Help with authenticating (It does this on every folder)

I recently started working for a new company. When I got there the computer already had a profile created for me by the old art director. His profile was totally gone as I was the one replacing him. Now here comes the big problem. I can not create any new folders or files and save them in the harddrive at all. I can only create folders or files on the desktop and then drag them into the harddrive. When I do this it tells me I have to authenticate first. Once I type in my password it finally appears when I want it to go in the harddrive. Someone please help as this is annoying and time consuming.

Welcome to the Forum.
Go into Applications/Utilities/Disk Utility and run Repair Permissions and see if that helps.

Similar Messages

Right now I am working in a temporary site format. I am hosting the website on my own computer. How to I take it from a temporary site to a live site? Do I need to upgrade my service with abode and does this cost more per month?

Right now I am working in a temporary site format. I am hosting the website on my own computer. How to I take it from a temporary site to a live site? Do I need to upgrade my service with abode and does this cost more per month?

Hi Traci,
To push the site live, you will need to:
Publish a trial site on BC (File menu> Publish)
Then, go to the admin dashboard of your site and the launch the site live by paying for it or redeeming a free site.
Add domain to the site
Change name-servers at domain registrar
For steps 3 and 4, kindly refer to the following link:
http://docs.businesscatalyst.com/user-manual#!/site-settings/site-domains/change-the-domai n-name-of-your-site
The following link might also be helpful:
Launching a Muse Site | Adobe Muse CC
Regards,
Sonam

I want to use asus air charger to charge my ipad 4 with my computer. does this software harm my ipad battery?

Hi , I want to use asus air charger to charge my ipad 4 with my computer. does this software harm my ipad battery? can I use it? thanks

Look at this description and review. http://asus-ai-charger.en.softonic.com/
The app is free, So it won't cost to try. The iPad 4 comes with a 12W wall charger. Most computer USB ports output only 2.5W, so even if you get a 50% increase, it will still take a long time to charge your iPad.
Bottom line - Use the wall charger.
Here's some battery/charging info.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

TS3988 I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

Welcome to the Apple Community.
You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud.

HT1386 I tried to back my iphone to itunes & then got the message "Itunes has detetected an Iphone in recovery mode. You must restore this Iphone before it can be used with Itunes." Does this mean that I've lost everything & have to restore to original

I tried to backup my iphone to itunes and then got a message "Itunes has detetected an Iphone in recovery mode. you must restore tghis Iphone before it can be used with Itunes." Does this mean I've lost everything on my Iphone & have to restore to it's original settings?

Is the device actually in recovery mode? What is showing on the display?
If it's the "Connect to iTunes" screen, then the information is already lost.
If you've forced the device in DFU mode... reboot it and simply sync with the computer.

I have an iMac with OS x 10.8. Every folder t hat opens has (in the gray zone on top) file icons and jpg photos listed. How do I remove them?

I have an iMac with OS x 10.8. Every folder t hat opens has (in the gray zone on top) file icons and jpg photos listed. How do I remove them?

Control-click each and choose Remove Item, or Command-click them and drag them out.
(85250)

I need to use my iMac to run some Windows software and was thinking of using Parallels Desktop 9 to help with this. Do you still have to partition your drive with Parallels and does this leave you open to viruses?

I need to use my iMac to run some Windows software not available for Mac and was thinking of obtaining Parrallels Desktop 9 to help with this. If I use Parrallels do you still have to partitian your drive and does this leave you open to viruses?

You do not have to partition your drive - Parallels creates a disk image which contains your Windows installation. You do have to exercise anti-virus measures in the Windows partition, although such malware cannot affect the Mac filesystem.
Matt

Why does this happen EVERY time??

I am disabled, a low phone user but use broadband a fair amount. Being on a fixed, low income I need to know what I'm paying out each month and keep it as low as possible. To that end I end up having a conversation each year with BT to get a decent deal.
Each year they appear to help me, on paper; I get reasonable quotes and go ahead with the contract. To make sure I keep my monthly payments down, I keep an eye on my billing online and make additional payments should I go over the usage allowance of my particular plan.
And then EVERY YEAR, they get the monthly payments wrong. Last year, out of the blue they took £44 per month when it should have been £34; I was refunded. This year, with a quoted monthly charge of £31-and-change, they have taken £37.50 and this despite me making - as usual, if it's required - an additional payment covering over usage on my last bill BEFORE the new contract was taken out.
I had asked for, and been given, a written total of the monthly charges.
My account page still shows "we will continue to take £34 on or just after the 3rd of the month".
And then they randomly take - as they did last year - a completely different sum altogether!
BT are in breach of the Direct Debit Guarantee by doing this; the rules say:
"If there are any changes to the amount, date or frequency of your Direct Debit the organisation will notify you (normally 10 working days) in advance of your account being debited or as otherwise agreed."
As (1) they have not notified me: they have clearly stated they will take a given amount and (2) this given amount is higher than the monthly charges anyway and (3) I have, as they suggest if you wish to avoid an increase, made an additional payment.... WHY ARE THEY DOING THIS?
I am tired of the constant battle with BT to just stick to what they agreed to charge me. The fact that I'm writing this at three in the morning should indicate the levels of stress this sort of thing can produce. I have emailed via the 'Contact Us' page on the website about this but no doubt I will get some scripted reply, if I'm lucky a small refund and then the same thing will happen AGAIN next year. I just want to know why this keeps happening!

I am on the monthly payment plan because nobody at BT has told me there is any alternative!
Each year there I have a long, in-depth conversation with the person who sets up the contract for the next year but the gist of the thing is 'I'm not going to be paying more than [x amount] per month, am I? Because I can't afford any more'' and each year the person says that no, in fact I should be paying less... and then without notice and even with the bill saying 'We will continue to take....' a totally different - and higher - sum disappears from my bank account.
Then I go through the painful process of writing to complain about this, get some sort of sum refunded and then the payments go through at the level they should, with me paying any additional (usually small) amounts for usage over the allowance. Until contract end when we start all over again...
Even if the amount they seem to randomly decide on is based on some sort of forecast, this should not be happening as I am doing what they instruct me to do on the bill to keep my payments the same.
So something is going wrong, on many levels.
At no point have I been offered the sort of 'monthly billing' described here; maybe there is some reason I am not allowed it. Unfortunately 'whole bill' direct debit payment is beyond me. I really need to know what I will be paying each month and I need BT to correctly take that amount, as agreed, each month, from the get-go.
It shouldn't be that hard really! Does anyone from BT read these forums? Can somebody take this on and finally get this straight, please?

Safari 5.1.5 shows .pdf web pages as black. The same thing happens with Firefox. Does this have something to do with an AdobePDF plug-in?

Safari 5.1.5 shows .pdf web pages as black. The same thing happens with Firefox, at least with the few pages I've checked. Does this have something to do with an AdobePDF plug-in? I recently had to restore my system from Time Machine backup.

The following appears to have I solved my problem with Safari 5.1.5, 5.1.6 and 5.1.7. I also have Adobe Acrobat Pro 9 installed.
Follow mbuffy's post dated May 10, 2012 directly above, and
Do NOT allow Adobe Acrobat Pro 9 to perform the "repair" the missing Adobe PDFViewer Plug-in when the window pops up and offers to repair Adobe PDFViewer Safari Plug-in. If Adobe does the "repair," then I can not view .pdf web pages in Safari or Firefox.
FYI, cmmartin0275 posted the following on Sep 8, 2011 in a discussion of "Missing PDF Pluggin" at https://discussions.apple.com/message/16119130#16119130:
"Just FYI to anyone with this problem...this is straight from Adobe's website.
"Adobe Reader plug-in and Acrobat plug-in are not compatible with the Safari 5.1 browser, which will ship with Mac OS X 10.7 and for 10.6 in July. Adobe Reader and Acrobat will continue to work as standalone applications on Mac OS X 10.7 and 10.6, and will render PDF documents outside of the browser. In addition, Safari 5.1 renders PDF documents natively. However, the Adobe Reader and Acrobat plug-ins will not function as expected in LiveCycle and Acrobat workflows that require either plug-in to render PDF documents in Safari 5.1."
They also go on to say they hope to have a solution or work around before the end of 2011..."
Thanks for the help.

Help me...does this look good?!?!?

Hey all,
I want a G4 to use in my music studio, have found one on ebay, does this look good to you...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8792713494&rd=1&sspagename= STRK%3AMEWA%3AIT&rd=1
If you can't access that, basically it's this...
Computer is in excellent condition, has been well loved and well upgraded:- 200GB hard disk (5400rpm) Dual 867 MHz, 1MB L3 cache per processor 1.25GB DDR SDRAM 16x DVD+/- RW (Superdrive) 4x DVD+ RW (original Superdrive) 4x USB 2.0 ports 2x USB 1.0 ports 2x Firewire ports Airport Card (WiFi) Ethernet Card 56kbps Modem Digital in/out for audio Again it is in excellent condition, well loved.
Oh and there is still 2 slots left for memory upgrade and 4 other slots for your other upgrades, i.e. more firewire, usb, graphics card, music adaptors etc. I used the machine mostly for video editing and graphic design and it handles everything I throw at it. It is a beast of a computer but sadly by job entails I have a laptop now I will also include all the software that comes with it.
Think it sounds good? What price do you reckon???
Thank you!
Olivia x
G4 I hope

If you do decide to bid I'd keep in mind that it's the base model MDD G4 with a 133MHz system bus (the others had 167MHz). It's also one of the original models that got the nickname of wind tunnel as they could be fairly noisy, so much so that Apple under went a power supply replacement program using quieter fans, which may be an issue if it's intended for audio use. I'm not sure whether it's had the power supply replaced, but Verax also offered a noise reduction kit, which may give some indication of how noisy it can be.
I'm not trying to put you off though, but I'd keep the above in mind if you do intend to place a bid.

How can I do the same as Windows Explorer with datemodified:11/6/2013 .. 11/13/2013 showing only changed files with path in tree and NOT every folder along the way as Finder seems to do by default? Thanks!

I'm an Apple newbie.
I'd like to be able to list each file in the "Desktop" tree (ie; on the desktop, or in any folder on the desktop, etc.), along with its path, that has been modified since a certain date.
When I use Finder to do a similar search, I get tons of output including every folder in the path to the modified file, etc. Although I can view the path to the individual files in the output, I can't for example, order the output by path, etc. Very difficult to sort through. I'd love to have output like the example above - just the filename and path for each changed file. Possible? Thanks in advance!
Wayne

The file structure is a little complex. I will use inbox as an example.
Inbox (a large file with no file extension)
Inbox.msf ( An index of inbox with tags etc. Can be deleted with only loss of tags)
Inbox.sdb (a folder, indicating that the folder within Thunderbird has a sub folder.
POP mail is stored in
Appdata/Roaming/Thunderbird/Profiles/*.default/Mail/[Server name]/
Local folder is stored in
Appdata/Roaming/Thunderbird/Profiles/*.default/Mail/Local Folders/
As long as you do not overwrite, you can copy and paste whole folder trees into local folders (stuff on your old computer under a mail account is best relocated to local folder and then sorted as necessary afterwards.
Note that you should delete foldertree.json after making those sorts of copies (it forces a full refresh of the folder tree, no cache) and under no circumstances copy data with Thunderbird running. It can irrevocably corrupt things

Can you help with Tcode to fill this SETUP table? not working for me.

Hi,
For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
1. Can you help me with the tcode to fill the setup table for 2LIS_11_VASCL?
2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
2LIS_11_VAHDR                     Sales Document Header Data
2LIS_11_VAITM                     Sales Document Item Data
2LIS_11_VAKON                     Sales Document Condition
2LIS_11_VASCL                     Sales Document Schedule Line
2LIS_11_VASTH                     Sales Document Header Status
2LIS_11_VASTI                     Sales Document Item Status
2LIS_11_V_ITM                     Sales-Shipping Allocation Item Data
2LIS_11_V_SCL                     Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL                     Sales Document Order Delivery
Thanks

Ok,
I tried that and it basically bring you to OLI7BW as suggested above.
1. At this point, how do you know which of these it is actually filling:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
Thanks

Can anybody help with some subtleties to this code?

Hello,
I was wondering if anyone could take a look at the code in general for me, which is to go in an 'effects' pedal. The first while loop is for a footswitch that either reads high or low. It controls the mode of the pedal. the first mode is the default, where no signal manipulation occurs, and what comes in the audio input just comes out; the second mode stores data (fundamental frequency, average FFT amplitude from 3 kHz to 5 kHz) from the E string of a guitar, which is plucked after that mode is actuated; the third mode does the same for the A string; and the final mode takes in a note on the E or string, recognizes it as either on the E or A string, and adjusts the frequency content to be in tune based the data stored in modes 2 and 3. then the new magnitude vector is put through an inverse FFT and output through the DAC and sounded.
What I'm curious to know is, are there any blatant errors I've made? Will the signal coming out of the inverse FFT be sounded through the DAC? does it need to be changed from a double to an I32? I am trying to debug, but right now I'm having problems getting the correct output voltages on the Blackfin (the SPORT 0 pinout doesn't seem to match what is on the board....).
also, I was wondering if I will lose any phase information on the signal that I get out compared to the signal I put in. Will it be detectable by ear? Or would it all sound the same? along with the phase change for some signals, using an inverse FFT resulted in a loss of amplitude (from about 1 to on the order of 10^-5. that's a lot!). but when the test program was played on my computer, the phase change was not noticeable from the output signal, and neither was the magnitude change! the output played at the same volume as in the input, despite the waveform chart on the front panel showing an amplitude five orders of magnitude less! can you help explain that to me? what can I do, will it matter coming out of the Blackfin and into an amplifier?
i appreciate any input anyone can give me on all this!! thank you!!
Attachments:
102 project.vi ‏287 KB

Hi noahgrant,
I've had a look at your vi and can make some suggestions that you can try.
From what I can see, your while loop with the wait timer of 100 ms and continue if true condition on it (we shall cool this loop 1) will always keep running.
The other while loop (loop 2) is nested within a couple of case structures and will only run once (false to a continue if true condition). The default case has a different condition and will always run, instead.
From what I can make of this, loop 2 and all its case structures will only run once (except for case 0, default). WHEN it runs will depend on how it was compiled on the Blackfin - case structure/loop2 may go first or loop 1 will go first.
If you want loop 2 to go first (and only go once) then you need to link the output of the case structure to the input of loop 1 - this can be done by simply wiring up a boolean to it (data flow rules).
If you want loop 2 to always be checking the status of the mode then you need to place the whole case structure within a while loop, to run continuously.
That is a very quick interpretation of what you are trying to do. There are a lot of question marks (missing vi's) and some heavy use of local variables. I would consider using sub-vi's, in particular functional global variables (FGV's).
I hope that helps.

Can anyone help with the scripting on this file?

Hi, I hope someone with a bigger brain can help me out here.
I've got an existing Flash CS3 file that makes up the result at http://www.infusion-set.com/flash/Elearning/Inset30/inset30_eguide.html.
The client has asked if I could add an extra tab at the top after 'Reconnecting' called 'Contact Us' with link to an extra page. All the design has been done in ActionScript 2 with references to XML files for the dynamic content because it's been done in other languages as well.
I've amended the existing XML file with the correct references for a new page and an accompanying .swf file to play in the animation area.
I've attempted a .fla version where I duplicated one of the existing tabs script, changed the XML references and changed the variables where necessary to 'con or 'Con' (representing Contact Us). Unfortunately it made the tab menu go completely off the page and was obviously wrong in some way.
Can anyone give me a clue as to what to change here on the original file as I'm a bit of a novice with ActionScripts, hence me asking.
For reference I've attached HTML files with the original file scripts and my incorrect version. The timeline is 103 frames with the scripts placed at frame 1 and 102
Thanks.
Garry

The buttons are all created using the same library object (but MC), except for the code you have in the revised file does not call on that for the con button.
You have it calling on something with a linkage name of "con", which a quick check tells me doesn't exist--so it is undefined in the code when you try to use it. I found this by using trace(newConBut._x); after its _x value was assigned, as I mentioned you should try. So the first thing you want to do is change the following line from...
var newConBut = _root.attachMovie("con", "conbut", _root.getNextHighestDepth());
To
var newConBut = _root.attachMovie("but", "conbut", _root.getNextHighestDepth());
so that it uses the but MC that serves that purpose in the library. Then you want to correct the _x assignment of the buttons to what I think you had earlier...
newConBut._x = 650-newConBut._width;
newRecBut._x = newConBut._x-newRecBut._width;
Here is a picture of what those changes do (note, without the XML file I had to finagle things just to work, so the biutton labels aren't what they will be)...

Help with an error message: This edit cannot be done...

"This edit cannot be done because a transition would be cut or an item to one side of a transition would become too short."
Can someone please help me understand this one? I have a project with self made lower thirds from a .tif graphic on V2 and a text track on V3. Each track has a 15 frame Edge Wipe on both ends. Within the sequence I have no problem either drag copying both tracks together or even copy/pasting them further down the sequence.
The error pops up when I try to copy/paste to a different sequence. Regardless of whether I try to paste it above my video on V1 or past the video's end I still get that error message.
If I delete the transitions, I can copy/paste just fine and re-add them, but it's so frustrating. I really just want to understand what's going on here. Could someone explain this in layman's terms?
Edit: I should also add that if I Option-Click the Toggle Auto Select for track two, I can paste just fine. Which might lead me to believe that it's trying to paste to track V1 where video is already laid down, except that even if I try to paste after the video it still won't work. If I'm copying track V2 and V3, shouldn't paste automatically past to V2 and V3?
Message was edited by: The Bundok

I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck!

Help with authenticating (It does this on every folder)

Similar Messages

Maybe you are looking for