libraries in step.
    tt2

  • Help with writing and retrieving data from a table field with type "LCHR"

    Hi Experts,
    I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
    Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
    Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
    Thanks in advance,
    C
    SAVING THE LIST DATA TO DB
    DATA: L_WA(800).
    LOOP AT T_TAB into L_WA.
    ZDBTAB-DATALEN = STRLEN( L_WA ).
    MOVE: L_WA to ZDBTAB-RAWDATA.
    ZDBTAB-LINENUM = SY-TABIX.
    INSERT ZDBTAB.
    READING THE DATA FROM DB
    DATA: BEGIN OF T_DATA,
                 SEQNR type ZDBTAB-LINENUM,
                 DATA type ZDBTAB-RAWDATA,
               END OF T_TAB.
    Select the data.
    SELECT linenum rawdata from ZDBTAB into table T_DATA
         WHERE repid = w_repname
         AND rundate = w_rundate
         ORDER BY linenum.
    Populate calling Internal Table.
    LOOP AT T-DATA.
    APPEND T_DATA to T_TAB.
    ENDLOOP.

    Hi Anuj,
    The unicode flag is active.
    When I run our report and then to try and save the list data a dump is happening at the following point
    LOOP AT T_TAB into L_WA.
    As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
    When I try to load a saved list the dump is happening at the following point
    APPEND T_DATA-RAWDATA to T_TAB.
    T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
    In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
    Regards
    C

  • Don't know how to sync music on mac with iphone and ipod

    don't know how to sync music on mac with iphone and ipod
    need to also know how to recover original library of ipod as it seems as though
    it has now sync'ed with iphone & lost all my music

    Start HERE

  • Help with count and sum query

    Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
    SELECT 'ST' LEDGER,
    CASE
    WHEN c.Category = 'E' THEN 'Headcount Exempt'
    ELSE 'Headcount Non-Exempt'
    END
    ACCOUNTS,
    CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
    'MARCH_12' AS PERIOD,
    COUNT (a.empl_id) head_count
    FROM essbase.employee_pubinfo a
    LEFT OUTER JOIN MMS_DIST_COPY b
    ON a.cost_ctr = TRIM (b.bu)
    INNER JOIN MMS_GL_PAY_GROUPS c
    ON a.pay_group = c.group_code
    WHERE a.employee_status IN ('A', 'L', 'P', 'S')
    AND FISCAL_YEAR = '2012'
    AND FISCAL_MONTH = 'MARCH'
    GROUP BY a.company,
    b.district,
    a.cost_ctr,
    c.category,
    a.fiscal_month,
    a.fiscal_year;
    which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

    Hi,
    Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
    Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
    user610131 wrote:
    ... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
    I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
    You may want both a sub-query and a different GROUP BY clause. For example:
    WITH    got_group_by_columns     AS
         SELECT  a.empl_id
         ,     CASE
                        WHEN  c.category = 'E'
                  THEN  'Headcount Exempt'
                        ELSE  'Headcount Non-Exempt'
                END          AS accounts
         ,       CASE
                        WHEN a.company = 'ZEE'
                        THEN 'OH'
                        ELSE 'NA'
                END          AS market
         FROM              essbase.employee_pubinfo a
         LEFT OUTER JOIN  mms_dist_copy             b  ON   a.cost_ctr     = TRIM (b.bu)
         INNER JOIN       mms_gl_pay_groups        c  ON   a.pay_group      = c.group_code
         WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
         AND        fiscal_year           = '2012'
         AND        fiscal_month          = 'MARCH'
    SELECT    'ST'               AS ledger
    ,       accounts
    ,       market
    ,       'MARCH_12'          AS period
    ,       COUNT (empl_id)       AS head_count
    FROM       got_group_by_columns
    GROUP BY  accounts
    ,            market
    ;But that's just a wild guess.
    You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
    Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

  • MOVED: [Athlon64] Need Help with X64 and Promise 20378

    This topic has been moved to Operating Systems.
    [Athlon64] Need Help with X64 and Promise 20378

    I'm moving this the the Administration Forum.  It seems more apporpiate there.

  • Help with audiobook

    Hello,
    I have an audiobook on CD and just tranferred it to itunes. It took me forever to transfer the tracks from the music to audiobook folder because i had to do it one track at a time by converting each file. anyways, now I'm having two more problems:
    1. When I listen to the book on itues it leaves off the last 3-4 seconds of a track and starts playing then next track.
    2. When I try to listen on my ipod, it stops after every track instead of going straight into the next one.
    Hope someone can help.
    Thanks.

    What device did you buy and download it on, and you're sure that it's not on it ? If on your computer's iTunes then does the other part show/download via the Store > Check For Available Downloads. If on an iOS device then the other part doesn't show in the Downloads tab in the iTunes store app, and hasn't finished downloading yet ?
    If not then try contacting iTunes Support via the 'report a problem' link from your purchase history (audiobooks are currently a one-time only download, so they will either need to refund or grant you a re-download) : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that audiobook and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
    If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

  • Multiple problems with itunes and ipod touch

    I don't even know where to begin explaining all the problems I've had with itunes and my ipod touch, along with the troubleshooting that I've done to no avail.  Now, I'm totally frustrated.  So, here I am hoping that I can get some help from someone.  I spent almost $400 for my ipod touch and don't want to have to give up on it.
    First, in case you need to know, I have the latest version of iTunes (10.2.2.14), an iPod Touch.  My Windows edition is Windows Vista with Service Pack 2.  My system has the following:
         Manufacturer: Hewlett-Packard Company
         Model: m9150f
         Processor:  Intel(R) Core(TM)2 Quad CPU   Q6600 @ 2.40GHz  2.40 GHz
         Memory (RAM):  3.00 GB
         System type:  32-bit Operating System
    Next, in order to simplify what I have to say, I'll just briefly tell you what problems I've encountered, what I've done, and the results:
         1.     iPod not displayed in Computer when plugged into USB port
         2.     no device displayed in iTunes
         3.     unable to sync music and photos from my computer to iPod
         4.     have gone through and completed all troubleshooting two times to no avail
         5.     lost all settings and apps on my iPod and can't restore and/or retrieve them (my fault for erasing the info)
         6.     can't get iTunes to recognize(?) my iPod, after plugging it into the the USB port, in order to possibly restore it to working order
    If I haven't provided enough info, please let me know.
    I'll appreciate any help that you can give in order to resolve these issues.
    Thank you.
    Chris

    chrisfromroy wrote:
         4.     have gone through and completed all troubleshooting two times to no avail
    did that include this support article ?
    also, have you made sure Apple Mobile Device Service is installed and started ?

Maybe you are looking for

  • How can I go back and forward on a webbrowser using trackpad?

    Hello I upgraded my os with Lion. in the fore version, I could use three fingers to go back and forware on the webbrowser, but now I can't. I can't find any options in any pages. I think that was very useful.. How can I do it again?

  • Creating a report with YTD values

    Hello experts , I have a requirement wherein I have to modify a few Cash Spend reports in monthly movements format to Year to Date (YTD) format.I am a bit confused with the terms Monthly movements and Year to Date , can anyone who has some knowledge

  • Using E-recuitment 600 on ERP 6.0 Ehp4 (NW 7.01)

    Hello, We have upgraded ERP system to ERP6.0 Ehp4 on NW 7.0 Ehp1. Now we are planning to implement E-Recruitment. We are thinking of using development system in production support landscape for E-recruitment implementation project.. yes same developm

  • If I upgrade my phone will I lose my unlimited plan???

    I was told a while back that if I were to upgrade my phone it would alter my plan and I would no longer have my unlimited everything plan. I was wondering if this is true and if so what is the reasoning behind that???

  • Is Oracle Configuration Manager Available for Hyperion Planning Servers?

    The "My Oracle Support" site (https://support.oracle.com) describes the values of installing the Oracle Configuration Manager on servers. Question: is this available for the Hyperion products or just Oracle databases? If available for Hyperion produc